A Product Line of Diodes Incorporated ZMR Series FIXED 2.5, 3.3 AND 5 VOLT MINIATURE VOLTAGE REGULATORS Description Pin Assignments The ZMR series of three terminal fixed positive voltage regulators feature internal current limit and will shut down under thermal overload conditions making the devices difficult to destroy. SOT23 Package Suffix - F The circuit design offers an exceptionally low quiescent current, only 30A for the 2.5V device, ideal for low power applications. The initial devices in the series regulate to 2.5 or 5V with a drive capability up to 50mA. 3 IN 2 OUT GND 1 (Top View) The device is designed with space saving in mind and is available in the small outline SOT23 package. The ZMR250 has expanded its input voltage range to 22.5V and the ZMR500 has expanded its input voltage range to 25V; equaling that of the ZMR25H and ZMR50H respectively. TO92 Package Suffix - C The ZMR330 provides a 3.3V output over an input range of 5V to 24V. Features * * * * * * Small outline SOT23 package 2.5V, 3.3V and 5V output Output current up to 50mA Very low quiesent current (30A) Unconditionally stable Internal short circuit current limit (Underside View) Typical Application Circuit VIN Applications * * * * * * * Small outline SOT23 package 2.5V, 3.3V, 5V output Output current up to 50mA Very low quiescent current (30A) Unconditionally stable Internal short circuit current limit "Green" molding compound (No Br, Sb) VOUT Gnd ZMR Series Document number: DS32195 Rev. 10 - 2 1 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Absolute Maximum Ratings Parameter Input Voltage ZMR250 ZMR330 ZMR500 Power Dissipation (TAMB = 25C) (Note 3) SOT23 Output Current (IO) Ambient Temperature Maximum Junction Temperature Storage Temperature Notes: Rating 22.5 24 25 Unit V 500 100 -55 to 125 125 -65 to 150 mW mA C C C 1. The maximum operating input voltage and output current of the device will be governed by the maximum power dissipation of the selected package. Maximum package power dissipation is specified at 25C and must be linearly derated to zero at Tamb =125C. 2. The following data represents pulse test conditions with junction temperatures as indicated at the initiation of the test. Continuous operation of the devices with the stated conditions might exceed the power dissipation limits of the chosen package. 3. Maximum power dissipation for the SOT23 package, is calculated assuming that the device is mounted on a ceramic substrate measuring 15 x 15 x 0.6mm. Recommended Operating Conditions Input Voltage Range ZMR250 ZMR330 ZMR500 Min. 4.2 4.8 7.0 ZMR Series Document number: DS32195 Rev. 10 - 2 Max. 22.5 24 25 Unit V V V 2 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Electrical Characteristics (unless otherwise stated): TJ = 25C, IO = 10mA, VIN = 6.5V ZMR250 Symbol VO VO Parameter Output voltage Condition IO = 0 to 50mA TJ = -55 to 125C VIN = 4.5 to 22.5V IO = 0 to 50mA TJ = -55 to 125C Min. Typ. Max. Unit 2.438 2.5 2.563 V 2.360 2.640 V 2.630 2.640 V Line regulation VIN = 4.5 to 22.5V 5 15 mV VO Load regulation IO = 0 to 50mA IO = 0 to 10mA 20 12 30 mV lS Supply current TJ = -55 to 125C 30 40 A IO = 0 to 50mA VIN = 4.5 to 22.5V f = 10Hz to 10kHz 1 2 10 10 A lS Supply current change VN Output noise voltage VIN /_VO VIN VO /T Ripple rejection Input voltage required to maintain regulation Average temperature coefficient of VO ZMR Series Document number: DS32195 Rev. 10 - 2 VIN = 6.3 to 18V f = 120Hz IO = 5.0mA TJ = -55 to 125C 3 of 11 www.diodes.com 55 65 V rms 75 dB 3.9 V 0.275 0.700 mV/C May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Electrical Characteristics (unless otherwise stated): TJ = 25C, IO = 10mA, VIN = 7V ZMR330 Symbol VO Parameter Output voltage Condition IO = 0 to 50mA TJ = -55 to 125C VIN = 5 to 24V IO = 0 to 50mA TJ = -55 to 125C Min. Typ. Max. Unit 3.217 3.3 3.383 V 3.148 3.393 V 3.148 3.408 V VO Line regulation VIN = 5 to 24V 5 15 mV VO Load regulation IO = 0 to 50mA IO = 0 to 10mA 20 13 30 mV lS Supply current TJ = -55 to 125C 120 170 A IO = 0 to 50mA VIN = 5 to 20V f = 10Hz to 10kHz 5 2 10 10 A lS Supply current change VN Output noise voltage VIN /_VO VIN Ripple rejection VIN = 6 to 20V f = 120Hz Input voltage required to maintain regulation VOUT = 3.217V ZMR Series Document number: DS32195 Rev. 10 - 2 4 of 11 www.diodes.com 80 55 V rms dB 4.74 V May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Electrical Characteristics (unless otherwise stated): TJ = 25C, IO = 10mA, VIN = 10V ZMR500 Symbol VO VO Parameter Output voltage Condition IO = 0 to 50mA TJ = -55 to 125C