Amphenol GT Series Reverse Bayonet Coupling Connectors (R) 12-024-8 Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments AMPHENOL CORPORATION Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Phone: 800-678-0141 or 607-563-5011 www.amphenol-industrial.com Amphenol Table of Contents Page No. Amphenol(R) GT Series Reversed Bayonet Coupling Connectors General Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 GT Series insert availability charts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4 GT Series insert alternate positioning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 GT Series contact arrangements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-28 GT Connector Classes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29 GT00A wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30 GT00AF/00F wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31 GT00CF/00CFZ wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32 GT00G wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33 GT00LCF/00LCFZ wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34 GT00R wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35 GT00RV wall mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36 GT01A inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 37 GT01AF/01F inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 38 GT01G inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39 GT01LCF/01LCFZ inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 40 GT01R inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 41 GT01RV inline receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 42 GT02R/02RFS box mount receptacle for front panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 43 GT020R/020RFSM box mount receptacle for front panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 44 GT030 square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 45 GT030A square flange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46 GT030AF/030F square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 47 GT030G square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48 GT030LCF/030LCFZ square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - 49 GT030R square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 50 GT030RV square flange receptacle for rear panel mounting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 51 GT06A straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 52 GT06AF/06F straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 53 GT06CF straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 54 GT06CFGG straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 55 GT06G straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 56 GT06G2 straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 57 GT06LC straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 58 GT06LCF/06LCFZ straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 59 GT06LT straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 60 GT06PFC straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 61 GT06PG straight plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 62 GT06PP/064PP panel plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 63 GT06R straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 64 GT06RV straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 65 GT06SB straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 66 GT06SBT straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 67 GT065SL straight plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 68 GT07R jam nut receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 69 GT070 jam nut receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 70 GT08A 90 angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 71 GT08AF/08F 90 angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 72 GT08CFGG 90 angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 73 GT08LT 90 angle plug- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 74 GT08PFC 90 angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 75 GT08R 90 angle plug - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 76 GT05 dummy receptacle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 77 GTTB thru-bulkhead receptacles - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 78 Sealing gaskets - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 79 Receptacle protection caps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 80 Plug protection caps - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 81 MS3057-A cable clamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 82 MS3420 bushing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 83 MS3057-C style (10-350349) cable clamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 84 Rear mounting data - receptacles, sealing plugs, sealing ranges - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 85 Crimp and solder contact information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 86, 87 HOW TO ORDER, connector intermateability - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 88 GT Amphe-Power Connectors with RADSOK(R) Technology, Amphe-PowerTM Amphe-GTR, Power GT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 89 Special Application GT Connectors: GTC-M Series with metal clips, GT-PC Connectors for high voltage power applications, GT Connectors for the HMI Lighting industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 90 Additional Amphenol Industrial Products for the Rail Industry - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 91, 92 Sales office listing Amphenol Aerospace operates quality systems that are certified to ISO9001: 2000 by third party registrars. Amphenol (R) GT Connectors with reverse bayonet coupling the preferred connector for mass transit Designed originally for use by the military, the heavy duty GT connector has become widely used in commercial, geophysical, aerospace, ground support and shipboard applications. It is the preferred connector for mass transit. Variety of Shell Styles are Available Amphenol(R) GT reverse bayonet coupling connectors with MIL-C-5015 insert patterns features: Wall Mount Receptacle * * * * * * * * Inline Receptacle * * * * * Straight Plug * * * * * Plug With Rubber Covered Coupling Nut Amphenol's special offerings of GT Series connectors (see end of catalog) include: GT Amphe-Power(R) Connectors with RADSOK(R) technology, the GTC-M Series with metal clip inserts and GT-PC Series for high voltage power applications. There is also information on other Amphenol Industrial Products for the Rail Industry at the end of this catalog. For further information on your individual application requirements, contact: Amphenol Corporation Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Phone: 607-563-5011 Fax: 607-563-5351 www.amphenol-industrial.com Jam Nut Receptacle NOTE: The connector products in this brochure were formerly known as Bendix(R) products. These products are now manufactured and sold under the Amphenol(R) brand name. The name "Amphenol" will replace the name "Bendix" on products and literature in the future. Quick positive coupling Audible, tactile and visual indication of full coupling Waterproof - IP67 rated No lockwiring required High shock and vibration capabilities Inserts available in Neoprene and Viton* materials Low smoke/flame retardant inserts also available Operating temperature range: With Neoprene inserts: -55C to +125C With Viton** inserts: -50C to +200C With low smoke/flame retardant inserts: -55C to +125C Available in both crimp and solder terminations Contacts available in gold and silver plating Numerous military and commercial finishes available Zinc alloy plating (cadmium free) available Rugged construction; aluminum or stainless steel components Available with resilient cover coupling for added damage protection and increased gripping surface Intermateable with existing VG95234 connectors 2000 couplings minimum UL recognized Up to 50% more ampacity with the use of RADSOK (R) technology (see page 89) 1 **For availability of Viton inserts consult Amphenol, Sidney, NY. Viton is a registered trademark of Dupont/Dow Corning. GT Series insert availability Insert Arrangement 10SL-3 10SL-4 Contact Size Insert Arrangement Service Rating 0 1 Service Rating A 3 3 20-2 D 1 Coax 0 4 8 12 16 0 4 8 12 Contact Size Total Contacts Total Contacts Coax 4 8 12 16 A 2 2 20-3 D 3 3 14S-2 Inst. 4 4 20-4 D 4 4 14S-4 D 1 1 20-6 D 3 14S-5 Inst. 5 5 20-7 D/A 8 14S-6 Inst. 6 6 20-8 Inst. 6 14S-7 A 3 3 20-9 D/A 8 14S-9 A 2 2 20-11 Inst. 13 14S-10 Inst. 4 4 20-12 A 2 14S-12 A 3 3 20-14 A 5 14S-A7 A 7 7 20-15 A 7 7 16S-1 A 7 7 20-16 A 9 2 7 16S-3 B 1 1 20-17 A 6 5 1 16S-4 D 2 2 20-18 A 9 3 6 16S-5 A 3 3 20-19 A 3 16S-6 A 3 3 20-20 A 4 16S-8 A 5 5 20-21 A 9 16-2 E 1 20-22 A 6 3 16-7 A 3 2 20-23 A 2 2 16-9 A 4 2 2 20-24 A 4 2 16-10 A 3 3 20-25 Inst. 13 13 16-11 A 2 2 20-26 A 19 19 16-12 A 1 20-27 A 14 14 16-13 A 2 2 20-29 A 17 17 16-59 A 4 4 20-30 Inst. 13 13 18-1 A/Inst. 10 20-33 A 11 11 18-3 D 2 18-4 D 4 18-5 D 3 18-6 D 1 18-7 B 1 18-8 A 8 1 7 18-9 Inst. 7 2 5 18-10 A 4 18-11 A 5 18-12 A 6 18-13 A 4 18-14 A 2 18-15 A 4 18-16 C 1 18-17 Inst. 7 2 18-19 A 18-20 A 1 1 1 10 2 4 1 1 2 3 3 1 3 1 2 3 A 7 1 20-58 A 10 20-59 A 3 20-66 A 20-79 A/D 22-1 D 2 4 22-2 D 3 3 5 22-4 A 4 2 22-5 D 6 22-6 D 3 22-7 E 1 4 22-8 E 2 2 1 22-9 E 3 3 5 22-10 E 4 10 10 22-11 B 2 5 5 22-12 D 5 1 3 1 1 8 3 A 6 7 13 1 20-57 1 3 7* 5 5 6 5* 1 8 1 7 18-22 D 3 3 22-13 D/A 5 18-24 A/Inst. 10 10 22-14 A 19 18-29 A 5 5 22-15 E/A 6 18-30 A 5 5 18-31 A 5 5 8 12 8 2 20-51 1 4 3 4 2 0 3* 2 2 2 2 4 1 1 4 2 2 3 4 1 19 5 1 10SL-4 arrangement available only with pin contacts in receptacle and socket contacts in plug **Coaxial cable data can be found on insert arrangement drawings, pages 6-28. For further information on coaxial contacts and cable see catalog 12-130. *Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 6-28 for application wire size. 2 GT Series insert availability, cont. Insert Arrange ment Service Rating Total Contacts 22-16 A 22-17 D/A 22-18 D/A 22-19 A 22-20 A 9 22-21 A 3 22-22 A 4 22-23 D/A 8 22-24 D/A 6 22-27 D/A 9 22-28 A 7 22-33 D/A 7 22-34 D 5 22-63 A 22-65 D/A 22-70 Contact Size Insert Arrange ment Contact Size Service Rating Total Contacts 24-84 A 19 8 24-96 Inst. 28 8 8 24-AJ A 25 14 14 28-1 D/A 9 9 28-2 D 14 2 28-3 E 3 28-4 E/D 9 28-5 D 5 2 4 28-6 D 3 3 8 28-7 D 2 2 28-8 E/D/A 7 28-9 3 2 12 4 8 8 8* A 13 8 22-80 A 3 24-2 D 7 7 24-3 D 7 2 24-5 A 16 24-6 D/A 8 8 24-7 A 16 2 24-9 A 2 24-10 A 7 7 24-11 A 9 3 24-12 A 5 24-16 D/A 7 24-17 D 5 24-19 A 12 24-20 D 11 24-21 D 10 1 24-22 D 4 4 Coax** 0 4 8 12 16 9 3 6 9 1 1 0 4 8 12 4 2 2 2 6 28-10 D/A 7 28-11 A 22 28-12 A 26 26 28-13 A 26 26 28-15 A 35 35 28-16 A 20 20 5 28-17 B/D/A 15 15 16 28-18 C/D/A/Inst. 12 12 28-19 B/D/A 10 4 6 28-20 A 14 10 4 28-21 A 37 28-22 D 6 28-51 A 12 28-59 A 17 3 28-66 A 16 2 4 37 3 7 2 10 14 Coax 3 A 16 7* 9 9 28-75 A 16 7* 9 9 28-79 A 16 7 28-82 D 6 2 7 28-84 A 9 24 28-AY A 9 24-51 A 5 E/D 5 24-52 Hi Volt. 1 32-2 E 5 24-53 A 5 5 32-3 D 9 24-58 A 13 3 14 24-59 A 14 24-60 A 7 24-65 A 15 5 32-1 1 3 7 32-4 A/D 7 7 32-5 D 2 32-6 A 23 32-7 Inst./A 35 7* 4 3 9 3 3 1 2 2 2 4 2 12 2 2 D 7 7 32-8 A 30 Inst. 19 19 32-9 D 14 2 24-71 A 7 7* 32-10 E/B/D/A 7 2 24-75 A 7 7* 32-12 A/D 15 5 32-13 D 23 32-15 D 8 32-16 A 23 *Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 6-28 for application wire size. 5 2 24-67 23 9 4 4 24-66 5 3 12 28-74 7 23 18 28-72 24 A 3 3 E Inst. 2 12 Inst. 24-80 12 3 10 24-28 24-79 6 2 24-27 11 25 3 6 3 8 12 18 12 14 4 28 D 5 0 1 12 6 2 16 7 2 3 12 2 3* 1 8 2 7 2 4 1 8 1 Coax** 0 3 2 16 7 28 6 24 12 2 2 3 5 10 5 18 6 2 3 2 16 **Coaxial cable data can be found on insert arrangement drawings, pages 6-28. For further information on coaxial contacts and cable see catalog 12-130. 3 GT Series insert availability, cont. Insert Arrangement Contact Size Service Rating Total Contacts 32-17 D 4 32-22 A 54 32-25 A 25 32-31 A 31 32-48 Inst. 48 32-52 D 8 32-53 E/Inst. 42 5 32-56 A 30 6* 32-57 Coax 8 6 32-58 Coax 4 32-59 A 42 Insert Arrangement 0 4 8 12 Service Rating 36-71 A 53 36-73 Coax 7 36-74 A 44 43 31 36-75 A 48 48* 48 36-76 A 47 36-77 D 7 37 36-78 A 14 24 36-79 A 20 20 36-80 A 20 20* 36-83 Coax 7 2 36-85 A/D 35 15 8 36-97 C 1 16 2 36-99 D 12 36-AF A 48 40-1 D 30 40-5 A 5 40-9 A 47 40-10 A 29 4 1 16 0 4 8 12 4 54 25 2 6 2 4 40 32-60 A 23 32-62 Coax 23 32-64 Inst. 54 54 32-68 A 16 12 32-73 A 46 46 32-75 Coax 9 2 32-76 A 19 19 32-79 D 5 4 32-82 A 16 4 32-AF A 55 32-AM A 1 36-1 D 22 36-3 D 6 3 36-4 D/A 3 3 36-5 A 4 4 36-6 A 6 2 36-7 A 47 36-8 A 47 36-9 A 31 36-10 A 36-11 A 36-12 A 36-13 E/A 17 36-14 D 16 36-15 D/A 35 36-16 A 47 36-17 A 47 36-18 A 31 36-20 A 34 36-22 D 22 36-51 D 4 36-52 A 52 36-54 A 39 8 36-55 A 39 8* 36-59 A 53 3* 36-60 A 47 7* 36-64 Coax 4 4 36-65 Coax 4 4 2 1 2 4 7 1 40-30 A 30 12 40-35 D 35 55 40-53 A 60 40-56 A 85 40-57 E 4 40-61 A 59 40-62 A 60 1 size 4/0 4 Contact Size Total Contacts Coax** 18 3 4 40-63 A 61 40-64 Coax 36 Coax** 0 4 8 12 16 3 50 12 2 7 35* 1 size 4/0 3 3 3 3 48 6 24 5 1 22 9 24 16 29 35 60 85 4 1 3 55 60 61* 3 20 Coax 4 1 46 40-67 A 11 14 14 40-68 A 21 48 48 40-70 A 61 48 48 40-72 A 11 1 48 48 40-73 A 61 61 1 2 2 2 15 40-74 A 6 5 6 40-75 E 5 35 40-80 A 11 7 40 40-81 A 62 2 1 61 1 4 4 10 1 40-82 A 62 62 40-85 A 60 60* 2 30 40-86 Coax 4 40-87 D 7 A 8 40-AG A 38 31 40-AP E 2 31 40-AR Inst. 13 50 40-AS A 40 40 40-AT A 43 40-AU A 14 40-AV D 3 *Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 6-28 for application wire size. 1 62* 14 40-AD 10 1 40 52 10 21 7 2 13 4 14 22 1 47 40-66 5 8 12 7 40 2 4 7 7 1 0 4 7 4 4 38 2 size 4/0 3 3 7 1 3 25 15 24 18 10 1 3 size 2/0 **Coaxial cable data can be found on insert arrangement drawings, pages 6-28. For further information on coaxial contacts and cable see catalog 12-130. 