●Downsized, high ripple version of RWF series
●20% better ripple current at 300Hz than RWF series
●Endurance with ripple current : 5,000 hours at 85℃
●RoHS Compliant
◆SPECIFICATIONS
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
Insulation Resistance
Insulation
Withstanding Voltage
Endurance
Shelf Life
Items
-
25 to +85℃
350 to 450Vdc
±20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
0.25 max.
Capacitance change C(
-
25℃)/C(+20℃)≧0.7
When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering
the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.
When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp
on the insulating sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied for (the peak voltage shall not exceed the rated voltage) 5,000 hours at 85℃.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±20% of the initial value
D.F. (tanδ)≦200% of the initial specified value
Leakage current ≦The initial specified value
Characteristics
◆PART NUMBERING SYSTEM
φ50 : G=6
φ63.5, φ76.2 : G=5
φ89 : G=4
◆DIMENSIONS (Screw-Mount) [mm]
L+5max. G±1
Sleeve (Pb-free PVC : Black)
φD +1.8max.
F±1
Plastic disk
●Terminal Code : LG
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6,800µF:682, 12,000µF:123)
Mounting clamp code (N, B, C)
Terminal code
Voltage code (ex. 350V:351, 400V:401)
Series code
Category
E R
W
GA A A L G N AAA AAA MM
13426789101312518171611 1514
Downsized
RWG
RWF
Please refer to "Product code guide (screw-mount terminal type)"
RWG
S
e
r
i
e
s
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Inverter-use screw terminal, 85℃
●●
Mounting Clamp Code : B
B±1
K±1
E±1
6
4.5
300±50
450
±50
3600
3
8
J
4.5
Mounting Clamp Code : C
φD
50
63.5
76.2
A
78.0
90.0
104.5
B
64.0
76.0
90.0
W
68.0
80.0
93.5
F
22.4
28.0
31.5
φD
50
63.5
76.2
89
E
32.5
38.1
44.5
50.8
K
37.0
43.5
50.0
56.5
F
22.4
28.0
31.5
31.5
J
14.0
14.0
14.0
16.0
A±1
W±1
Vent
<Screw specifcations>
Plus hexagon-headed screw :M5×0.8×10
Maximum screw tightening torque :3.23Nm
* The screw and the mounting clamp are separately supplied and not attached to the product.
(1/2) CAT. No. E1001M
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.