VIN = 7 to 25V IO = 0 to 50mA TJ = -55 to 125C Min. Typ. Max. Unit 4.785 5 5.125 V 4.780 5.160 V 4.780 5.175 V Line regulation VIN = 7 to 25V 5 15 mV VO Load regulation IO = 0 to 50mA IO = 0 to 10mA 25 15 40 mV lS Supply current TJ = -55 to 125C 50 70 A IO = 0 to 50mA VIN = 7 to 25V f = 10Hz to 10kHz 1 2 10 10 A lS Supply current change VN Output noise voltage VIN /_VO VIN VO /T Ripple rejection Input voltage required to maintain regulation Average temperature coefficient of VO ZMR Series Document number: DS32195 Rev. 10 - 2 VIN = 8 to 18V f = 120Hz IO = 5.0mA TJ = -55 to 125C 5 of 11 www.diodes.com 55 90 V rms 72 dB 6.7 V 0.275 0.700 mV/C May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Typical Characteristics 5.02 60 Io=10mA Io=5mA Vin=Vo+4 ZMR500 5.00 Quiescent Current (A) Output Voltage 4.98 4.96 2.52 Io=5mA Vin=V o+4 2.50 ZMR500 50 2.48 2.46 40 ZMR250 30 20 10 ZMR250 -50 -25 0 25 50 0 75 100 125 2 4 Temperature ( C) 6 10 12 14 16 18 20 8 Input Voltage (V) Output Voltage Temperature Quiescent Current v Voltage 60 Io=0 Vin=V o+4 34 Io=0 Vin=V o+4 Quiescent Current (A) Quiescent Current (A) 56 32 30 ZMR250 28 52 48 ZMR500 44 26 40 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Temperature ( C) Temperature ( C) Quiescent Current v Temperature Quiescent Current v Temperature 2.5 Io=10mA 49 ZMR500 2.0 Io=0 Vin=V o+4 48 Drop-Out Voltage (V) Quiescent Current (A) 50 47 30 29 ZMR250 28 Io=0 Vin=V o+4 27 0.1 1 10 0.5 0 100 -50 -25 0 25 50 75 100 125 Temperature ( C) Quiescent Current v Output Current Document number: DS32195 Rev. 10 - 2 ZMR250 1.0 Output Current ZMR Series ZMR500 1.5 Drop-Out Voltage v Temperature 6 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Typical Characteristics (cont.) 90 I O= 10mA I o= 2mA VIN = VO U T+ 4V 80 Ripple Rejection (dB) Output Impedance ( ) 10 1.0 ZMR250 0.1 ZMR500 Io= 10mA 70 ZMR250 ZMR500 60 50 40 30 20 10 0 10 0.01 100 1K 100K 10K 100 1K 10K Ripple Rejection v Ripple Frequency Output Impedance v Frequency 10mA 5V Vin 0 0V 0.4 ZMR250 0 COUT=0 VIN=V o+4 dIo/dt=1A/s 0.4 -0.4 ZMR500 -0.4 40 20 0 80 60 100 Output Voltage Deviation (V) Output Voltage Deviation (V) Load Current 0 100K Ripple Frequency (Hz) Frequency (Hz) 0.4 ZMR250 0 COUT=0 VIN=V o+4 dVIN/dt=5V/s 0.4 -0.4 ZMR500 0 -0.4 0 Time (s) 10 20 30 40 50 Time (s) Line Transient Response Load Transient Response 2 Power Dissipation (mW) Surface Mount Devices 1 SOT23 0 -50 -25 0 25 50 75 100 125 Temperature (C) Power Derating ZMR Series Document number: DS32195 Rev. 10 - 2 7 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Ordering Information Reel Size (inches) Quantity per reel Tape Width (mm) 7" 3000 8mm replaced by ZMR500FTA 7" 3000 8mm Released Released Released Released 7" 7" 7" 7" 3000 3000 3000 3000 8mm 8mm 8mm 8mm Part Number Package Part Mark Status ZMR25HFTA SOT23 25X replaced by ZMR250FTA ZMR50HFTA SOT23 50R ZMR250FTA ZMR330FTA ZMR330F-7* ZMT500FTA SOT23 SOT23 SOT23 SOT23 25K 330 330 50K Obsolete Obsolete Notes: *ZMR330F-7 is in Halogen free molding compound All TO92 variants (ZMRxxxC) are obsolete. Closest replacements are the ZMRxxxFTA. ZMR Series Document number: DS32195 Rev. 10 - 2 8 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Package Outline Dimensions SOT23 E e e1 b 3 leads L1 D E1 A L A1 c Millimeters Inches Dim. Millimeters Inches Dim. Min. Max. Min. Max. A - 1.12 - 0.044 e1 A1 0.01 0.10 0.0004 0.004 E 2.10 2.64 0.083 0.104 b 0.30 0.50 0.012 0.020 E1 1.20 1.40 0.047 0.055 c 0.085 0.20 0.003 0.008 L 0.25 0.60 0.0098 0.0236 D 2.80 3.04 0.110 0.120 L1 0.45 0.62 0.018 0.024 - - - - - e 0.95 NOM 0.037 NOM Min. Max. 1.90 NOM Min. Max. 0.075 NOM Notes: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches ZMR Series Document number: DS32195 Rev. 10 - 2 9 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series Package Outline Dimensions (cont.) Millimeters O Dim. bs ol et e TO92 Inches Min. Max. Min. Max. 4.32 4.95 0.170 0.195 0.36 0.51 0.014 3.30 3.94 e 2.41 e1 L A b E Dim. Millimeters Inches Min. Max. Min. Max. R 2.16 2.41 0.085 0.095 0.020 S1 1.14 1.52 0.045 0.060 0.130 0.155 W 0.41 0.56 0.016 0.022 2.67 0.095 0.105 D 4.45 4.95 0.175 0.195 1.14 1.40 0.045 0.055 * 4 6 4 6 12.70 15.49 0.500 0.610 Notes: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches ZMR Series Document number: DS32195 Rev. 10 - 2 10 of 11 www.diodes.com May 2010 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZMR Series IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com ZMR Series Document number: DS32195 Rev. 10 - 2 11 of 11 www.diodes.com May 2010 (c) Diodes Incorporated