4 GT Series insert alternate positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: Degrees As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. B A A B B Position X Position Y X Y Z 80 110 250 280 16-7 20-16 22-18 24-4 24-28 28-16 32-10 18-5 20-20 22-19 24-5 24-AJ 28-17 32-12 18-9 20-22 22-21 24-6 28-1 28-19 32-13 18-13 22-3 22-24 24-7 28-4 28-20 32-22 18-14 22-6 22-25 24-12 28-8 28-21 32-AF 20-7 22-12 22-29 24-14 28-9 32-1 36-1 20-8 22-14 22-33 24-16 28-10 32-3 36-7 T B A A Position W W Position Z 20-9 22-15 22-34 24-17 28-11 32-4 36-8 20-12 22-16 24-1 24-20 28-14 32-6 36-13 20-14 22-17 24-3 24-21 28-15 32-9 40-53 View looking into front face of pin insert or rear of socket insert. Degrees Insert Arrangement W X Y Z 10SL-4 63 - - - 14S-2 - 120 240 14S-5 - 110 - 14S-7 90 180 14S-9 70 145 16-9 35 16-10 16-11 Insert Arrangement Degrees Insert Arrangement Degrees W X Y Z 28-7 35 110 250 325 325 28-12 90 180 270 - 325 28-18 70 145 215 290 250 325 28-22 70 145 215 290 250 325 28-AY 45 110 250 - - 280 32-2 70 145 215 290 - - 280 32-5 35 110 250 325 110 250 325 32-7 80 125 235 280 145 215 290 32-8 80 125 235 280 35 110 250 325 32-15 35 110 250 280 22-5 35 110 250 325 32-17 45 110 250 - 290 22-8 35 110 250 325 32-25 60 120 - - - 22-9 70 145 215 290 32-64* 80 100 110 250 265 - 22-10 35 110 250 325 32-68 30 - - - 215 290 22-11 35 110 250 325 32-82 30 - - - 110 250 325 22-13 35 110 250 325 36-3 70 145 215 290 35 110 250 325 22-20 35 110 250 325 36-4 70 145 215 290 70 - - 290 22-22 - 110 250 - 36-5 - 120 240 - - 120 240 - 22-23 35 - 250 - 36-6 35 110 250 325 18-11 - 170 265 - 22-27 80 - 250 280 36-9 80 125 235 280 18-12 80 - - 280 22-28 80 - - 280 36-10 80 125 235 280 18-15 - 120 240 - 24-2 80 - - 280 36-14 90 180 270 - 18-20 90 180 270 - 24-9 35 110 250 325 36-15 60 125 245 305 18-22 70 145 215 290 24-10 80 - - 280 36-AF 65 - - - 18-29 90 180 270 - 24-11 35 110 250 325 40-1 65 130 235 300 20-3 70 145 215 290 24-22 45 110 250 - 40-5 33 - - 270 20-4 45 110 250 - 24-27 80 - - 280 40-9 65 125 225 310 20-5 35 110 250 325 24-96 65 - - - 40-10 65 125 225 310 20-6 70 145 215 290 28-2 35 110 250 325 40-35 70 130 230 290 20-15 80 - - 280 28-3 70 145 215 290 40-56 72 144 216 288 20-17 90 180 270 - 28-5 35 110 250 325 40-AG 37 74 285 322 20-18 35 110 250 325 28-6 70 145 215 290 W X Y Z 20-19 90 180 270 - - 20-21 35 110 250 - 20-23 35 110 250 270 - 20-24 35 110 215 290 20-27 35 110 110 250 325 20-29 80 - 90 180 270 - 20-33 - 35 110 250 325 22-1 35 16-13 35 110 250 325 22-2 70 16S-1 80 - - 280 22-4 16S-4 35 110 250 325 16S-5 70 145 215 16S-6 90 180 270 16S-8 - 170 18-1 70 145 18-3 35 18-4 18-8 18-10 5 *Additional rotations available; consult Amphenol for information. GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated B A A C B D A C B A E B D C Insert Arrangement Front of Socket Insert Front of Socket Insert 10SL-3 10SL-4 14S-2 14S-4 14S-5 Service Rating A A Inst. D Inst. Number of Contacts 3 2 4 1 5 Contact Size 16 16 16 16 16 A F B B E Insert Arrangement 100 100 D A C B A C B C D A A C B 100 Rotation of 14S-2 100 Rotation of 14S-7 14S-6 14S-7 14S-9 14S-10 14S-12 A Service Rating Inst. A A Inst. Number of Contacts 6 3 2 4 3 Contact Size 16 16 16 16 16 F A B F E G B B C E D D Insert Arrangement A A G A C C B 14S-A7 16S-1 16S-3 16S-4 16S-5 Service Rating A A B D A Number of Contacts 7 7 1 2 3 Contact Size 16 16 16 16 16 E C A A A B A D D C B Insert Arrangement B B C C 16S-6 16S-8 16-2 16-7 Service Rating A A E A Number of Contacts 3 5 1 1 2 2 2 Contact Size 16 16 12 8 16 12 16 CONTACT LEGEND 16 6 16-9 A 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated C A A B A B A B C D B Insert Arrangement 16-10 16-11 16-12 16-13 16-59 Service Rating A A A A A Number of Contacts 3 2 1 2* 4 Contact Size 12 12 4 12 12 H A G B I J F B C E Insert Arrangement Service Rating A D A C B A C B D 18-1 18-3 18-4 18-5 18-6 18-7 D B, C, F, G = A; Bal. = Inst. D D D B Number of Contacts 10 2 4 2 1 1 1 Contact Size 16 12 16 12 16 4 8 G F F A H E Insert Arrangement D A C B B F D A D E A D B G B A C D C D E C E A C B B C 18-8 18-9 18-10 18-11 18-12 A Inst. A A A Service Rating 18-13 A Number of Contacts 1 7 2 5 4 5 6 1 3 Contact Size 12 16 12 16 12 12 16 8 12 100 A B D A A F E B B C D B E F A C G B G H C D E J A C D K 100 Rotation of 18-9 Insert Arrangement 18-14 18-15 18-16 18-17 18-19 18-20 A A C Inst. A A Service Rating Number of Contacts 1 1 4** 1 2 5 10 5 Contact Size 4 16 12 12 12 16 16 16 CONTACT LEGEND * A = Iron; B = Constantan **A, C = Iron; B, D = Constantan 7 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated H G A E G A 250 B J F 110 A A C E A B C D B E C D E D 250 Rotation of 18-1 Insert Arrangement B B I C D 260 110 Rotation of 18-20 260 Rotation of 18-20 18-22 18-24 18-29 18-30 18-31 20-2 Service Rating D B, C, F, G = A; Bal. = Inst. A A A D Number of Contacts 3 10 5 5 5 1 Contact Size 16 16 16 16 16 0 A A D A A C G E B A B F G H C B C Insert Arrangement C B F F B B H C C D E A E D D 20-3 20-4 20-6 20-7 Service Rating D D D A, B, H, G = D; C, D, E, F = A Number of Contacts 3 4 3 8 2 4 1 7 Contact Size 12 12 16 16 8 16 12 16 L 20-9 Inst. H = D; Bal. = A F E A F G D E A E G B D E G C M N F E A B 20-8 D H I A F D H A K B B D J C C C B A C B Insert Arrangement 20-11 20-12 20-14 20-15 20-16 Service Rating Inst. A A A A 20-17 A Number of Contacts 13 1 1 2 3 7 2 7 5 1 Contact Size 16 4 16 8 12 12 12 16 12 16 CONTACT LEGEND 8 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A H G A A F E C C F B A B G C C E A D B D E 20-19 A A 20-20 B C B 20-18 Service Rating F H A I D Insert Arrangement D B I 20-21 A 20-22 20-23 A A A Number of Contacts 3 6 3 1 3 1 8 3 3 2 Contact Size 12 16 8 4 12 12 16 8 16 8 100 A M L B F M D N B E G A D C H V J K P T H J N U K J A L C S A A I M B L K H N D R G B C G L T R J E B 20-24 20-25 A Service Rating H A D 250 100 Rotation of 20-11 Insert Arrangement F E G N E G C M D F H F L C P S K D M F E C B N 250 Rotation of 20-11 20-26 20-27 20-29 20-30 Inst. Inst. A A A Number of Contacts 2 2 13 19 14 17 13 Contact Size 8 16 16 16 16 16 16 J A K B J A G E A C A D A B F L L D D F E K H D E C H Insert Arrangement F A C M K J C C C B B E B B F 20-33 20-51 20-57 20-58 20-59 Service Rating A A A A A Number of Contacts 11 3* 7* 5 5 3* 1 5 Contact Size 16 8 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire 16 12 for #10 wire CONTACT LEGEND * Solderless 9 16 20-66 A 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A A G A F B H F B C B Insert Arrangement D A D E Service Rating A E C B B 20-79 22-1 22-2 H=D; Bal. = A C D 22-4 C 22-5 D D Number of Contacts 7* 1* 2 3 2 A 2 2 D 4 Contact Size 16 12 for #16 wire 8 8 8 12 12 16 A A B B C B C Insert Arrangement D A C B A 22-6 22-7 22-8 22-9 22-10 D E Service Rating E E E Number of Contacts 2 1 1 2 3 4 Contact Size 8 16 0 12 12 16 L A E B B D A J E C D Insert Arrangement Service Rating K A B M U T H V S B P R F B C D E G C A A N C E D F 22-11 22-12 22-13 22-14 22-15 B D E = D; A, B, C, D = A A D = E; A, B, C, E, F = A Number of Contacts 2 2 3 4 1 19 5 1 Contact Size 16 8 16 12 16 16 12 16 CONTACT LEGEND * Solderless 10 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A A G F G A H B G F C J C F H M H C 22-17 22-18 A A = D; Bal. = A C G G H A F J B E D C D N D E 22-16 Service Rating L P J B E D D B K J E Insert Arrangement A B H E F 22-19 22-20 A A, B, F, G, H = D; C, D, E = A A Number of Contacts 3 6 1 8 8 14 9 Contact Size 12 16 12 16 16 16 16 A G A D C A F A H A H F B B J G B E C C E B C B F D C D D Insert Arrangement E 22-21 22-22 22-23 22-24 22-27 A A H = D; Bal. = A C, D, E = D; A, B, F = A J = D; Bal. = A Service Rating Number of Contacts 1 2 4 8 2 4 1 8 Contact Size 0 16 8 12 12 16 8 16 F D A A A B C E G C H G E D E M N F E K J C F D H Insert Arrangement Service Rating B D B E A F L A C D G C B B 22-28 22-33 22-34 22-63 22-65 A A, B, C, D = D; E. F. G = A D A H = D; Bal. = A Number of Contacts 7 7 3 2 4 8 8* Contact Size 12 16 12 16 12 16 12 for #14 or 16 wire CONTACT LEGEND * Solderless 11 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated J A A F K H F M B E B C B C D D E G J N P C H K M L D B C D F C N E A A G G E L P F A B R S Insert Arrangement 22-70 22-80 24-2 24-3 A A D D Service Rating 24-5 A Number of Contacts 8 5 3* 7 2 5 16 Contact Size 12 16 8 for #10 or 12 wire 12 12 16 16 A G K B H C Service Rating A B C A G E B D E F D I O E H D Insert Arrangement B N J E F C M P A B L A F G D F G C I H 24-6 24-7 24-9 24-10 A, G, H = D; Bal. = A A A A 24-11 A Number of Contacts 8 2 14 2 7 3 6 Contact Size 12 12 16 4 8 8 12 A F A E C B E H K B C C L G C K B C A D D D J H F 24-12 24-16 24-17 24-19 A A, B, F, G = D; C, D, E = A D A Service Rating A J B M E L D Insert Arrangement A N D B G F E E 24-20 D Number of Contacts 2 3 1 3 3 2 3 12 2 Contact Size 4 12 8 12 16 12 16 16 12 16 CONTACT LEGEND * Solderless 12 16 12 8 4 9 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A H B D A A A F G J E B C K K G F D C D S H N J E P T Q A D V U B C B D E Insert Arrangement C G M R E B F L W X Y Z C 24-21 24-22 24-27 24-28 D D E Inst. A 5* Service Rating Number of Contacts 1 9 4 7 24 Contact Size 8 16 8 16 16 H P E D J N K K F B B, E for AN #10 or 12 wire A, C, D for AN #8 wire P J N A 24-51 D M R M H F L A A G E B L F B E E A C C D C B C D Insert Arrangement 24-52 24-53 24-58 24-59 Service Rating Hi-Volt A A A Number of Contacts 1 5* 3 3 7 7 7 7* Contact Size 12 8 8 12 16 12 16 8 for #10 or 12 wire L B N S G E B G H C P F N T U A G E C B B D C D C L 24-65 24-66 24-67 24-71 A D Inst. A Service Rating A G E M K E F B A C D Insert Arrangement V J D F P S A 90 R H R D F A F M J E A K 24-60 24-75 A Number of Contacts 11 4 7 19 2* 5* 5 2 Contact Size 12 16 12 12 8 8 for #10 or 12 wire 8 8 for #16 wire CONTACT LEGEND * Solderless 13 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A B E C D D F 90 E F G H J A D G K B R L M S N T P Q H U 14 P S V N T U J V Insert Arrangement W X B 12 M Z E K 4 C G F M L D J H N Q P T 26 21 9 8 5 19 20 10 L 3 25 18 B A 2 17 28 22 27 11 1 24 23 13 C A K C 16 15 R E R 6 S W V U X Z Y a 7 24-79 24-80 24-84 24-96 Service Rating A Inst. A Inst. 24-AJ A Number of Contacts 5 23 1 18 28 25 Contact Size 8 16 12 12 (Coax) RG-188/U 16 16 or RG-174/U H A K B A J G J C L P H A S A M C P C G G F Insert Arrangement Service Rating 28-1 D N F D E B B C D E F B E 28-2 28-3 28-4 D E G, P, S = E; Bal. = D A, J, E = D; Bal. = A Number of Contacts 3 6 2 12 3 2 7 Contact Size 8 12 12 16 8 12 16 H A A A E G B B A J M B F K L D C C E B C D Insert Arrangement Service Rating 28-5 28-6 28-7 28-8 D D D L, M = E; B = D; Bal. = A Number of Contacts 2 1 2 3 2 2 10 Contact Size 4 12 16 4 4 12 16 CONTACT LEGEND 14 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated J H F A K G A B M L P U G E F J N V B R W C K L S N G B H C M Insert Arrangement D D d Y 28-10 28-11 D G = D; Bal. = A A 28-12 A 6 2 2 3 4 18 26 Contact Size 12 16 4 8 12 12 16 16 R A S a N H b Z M B T C U P D d Y V J X Z Y S H h f j G B B L M C U V R Q D J H K E L A G F N P R D M P k G m l H T A W g e F J c b a C K N V U T S d W X R E L K A B C D E F G J K L M F H 6 P E G J Number of Contacts 100 V W X K I 28-9 Service Rating C U L D T C B T b Z M D A S a A X E R P E F F N E 100 Rotation of 32-6 Insert Arrangement 28-13 28-15 28-16 28-17 Service Rating A A A R = B; M, N, P = D; A to L = A Number of Contacts 26 35 20 15 Contact Size 16 16 16 16 A L A B B C N K M K C E C D H G J F L M G E Service Rating K P H M J Insert Arrangement A J B L D G H F 28-18 28-19 M = C; G, H, J, K,L = D; A, B = A; Bal. = Inst. H, M = B; A, B, = D; Bal. = A E 28-20 A Number of Contacts 12 4 6 10 4 Contact Size 16 12 16 12 16 CONTACT LEGEND * Solderless 15 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated B C A D E K S G F M L T U N c h g n k Insert Arrangement r B P K N B R A L f M L A H Z X e j J A F R P d p C J W V b a H N S T B m E F D C E s E H F D J K 28-21 28-22 28-51 A D A Number of Contacts 37 3 3 12 7 10 Contact Size 16 4 16 12 12 16 R N B C D K E J D A F T C S J B H H K Insert Arrangement B R P L C K E L M T B R P L M A N A M T A D 28-59 A N C S D M Service Rating P U C S E H F F J 28-66 28-72 28-74 A - A Service Rating 28-75 A Number of Contacts 2 14 3 9* 4* 3* 9* Contact Size 8 12 4 (Coax) RG-59A/U or RG-62A/U 16 8 8 for #10 wire (S, T, R) 16 A N M T 8 for #10 wire B B R P 7* 1 L H 2 3 A C A C D K 4 S J G F D B C I 5 E H G E H F F E J D 6 Insert Arrangement 28-79 28-82 28-84 A D A Service Rating 28-AY A Number of Contacts 7 9 2 4 9 4 5 Contact Size 8 16 8 12 8 4 16 CONTACT LEGEND * Solderless 16 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated B A C E E F A A D E K A G F L B B O C B H G D D J M D C H C E N J Insert Arrangement Service Rating 32-1 32-2 32-3 32-4 A = E; B, C, D, E = D E D F, J, K, N = A:, Bal. = D Number of Contacts 2 3 3 2 1 2 2 4 2 12 Contact Size 0 12 4 16 0 4 12 16 12 16 A A B G H L M P C c F J I K P N R h A G B C H N U D I b X B Insert Arrangement T a g V L M f k U S Z S T K F Y e j O E R X d W J W D E V O 32-5 32-6 32-7 Service Rating D A A, B, h, j = Inst.; Bal. = A Number of Contacts 2 2 3 2 Contact Size 0 4 8 12 16 16 7 28 12 16 M T H U I e J V a P W R E C C G S A B B F K b X Insert Arrangement A A E O Z d F D N Y c D H E F I J G B G D K C L L M N 32-8 32-9 32-10 A D A, F = E; G = B; B, E = D; C, D = A Service Rating Number of Contacts 6 24 2 12 2 2 3 Contact Size 12 16 4 16 4 8 16 CONTACT LEGEND 17 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A N B A M C E D H F G J X L K R 100 B C Y S D D M P M F N R S T F H U F P L J I E U H O H O T N D G E Z V J L B C E C K W K A A B P V X W G G 100 Rotation of 32-6 Insert Arrangement Service Rating 32-12 32-13 32-15 C, D, E, F, G = A; Bal. = D D D 32-16 A Number of Contacts 5 10 5 18 2 6 2 3 2 16 Contact Size 12 16 12 16 0 12 4 8 12 16 A B D C A N P T X a e d h g w AB x 26 15 13 AC 8 AG 23 11 5 9 10 22 8 7 32-22 32-25 D A A A Number of Contacts 4 54 25 31 Contact Size 4 16 12 16 R Y L K J S h T b r w V A P c x m k s d B y BB f C z g D v F W H AA Y j X F A b Z J E p n u t M P T R a K X W N M 32-31 L H N M U j i q F H a Z 90 B S c m q r g p s B a C u t v e w CC P B F W K R C G b L S X G A E J V d E D I O Z V D U c U f n H N Y T d k i h 6 9 32-17 E 20 21 Service Rating A C D 5 31 29 6 7 4 19 28 30 24 4 18 20 27 25 12 AE 3 17 18 16 17 10 AA AF 3 14 22 21 2 15 24 25 19 r v y z AD Insert Arrangement k q u t B f j p n 16 14 23 W V Z Y s 1 1 2 11 R U c b 13 12 J M L O S C H K m E G F D 90 CW Rotation of 32-15 Insert Arrangement 32-48 32-52 32-53 Service Rating Inst. D t, u = E; Bal. = Inst. 32-56 A Number of Contacts 48 2 6 5 37 24 6 Contact Size 16 0 12 12 16 16 12 for #10 wire CONTACT LEGEND 18 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated Y A A D E A C F T w i h R P Insert Arrangement 32-58 32-59 ** - A Number of Contacts 6 2 Contact Size 12 0 (Coax) RG-71/U A B G H P 16 8 (Coax) RG-161/U 16 8 (Coax) RG-124/U B D N S X b c T n m s V W AB X P U Z j p x 32-64 Inst. 2 1 2 16 Contact Size 4 8 12 16 17 16 15 32 14 Insert Arrangement P R Q 32-68 A 16 4 (Coax) RG-58C/U 1 1 2 38 46 42 2 3 D A 3 23 24 26 40 27 41 28 29 10 4 9 5 25 39 1 8 4 45 11 J N AC 16 44 12 M 8 (Coax) RG-124/U 43 30 L 4 37 31 r K 12 22 35 13 E H 54 36 34 33 G 2 21 20 19 18 F AG ** Number of Contacts C f AE 32-62 Service Rating D v AA AF Insert Arrangement q y AD W k u t z a e d w R V Y h B M O g A J H L T S E G K N U A 4 (Coax) RG-161/U or RG-179/U C R 32-60 8 F O L 15 F M C M 2 J L D J K L 40 D I g K W 4 A C K M 32-57 Service Rating E N B V X N H U Y E d f J T a F G Z E U j S A S P c t H F D b s v k T B C a m U H Z n V D q p C R B X W B 8 6 5 9 7 10 11 12 E 6 7 6 2 7 13 8 9 14 15 3 5 17 4 18 16 C 19 B 32-73 32-75 32-76 Service Rating A 8, 9 = D A Number of Contacts 46 2 7 19 4 1 Contact Size 16 12 8 (Coax) RG-180B/U 12 4 8 CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 19 32-79 D 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A A B C B D F K N D C S E G H K L s R e x I f J K L M N v y O AA AD P R S T U V W AC AH AE AG 32-AF 32-AM A A A 36-1 D Number of Contacts 4 12 55 1 4 18 Contact Size 4 16 16 4/0 12 16 A A A F H r 32-82 Service Rating G k u t AF Insert Arrangement C W q z AB F a j p w P Q d D R V Z h n m J N P U Y g M B E J M O c b F H L T X A E G D E B B C B C D C Insert Arrangement 36-3 36-4 36-5 D A = D; B, C = A A Service Rating Number of Contacts 3 3 3 4 Contact Size 0 12 0 0 A A B D C B H O E C L P U Z h d j e f t J M T Y X m K g n s H L P U k h p t u R V a Z d c e j r w v s x y D y z z 36-6 36-7 A A Service Rating p w F O b f m v x W g k I S c b u N T X a r Insert Arrangement N S W C E D G M R V n B J I K Y A E G F F 36-8 A Number of Contacts 2 4 7 40 1 46 Contact Size 0 4 12 16 12 16 CONTACT LEGEND . 20 16 12 8 4 0 4/0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated S Z a A M U I O C H O H Y f b W d C L Q 100 G M G R X C B D H N S Y Z f m L T K e F R X J P V B K W c F A P e E F E G D E J V d A B D a g q u y N j r k K P V c f m Z z s w v y c k j r q u U b h p t N T a g n x S Y e M R X d L Q W s w v O U b h p n t T J x z 100 Rotation of 36-10 Insert Arrangement 36-9 Service Rating 36-10 A 36-11 A A Number of Contacts 1 2 14 14 48 48 Contact Size 4 8 12 16 16 16 A C H A B D E J F K L M P 110 G N M N B J L I O P Q R S T U R K V W d X Y e Z f m g n t a q p u v j r J k s w y P Q B Q H x G F N H L C D M G D E C K A c b h S E z F 110 Rotation of 36-10 Insert Arrangement 36-12 36-13 Service Rating A N, P, Q = E; Bal. = A Number of Contacts 48 2 15 5 5 Contact Size 16 12 16 8 12 16 S d U C c k j N V e m f b E W h Z L R Z h j n X Y F M O G Service Rating P Z j n e W y 36-15 36-16 M = D; Bal. = A A g k m p v w s y x z 110 Rotation of 36-7 36-17 A Number of Contacts 35 7 40 7 40 Contact Size 16 12 16 12 16 CONTACT LEGEND 21 c f t u T X b a z J 110 N S R V U r 100 Rotation of 36-7 Insert Arrangement M L h p m v J I d s H K Y g k r x K T c f w E G H X b t u N S a e B D C W V d g a M P 6 F J L U Y E G I K D A D F H O P C 100 B T D B A A R Q 36-14 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated S 100 M U Z a A I O C D E J V H A 14 B D E J F K L M 12 N S Y U V 3 W b a Z h 22 f 4 11 c j 16 g 19 k 5 17 10 G T T e d F L X c X C R b R B K W 15 20 P H Y f 2 21 P d e 1 13 G 18 m 6 9 N 8 7 100 Rotation of 36-9 Insert Arrangement 36-18 36-20 A A Service Rating 36-22 D Number of Contacts 1 2 14 14 2 2 30 22 Contact Size 4 8 12 16 8 12 16 12 A B A E L T C D M U N R W X c b j D k m S C X Z Y v AA V r x w j q 36-52 A p S L R P M N 36-54 A Number of Contacts 2 2 52 8 31 Contact Size 0 4 16 8 16 b a A c Y F n q g i T N V W X d f u J n P P R v g w A T U Z a b x y AE AC i r q AD j s z AA H O L P U k Y Z t AB h d j X a e c b f g m k t u p v r s w x y z 36-55 36-59 36-60 A A Service Rating T S W AJ N N M R V n AH J I K AF M E G F S h B D C K J Y p L R Insert Arrangement M m K h S L c H f p C D H F E d t r j D m s k W U E C X V A B B Z J K h AF D H f g T AC F n i U E d t r i D m s k AH AE 36-51 Service Rating h q AB AD B Insert Arrangement p u z y g n t s C f d B c Y W a A Z K J P V b a H F A Number of Contacts 31 8 50 3 40 7 Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire CONTACT LEGEND 22 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A B A C D A E D B D B L M N V W X c d v Y p T Z a z y k s t AB AA AE AH AD C b j r x U i q w S h AC C R g n K J P f m u H F AF AJ Insert Arrangement 36-64 36-65 Service Rating - - Number of Contacts 4 4 3 50 0 (Coax) RG-11/U 0 (Coax) RG-59/U, RG-62/U 12 16 RG-12/U, or RG-13/U or RG-71/U Contact Size 36-71 A 1 A 48 F 50 B 51 53 55 58 62 63 71 C 80 29 57 64 72 65 73 74 27 82 26 3 48 24 83 34 36 47 85 86 33 30 25 75 79 84 4 5 35 41 46 23 22 37 45 7 38 40 42 21 6 9 39 8 10 43 13 44 15 20 18 11 12 14 16 87 91 19 88 D 66 70 78 81 28 61 69 77 2 32 52 60 68 76 G 31 54 56 59 67 E 49 17 89 90 Insert Arrangement 36-73 36-74 Service Rating - A Number of Contacts 7 43 1 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/B Contact Size 1 6 9 13 2 11 15 20 24 36 38 41 2 11 8 14 3 12 26 30 34 37 9 21 29 33 40 1 17 25 28 32 B 12 16 19 23 27 31 10 A F 8 10 18 22 16 for #14 wire 5 7 14 A 48 3 4 36-75 E C 35 13 G 7 39 4 42 43 44 45 46 Insert Arrangement 47 D 6 5 36-76 36-77 Service Rating A D Number of Contacts 47 7 2 12 Contact Size 16 4 16 8 CONTACT LEGEND 23 36-78 A 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated 1 1 A 2 3 4 5 2 3 4 5 F 6 7 8 11 12 13 9 10 6 7 8 14 15 11 12 13 9 10 14 15 B E C G 16 17 18 19 16 17 18 19 D Insert Arrangement 20 20 36-79 36-80 36-83 Service Rating A A - Number of Contacts 20 20 7 Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U 1 S R Q A B T d U c P 3 W M h g Z Y a H J Insert Arrangement 5 36-97 M = D; Bal. = A C 35 1 3 3 3 3 16 for #12 wire 4/0 4 8 12 16 A d z y Q g X M u W L Z b a U C B A C D T E E F I J G K M N O P L R S N j T k F G H H h S V J s m U Y V W q p Z a c d B X b C n r Insert Arrangement c K t D B R Y N D f A O w 36-99 e P x v 6 36-85 Number of Contacts Contact Size 11 4 G K Service Rating 7 E F X L 12 D f m j 9 10 V N b 8 2 C e k G e 36-AF 40-1 40-5 Service Rating A D A Number of Contacts 48 6 24 5 Contact Size 16 12 16 0 CONTACT LEGEND 24 16 12 8 4 0 4/0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated A F D G M U H N O V W E B L C I J K P Q R S Y Z F E D J H K G d c e g f 4 21 29 T 16 5 30 L 28 a h 3 20 17 I X 2 18 A N b 1 19 B C Q M i 22 15 P 6 27 O 23 14 m l j R n r S o k p q t u Insert Arrangement 12 9 a 40-9 40-10 A A Service Rating 8 25 b Z 24 26 13 X W c Y s 7 U T V 11 10 40-30 A Number of Contacts 1 22 24 4 9 16 29 1 Contact Size 8 12 16 4 8 16 12 4 16 1 17 28 13 18 4 19 33 26 32 6 22 23 AC 17 37 50 34 13 v AE AR AZ AH AF AT BB BK BC BL BS 10 AJ BT BU 40-53 D A A Number of Contacts 35 60 85 Contact Size 12 16 16 1 8 16 9 17 25 33 18 26 34 42 4 2 50 10 27 43 51 11 19 35 20 44 23 13 29 45 24 7 21 37 14 30 46 23 31 39 47 22 21 24 20 19 55 18 57 55 45 56 59 6 29 57 50 36 48 49 35 15 8 31 32 33 34 14 7 30 47 58 58 9 10 11 12 13 40-57 40-61 Service Rating E A Number of Contacts 4 1 3 55 60 Contact Size 0 8 12 16 16 40-62 A CONTACT LEGEND 25 5 28 46 51 16 59 44 60 37 56 4 27 52 38 49 3 26 43 54 39 41 2 42 53 17 Insert Arrangement BH BR BV 25 41 40 32 40 48 54 53 15 22 38 3 BF BP AN AY 1 6 12 28 36 52 5 AM AX 40-56 2 4 BE s AB 11 12 40-35 3 AL AW BN r AA AK BD BM Service Rating 1 z AV g q y AU f p x W d n w AS BA BJ 9 33 35 14 32 AD AP 8 31 48 49 36 16 7 7 30 47 58 u V c m M U b k L T a j t 6 59 51 i K S Z D J R Y h 46 57 38 15 Insert Arrangement 5 C H P X 28 45 55 60 8 9 44 B F N 4 27 56 18 21 24 E 3 29 52 5 31 11 10 53 19 20 25 43 54 40 20 2 26 39 30 35 41 3 A 1 25 42 21 29 27 12 22 2 14 34 24 23 15 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated 42 21 41 19 39 44 18 28 47 17 16 48 13 Insert Arrangement V k 3 F H 40-63 40-64 Service Rating A - Number of Contacts 61 3 20 13 16 for #14 wire 12 16 8 (Coax) RG-124/U Contact Size 2 E Z Y J 11 4 X a 10 12 D W b K 9 34 14 m 8 33 35 15 c 32 49 C U j n q 7 31 58 50 36 T i p d L 30 S g f 6 46 57 51 37 M 5 29 61 59 1 B R h 45 56 52 38 4 27 60 A N 3 26 55 53 P 2 25 43 54 40 20 1 24 23 22 A 40-66 - 4 A N B 0 (Coax) RG-63 B/U 1 P M B W F V K H 11 C X E D 19 D S 36 E T U 12 20 28 J J 3 6 R L C 2 37 45 13 21 29 F M 39 Insert Arrangement Service Rating 15 54 32 40-68 A A A 1 10 21 61 Contact Size 16 4 (Coax) RG-59/U 8 16 A 22 42 21 41 54 40 44 52 57 61 E 19 J 18 H 44 28 56 29 30 47 51 16 M 9 33 34 13 3 8 32 35 14 4 48 49 15 L 7 31 58 36 5 6 46 57 50 2 5 45 59 37 6 4 27 43 61 52 17 K 3 26 60 39 38 Service Rating 43 51 1 2 25 55 53 D 1 24 23 B 20 Insert Arrangement 42 27 35 40-70 Number of Contacts F 34 50 18 26 G 40-67 C 33 56 60 17 25 41 49 55 59 10 16 24 40 48 58 9 23 31 47 53 H L K 14 30 5 8 22 38 46 4 7 10 12 40-72 40-73 A A 11 40-74 A Number of Contacts 1 10 61 1 1 4 Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U or RG-214/U CONTACT LEGEND 26 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated 1 A 1 B 5 2 6 3 7 8 4 9 10 11 5 12 4 20 2 C E D F H 13 21 29 37 J 14 22 30 38 46 15 23 31 39 47 40 25 41 55 17 33 49 59 3 24 32 48 54 16 26 34 42 50 56 60 18 35 43 51 57 61 19 27 28 36 44 52 45 53 58 62 L K M Insert Arrangement 40-75 40-80 E A Service Rating 40-81 A Number of Contacts 4 1 10 1 62 Contact Size 0 12 4 16 16 for #14 wire 1 5 12 20 6 13 21 29 2 14 22 30 3 7 8 15 23 31 4 9 16 24 32 17 25 33 18 26 34 22 11 35 41 21 19 27 38 39 40 41 42 43 53 47 48 54 49 55 59 50 56 60 51 57 61 52 28 45 60 6 46 45 57 38 51 17 37 50 32 33 35 15 34 13 4 2 8 31 48 49 36 16 62 58 7 30 47 59 53 58 5 29 14 Insert Arrangement 4 27 44 55 56 19 18 46 1 3 39 36 44 2 26 43 54 40 20 28 1 25 42 52 37 24 23 10 9 10 3 11 12 40-82 40-85 Service Rating A A 40-86 - Number of Contacts 62 60 4 Contact Size 16 16 for #14 wire 0 (Coax) RG-115A/U 1 37 B H 20 38 A 6 21 8 19 36 9 22 10 18 G 5 7 7 35 C 2 2 6 23 3 1 34 11 24 17 5 E 33 D F 16 32 4 4 3 14 27 29 40-87 40-AD Service Rating D A Number of Contacts 7 4 4 38 Contact Size 4 0 8 12 28 40-AG A CONTACT LEGEND 27 26 13 31 30 Insert Arrangement 25 12 15 16 12 8 4 0 GT Series contact arrangements front face of pin insert or rear face of socket insert illustrated B N C 31 M A D B 2 27 A L 36 9 7 18 28 35 8 19 29 33 34 32 30 38 39 1 11 3 26 E 37 10 40 6 17 12 25 H K 5 16 4 24 15 J Insert Arrangement 40-AS Inst. A 2 3 3 7 25 15 4/0 0 4 12 12 16 17 1 16 34 23 13 E 2 25 14 P 18 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 F 19 N 22 A 4 20 D 5 C Insert Arrangement Service Rating 9 H 6 21 C 7 10 B G 39 43 11 A B 3 M 12 22 40-AR Contact Size 24 13 21 14 23 E Number of Contacts 15 G 40-AP Service Rating 20 F L J K 8 40-AT 40-AU A A 40-AV D Number of Contacts 1 24 18 3 10 1 3 Contact Size 8 12 16 4 8 16 2/0 CONTACT LEGEND 16 28 12 8 4 0 2/0 4/0 GT Connector Classes 29 GT00A wall mount receptacle for front panel mounting * * * * Four through mounting holes or optional threaded holes Includes backshell for accessory attachment Without grommet and cable clamp Non-environment proof M P B T R S N F K R S L Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 .126 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2 14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2 16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2 20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2 24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7 28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7 32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3 36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3 40 51.2 11.8 80 24.1 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 30 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 GT00AF/00F wall mount receptacle for front panel mounting GT00AF * Without grommet * Cable clamp included * Non-environment proof * Four through mounting holes or optional threaded holes GT00F * With wire sealing grommet and cable clamp * For use with individual wires * Environment proof * Four through mounting holes or optional threaded holes T R S N Z M R KK P L S LL Inches L Max. M + .016 - .000 R .004 S .012 T + .004 - .000 10SL 2.362 .717 .717 14S 2.440 .717 .969 .110 .717 1.000 .126 .220 .894 4.720 .126 .906 1.181 .126 .312 1.083 16S 2.756 .717 4.720 1.079 .126 .969 1.280 .126 .437 1.181 16 2.756 4.720 .846 1.079 .126 .969 1.280 .126 .437 1.181 18 4.921 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921 20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921 22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921 24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921 28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921 32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921 36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315 40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 S 0.3 T + 0.1 - 0.0 Shell Size N + .000 - .006 P .008 Z Max. KK Max. LL Max. Millimeters Shell Size P 0.2 R 0.1 Z Max. KK Max. LL Max. 10SL 60 18.2 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120 14S 62 18.2 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120 16S 70 18.2 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120 16 70 21.5 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125 18 77 23.0 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125 20 77 23.0 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125 22 77 23.0 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125 24 85 23.0 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125 28 85 24.1 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125 32 85 24.1 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125 36 105 24.1 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135 40 130 24.1 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145 All dimensions for reference only. 31 GT00CF/00CFZ wall mount receptacle for front panel mounting GT00CF * Without individual wire sealing grommet * Environment proof * Four through mounting holes or optional threaded holes * Includes clamp to grip and seal jacketed cable GT00CFZ * Same as GT00CF except: individual wire sealing grommet included for added moisture protection * Environment proof * Four through mounting holes or optional threaded holes * Includes clamp to grip and seal jacketed cable M P T R S Z OPEN CLOSED N R L S Inches Shell Size L Approx. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 Z Open 10SL 2.740 .717 .717 .110 .717 1.000 .126 .312 .094 14S 2.898 .717 .969 .126 .906 1.181 .126 .438 .230 16S 2.898 .717 1.079 .126 .969 1.280 .126 .531 .315 16 3.217 .846 1.079 .126 .969 1.280 .126 .531 .315 18 3.307 .907 1.213 .157 1.063 1.378 .126 .625 .378 20 3.311 .907 1.346 .157 1.157 1.496 .126 .748 .445 22 3.350 .907 1.472 .157 1.252 1.614 .126 .748 .445 24 3.484 .907 1.610 .157 1.374 1.752 .146 .937 .610 28 3.736 .947 1.839 .157 1.563 2.000 .146 .937 .610 32 4.142 .947 2.102 .157 1.752 2.244 .169 1.250 .921 36 4.390 .947 2.346 .157 1.937 2.500 .169 1.378 .921 40 4.988 .947 2.579 .157 2.185 2.752 .169 1.624 1.177 Shell Size L Approx. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 Open Closed 10SL 69.6 18.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38 14S 73.6 18.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84 16S 73.6 18.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00 16 81.7 21.5 27.4 3.2 24.6 32.5 3.2 13.48 8.00 18 84.0 23.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60 20 84.1 23.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30 22 85.1 23.