MMSZ5227B ... MMSZ5262B (500 mW) MMSZ5227B ... MMSZ5262B (500 mW) Surface mount Silicon Planar Zener Diodes Silizium-Planar-Zener-Dioden fur die Oberflachenmontage Version 2012-02-24 3.8 Type Code 0.12 500 mW Nominal Z-voltage Nominale Z-Spannung 3.6...51 V Plastic case Kunststoffgehause 0.2 1.60.1 0.60.1 1.10.1 2.70.1 Maximum power dissipation Maximale Verlustleistung Dimensions - Mae [mm] ~ SOD-123 Weight approx. Gewicht ca. 0.01 g Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Standard Zener voltage tolerance is graded to the international E 24 (~ 5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationalen Reihe E 24 (~ 5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte Ptot 500 mW 1) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+175C -50...+175C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 300 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 240 K/W Power dissipation Verlustleistung TA = 25C Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 1 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 1 MMSZ5227B ... MMSZ5262B (500 mW) Maximum ratings Type Typ Grenzwerte 1 Zener voltage ) Zener-Spannung 1) at IZT Dynamic resistance Diff. Widerstand ZZ [] (f = 1 kHz) Temp. Coeffic. of Z-voltage ...der Z-Spannung Reverse volt. Sperrspanng. IR = 100 nA Z-current 2) Z-Strom 2) TA = 25C Vznom [V] Vz [V] IZT [mA] at IZT at IZT = 250 A VZ [10-4 /C] VR [V] IZmax [mA] MMSZ5227B 3.6 3.4...3.8 20 < 24 < 1700 < -3 1 (< 15 A) 130 MMSZ5228B 3.9 3.7...4.1 20 < 23 < 1900 < -3 1 (< 10 A) 120 MMSZ5229B 4.3 4.1...4.5 20 < 22 < 2000 < -3 1 (< 5 A) 110 MMSZ5230B 4.7 4.4...5.0 20 < 19 < 1900 < -3 2 (< 5 A) 100 MMSZ5231B 5.1 4.8...5.4 20 < 17 < 1600 <0 2 (< 5 A) 93 MMSZ5232B 5.6 5.2...6.0 20 < 11 < 1600 < +3.8 3 (< 5 A) 83 MMSZ5234B 6.2 5.8...6.6 20 <7 < 1000 < +4.5 4 (< 5 A) 76 MMSZ5235B 6.8 6.4...7.2 20 <5 < 750 < +5 5 (< 3 A) 69 MMSZ5236B 7.5 7.0...7.9 20 <6 < 500 < +5.8 6 (< 3 A) 63 MMSZ5237B 8.2 7.7...8.7 20 <8 < 500 < +6.2 6.5 (< 3 A) 57 MMSZ5239B 9.1 8.5...9.6 20 < 10 < 600 < +6.8 7 (< 3 A) 52 MMSZ5240B 10 9.4...10.6 20 < 17 < 600 < +7.5 8 (< 3 A) 47 MMSZ5241B 11 10.4...11.6 20 < 22 < 600 < +7.6 8.4 (< 2 A) 43 MMSZ5242B 12 11.4...12.7 20 < 30 < 600 < +7.7 9.1 (< 1 A) 39 MMSZ5243B 13 12.4...14.1 9.5 < 13 < 600 < +7.9 9.9 (< 0.5 A) 35 MMSZ5245B 15 13.8...15.6 8.5 < 16 < 600 < +8.2 11 32 MMSZ5246B 16 15.3...17.1 7.8 < 17 < 600 < +8.3 12 29 MMSZ5248B 18 16.8...19.1 7.0 < 21 < 600 < +8.5 14 26 MMSZ5250B 20 18.8...21.2 6.2 < 25 < 600 < +8.6 15 24 MMSZ5251B 22 20.8...23.3 5.6 < 29 < 600 < +8.7 17 21 MMSZ5252B 24 22.8...25.6 5.2 < 33 < 600 < +8.8 18 20 MMSZ5254B 27 25.1...28.9 4.6 < 41 < 600 < +9 21 17 MMSZ5256B 30 28...32 4.2 < 49 < 600 < +9.1 23 16 MMSZ5257B 33 31...35 3.8 < 58 < 700 < +9.2 25 14 MMSZ5258B 36 34...38 3.4 < 70 < 700 < +9.3 27 13 MMSZ5259B 39 37...41 3.2 < 80 < 800 < +9.4 30 12 MMSZ5260B 43 40...46 3.0 < 93 < 900 < +9.5 33 11 MMSZ5261B 47 44...50 2.7 < 105 < 1000 < +9.5 36 10 MMSZ5262B 51 48...54 2.5 < 125 < 1100 < +9.6 39 9 1 2 2 Measured under thermal equilibrium and DC test conditions Gemessen im thermischen Gleichgewicht bei Belastung mit Gleichstrom Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG