LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWG Series RWG Downsized, high ripple version of RWF series 20% better ripple current at 300Hz than RWF series Endurance with ripple current : 5,000 hours at 85 RoHS Compliant Downsized RWF SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +85 Rated Voltage Range Capacitance Tolerance Leakage Current 350 to 450Vdc 20% (M) I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) Dissipation Factor (tan) 0.25 max. Low Temperature Characteristics Capacitance change C(-25)/C(+20)0.7 (at 20, 120Hz) (at 20 after 5 minutes) (at 20, 120Hz) (at 120Hz) When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage. The following specifications shall be satisfied when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied for (the peak voltage shall not exceed the rated voltage) 5,000 hours at 85. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specified value Leakage current The initial specified value Insulation Resistance Insulation Withstanding Voltage Endurance Shelf Life DIMENSIONS (Screw-Mount) [mm] Mounting Clamp Code : B Mounting 4.5 B1 F1 D+1.8max. Sleeve (Pb-free PVC : Black) 6 30050 Vent 45050 8 J G1 L+5max. Plastic disk D 50 63.5 76.2 50 : G=6 63.5, 76.2 : G=5 89 : G=4 Clamp Code : C 3600 3 A1 W1 F W B A 78.0 64.0 68.0 22.4 90.0 76.0 80.0 28.0 104.5 90.0 93.5 31.5 D 50 63.5 76.2 89 4.5 Code : LG K1 E1 Terminal E 32.5 38.1 44.5 50.8 K 37.0 43.5 50.0 56.5 F 22.4 28.0 31.5 31.5 J 14.0 14.0 14.0 16.0 <Screw specifcations> Plus hexagon-headed screw :M5x0.8x10 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RWG A A A L G N A A A M A A A M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 12,000F:123) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 350V:351, 400V:401) Series code Category Please refer to "Product code guide (screw-mount terminal type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (1/2) CAT. No. E1001M LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85 RWG Series STANDARD RATINGS WV (Vdc) Cap (F) Case size DxL(mm) Rated ripple current tan (Arms/85) WV (Vdc) Part No. Cap (F) Case size DxL(mm) tan 120Hz 300Hz 2,200 2,700 3,300 3,900 4,700 5,600 6,800 350 6,800 8,200 8,200 10,000 12,000 15,000 15,000 18,000 1,800 2,200 2,700 3,300 400 3,900 4,700 5,600 5,600 50x96 50x105 50x115 50x130 63.5x115 63.5x130 63.5x155 76.2x115 63.5x190 76.2x130 76.2x155 76.2x170 89x155 89x170 89x190 50x96 50x105 50x115 50x130 63.5x115 63.5x130 63.5x155 76.2x115 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 7.70 8.90 10.3 11.8 13.6 15.7 18.8 18.2 22.6 21.0 25.1 28.7 33.6 35.0 40.3 7.00 8.10 9.30 10.9 12.4 14.4 17.0 16.5 9.20 10.6 12.3 14.1 16.3 18.8 22.5 21.8 27.1 25.2 30.1 34.4 40.3 42.0 48.3 8.40 9.70 11.1 13.0 14.8 17.2 20.4 19.8 Rated ripple current (Arms/85) Part No. 120Hz 300Hz ERWG351LGC222MC96M ERWG351LGC272MCA5M ERWG351LGC332MCB5M ERWG351LGC392MCD0M ERWG351LGC472MDB5M ERWG351LGC562MDD0M ERWG351LGC682MDF5M ERWG351LGC682MEB5M ERWG351LGC822MDK0M ERWG351LGC822MED0M ERWG351LGC103MEF5M ERWG351LGC123MEH0M ERWG351LGC153MFF5M ERWG351LGC153MFH0M ERWG351LGC183MFK0M ERWG401LGC182MC96M ERWG401LGC222MCA5M ERWG401LGC272MCB5M ERWG401LGC332MCD0M ERWG401LGC392MDB5M ERWG401LGC472MDD0M ERWG401LGC562MDF5M ERWG401LGC562MEB5M 6,800 6,800 8,200 400 10,000 12,000 12,000 15,000 1,500 1,800 2,200 2,700 3,300 3,900 4,700 450 4,700 5,600 5,600 6,800 8,200 10,000 10,000 12,000 63.5x190 76.2x130 76.2x155 76.2x170 89x155 89x170 89x190 50x96 50x105 50x115 50x130 63.5x115 63.5x130 63.5x155 76.2x115 63.5x190 76.2x130 76.2x155 76.2x170 89x155 89x170 89x190 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 20.6 19.2 22.7 26.2 30.0 31.3 36.7 6.40 7.30 8.40 9.80 11.4 13.1 15.6 15.1 18.7 17.4 20.7 23.7 27.4 28.6 32.9 24.7 23.0 27.2 31.4 36.0 37.5 44.0 7.60 8.70 10.0 11.7 13.6 15.7 18.7 18.1 22.4 20.8 24.8 28.4 32.8 34.3 39.4 ERWG401LGC682MDK0M ERWG401LGC682MED0M ERWG401LGC822MEF5M ERWG401LGC103MEH0M ERWG401LGC123MFF5M ERWG401LGC123MFH0M ERWG401LGC153MFK0M ERWG451LGC152MC96M ERWG451LGC182MCA5M ERWG451LGC222MCB5M ERWG451LGC272MCD0M ERWG451LGC332MDB5M ERWG451LGC392MDD0M ERWG451LGC472MDF5M ERWG451LGC472MEB5M ERWG451LGC562MDK0M ERWG451LGC562MED0M ERWG451LGC682MEF5M ERWG451LGC822MEH0M ERWG451LGC103MFF5M ERWG451LGC103MFH0M ERWG451LGC123MFK0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Coefficient 50 0.8 120 1.0 300 1.2 1k 1.4 3k 1.5 Note : The endurancce of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 to 10 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Also, for the RWG series capacitors, using them at operating voltage less than their rated voltage can extend their lifetime. For details, please contact a representative of Nippon Chemi-Con. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. (2/2) CAT. No. E1001M