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30 24 88.5 23.0 40.9 4.0 34.9 44.5 3.7 23.80 15.50 28 94.9 24.1 46.7 4.0 39.7 50.8 3.7 23.80 15.50 32 105.9 24.1 53.4 4.0 44.5 57.0 4.3 31.75 23.40 36 111.5 24.1 59.6 4.0 49.2 63.5 4.3 35.00 23.40 40 126.7 24.1 65.5 4.0 55.5 69.9 4.3 41.25 29.90 Closed Millimeters All dimensions for reference only. 32 Z GT00G wall mount receptacle for front panel mounting * * * * Four through mounting holes or optional threaded holes Includes backshell with individual wire sealing grommet For use with heat-shrink tubing Environment proof M P T R N S Z BB JJ KK J R K S L Inches Shell Size J .008 K .020 L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 Z Min. BB Max. JJ .008 KK .008 10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669 14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791 16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925 16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925 18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043 20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189 22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323 24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421 28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630 32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913 36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157 40 .138 .610 3.150 .947 2.579 .157 2.185 2.752 .169 1.898 2.071 2.276 2.402 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 Millimeters Shell Size J 0.2 K 0.5 L Max. M + 0.4 - 0.0 10SL 3.5 11.7 50 18.2 18.2 2.8 18.2 25.4 14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 16S 3.5 11.7 50 18.2 27.4 3.2 24.6 16 3.5 11.5 60 21.5 27.4 3.2 18 3.5 11.5 60 23.0 30.8 20 3.5 12.7 65 23.0 34.2 22 3.5 12.7 65 23.0 24 3.5 12.7 65 28 3.5 12.7 32 3.5 36 40 Z Min. BB Max. JJ 0.2 KK 0.2 3.2 7.7 13.3 15.5 17.0 3.2 10.6 17.0 19.1 20.1 32.5 3.2 13.5 21.9 23.9 23.5 24.6 32.5 3.2 13.5 21.9 23.9 23.5 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6 23.0 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1 65 24.1 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4 15.2 70 24.1 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6 3.5 15.2 80 24.1 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8 3.5 15.5 80 24.1 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0 All dimensions for reference only. 33 GT00LCF/00LCFZ wall mount receptacle for front panel mounting GT00LCF * Includes a backshell with extended length to provide more working room for stripped jacketed cable * Environment proof * Four through mounting holes or optional threaded holes * Includes clamp to grip and seal jacketed cable GT00LCFZ * Same as GT00LCF except: individual wire sealing grommet included for added moisture protection * Environment proof * Four through mounting holes or optional threaded holes * Includes clamp to grip and seal jacketed cable M P T R S Z OPEN CLOSED N R L S Inches Shell Size L Approx. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 Z Open 10SL 3.811 .717 .717 .110 .717 1.000 .126 .312 .094 14S 3.843 .717 .969 .126 .906 1.181 .126 .438 .230 16S 3.843 .717 1.079 .126 .969 1.280 .126 .531 .315 16 4.217 .846 1.079 .126 .969 1.280 .126 .531 .315 18 4.409 .907 1.213 .157 1.063 1.378 .126 .625 .378 20 4.409 .907 1.346 .157 1.157 1.496 .126 .748 .445 22 4.413 .907 1.472 .157 1.252 1.614 .126 .748 .445 24 4.535 .907 1.610 .157 1.374 1.752 .146 .937 .610 28 4.744 .947 1.839 .157 1.563 2.000 .146 .937 .610 32 5.079 .947 2.102 .157 1.752 2.244 .169 1.250 .921 36 5.327 .947 2.346 .157 1.937 2.500 .169 1.378 .921 40 5.327 .947 2.579 .157 2.185 2.752 .169 1.624 1.177 Shell Size L Approx. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 Open Closed 10SL 96.8 18.2 18.2 2.8 18.2 25.4 3.2 7.93 2.38 14S 97.6 18.2 24.6 3.2 23.0 30.0 3.2 11.12 5.84 16S 97.6 18.2 27.4 3.2 24.6 32.5 3.2 13.48 8.00 16 107.1 21.5 27.4 3.2 24.6 32.5 3.2 13.48 8.00 18 112.0 23.0 30.8 4.0 27.0 35.0 3.2 15.87 9.60 20 112.0 23.0 34.2 4.0 29.4 38.0 3.2 19.00 11.30 22 112.1 23.0 37.4 4.0 31.8 41.0 3.2 19.00 11.30 24 115.2 23.0 40.9 4.0 34.9 44.5 3.7 23.80 15.50 28 120.5 24.1 46.7 4.0 39.7 50.8 3.7 23.80 15.50 32 129.0 24.1 53.4 4.0 44.5 57.0 4.3 31.75 23.40 36 135.3 24.1 59.6 4.0 49.2 63.5 4.3 35.00 23.40 40 135.3 24.1 65.5 4.0 55.5 69.9 4.3 41.25 29.90 Closed Millimeters All dimensions for reference only. 34 Z GT00R wall mount receptacle for front panel mounting * * * * Four through mounting holes or optional threaded holes With individual wire sealing grommet Includes backshell for conduit termination Environment proof M B P T R N S F K R L S Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 .126 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 20 1.1875-18 UNEF .866 .374 2.362 .907 1.346 .157 1.157 1.496 .126 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2 14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2 16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2 20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2 24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7 28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7 32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3 36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3 40 51.2 11.8 80 24.1 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 35 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 GT00RV wall mount receptacle for front panel mounting * * * * Four through mounting holes or optional threaded holes Includes wire sealing grommet For use with individual wires Environment proof M T R S P N KK R S L Inches L Max. M + .016 - .000 10SL 1.890 .717 .717 14S 1.890 .717 .969 16S 1.890 .717 1.079 .126 16 2.205 .846 1.079 .126 .969 1.280 .126 1.024 18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161 20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299 22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417 24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575 28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811 32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028 36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283 40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539 Shell Size L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 KK Max. 10SL 48.0 18.2 18.2 2.8 18.2 25.4 3.2 20.0 14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 24.0 16S 48.0 18.2 27.4 3.2 24.6 32.5 3.2 26.0 16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 26.0 18 57.0 23.0 30.8 4.0 27.0 35.0 3.2 29.5 20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 33.0 22 57.0 23.0 37.4 4.0 31.8 41.0 3.2 36.0 24 57.0 23.0 40.9 4.0 34.9 44.5 3.7 40.0 28 57.0 24.1 46.7 4.0 39.7 50.8 3.7 46.0 32 60.0 24.1 53.4 4.0 44.5 57.0 4.3 51.5 36 60.0 24.1 59.6 4.0 49.2 63.5 4.3 58.0 40 60.0 24.1 65.5 4.0 55.5 69.9 4.3 64.5 Shell Size N + .000 - .006 R .004 S .012 T + .004 - .000 .110 .717 1.000 .126 .126 .906 1.181 .126 .945 .969 1.280 .126 1.024 P .008 KK Max. .787 Millimeters All dimensions for reference only. 36 GT01A inline receptacle * * * Includes backshell for accessory attachment Without wire sealing grommet and cable clamp Non-environment proof M P B N F Q K S L Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370 20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756 P .008 Q .008 S Max. Millimeters F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2 14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8 16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3 16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3 18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8 20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8 22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1 24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6 28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9 32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1 36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6 40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0 Shell Size All dimensions for reference only. 37 N + 0.00 - 0.15 P 0.2 Q 0.2 S Max. GT01AF/01F inline receptacle GT01F * With wire sealing grommet and cable clamp * For use with individual wires * Environment proof GT01AF * With cable clamp * Wire sealing grommet not included * Non-environment proof N Z KK Q M P S L LL Inches Shell Size L Max. M + .016 - .000 N + .000 - .006 P .008 Q .008 S Max. Z Nominal KK Max. LL Max. 4.720 10SL 2.362 .717 .717 .110 .811 .992 .220 .894 14S 2.440 .717 .969 .126 1.000 1.173 .312 1.083 4.720 16S 2.756 .717 1.079 .126 1.126 1.272 .437 1.181 4.720 16 2.756 .846 1.079 .126 1.126 1.272 .437 1.181 4.921 18 3.031 .907 1.213 .157 1.248 1.370 .562 1.300 4.921 20 3.031 .907 1.346 .157 1.374 1.488 .625 1.476 4.921 22 3.031 .907 1.472 .157 1.500 1.618 .625 1.476 4.921 24 3.346 .907 1.610 .157 1.626 1.756 .750 1.705 4.921 28 3.346 .947 1.839 .157 1.874 2.004 .750 1.705 4.921 32 3.346 .947 2.102 .157 2.126 2.248 .937 2.035 4.921 36 4.134 .947 2.346 .157 2.386 2.504 1.250 2.283 5.315 40 5.118 .947 2.579 .157 2.618 2.756 1.375 2.579 5.709 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 Millimeters Shell Size P 0.2 Q 0.2 S Max. Z Nominal KK Max. LL Max. 120 10SL 60 18.2 18.2 2.8 20.6 25.2 5.58 22.7 14S 62 18.2 24.6 3.2 25.4 29.8 7.92 27.5 120 16S 70 18.2 27.4 3.2 28.6 32.3 11.09 30.0 120 16 70 21.5 27.4 3.2 28.6 32.3 11.09 30.0 125 18 77 23.0 30.8 4.0 31.7 34.8 14.27 33.0 125 20 77 23.0 34.2 4.0 34.9 37.8 15.87 37.5 125 22 77 23.0 37.4 4.0 38.1 41.1 15.87 37.5 125 24 85 23.0 40.9 4.0 41.3 44.6 19.05 43.3 125 28 85 24.1 46.7 4.0 47.6 50.9 19.05 43.3 125 32 85 24.1 53.4 4.0 54.0 57.1 23.79 51.7 125 36 105 24.1 59.6 4.0 60.6 63.6 31.75 58.0 135 40 130 24.1 65.5 4.0 66.5 70.0 34.92 65.5 145 All dimensions for reference only. 38 GT01G inline receptacle * * * Includes wire sealing grommet For use with heat-shrink tubing Environment proof M P N Z Q BB JJ KK J K L S Inches J .008 K .020 L Max. M + .016 - .000 N + .000 - .006 10SL .138 .461 1.969 .717 .717 .110 .811 .992 .303 .524 .610 .669 14S .138 .461 1.969 .717 .969 .126 1.000 1.173 .417 .669 .752 .791 16S .138 .461 1.969 .717 1.079 .126 1.126 1.272 .531 .862 .941 .925 16 .138 .453 2.362 .846 1.079 .126 1.126 1.272 .531 .862 .941 .925 18 .138 .453 2.362 .907 1.213 .157 1.248 1.370 .575 .862 .941 1.043 20 .138 .500 2.559 .907 1.346 .157 1.374 1.488 .736 1.031 1.165 1.189 22 .138 .500 2.559 .907 1.472 .157 1.500 1.618 .819 1.031 1.165 1.323 24 .138 .500 2.559 .907 1.610 .157 1.626 1.756 .969 1.358 1.488 1.421 28 .138 .500 2.559 .947 1.839 .157 1.874 2.004 1.063 1.358 1.488 1.630 32 .138 .598 2.756 .947 2.102 .157 2.126 2.248 1.311 1.717 1.882 1.913 36 .138 .598 3.150 .947 2.346 .157 2.386 2.504 1.516 1.717 1.882 2.157 40 .138 .610 3.150 .947 2.579 1.57 2.618 2.756 1.898 2.071 2.276 2.402 K 0.5 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 Q 0.2 S Max. Shell Size P .008 Q .008 S Max. Z Min. BB Max. JJ .008 KK .008 Millimeters Shell Size J 0.2 Z Min. B Max. JJ 0.2 KK 0.2 10SL 3.5 11.7 50 18.2 18.2 2.8 20.6 14S 3.5 11.7 50 18.2 24.6 3.2 25.4 25.2 7.7 13.3 15.5 17.0 29.8 10.6 17.0 19.1 16S 3.5 11.7 50 18.2 27.4 3.2 20.1 28.6 32.3 13.5 21.9 23.9 16 3.5 11.5 60 21.5 27.4 23.5 3.2 28.6 32.3 13.5 21.9 23.9 18 3.5 11.5 60 23.0 23.5 30.8 4.0 31.7 34.8 14.6 21.9 23.9 20 3.5 12.7 65 26.5 23.0 34.2 4.0 34.9 37.8 18.7 26.2 29.6 22 3.5 12.7 30.2 65 23.0 37.4 4.0 38.1 41.1 20.8 26.2 29.6 24 3.5 33.6 12.7 65 23.0 40.9 4.0 41.3 44.6 24.6 34.5 37.8 28 36.1 3.5 12.7 65 24.1 46.7 4.0 47.6 50.9 27.0 34.5 37.8 41.4 32 3.5 15.2 70 24.1 53.4 4.0 54.0 57.1 33.3 43.6 47.8 48.6 36 3.5 15.2 80 24.1 59.6 4.0 60.6 63.6 38.5 43.6 47.8 54.8 40 3.5 15.5 80 24.1 65.5 4.0 66.5 70.0 48.2 52.6 57.8 61.0 All dimensions for reference only. 39 GT01LCF/01LCFZ inline receptacle GT01LCF * Long backshell provides more working room for stripped jacketed cable * Includes cable clamp to grip and seal jacketed cable * Environment proof GT01LCFZ * Same as GT01LCF except: individual wire sealing grommet included for added moisture protection * Environment proof M P Z OPEN CLOSED N Q S L Inches Shell Size L Approx. M + .016 - .000 N + .000 - .006 P .008 Q .008 S Max. Z Open 10SL 3.811 .717 .717 .110 .811 .992 .312 .094 14S 3.843 .717 .969 .126 1.000 1.173 .438 .230 16S 3.843 .717 1.079 .126 1.126 1.272 .531 .315 16 4.217 .846 1.079 .126 1.126 1.272 .531 .315 18 4.409 .907 1.213 .157 1.248 1.370 .625 .378 20 4.409 .907 1.346 .157 1.374 1.488 .748 .445 22 4.413 .907 1.472 .157 1.500 1.618 .748 .445 24 4.535 .907 1.610 .157 1.626 1.756 .937 .610 28 4.744 .947 1.839 .157 1.874 2.004 .937 .610 32 5.079 .947 2.102 .157 2.126 2.248 1.250 .921 36 5.327 .947 2.346 .157 2.386 2.504 1.378 .921 40 5.327 .947 2.579 .157 2.618 2.756 1.624 1.177 Shell Size L Approx. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 Q 0.2 S Max. Open 10SL 96.8 18.2 18.2 2.8 20.6 25.2 7.93 2.38 14S 97.6 18.2 24.6 3.2 25.4 29.8 11.12 5.84 16S 97.6 18.2 27.4 3.2 28.6 32.3 13.48 8.00 107.1 21.5 27.4 3.2 28.6 32.3 13.48 8.00 Closed Millimeters 16 Z Closed 18 112.0 23.0 30.8 4.0 31.7 34.8 15.87 9.60 20 112.0 23.0 34.2 4.0 34.9 37.8 19.00 11.30 22 112.1 23.0 37.4 4.0 38.1 41.1 19.00 11.30 24 115.2 23.0 40.9 4.0 41.3 44.6 23.80 15.50 28 120.5 24.1 46.7 4.0 47.6 50.9 23.80 15.50 32 129.0 24.1 53.4 4.0 54.0 57.1 31.75 23.40 36 135.3 24.1 59.6 4.0 60.6 63.6 35.00 23.40 40 135.3 24.1 65.5 4.0 66.5 70.0 41.25 29.90 All dimensions for reference only. 40 GT01R inline receptacle * * * With individual wire sealing grommet Includes backshell for conduit termination Environment proof M P B N F Q K L S Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370 20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756 P .008 Q .008 S Max. Millimeters F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2 14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8 16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3 16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3 18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8 20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8 22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1 24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6 28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9 32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1 36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6 40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0 Shell Size All dimensions for reference only. 41 N + 0.00 - 0.15 P 0.2 Q 0.2 S Max. GT01RV inline receptacle * * * Includes wire sealing grommet For use with individual wires Environment proof M P N KK Q L S Inches M + .016 - .000 N + .000 - .006 Shell Size L Max. P .008 10SL 1.890 .717 .717 .110 14S 1.890 .717 .969 .126 16S 1.890 .717 1.079 .126 16 2.205 .846 1.079 18 2.244 .907 1.213 20 2.244 .907 22 2.244 24 Q .008 S Max. KK Max. .811 .992 .787 1.000 1.173 .945 1.126 1.272 1.024 .126 1.126 1.272 1.024 .157 1.248 1.370 1.161 1.346 .157 1.374 1.488 1.299 .907 1.472 .157 1.500 1.618 1.417 2.244 .907 1.610 .157 1.626 1.756 1.575 28 2.244 .947 1.839 .157 1.874 2.004 1.811 32 2.362 .947 2.102 .157 2.126 2.248 2.028 36 2.362 .947 2.346 .157 2.386 2.504 2.283 40 2.362 .947 2.579 .157 2.618 2.756 2.539 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 Millimeters Shell Size P 0.2 Q 0.2 S Max. KK Max. 10SL 48.0 18.2 18.2 2.8 20.6 25.2 20.0 14S 48.0 18.2 24.6 3.2 25.4 29.8 24.0 16S 48.0 18.2 27.4 3.2 28.6 32.3 26.0 16 56.0 21.5 27.4 3.2 28.6 32.3 26.0 18 57.0 23.0 30.8 4.0 31.7 34.8 29.5 20 57.0 23.0 34.2 4.0 34.9 37.8 33.0 22 57.0 23.0 37.4 4.0 38.1 41.1 36.0 24 57.0 23.0 40.9 4.0 41.3 44.6 40.0 28 57.0 24.1 46.7 4.0 47.6 50.9 46.0 32 60.0 24.1 53.4 4.0 54.0 57.1 51.5 36 60.0 24.1 59.6 4.0 60.6 63.6 58.0 40 60.0 24.1 65.5 4.0 66.5 70.0 64.5 All dimensions for reference only. 42 GT02R/02RFS box mount receptacle for front panel mounting GT02R * Environment proof when mounted with proper panel sealing gasket (see page 79) * For rear mounting information see page 85 GT02RFS * Same as GT02R except mounting holes are countersunk to allow mating of plugs with rubber covered coupling nuts M P T 82 R S N KK T GT02RFS Countersunk holes required when mating with GT06CFGG, page 55 and GT08CFGG, page 73 L R S Inches M + .016 - .000 N + .000 - .006 P .008 L .012 10SL 1.087 .717 .717 .110 .717 1.000 .126 .626 14S 1.087 .717 .969 .126 .906 1.181 .126 .756 16S 1.087 .717 1.079 .126 .969 1.280 .126 .882 16 1.331 .846 1.079 .126 .969 1.280 .126 .882 18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008 20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142 22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268 24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390 28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630 32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882 36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063 40 1.469 .947 2.579 .157 2.185 2.752 .169 2.323 Shell Size L 0.3 M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 KK Max. 10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 15.9 14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 19.2 16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 22.4 16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 22.4 18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 25.6 20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 29.0 22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 32.2 24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 35.3 28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 41.4 32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 47.8 36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 52.4 40 37.3 24.1 65.5 4.0 55.5 69.9 4.3 59.0 All dimensions for reference only. 43 R .004 S .012 T + .004 - .000 Shell Size KK Max. GT020R/020RFSM box mount receptacle for front panel mounting GT020R * Threaded rear to accept accessory hardware * Environment proof when mounted with proper panel sealing gasket (see page 79) * For rear mounting information see page 85 GT020RFSM * Same as GT020R except mounting holes are countersunk to allow mating of plugs with rubber covered coupling nuts M P T 82 R N S B T L R GT020RFSM Countersunk holes required when mating with GT06CFGG, page 55 and GT08CFGG, page 73 S Inches Shell Size B Thread Class 2A L .012 M + .016 - .000 N + .000 - .006 R .004 S .012 T + .004 - .000 10SL .6250-24UNEF 1.087 .717 .717 14S .7500-20UNEF 1.087 .717 .969 .110 .717 1.000 .126 .126 .906 1.181 16S .8750-20UNEF 1.087 .717 .126 1.079 .126 .969 1.280 .126 16 .8750-20UNEF 1.331 18 1.0000-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126 .907 1.213 .157 1.063 1.378 20 1.1250-18UNEF .126 1.331 .907 1.346 .157 1.157 1.496 22 .126 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126 24 1.3750-18UNEF 1.331 .907 1.610 .157 1.374 1.752 .146 28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146 32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169 36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169 40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169 P .008 Millimeters Shell Size L 0.3 M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 40 37.3 24.1 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 44 GT030 square flange receptacle for rear panel mounting * * * Four through mounting holes or optional threaded holes Threaded rear to accept accessory attachment Environment proof when mounted with a proper sealing gasket (see page 79) M P T R S N B L R S Inches Shell Size B Thread Class 2A L .012 M + .016 - .000 N + .000 - .006 R .004 S .012 T + .004 - .000 10SL .6250-24UNEF 1.087 .717 .717 14S .7500-20UNEF 1.087 .717 .969 .110 .717 1.000 .126 .126 .906 1.181 16S .8750-20UNEF 1.087 .717 .126 1.079 .126 .969 1.280 .126 16 .8750-20UNEF 1.331 18 1.0000-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126 .907 1.213 .157 1.063 1.378 20 1.1250-18UNEF .126 1.331 .907 1.346 .157 1.157 1.496 22 .126 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126 24 1.3750-18UNEF 1.331 .907 1.610 .157 1.374 1.752 .146 28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146 32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169 36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169 40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169 P .008 Millimeters Shell Size L 0.3 M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 18 33.8 23.05 30.8 4.0 27.0 35.0 3.2 20 33.8 23.05 34.2 4.0 29.4 38.0 3.2 22 33.8 23.05 37.4 4.0 31.8 41.0 3.2 24 33.8 23.05 40.9 4.0 34.9 44.5 3.7 28 35.7 24.05 46.7 4.0 39.7 50.8 3.7 32 37.3 24.05 53.4 4.0 44.5 57.0 4.3 36 37.3 24.05 59.6 4.0 49.2 63.5 4.3 40 37.3 24.05 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 45 GT030A square flange receptacle for rear panel mounting * * * * Four through mounting holes or optional threaded holes Backshell included for accessory attachment Without a wire sealing grommet and cable clamp Non-environment proof M P B T R S N F K R L S Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 .126 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2 14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2 16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2 16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2 18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2 20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2 22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2 24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7 28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7 32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3 36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3 40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 46 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 GT030AF/030F square flange receptacle for rear panel mounting GT030AF * Includes a cable clamp * Wire sealing grommet not included * Non-environment proof * Four through mounting holes or optional threaded holes GT030F * Includes a wire sealing grommet and cable clamp * For use with individual wires * Environment proof * Four through mounting holes or optional threaded holes M P T R S N Z KK L R S LL Inches L Max. M + .016 - .000 R .004 S .012 T + .004 - .000 10SL 2.362 .717 .717 14S 2.440 .717 .969 .110 .717 1.000 .126 .220 .894 4.720 .126 .906 1.181 .126 .312 1.083 16S 2.756 .717 4.720 1.079 .126 .969 1.280 .126 .437 1.181 16 2.756 4.720 .846 1.079 .126 .969 1.280 .126 .437 1.181 18 4.921 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921 20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921 22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921 24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921 28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921 32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921 36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315 40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 S 0.3 T + 0.1 - 0.0 Shell Size N + .000 - .006 P .008 Z Nominal KK Max. LL Max. Millimeters Shell Size P 0.2 R 0.1 Z Nominal KK Max. LL Max. 10SL 60 18.20 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120 14S 62 18.20 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120 16S 70 18.20 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120 16 70 21.50 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125 18 77 23.05 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125 20 77 23.05 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125 22 77 23.05 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125 24 85 23.05 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125 28 85 24.05 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125 32 85 24.05 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125 36 105 24.05 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135 40 130 24.05 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145 All dimensions for reference only. 47 GT030G square flange receptacle for rear panel mounting * * * * Four through mounting holes or optional threaded holes With wire sealing grommet for individual wires Includes backshell for use with heat-shrink tubing Environment proof M P T R N S Z BB JJ KK J R K S L Inches Shell Size J .008 K .020 L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 Z Min. BB Max. JJ .008 KK .008 10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669 14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791 16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925 16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925 18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043 20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189 22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323 24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421 28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.063 1.358 1.488 1.630 32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913 36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157 40 .138 .610 3.150 .947 2.579 1.57 2.185 2.752 .169 1.898 2.071 2.276 2.402 L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 S 0.3 T + 0.1 - 0.0 Millimeters Shell Size J 0.2 K 0.5 P 0.2 R 0.1 10SL 3.5 11.7 50 18.20 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0 14S 3.5 11.7 50 18.20 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1 16S 3.5 11.7 50 18.20 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5 16 3.5 11.5 60 21.50 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5 18 3.5 11.5 60 23.05 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5 20 3.5 12.7 65 23.05 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2 22 3.5 12.7 65 23.05 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6 24 3.5 12.7 65 23.05 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1 28 3.5 12.7 65 24.05 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4 32 3.5 15.2 70 24.05 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6 36 3.5 15.2 80 24.05 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8 40 3.5 15.5 80 24.05 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0 All dimensions for reference only. 48 Z Min. B Max. JJ 0.2 KK 0.2 GT030LCF/030LCFZ square flange receptacle for rear panel mounting GT030LCF * Four through mounting holes or optional threaded holes * With cable clamp and seal * Long backshell provides more working room for jacketed cable * Environment proof GT030LCFZ * Same as GT030LCF except: Individual wire sealing grommet for added moisture protection * Environment proof M T R P Z OPEN CLOSED N S R L S Inches Shell Size L Approx. M +.016 -.000 N +.000 -.006 P .008 R .004 S .012 T +.004 -.000 Z Open Closed 10SL 3.811 .717 .717 .110 .717 1.000 .126 .312 .094 14S 3.843 .717 .969 .126 .906 1.181 .126 .438 .230 16S 3.843 .717 1.079 .126 .969 1.280 .126 .531 .315 16 4.217 .846 1.079 .126 .969 1.280 .126 .531 .315 18 4.409 .907 1.213 .157 1.063 1.378 .126 .625 .378 20 4.409 .907 1.346 .157 1.157 1.496 .126 .748 .445 22 4.413 .907 1.472 .157 1.252 1.614 .126 .748 .445 24 4.535 .907 1.610 .157 1.374 1.752 .146 .937 .610 28 4.744 .947 1.839 .157 1.563 2.000 .146 .937 .610 32 5.079 .947 2.102 .157 1.752 2.244 .169 1.250 .921 36 5.327 .947 2.346 .157 1.937 2.500 .169 1.378 .921 40 5.327 .947 2.579 1.57 2.185 2.752 .169 1.624 1.177 Shell Size L Approx. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 Open 10SL 96.8 18.20 18.2 2.8 18.2 25.4 3.2 7.93 2.38 14S 97.6 18.20 24.6 3.2 23.0 30.0 3.2 11.12 5.84 Millimeters Z Closed 16S 97.6 18.20 27.4 3.2 24.6 32.5 3.2 13.48 8.00 16 107.1 21.50 27.4 3.2 24.6 32.5 3.2 13.48 8.00 18 112.0 23.05 30.8 4.0 27.0 35.0 3.2 15.87 9.60 20 112.0 23.05 34.2 4.0 29.4 38.0 3.2 19.00 11.30 22 112.1 23.05 37.4 4.0 31.8 41.0 3.2 19.00 11.30 24 115.2 23.05 40.9 4.0 34.9 44.5 3.7 23.80 15.50 28 120.5 24.05 46.7 4.0 39.7 50.8 3.7 23.80 15.50 32 129.0 24.05 53.4 4.0 44.5 57.0 4.3 31.75 23.40 36 135.3 24.05 59.6 4.0 49.2 63.5 4.3 35.00 23.40 40 135.3 24.05 65.5 4.0 55.5 69.9 4.3 41.25 29.90 All dimensions for reference only. 49 GT030R square flange receptacle for rear panel mounting * * * * Four through mounting holes or optional threaded holes With a wire sealing grommet for individual wires Includes backshell for conduit termination Environment proof M P B T R S N F K R S L Inches Shell Size B Thread Class 2A F Min. K Min. L Max. M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 .126 10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126 16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126 16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126 18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126 20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126 22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126 24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146 28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146 32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169 36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169 40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169 Millimeters Shell Size F Min. K Min. L Max. M + 0.4 - 0.0 10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2 14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2 16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2 16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2 18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2 20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2 22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2 24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7 28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7 32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3 36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3 40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3 All dimensions for reference only. 50 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 GT030RV square flange receptacle for rear panel mounting * * * Four through mounting holes or optional threaded holes With wire sealing grommet for individual wires Environment proof M P T R N S KK R L S Inches L Max. M + .016 - .000 10SL 1.890 .717 .717 14S 1.890 .717 .969 16S 1.890 .717 1.079 .126 16 2.205 .846 1.079 .126 .969 1.280 .126 1.024 18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161 20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299 22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417 24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575 28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811 32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028 36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283 40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539 Shell Size L Max. M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 KK Max. 10SL 48.0 18.20 18.2 2.8 18.2 25.4 3.2 20.0 14S 48.0 18.20 24.6 3.2 23.0 30.0 3.2 24.0 16S 48.0 18.20 27.4 3.2 24.6 32.5 3.2 26.0 16 56.0 21.50 27.4 3.2 24.6 32.5 3.2 26.0 18 57.0 23.05 30.8 4.0 27.0 35.0 3.2 29.5 20 57.0 23.05 34.2 4.0 29.4 38.0 3.2 33.0 22 57.0 23.05 37.4 4.0 31.8 41.0 3.2 36.0 24 57.0 23.05 40.9 4.0 34.9 44.5 3.7 40.0 28 57.0 24.05 46.7 4.0 39.7 50.8 3.7 46.0 32 60.0 24.05 53.4 4.0 44.5 57.0 4.3 51.5 36 60.0 24.05 59.6 4.0 49.2 63.5 4.3 58.0 40 60.0 24.05 65.5 4.0 55.5 69.9 4.3 64.5 Shell Size N + .000 - .006 R .004 S .012 T + .004 - .000 .110 .717 1.000 .126 .126 .906 1.181 .126 .945 .969 1.280 .126 1.024 P .008 KK Max. .787 Millimeters All dimensions for reference only. 51 GT06A straight plug * * * Without grommet and cable clamp If a cable clamp is required, see pages 82 and 84 Non-environment proof B F K L Q Inches Shell Size B Thread Class 2A F Min. K Min. L Max. Q Max. 10SL .6250-24UNEF .409 .374 1.969 .898 14S .7500-20UNEF .520 .374 1.969 1.150 16S .8750-20UNEF .638 .374 1.969 1.260 16 .8750-20UNEF .638 .374 2.362 1.260 18 1.0000-20UNEF .756 .374 2.362 1.437 20 1.1875-18UNEF .867 .374 2.362 1.571 22 1.1875-18UNEF .965 .374 2.362 1.697 24 1.4375-18UNEF 1.094 .374 2.560 1.835 28 1.4375-18UNEF 1.228 .374 2.560 2.102 32 1.7500-18UNS 1.488 .433 2.560 2.366 36 2.0000-18UNS 1.780 .465 3.150 2.610 40 2.2500-16UN 2.016 .465 3.150 2.850 Millimeters Shell Size F Min. K Min. L Max. Q Max. 10SL 10.4 9.5 50 22.8 14S 13.2 9.5 50 29.2 16S 16.2 9.5 50 32.0 16 16.2 9.5 60 32.0 18 19.2 9.5 60 36.5 20 22.0 9.5 60 39.9 22 24.5 9.5 60 43.1 24 27.8 9.5 65 46.6 28 31.2 9.5 65 53.4 32 37.8 11.0 65 60.1 36 45.2 11.8 80 66.3 40 51.2 11.8 80 72.4 All dimensions for reference only. 52 GT06AF/06F straight plug GT06AF * With a cable clamp * Wire sealing grommet not supplied * Non-environment proof GT06F * With a wire sealing grommet and cable clamp * For use with individual wires * Environment proof Z L Q LL Inches Shell Size L Max. Q Max. Z Nominal KK Max. LL Max. 10SL 2.165 .898 .220 .894 4.724 14S 2.362 1.150 .312 1.083 4.724 16S 2.756 1.260 .437 1.181 4.724 16 2.756 1.260 .437 1.181 4.921 18 2.953 1.437 .562 1.299 4.921 20 2.953 1.571 .625 1.476 4.921 22 2.953 1.697 .625 1.476 4.921 24 3.543 1.835 .750 1.705 4.921 28 3.543 2.102 .750 1.705 4.921 32 3.543 2.366 .937 2.035 4.921 36 3.937 2.610 1.250 2.283 5.315 40 4.921 2.850 1.375 2.579 5.709 Millimeters Shell Size L Max. 10SL 55 14S 60 16S 70 16 18 Q Max. Z Nominal KK Max. LL Max. 22.8 5.58 22.7 120 29.2 7.92 27.5 120 32.0 11.09 30.0 120 70 32.0 11.09 30.0 125 75 36.5 14.27 33.0 125 20 75 39.9 15.87 37.5 125 22 75 43.1 15.87 37.5 125 24 90 46.6 19.05 43.3 125 28 90 53.4 19.05 43.3 125 32 90 60.1 23.79 51.7 125 36 100 66.3 31.75 58.0 135 40 125 72.4 34.92 65.5 145 All dimensions for reference only. 53 KK GT06CF straight plug * * * With a cable clamp and seal For use with jacketed cable Environment proof L Z J Cable jacket Strip length Q Inches Z Shell Size J Approx. L Approx. Q Max. Open Closed 10SL .551 2.752 .898 .312 .094 14S .732 2.898 1.150 .438 .230 16S .732 2.898 1.260 .531 .315 16 .653 3.216 1.260 .531 .315 18 .705 3.307 1.437 .625 .378 20 .705 3.311 1.571 .748 .445 22 .744 3.350 1.697 .748 .445 24 .689 3.484 1.835 .937 .610 28 .921 3.736 2.102 .937 .610 32 1.016 4.142 2.366 1.250 .921 36 1.031 4.390 2.610 1.378 .921 40 1.614 4.640 2.854 1.624 1.177 Millimeters Shell Size J Approx. L Approx. Q Max. Z Open Closed 10SL 14.0 69.6 22.8 7.93 2.38 14S 18.6 73.6 29.2 11.12 5.84 16S 18.6 73.6 32.0 13.48 8.00 16 16.6 81.7 32.0 13.48 8.00 18 17.9 84.0 36.5 15.87 9.60 20 17.9 84.1 39.9 19.00 11.30 22 18.9 85.1 43.1 19.00 11.30 24 17.5 88.5 46.6 23.80 15.50 28 23.4 94.9 53.4 23.80 15.50 32 25.8 105.2 60.1 31.75 23.40 36 26.2 111.5 66.3 35.00 23.40 40 41.0 111.5 72.5 41.25 29.90 All dimensions for reference only. 54 OPEN CLOSED GT06CFGG straight plug * * * * With rubber covered coupling nut for extreme shock applications The shrouded coupling nut protects the plug from damage Provides a superior gripping surface Seals the bayonet ramps * * * Q Includes a backshell Mates with GT020RFSM (see page 44) Environment proof L S Z OPEN CLOSED J Cable jacket Strip length Inches Z Shell Size J Approx. L Approx. Q Max. S Dia. Open Closed 10SL .551 3.150 1.319 1.122 .312 .094 18 .701 3.346 1.929 1.713 .625 .378 20 .705 3.937 2.028 1.811 .748 .445 22 .705 3.937 2.224 1.988 .748 .445 24 .689 4.016 2.362 2.126 .937 .610 28 .921 4.291 2.638 2.402 .937 .610 32 1.016 5.315 2.992 2.661 1.250 .921 36 1.031 5.039 3.240 2.925 1.378 .921 40 1.614 5.315 3.465 3.150 1.624 1.177 Millimeters Z Shell Size J Approx. L Approx. Q Max. S Dia. Open Closed 10SL 14.0 80 33.5 28.5 7.93 2.38 18 17.8 85 49.0 43.5 15.87 9.60 20 17.9 100 51.5 46.0 19.00 11.30 22 17.9 100 56.5 50.5 19.00 11.30 24 17.5 102 60.0 54.0 23.80 15.50 28 23.4 109 67.0 61.0 23.80 15.50 32 25.6 135 76.0 67.6 31.75 23.40 36 26.2 128 82.3 74.3 35.00 23.40 40 41.0 135 88.0 80.0 41.25 29.90 All dimensions for reference only. 55 GT06G straight plug * * * * With a wire sealing grommet For use with individual wires Includes a backshell for use with heat-shrink tubing Environment proof Z BB JJ KK J K Q L Inches Shell Size J .008 K .020 L Max. Q Max. Z Min. BB Max. JJ .008 KK .008 10SL .138 .461 14S .138 .461 1.969 .898 .303 .524 .610 .669 1.969 1.150 .417 .669 .752 16S .138 .791 .461 1.969 1.260 .531 .862 .941 16 .925 .138 .453 2.362 1.260 .531 .862 .941 .925 18 .138 .453 2.362 1.437 .575 .862 .941 1.043 20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189 22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323 24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421 28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630 32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913 36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157 40 .138 .610 3.150 2.854 1.898 2.071 2.276 2.402 Millimeters Shell Size J 0.2 K 0.5 L Max. Q Max. Z Min. BB Max. JJ 0.2 KK 0.2 10SL 3.5 11.7 50 14S 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0 29.2 10.6 17.0 19.1 16S 3.5 11.7 20.1 50 32.0 13.5 21.9 23.9 16 3.5 23.5 11.5 60 32.0 13.5 21.9 23.9 18 23.5 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5 20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2 22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6 24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1 28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4 32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6 36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8 40 3.5 15.2 80 72.5 48.2 52.6 57.8 61.0 All dimensions for reference only. 56 GT06G2 straight plug * * * * For use with individual wires and termination of heat shrink tubing With individual wire sealing grommet Backshell includes free spinning adapter Environment proof M .138.008 E R D Q C L Inches Shell Size C Min. D Max. E .008 L Max. 10SL .303 .524 .610 1.969 14S .417 .669 .752 1.969 16S .531 .862 .941 1.969 16 .531 .862 .941 18 .637 .862 20 .736 22 .877 24 M .020 Q Max. R .007 .461 .898 .669 .461 1.150 .791 .461 1.299 .925 2.362 .453 1.299 .925 .941 2.362 .453 1.437 1.043 1.031 1.165 2.559 .500 1.571 1.189 1.031 1.165 2.559 .500 1.697 1.323 .969 1.358 1.488 2.559 .500 1.835 1.421 28 1.094 1.358 1.488 2.559 .500 2.102 1.630 32 1.392 1.717 1.882 2.756 .598 2.366 1.913 36 1.539 1.717 1.882 3.150 .598 2.610 2.157 40 1.898 2.071 2.276 3.150 .610 2.850 2.402 Millimeters Shell Size C Min. D Max. E .008 L Max. M .020 Q Max. R .007 10SL 7.7 13.3 15.5 50.0 11.7 22.8 17.0 14S 10.6 17.0 19.1 50.0 11.7 29.2 20.1 16S 13.5 21.9 23.9 50.0 11.7 32.0 23.5 16 13.5 21.9 23.9 60.0 11.5 32.0 23.5 18 16.2 21.9 23.9 60.0 11.5 36.5 26.5 20 18.7 26.2 29.6 65.0 12.7 39.9 30.2 22 22.3 26.2 29.6 65.0 12.7 43.1 33.6 24 24.6 34.5 37.8 65.0 12.7 46.6 36.0 28 27.8 34.5 37.8 65.0 12.7 53.4 41.4 32 35.4 43.6 47.8 70.0 15.2 60.1 48.6 36 39.1 43.6 47.8 80.0 15.2 66.3 54.8 40 48.2 52.6 57.8 80.0 15.5 72.5 61.0 All dimensions for reference only. 57 GT06LC straight plug * * Includes a backshell with a basket weave strain relief cord grip Environment proof L Cable Range Min./Max. Q Inches Cable Range Shell Size L Ref. Q Max. 10SL 3.000 14S 16S Min. Max. .898 AXX Part No. Suffix* A16 .250 .375 3.000 1.150 A54 .375 .500 3.000 1.260 A10 .500 .625 16 3.250 1.260 A12 .625 .750 18 3.250 1.437 A42 .750 .875 20 3.250 1.571 A11 .875 1.000 22 3.250 1.697 A55 1.000 1.125 24 28 3.250 3.600 1.835 2.102 A14 A56 1.125 1.250 1.250 1.375 32 3.600 2.366 A74 1.375 1.500 36 3.600 2.610 A57 1.500 1.625 40 3.600 2.854 A58 1.625 1.750 Millimeters Cable Range Shell Size L Ref. Q Max. 10SL 76.2 22.8 AXX Part No. Suffix* A16 14S 76.2 29.2 A54 9.5 12.7 16S 76.2 32.0 A10 12.7 15.8 16 82.5 32.0 A12 15.8 19.0 18 82.5 36.4 A42 19.0 22.2 20 82.5 39.9 A11 22.2 25.4 22 82.5 43.1 A55 25.4 28.5 24 82.5 46.6 A14 28.5 31.7 28 91.4 53.3 A56 31.7 34.9 32 91.4 60.0 A74 34.9 38.1 36 91.4 66.2 A57 38.1 41.2 40 91.4 72.4 All dimensions for reference only. Min. 6.3 Max. 9.5 A58 41.2 44.4 * For example, typical part number would be: GTC06LC28-8PA59 58 GT06LCF/06LCFZ straight plug GT06LCFZ * Same as GT06LCF except: Individual wire sealing grommet for added moisture protection * Environment proof GT06LCF * With cable clamp and seal * Long backshell provides more working room for jacketed cable * Environment proof L Z OPEN CLOSED Q Inches Shell Size Z L Approx. Q Max. Open Closed 10SL 3.811 .898 .312 .094 14S 3.843 1.150 .438 .230 16S 3.843 1.260 .531 .315 16 4.217 1.260 .531 .315 18 4.409 1.437 .625 .378 20 4.409 1.571 .748 .445 22 4.413 1.697 .748 .445 24 4.535 1.835 .937 .610 28 4.756 2.102 .937 .610 32 5.079 2.366 1.250 .921 36 5.327 2.610 1.378 .921 40 5.327 2.854 1.624 1.177 Millimeters Shell Size Z L Approx. Q Max. Open Closed 10SL 96.8 22.8 7.93 2.38 14S 97.6 29.2 11.12 5.84 16S 97.6 32.0 13.48 8.00 16 107.1 32.0 13.48 8.00 18 112.0 36.5 15.87 9.60 20 112.0 39.9 19.00 11.30 22 112.1 43.1 19.00 11.30 24 115.2 46.6 23.80 15.50 28 120.8 53.4 23.80 15.50 32 129.0 60.1 31.75 23.40 36 135.3 66.3 35.00 23.40 40 135.3 72.5 41.25 29.90 All dimensions for reference only. 59 GT06LT straight plug * * * For termination of metallic core conduit With individual wire sealing grommet Environment proof L C DIA. OF CONDUIT Q Inches Shell Size L Max. Q Max. 10SL .898 14S 1.150 16S 1.299 16 18 20 22 24 1.299 Dependent on Conduit and Shell Combination 1.437 Consult Amphenol, Sidney, NY for further information 1.697 1.571 1.835 28 2.102 32 2.366 36 2.610 40 2.850 Millimeters Shell Size L Max. Q Max. 10SL 22.81 14S 29.21 16S 32.99 16 18 20 22 24 32.99 Dependent on Conduit and Shell Combination 36.50 Consult Amphenol, Sidney, NY for further information 43.10 39.90 46.61 28 53.39 32 60.10 36 66.29 40 72.39 All dimensions for reference only. 60 Inches C Conduit Size 3/8 1/2 3/4 1 1-1/4 1-1/2 2 GT06PFC straight plug * * * For termination of plastic flexible corrugated conduit With individual wire sealing grommet Environment proof L C DIA. OF CONDUIT Q Inches Shell Size C Conduit Size L Max. Q Max. 10SL .898 14S 1.150 16S 16 18 20 22 24 28 Wide Variety of Sizes Consult Amphenol, Sidney, NY for further information 32 Dependent on Conduit and Shell Combination Consult Amphenol, Sidney, NY for further information 1.299 1.299 1.437 1.571 1.697 1.835 2.102 2.366 36 2.610 40 2.850 Millimeters Shell Size C Conduit Size L Max. Q Max. 10SL 22.81 14S 29.21 16S 16 18 20 22 24 28 Wide Variety of Sizes Consult Amphenol, Sidney, NY for further information 32 Dependent on Conduit and Shell Combination Consult Amphenol, Sidney, NY for further information 32.99 32.99 36.50 39.90 43.10 46.61 53.39 60.10 36 66.29 40 72.39 All dimensions for reference only. 61 GT06PG straight plug * * * Long adapter with internal PG thread With wire sealing grommet Environment proof PG THREAD L Q Inches Shell Size PG* Thread L Ref. Q Max. 10SL 7 2.873 .898 14S 9 2.904 1.150 16S 11 2.904 1.299 16 11 3.291 1.299 18 13.5 3.406 1.437 20 16 3.391 1.571 22 21 3.395 1.697 24 21 3.470 1.835 28 29 3.604 2.102 32 36 3.751 2.366 36 42 3.795 2.610 40 48 3.795 2.850 Millimeters Shell Size PG* Thread L Ref. Q Max. 10SL 7 73.0 22.8 14S 9 73.8 29.2 16S 11 73.8 32.0 16 11 83.6 32.0 18 13.5 86.5 36.5 20 16 86.1 39.9 22 21 86.2 43.1 24 21 88.1 46.6 28 29 91.5 53.4 32 36 95.3 60.1 36 42 96.4 66.3 40 48 96.4 72.5 All dimensions for reference only. Additional shell size/PG thread combinations available 62 GT06PP/064PP panel plug GT064PP * Square flange mounting with four through holes * Environment proof with proper panel sealing gasket (see page 79) * Includes a heavy duty coupling nut GT06PP * Square flange mounting with four through holes * Environment proof with proper panel sealing gasket (see page 79) GT06PP GT064PP S S R R P T S S Q R P T Q1 R L L Inches Shell Size L Approx. 10SL 1.087 .898 .953 .110 .717 1.000 T + .004 - .000 .126 14S 1.091 1.150 1.208 .126 .906 1.181 .126 16S 1.091 1.260 1.319 .126 .969 1.280 .126 16 1.469 1.260 1.319 .126 .969 1.280 .126 18 1.500 1.437 1.510 .157 1.063 1.378 .126 20 1.500 1.571 1.660 .157 1.157 1.496 .126 22 1.500 1.697 1.770 .157 1.252 1.614 .126 24 1.598 1.835 1.910 .157 1.374 1.752 .146 28 1.626 2.102 2.085 .157 1.563 2.000 .146 32 1.764 2.366 2.440 .157 1.752 2.244 .169 36 1.764 2.610 2.660 .157 1.937 2.500 .169 40 1.764 2.850 2.910 .157 2.185 2.752 .169 L Approx. Q Max. Q1 Max. P 0.2 R 0.1 S 0.3 Q Max. Q1 Max. P .008 R .004 S .012 10SL 27.6 22.8 24.2 2.8 18.2 25.4 T + 0.1 - 0.0 3.2 14S 27.7 29.2 30.6 3.2 23.0 30.0 3.2 16S 27.7 32.0 33.5 3.2 24.6 32.5 3.2 16 37.3 32.0 33.5 3.2 24.6 32.5 3.2 18 38.1 36.5 38.3 4.0 27.0 35.0 3.2 20 38.1 39.9 42.1 4.0 29.4 38.0 3.2 22 38.1 43.1 44.9 4.0 31.8 41.0 3.2 24 40.6 46.6 48.5 4.0 34.9 44.5 3.7 28 41.3 53.4 52.9 4.0 39.7 50.8 3.7 32 44.8 60.1 61.9 4.0 44.5 57.0 4.3 36 44.8 66.3 67.5 4.0 49.2 63.5 4.3 40 44.8 72.4 73.9 4.0 55.5 69.9 4.3 Shell Size All dimensions for reference only. 63 GT06R straight plug * * * With a wire sealing grommet Includes a backshell for conduit termination Environment proof B F K Q L Inches Shell Size B Thread Class 2A F Min. K Min. L Max. Q Max. 10SL .6250-24UNEF .409 .374 1.969 .898 14S .7500-20UNEF .520 .374 1.969 1.150 16S .8750-20UNEF .638 .374 1.969 1.260 16 .8750-20UNEF .638 .374 2.362 1.260 18 1.0000-20UNEF .756 .374 2.362 1.437 20 1.1875-18UNEF .867 .374 2.362 1.571 22 1.1875-18UNEF .965 .374 2.362 1.697 24 1.4375-18UNEF 1.094 .374 2.560 1.835 28 1.4375-18UNEF 1.228 .374 2.560 2.102 32 1.7500-18UNS 1.488 .433 2.560 2.366 36 2.0000-18UNS 1.780 .465 3.150 2.610 40 2.2500-16UN 2.016 .465 3.150 2.850 Millimeters Shell Size F Min. K Min. L Max. Q Max. 10SL 10.4 9.5 50 22.8 14S 13.2 9.5 50 29.2 16S 16.2 9.5 50 32.0 16 16.2 9.5 60 32.0 18 19.2 9.5 60 36.5 20 22.0 9.5 60 39.9 22 24.5 9.5 60 43.1 24 27.8 9.5 65 46.6 28 31.2 9.5 65 53.4 32 37.8 11.0 65 60.1 36 45.2 11.8 80 66.3 40 51.2 11.8 80 72.4 All dimensions for reference only. 64 GT06RV straight plug * * * With a wire sealing grommet For use with individual wires Environment proof KK Q L Inches Shell Size L Max. Q Max. KK Max. 10SL 1.417 .898 .787 14S 1.437 1.150 .945 16S 1.437 1.260 1.024 16 1.929 1.260 1.024 18 1.929 1.437 1.161 20 1.969 1.571 1.299 22 1.969 1.697 1.417 24 2.008 1.835 1.543 28 2.008 2.102 1.811 32 2.087 2.366 2.028 36 2.106 2.610 2.283 40 2.126 2.850 2.539 Millimeters Shell Size L Max. Q Max. KK Max. 10SL 36.0 22.8 20.0 14S 36.5 29.2 24.0 16S 36.5 32.0 26.0 16 49.0 32.0 26.0 18 49.0 36.5 29.5 20 50.0 39.9 33.0 22 50.0 43.1 36.0 24 51.0 46.6 40.0 28 51.0 53.4 46.0 32 53.0 60.1 51.5 36 53.5 66.3 58.0 40 54.0 72.4 64.5 All dimensions for reference only. 65 GT06SB straight plug * * * For termination of shielded braid and heatshrink tube or boot. With individual wire sealing grommet Environment proof .138 REF F C E R D Q L Inches Shell Size C Min. D Max. E Max. F Ref. L Ref. Q Max. R Max. 10SL .303 .641 .775 .625 14S .417 .786 .873 .750 2.034 .898 .786 2.049 1.150 16S .531 .905 1.025 .875 2.049 .944 1.299 1.023 16 .531 .905 1.025 .875 2.505 1.299 1.023 18 .637 .965 1.147 1.000 2.552 1.437 1.160 20 .736 1.122 1.305 1.125 2.552 1.571 1.296 22 .819 1.196 1.373 1.250 2.418 1.697 1.416 24 .981 1.364 1.521 1.375 2.632 1.835 1.562 28 1.067 1.476 1.657 1.500 2.566 2.102 1.806 32 1.311 1.732 1.927 1.750 2.628 2.366 2.027 36 1.631 2.007 2.207 2.062 2.676 2.610 2.281 40 1.882 2.283 2.486 2.312 2.628 2.850 2.538 Millimeters Shell Size C Min. D Max. E Max. F Ref. L Ref. Q Max. R Max. 10SL 7.7 16.3 19.7 15.9 51.7 22.8 20.0 14S 10.6 20.0 22.2 19.1 52.0 29.2 24.0 16S 13.5 23.0 26.0 22.2 52.0 32.0 26.0 16 13.5 23.0 26.0 22.2 63.6 32.0 26.0 18 16.2 24.5 29.1 25.4 64.8 36.5 29.5 20 18.7 28.5 33.1 28.6 64.8 39.9 32.9 22 20.8 30.4 34.9 31.8 61.4 43.1 36.0 24 24.9 34.6 38.6 34.9 66.8 46.6 39.7 28 27.1 37.5 42.5 38.1 65.2 53.4 45.9 32 33.3 44.0 48.9 44.5 66.8 60.1 51.5 36 41.4 51.0 56.1 52.4 68.0 66.3 57.9 40 47.8 58.0 63.1 58.7 66.8 72.5 64.5 All dimensions for reference only. 66 GT06SBT straight plug * * * For termination of shielded braid and heatshrink tube or boot With wire sealing grommet Environment proof .138 REF C F E R D Q L Inches Shell Size C Min. D Max. E Max. F Ref. 10SL .303 .641 .775 .437 14S .417 .768 .873 .563 16S .531 .905 1.025 .626 16 .531 .905 1.025 18 .637 .965 1.147 20 .736 1.122 22 .819 24 .981 28 L Ref. Q Max. R Max. 2.401 .898 .786 2.520 1.150 .944 2.756 1.299 1.023 .626 3.150 1.299 1.023 .752 3.150 1.437 1.160 1.305 .878 3.150 1.571 1.296 1.196 1.373 1.000 3.150 1.697 1.416 1.364 1.521 1.126 3.150 1.835 1.562 1.067 1.476 1.657 1.252 3.150 2.102 1.806 32 1.311 1.732 1.927 1.252 3.150 2.366 2.027 36 1.631 2.007 2.207 1.752 3.350 2.610 2.281 40 1.882 2.283 2.486 2.000 3.350 2.850 2.538 Millimeters Shell Size C Min. D Max. E Max. F Ref. L Ref. Q Max. R Max. 10SL 7.7 16.3 19.7 11.1 61.0 22.8 20.0 14S 10.6 20.0 22.2 14.3 64.0 29.2 24.0 16S 13.5 23.0 26.0 15.9 71.0 32.0 26.0 16 13.5 23.0 26.0 15.9 80.0 32.0 26.0 18 16.2 24.5 29.1 19.1 80.0 36.5 29.5 20 18.7 28.5 33.1 22.3 80.0 39.9 32.9 22 20.8 30.4 34.9 25.4 80.0 43.1 36.0 24 24.9 34.6 38.6 28.6 80.0 46.6 39.7 28 27.1 37.5 42.5 31.8 80.0 53.4 45.9 32 33.3 44.0 48.9 31.8 80.0 60.1 51.5 36 41.4 51.0 56.1 44.5 85.1 66.3 57.9 40 47.8 58.0 63.1 50.8 85.1 72.5 64.5 All dimensions for reference only. 67 GT065SL(*) straight plug * * * Includes a long heavy duty coupling nut Includes a liquid tight strain relief to grip and seal jacketed cable Environment proof Cable Range* Q L Inches Cable Range Shell Size L Ref. Q Max. (1)* (2)* 10SL 3.516 1.007 .11-.26 .07-.12 14S 3.628 1.259 .15-.32 .07-.24 16S 3.808 1.410 .19-.39 .11-.28 16 4.355 1.410 .19-.39 .11-.28 18 4.249 1.547 .23-.47 .19-.35 20 4.255 1.681 .39-.56 .27-.47 22 4.329 1.847 .51-.71 .35-.63 24 4.816 1.965 .51-.71 .35-.63 28 4.817 2.222 .70-.98 .51-.79 32 4.817 2.482 .86-1.26 .78-1.02 36 5.048 2.721 1.26-1.50 .98-1.22 40 4.978 2.953 1.45-1.75 1.14-1.38 Millimeters Cable Range Shell Size L Ref. Q Max. (1)* (2)* 10SL 89.3 25.5 2.7-6.6 1.7-3.0 14S 92.1 31.9 3.8-8.1 1.7-6.0 16S 96.7 35.8 4.8-9.9 2.7-7.1 16 110.6 35.8 4.8-9.9 2.7-7.1 18 107.9 39.2 5.8-11.9 4.8-8.8 20 108.0 42.6 9.9-14.2 6.8-11.9 22 109.9 46.9 12.9-18.0 8.8-16.0 24 122.3 49.9 12.9-18.0 8.8-16.0 28 122.3 56.4 17.7-24.8 12.9-20.0 32 122.3 63.0 21.8-32.0 19.8-25.9 36 128.2 69.1 32.0-38.1 24.8-30.9 40 126.4 75.0 36.8-44.4 28.9-35.05 All dimensions for reference only. * Add suffix 1 or 2 for desired cable range. 68 GT07R jam nut receptacle * * * For rear panel single hole mounting Panel seal O-ring included Environment proof M S J G P G S N B O-Ring R Inches Shell Size B Thread Class 2A J Wall Thickness G .012 Min. Max. M .012 N + .000 - .006 P .007 R .016 S .012 1.252 10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626 16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748 16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748 18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.875 20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000 22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.134 24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252 28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500 32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748 36 2.5000-16 UN 1.059 .094 .327 1.386 2.346 .220 2.812 3.000 40 2.7500-16 UN 1.165 .094 .327 1.386 2.579 .220 2.953 3.248 Millimeters J Wall Thickness Max. M 0.3 N + 0.00 - 0.15 P 0.2 R 0.4 S 0.3 2.4 5.2 24.5 18.2 4.0 27 31.8 2.4 7.5 26.8 24.6 4.8 33 41.3 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4 16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4 18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6 20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8 22 20.2 2.4 9.1 33.7 37.4 4.8 51 54.2 24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2 28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5 32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8 36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2 40 29.6 2.4 8.3 35.2 65.5 5.6 75 82.5 Shell Size G 0.3 Min. 10SL 11.2 14S 14.6 16S All dimensions for reference only. 69 GT070 jam nut receptacle * * * For rear panel single hole mounting Threaded rear for accessories Environment proof L M S J G P G S N BB B O-Ring R Inches Shell Size B Thread Class 2A G .012 J Wall Thickness M .012 N + .000 - .006 P .007 R .016 S .012 BB Thread Class 2A Min. Max. L .010 10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF 16S 1.2500-18 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF 16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF 18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.875 1.0000-20 UNEF 20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF 22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.134 1.2500-18 UNEF 24 1.7500-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF 28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF 32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN 36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN 40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 2.953 3.248 2.3125-16 UN .6250-24 UNEF Millimeters J Wall Thickness Max. L 0.3 M 0.3 N + 0.00 - 0.15 P 0.2 R 0.4 S 0.3 2.4 5.2 36.2 24.5 18.2 4.0 27 31.8 2.4 7.5 38.9 26.8 24.6 4.8 33 41.3 15.7 2.4 7.5 38.9 26.8 27.4 4.8 38 44.4 16 15.7 2.4 7.5 48.5 32.1 27.4 4.8 38 44.4 18 16.8 2.4 9.0 49.3 33.7 30.8 4.8 40 47.6 20 18.0 2.4 9.1 49.3 33.7 34.2 4.8 44 50.8 22 20.2 2.4 9.1 49.3 33.7 37.4 4.8 51 54.2 24 20.2 2.4 9.1 49.6 33.7 40.9 4.8 51 57.2 28 22.5 2.4 10.0 51.9 35.2 46.7 5.6 56 63.5 32 24.7 2.4 10.0 51.9 35.2 53.4 5.6 62 69.8 36 26.9 2.4 8.3 51.9 35.2 59.6 5.6 71 76.2 40 29.6 2.4 8.3 51.9 35.2 65.5 5.6 75 82.5 Shell Size G 0.3 Min. 10SL 11.2 14S 14.6 16S All dimensions for reference only. 70 GT08A 90 angle plug * * * Without a wire sealing grommet or clamp Non-environment proof If a cable clamp is required, see pages 82 and 84 Q L K J B F Inches Shell Size B Thread Class 2A F Max. J Min. K Max. L Max. Q Max. 10SL .6250-24UNEF .337 .370 1.181 1.772 .898 14S .7500-20UNEF .462 .370 1.181 1.850 1.150 16S .8750-20UNEF .587 .370 1.181 1.890 1.299 16 .8750-20UNEF .587 .370 1.181 2.244 1.299 18 1.0000-20UNEF .685 .370 1.378 2.283 1.437 20 1.1875-18UNEF .810 .370 1.378 2.402 1.571 22 1.1875-18UNEF .915 .370 1.378 2.402 1.697 24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835 28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102 32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366 36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610 40 2.2500-16UN 1.923 .496 2.165 3.071 2.850 Millimeters Shell Size F Max. J Min. K Max. L Max. Q Max. 10SL 8.5 9.4 30 45 22.8 14S 11.7 9.4 30 47 29.2 16S 14.9 9.4 30 48 33.0 16 14.9 9.4 30 57 33.0 18 17.4 9.4 35 58 36.5 20 20.5 9.4 35 61 39.9 22 23.2 9.4 35 61 43.1 24 26.0 9.4 40 66 46.6 28 28.9 9.4 40 66 53.4 32 36.7 11.0 45 72 60.1 36 42.8 12.6 50 75 66.3 40 48.8 12.6 55 78 72.4 All dimensions for reference only. 71 GT08AF/08F 90 angle plug GT08F * With a wire sealing grommet and cable clamp * For use with individual wires * Environment proof GT08AF * With a cable clamp * Wire sealing grommet not included * Non-environment proof L Q K LL KK Z Inches Shell Size K Max. L Max. Q Max. Z Max. KK Max. LL Max. 10SL 1.654 1.772 .898 .220 .894 3.937 14S 1.654 1.850 1.150 .312 1.083 3.937 16S 1.772 1.890 1.299 .437 1.181 3.937 16 1.772 2.244 1.299 .437 1.181 3.937 18 2.087 2.283 1.437 .562 1.299 3.937 20 2.087 2.402 1.571 .625 1.476 3.937 22 2.087 2.402 1.697 .625 1.476 3.937 24 2.283 2.598 1.835 .750 1.705 3.937 28 2.283 2.598 2.102 .750 1.705 3.937 32 2.598 2.835 2.366 .937 2.061 4.331 36 2.717 2.953 2.610 1.250 2.283 4.331 40 3.740 3.071 2.850 1.375 2.579 5.512 Millimeters Shell Size K Max. L Max. Q Max. Z Max. KK Max. LL Max. 100 10SL 42 45 22.8 5.58 22.7 14S 42 47 29.2 7.92 27.5 100 16S 45 48 33.0 11.09 30.0 100 16 45 57 33.0 11.09 30.0 100 18 53 58 36.5 14.27 33.0 100 20 53 61 39.9 15.87 37.5 100 22 53 61 43.1 15.87 37.5 100 24 58 66 46.6 19.05 43.3 100 28 58 66 53.4 19.05 43.3 100 32 66 72 60.1 23.79 51.7 110 36 69 75 66.3 31.75 58.0 110 40 95 78 72.4 34.92 65.5 140 All dimensions for reference only. 72 GT08CFGG 90 angle plug * * * * Rubber covered coupling nut provides superior gripping surface and seals beyond ramps Includes clamp to grip and seal jacketed cable Mates with GT020RFSM (see page 44) Environment proof Q L S K Z KK OPEN CLOSED Inches Z Shell Size* K Max. L Max. Q Dia. S Dia. Open Closed KK .008 10SL 2.402 1.929 1.319 1.122 .312 .094 .890 18 2.677 2.520 1.929 1.713 .625 .378 1.220 20 2.677 2.638 2.028 1.811 .748 .445 1.469 22 2.677 2.638 2.205 1.988 .748 .445 1.469 24 2.992 2.874 2.362 2.126 .937 .610 1.654 28 2.992 2.874 2.638 2.402 .937 .610 1.654 32 3.425 3.071 2.992 2.661 1.250 .921 2.126 36 3.858 3.189 3.240 2.925 1.378 .921 2.248 40 4.055 3.307 3.465 3.150 1.624 1.177 2.500 Millimeters Shell Size* K Max. L Max. Q Dia. S Dia. 10SL 61 49 33.5 18 68 64 49.0 20 68 67 22 68 24 Z Open Closed KK 0.2 28.5 7.93 2.38 22.6 43.5 15.87 9.60 31.0 51.5 46.0 19.00 11.30 37.3 67 56.0 50.5 19.00 11.30 37.3 76 73 60.0 54.0 23.80 15.50 42.0 28 76 73 67.0 61.0 23.80 15.50 42.0 32 87 78 76.0 67.6 31.75 23.40 54.0 36 98 81 82.3 74.3 35.00 23.40 57.1 40 103 84 88.0 80.0 41.25 29.90 63.5 All dimensions for reference only. * 14s, 16s and 16 shell sizes are available upon request. 73 GT08LT 90 angle plug * * * For termination of metallic core conduit With individual wire sealing grommet Environment proof L Q K C DIA. OF CONDUIT Inches Shell Size K Max. L Max. Q Max. 10SL 1.772 .898 14S 1.850 1.150 16S 1.890 1.299 16 2.244 1.299 Dependent on Conduit and Shell Combination 2.283 1.437 2.402 1.571 Consult Amphenol, Sidney, NY for further information 2.402 1.697 2.598 1.835 28 2.598 2.102 32 2.835 2.366 36 2.953 2.610 40 3.071 2.850 18 20 22 24 Millimeters Shell Size K Max. L Max. Q Max. 10SL 45.01 22.81 14S 46.99 29.21 16S 48.01 32.99 16 57.00 32.99 Dependent on Conduit and Shell Combination 57.99 36.50 61.01 39.90 Consult Amphenol, Sidney, NY for further information 61.01 43.10 65.99 46.61 28 65.99 53.39 32 72.01 60.10 36 75.01 66.29 40 78.00 72.39 18 20 22 24 All dimensions for reference only. 74 Inches C Conduit Size 3/8 1/2 3/4 1 1-1/4 1-1/2 2 Millimeters C Conduit Size 9.53 12.70 19.05 25.40 31.75 38.10 50.80 GT08PFC 90 angle plug * * * For termination of plastic flexible corrugated conduit With individual wire sealing grommet Environment proof L Q K C DIA. OF CONDUIT Inches Shell Size C Conduit Size K Max. L Max. Q Max. 10SL 1.772 .898 14S 1.850 1.150 1.890 1.299 2.244 1.299 2.283 1.437 2.402 1.571 2.402 1.697 2.598 1.835 2.598 2.102 2.835 2.366 36 2.953 2.610 40 3.071 2.850 16S 16 18 20 22 24 28 Wide Variety of Sizes Consult Amphenol, Sidney, NY for further information 32 Dependent on Conduit and Shell Combination Consult Amphenol, Sidney, NY for further information Millimeters Shell Size C Conduit Size K Max. L Max. Q Max. 10SL 45.01 22.81 14S 46.99 29.21 48.01 32.99 57.00 32.99 57.99 36.50 61.01 39.90 61.01 43.10 65.99 46.61 65.99 53.39 72.01 60.10 36 75.01 66.29 40 78.00 72.39 16S 16 18 20 22 24 28 Wide Variety of Sizes Consult Amphenol, Sidney, NY for further information 32 Dependent on Conduit and Shell Combination Consult Amphenol, Sidney, NY for further information All dimensions for reference only. 75 GT08R 90 angle plug * * * With a wire sealing grommet for conduit termination For use with individual wires Environment proof Q L K J B F Inches Shell Size B Thread Class 2A F Max. J Min. K Max. L Max. Q Max. 10SL .6250-24UNEF .337 .370 1.181 1.772 .898 14S .7500-20UNEF .462 .370 1.181 1.850 1.150 16S .8750-20UNEF .587 .370 1.181 1.890 1.299 16 .8750-20UNEF .587 .370 1.181 2.244 1.299 18 1.0000-20UNEF .685 .370 1.378 2.283 1.437 20 1.1875-18UNEF .810 .370 1.378 2.402 1.571 22 1.1875-18UNEF .915 .370 1.378 2.402 1.697 24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835 28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102 32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366 36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610 40 2.2500-16UN 1.923 .496 2.165 3.071 2.850 Millimeters Shell Size F Max. J Min. K Max. L Max. Q Max. 10SL 8.5 9.4 30 45 22.8 14S 11.7 9.4 30 47 29.2 16S 14.9 9.4 30 48 33.0 16 14.9 9.4 30 57 33.0 18 17.4 9.4 35 58 36.5 20 20.5 9.4 35 61 39.9 22 23.2 9.4 35 61 43.1 24 26.0 9.4 40 66 46.6 28 28.9 9.4 40 66 53.4 32 36.7 11.0 45 72 60.1 36 42.8 12.6 50 75 66.3 40 48.8 12.6 55 78 72.4 All dimensions for reference only. 76 GT05 dummy receptacle * * * Square flange Four through mounting holes Stows cable plugs when not in use M P T R S N R S Inches M + .016 - .000 N + .000 - .006 P .008 R .004 S .012 T + .004 - .000 10SL .559 .717 .110 .717 1.000 .126 14S .559 .969 .126 .906 1.181 .126 16S .559 1.079 .126 .969 1.280 .126 16 .748 1.079 .126 .969 1.280 .126 18 .748 1.213 .157 1.063 1.378 .126 20 .748 1.346 .157 1.157 1.496 .126 22 .748 1.472 .157 1.252 1.614 .126 24 .811 1.610 .157 1.374 1.752 .146 28 .811 1.839 .157 1.563 2.000 .146 32 .874 2.102 .157 1.752 2.244 .169 36 .874 2.346 .157 1.937 2.500 .169 40 .874 2.579 .157 2.185 2.752 .169 Shell Size Millimeters Shell Size M + 0.4 - 0.0 N + 0.00 - 0.15 P 0.2 R 0.1 S 0.3 T + 0.1 - 0.0 10SL 14.2 18.2 2.8 18.2 25.4 3.2 14S 14.2 24.6 3.2 23.0 30.0 3.2 16S 14.2 27.4 3.2 24.6 32.5 3.2 16 19.0 27.4 3.2 24.6 32.5 3.2 18 19.0 30.8 4.0 27.0 35.0 3.2 20 19.0 34.2 4.0 29.4 38.0 3.2 22 19.0 37.4 4.0 31.8 41.0 3.2 24 20.6 40.9 4.0 34.9 44.5 3.7 28 20.6 46.7 4.0 39.7 50.8 3.7 32 22.2 53.4 4.0 44.5 57.0 4.3 36 22.2 59.6 4.0 49.2 63.5 4.3 65.5 4.0 55.5 69.9 4.3 40 22.2 All dimensions for reference only. 77 GTTB thru-bulkhead receptacles * * Accepts mating plug on both sides Four through mounting holes P M T R N S N R L S Inches Shell Size L Max. 10SL 1.488 M + .016 - .000 .717 N + .000 - .006 .717 .110 .717 1.000 14S 1.488 .717 .969 .126 .906 1.181 .126 16S 1.488 .717 1.079 .126 .969 1.280 .126 16 2.049 .846 1.079 .126 .969 1.280 .126 18 2.049 .907 1.213 .157 1.063 1.378 .126 20 2.049 .907 1.346 .157 1.157 1.496 .126 22 2.049 .907 1.472 .157 1.252 1.614 .126 24 2.049 .907 1.610 .157 1.374 1.752 .146 28 2.049 .947 1.839 .157 1.563 2.000 .146 32 2.049 .947 2.102 .157 1.752 2.244 .169 36 2.049 .947 2.346 .157 1.937 2.500 .169 40 2.049 .947 2.579 .157 2.185 2.752 .169 Shell Size L Max. R 0.1 S 0.3 37.7 N + 0.00 - 0.15 18.2 P 0.2 10SL M + 0.4 - 0.0 18.2 2.8 18.2 25.4 T + .004 - .000 3.2 14S 37.7 18.2 24.6 3.2 23.0 30.0 3.2 16S 37.7 18.2 27.4 3.2 24.6 32.5 3.2 16 52.0 21.5 27.4 3.2 24.6 32.5 3.2 18 52.0 23.0 30.8 4.0 27.0 35.0 3.2 20 52.0 23.0 34.2 4.0 29.4 38.0 3.2 22 52.0 23.0 37.4 4.0 31.8 41.0 3.2 24 52.0 23.0 40.9 4.0 34.9 44.5 3.7 28 52.0 24.0 46.7 4.0 39.7 50.8 3.7 32 52.0 24.0 53.4 4.0 44.5 57.0 4.3 36 52.0 24.0 59.6 4.0 49.2 63.5 4.3 40 52.0 24.0 65.5 4.0 55.5 69.9 4.3 P .008 R .004 S .012 T + .004 - .000 .126 Millimeters All dimensions for reference only. 78 GT Connectors - accessories 10-40450, 10-36675, 10-580649 sealing gaskets PLAIN FLAT GASKET The Amphenol(R) plain flat gasket of synthetic rubber material is provided to take complete advantage of waterproof and pressure sealing features. It is for use with the flange mounted receptacle. .031 .010 .08 0.3 mm C A .020 .004 0.5 0.1 mm SHIELDING A C LOW TEMPERATURE GASKET This gasket is provided for applications where the major requirement is resistance to the injurious effects of extremely low temperature. Even at temperatures as low as -67F this gasket retains its resiliency and will seal a pressure differential of 30 psi. .031 .010 0.8 0.3 mm LOW TEMPERATURE D 4 HOLES B SHIELDING GASKET This flat gasket is provided to give the maximum in connector performance. Its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sensitivity and low signal strength while retaining the sealing characteristics of the plain gasket. This gasket is for use with the flange mounting receptacle. Additional versions of gaskets are available including low smoke zero halogen, and also high temperature and conductive types. Consult Amphenol lndustrial Operations, Sidney NY, for further information. Installation Dimensions Rear Panel Version B + .016 - .000 A .010 Front Panel Versions B + .016 - .000 10SL .719 .625 .724 1.000 .172 14S .906 .875 .976 1.188 .172 MS Shell Size Order Data for Front Panel Mount Gaskets C + .016 - .000 D .010 16S .969 1.000 1.087 1.281 .172 16 .969 1.000 1.087 1.281 .172 18 20 1.063 1.156 1.125 1.250 1.220 1.354 1.375 1.500 .203 .203 22 1.250 1.375 1.480 1.625 .203 24 1.375 1.500 1.618 1.750 .203 28 32 1.563 1.750 1.750 2.000 1.846 2.110 2.000 2.250 .203 .219 36 1.938 2.188 2.354 2.500 .219 40 2.188 2.438 2.587 2.750 .219 MS Shell Size A 0.2 Rear Panel Version B + 0.4 - 0.0 Front Panel Shielding Version C + 0.4 - 0.0 10-40450-10S 10-36675-10 LS-40450-10 10-40450-14S 10-36675-14 LS-40450-14 10-40450-16 10-40450-16S 10-36675-16 LS-40450-16 10-40450-18 10-40450-18S 10-36675-18 LS-40450-18 10-40450-20 10-40450-20S 10-36675-20 LS-40450-20 10-40450-22 10-40450-22S 10-36675-22 LS-40450-22 10-40450-24 10-40450-24S 10-36675-24 LS-40450-24 10-40450-28 10-40450-28S 10-36675-28 LS-40450-26 10-40450-32 10-40450-32S 10-36675-32 LS-40450-32 10-40450-36 10-40450-36S 10-36675-36 LS-40450-36 10-40450-40 10-40450-40S 10-36675-40 LS-40450-40 D 0.2 Rear Panel Low Smoke ZH Version 10-580649-11 LS-580649-11 LS-580649-14 10SL 18.2 15.9 18.4 25.4 4.36 10-580649-14 14S 23.0 22.2 24.8 30.2 4.36 10-580649-16 LS-580649-16 16S 24.6 25.4 27.6 32.5 4.36 10-580649-18 LS-580649-18 16 24.6 25.4 27.6 32.5 4.36 10-580649-20 LS-580649-20 18 27.0 28.57 31.0 35.0 5.15 10-580649-22 LS-580649-22 LS-580649-24 20 29.4 31.75 34.4 38.1 5.15 10-580649-24 22 31.8 34.9 37.6 41.2 5.15 10-580649-26 LS-580649-26 24 34.9 38.1 41.1 44.5 5.15 10-580649-32 LS-580649-32 28 39.7 44.45 46.9 50.8 5.15 10-580649-36 LS-580649-36 10-580649-40 LS-580649-40 44.5 50.8 53.6 57.2 5.56 36 49.2 55.57 59.8 63.5 5.56 40 55.6 61.92 65.7 69.9 5.56 Front Panel Low Smoke ZH Version 10-40450-14 Rear Panel Plain Version 32 Front Panel Low Temperature Version 10-40450-10 Order Data for Rear Panel Mount Gaskets Installation Dimensions Front Panel Versions B + 0.4 - 0.0 Front Panel Plain Version 79 GT Connectors - accessories receptacle protection caps * * * Protective metal caps which seal the front of receptacles Includes a chain for retention of the cap at the required location For receptacles: GT00, 01, 02, 020, 030, 070 * 10-580902-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580902-113. LL Inches Black anodize L Max. 11 .173 14 .173 16 Shell Size D Finish D + .020 - .000 Suffix N Max. LL Approx. .700 .905 5.000 .700 1.181 5.000 .173 .700 1.280 5.000 17 .173 .900 1.280 5.000 18 .173 .900 1.457 5.000 20 .173 .900 1.594 5.000 22 .173 .900 1.713 5.000 24 .173 .900 1.850 5.000 28 .220 .900 2.126 7.480 32 .261 .900 2.382 7.480 36 .261 .900 2.638 7.480 40 .261 .900 2.874 7.480 Shell Size D + 0.5 - 0.0 L Max. N Max. LL Approx. 11 4.4 17.8 23.0 127 14 4.4 17.8 30.0 127 16 4.4 17.8 32.5 127 17 4.4 22.9 32.5 127 18 4.4 22.9 37.0 127 20 4.4 22.9 40.5 127 22 4.4 22.9 43.5 127 24 4.4 22.9 47.0 127 28 5.6 22.9 54.0 190 32 5.6 22.9 60.5 190 36 5.6 22.9 67.0 175 40 5.6 22.9 73.0 190 -XXZ Olive drab cadmium plate -XX3 Olive drab cadmium nickel base -XX9 Electroless nickel -XXG Green zinc cobalt -XXU Black zinc cobalt -XXY Millimeters All dimensions for reference only. 80 GT Connectors - accessories plug protection caps * * * Protective metal caps which seal the front of plugs Includes a chain for retention of the cap at the required location For plugs: GT06, 08 * 10-580903-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580903-113. LL Inches D Finish Black anodize D + .020 - .000 L Max. 11 .157 14 .157 16 Shell Size Suffix N Max. LL Approx. .945 .807 5.000 .945 1.059 5.000 .157 .945 1.169 5.000 17 .157 .945 1.169 5.000 18 .157 .945 1.303 5.000 20 .189 1.260 1.437 5.520 22 .189 1.260 1.563 5.520 24 .189 1.260 1.701 5.520 28 .220 1.260 1.929 7.480 32 .261 1.260 2.193 7.480 36 .261 1.260 2.437 7.480 40 .261 1.260 2.665 7.480 Shell Size D + 0.5 - 0.0 L Max. N Max. LL Approx. 11 4.0 24 20.5 127 14 4.0 24 26.9 127 16 4.0 24 29.7 127 17 4.0 24 29.7 127 18 4.0 24 33.1 127 20 4.8 32 36.5 140 22 4.8 32 39.7 140 24 4.8 32 43.2 140 28 4.8 32 49.0 190 32 5.6 32 55.7 190 36 5.6 32 61.9 190 40 5.6 32 67.7 190 -XXZ Olive drab cadmium plate -XX3 Olive drab cadmium nickel base -XX9 Electroless nickel -XXG Green zinc cobalt -XXU Black zinc cobalt -XXY Millimeters All dimensions for reference only. 81 GT Connectors - accessories MS3057-A style cable clamp * * Concentric cable clamps, insure strain relief and central location of the cable Can be used with bushing MS3420 G D Q E F V B Inches Part Number Used with Shell Size Used with Bushing V Thread Class 2B B D G F 97-3057-1004 10SL MS3420-4 .315 .395 .812 .866 .6250-24 UNEF 97-3057-1007 14S MS3420-6 .442 .395 .875 1.063 .7500-20 UNEF 97-3057-1008 16 - 16S MS3420-8 .568 .395 .945 1.145 .8750-20 UNEF 97-3057-1010 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 UNEF 97-3057-1012 20 - 22 MS3420-12 .758 .395 .945 1.475 1.1875-18 UNEF 97-3057-1016 24 - 28 MS3420-16 .948 .395 1.031 1.700 1.4375-18 UNEF 97-3057-1020 32 MS3420-20 1.256 .460 1.094 2.055 1.7500-18 UNS 97-3057-1024 36 MS3420-24 1.380 .520 1.157 2.265 2.0000-18 UNS 10-824810-028 40 MS3420-28 1.625 .520 1.685 2.683 2.2500-16 UN Millimeters Part Number Used with Shell Size Used with Bushing B D G F MS3420-4 8.0 10.0 20.6 22 97-3057-1004 10SL 97-3057-1007 14S MS3420-6 11.0 10.0 22.2 27 97-3057-1008 16 - 16S MS3420-8 14.4 10.0 24.0 29 97-3057-1010 18 MS3420-10 16.1 10.0 24.0 32 97-3057-1012 20 - 22 MS3420-12 19.2 10.0 24.0 37 97-3057-1016 24 - 28 MS3420-16 24.1 10.0 26.2 43 97-3057-1020 32 MS3420-20 31.9 11.7 27.8 52 97-3057-1024 36 MS3420-24 35.0 13.2 29.4 58 10-824810-028 40 MS3420-28 41.3 13.2 42.8 68 All dimensions for reference only. 82 GT Connectors - accessories MS3420 bushing * * Bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires Can be telescoped for smaller cable diameters A D 1.6mm .062 in. C B Inches Part Number Used with Cable Clamp A B C D MS3420-3 M85049/41-3A .130 .210 .379 2.875 MS3420-4 M85049/41-4A .220 .302 .505 2.750 MS3420-6 M85049/41-6A .312 .427 .619 2.625 MS3420-8 M85049/41-8A .437 .552 .744 2.500 MS3420-10 M85049/41-10A .562 .615 .889 2.375 MS3420-12 M85049/41-12A .625 .740 1.084 2.250 MS3420-16 M85049/41-16A .750 .927 1.314 2.125 MS3420-20 M85049/41-20A .937 1.240 1.598 2.000 MS3420-24 M85049/41-24A 1.250 1.365 1.847 1.875 MS3420-28 M85049/41-28A 1.375 1.614 2.085 1.750 Part Number Used with Cable Clamp A B C D MS3420-3 M85049/41-3A 3.30 5.3 9.60 73.0 MS3420-4 M85049/41-4A 5.58 7.7 12.80 69.8 MS3420-6 M85049/41-6A 7.92 10.8 15.70 66.8 MS3420-8 M85049/41-8A 11.09 14.0 18.90 63.5 MS3420-10 M85049/41-10A 14.27 15.6 22.58 60.3 MS3420-12 M85049/41-12A 15.87 18.8 27.50 57.1 MS3420-16 M85049/41-16A 19.05 23.5 33.40 53.9 MS3420-20 M85049/41-20A 23.79 31.5 40.60 50.8 MS3420-24 M85049/41-24A 31.75 34.7 46.90 47.6 MS3420-28 M85049/41-28A 34.92 41.0 52.90 44.4 Millimeters All dimensions for reference only. 83 GT Connectors - accessories MS3057-C style (10-350349) cable clamp * * * Waterproof clamp for jacketed cables Provides mechanical strain relief plus concentric clamping over a wide range of cable sizes A neoprene* gland seal ensures a waterproof seal on the cable jacket * Other materials available V G F A B E To reduce diameter B, use rubber brushing MS3420A Part Number 10-350349-123 Used with Shell Size 10SL A Thread Class 2B in inches V Thread Class 2A in inches .6250-24 UNEF Used with Bushing 6-32 UNC Bushing Opening Inches Busing Opening Millimeters Open Closed Open MS3420-4A .219 .010 5.56 Closed 0.25 .312 .219 .114 .020 7.93 5.56 2.89 0.50 10-350349-143 14S .7500-20 UNEF 6-32 UNC MS3420-6A MS3420-4A 10-350349-163 16 & 16S .8750-20 UNEF 6-32 UNC MS3420-8A MS3420-6A .437 .312 .220 .085 11.10 7.93 5.60 2.15 10-350349-183 18 1.0000-20 UNEF 6-32 UNC MS3420-10A MS3420-6A .437 .312 .197 .085 11.10 7.93 5.00 2.15 10-350349-203 20 & 22 1.1875-18 UNEF 8-32 UNC MS3420-12A MS3420-8A .541 .437 .270 .177 13.74 11.10 6.85 4.50 10-350349-243 24 & 28 1.4375-18 UNEF 8-32 UNC MS3420-16A MS3420-12A MS3420-8A .748 .541 .437 .429 .260 .186 19.00 13.74 11.10 10.90 6.60 4.72 10-350349-323 32 1.7500-18 UNS .250-20 UNC MS3420-20A MS3420-16A MS3420-12A .937 .748 .541 .620 .441 .273 23.80 19.00 13.74 15.74 11.20 6.93 10-350349-363 36 2.0000-18 UNS .250-20 UNC MS3420-24A MS3420-20A MS3420-16A 1.122 .937 .748 .681 .504 .358 28.50 23.80 19.00 17.30 12.80 9.10 10-350349-403 40 2.2500-16 UN .250-20 UNC MS3420-28A MS3420-20A MS3420-16A 1.250 .937 .748 .815 512 368 31.75 23.80 19.00 20.70 13.00 9.34 Inches B Part Number Used with Shell Size Open Closed E .016 F .008 G + .020 - .000 Millimeters Open B Closed E 0.4 F 0.2 G + 0.5 - 0.0 32.3 10-350349-123 10SL .312 .094 .748 .890 1.272 7.93 2.38 19.0 22.6 10-350349-143 14S .438 .230 .874 1.016 1.272 11.12 5.84 22.2 25.8 32.3 10-350349-163 16 & 16S .531 .315 1.000 1.106 1.272 13.48 8.00 25.4 28.1 32.3 10-350349-183 18 .625 .378 1.122 1.220 1.390 15.87 9.60 28.5 31.0 35.3 10-350349-203 20 & 22 .748 .445 1.311 1.469 1.406 19.00 11.30 33.3 37.3 35.7 10-350349-243 24 &28 .937 .610 1.559 1.654 1.516 23.80 15.50 39.6 42.0 38.5 10-350349-323 32 1.250 .921 1.874 2.126 1.764 31.75 23.40 47.6 54.0 44.8 10-350349-363 36 1.378 .921 2.122 2.248 2.031 35.00 23.40 53.9 57.1 51.6 10-350349-403 40 1.624 1.177 2.374 2.500 2.031 41.25 29.90 60.3 63.5 51.6 All dimensions for reference only. 84 GT - accessories rear mounting data, panel cut-out dimensions, sealing plugs, sealing ranges REAR MOUNTING DATA MAXIMUM PANEL THICKNESS GROMMET HOLE SEALING RANGES Sealing Range D MAX. Hole Size (mm) Inches 16 1.62 - 3.3 .064 - .130 12 2.89 - 4.31 .114 - .170 8 4.16 - 6.47 .164 - .255 4 6.9 - 9.3 .272 - .370 0 10.5 - 13.97 .415 - .550 Dimension D GT00/020 GT030 Size Inches (mm) Inches (mm) 10SL .146 3.70 .303 7.70 14S .146 3.70 .303 7.70 16S .146 3.70 .303 7.70 16 .145 3.70 .242 6.15 18 .145 3.70 .303 7.70 20 .145 3.70 .303 7.70 22 .145 3.70 .303 7.70 24 .207 5.25 .303 7.70 28 .207 5.25 .343 8.70 32 .241 6.10 .309 7.85 36 .241 6.10 .309 7.85 40 .237 6.02 .309 7.85 SEALING PLUG 10-405996-XX B DIA. C Sealing plugs are used to fill unused holes in multi-holed grommet configurations. A DIA. C DIA. Connector Styles +.030 .135 -.025 in. + 0.8 mm 3.4 - 0.6 45O Inches A Dia. .010 B .005 C .010 Blue .083 .133 .564** 14-12 Yellow .121 .171 .564** 8 10-8 Red .185 .315 .470 4 4-6 Blue .310 .415 .470 0 0-2 Yellow .440 .605 1.000 Wire Size 10-405996-16 16 20-16 10-405996-12 12 10-405996-8 10-405996-4 10-405996-0 Order No. Color Code B 0.1 C 0.2 2.1 3.4 14.3*** 3.1 4.3 14.3*** 4.7 8.0 11.9 7.9 10.5 11.9 11.2 15.4 25.4 *** 0.5 (mm) Shell Size A Dia. Hole Size 02, 020, 00, 030 Jam Nut 070 D Dia. E 7/8 .83 .906 13/16 1 1 1/8 .969 15/16 1 1/8 1 1/14 1.21 1.063 1 1/16 1 1/4 1 3/8 1.32 .126 1.157 1 3/16 1 3/8 1 1/2 1.45 .126 1.252 1 5/16 1 1/2 1 5/8 1.57 24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70 28 .146 1.563 1 11/16 1 7/8 2 1.95 32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20 36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45 40 .169 2.185 2 3/8 2 5/8 2 3/4 2.70 14S .126 16S/16 .126 18 .126 20 22 .717 C Dia. Jam Nut 070 1 3/4 .126 C Dia. Rear Mount 030 11/16 10SL B .004 Front Mount 02, 00, 020 1.08 All dimensions for reference only. Millimeters A Dia. 0.2 ** .020 (in.) E TYP. PANEL CUT-OUT DIMENSIONS A DIA. Contact Size D DIA. B TYP. 85 GT Connectors crimp contacts and application tools Machined from copper alloys and silver or gold plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all MS insert arrangements and are identified with an Amphenol(R) proprietary number. CRIMP CONTACTS CRIMP CONTACT DATA APPLICATION TOOLS PART NUMBER PIN CONTACT SILVER GOLD("D") SOCKET CONTACT SILVER GOLD("D") MATING SIZE WIRE WELL 10-40553 10-597160-15D 10-597109-161 10-597109-16D 10-606014-40 10-597160-40D 10-597109-401 10-597109-40D 10-606014-221 10-597160-19D 10-597109-191 10-597109-19D 10-606014-291 10-597160-34D 10-597109-341 10-597109-34D 10-606014-46 10-597160-46D 10-597109-461 10-597109-46D 20-24 10-40557 10-597160-16D 10-597109-171 10-597109-17D 16-18-20 10-606014-022 10-597160-22D 10-597109-221 10-597109-22D 10-606014-171 10-597160-17D 10-597109-141 10-597109-14D 10-606014-311 10-597160-33D 10-597109-331 10-597109-33D 20-22 10-606014-361 10-597160-36D 10-597109-361 10-597109-36D 20-24 10-606014-121 10-597160-12D 10-597109-131 10-597109-13D 12-14 10-606014-231 10-597160-23D 10-597109-231 10-597109-23D 8-10 10-606014-251 10-597160-26D 10-597109-261 10-597109-26D 10-606014-271 10-597160-27D 10-597109-271 10-597109-27D 10-606014-261 10-597160-24D 10-597109-241 10-597109-24D 18-20 10-606014-201 10-597160-20D 10-597109-201 10-597109-20D 20-22 10-40792 10-597160-8D 10-40793 10-597109-8D 8 10-606014-41 10-597160-41D 10-597109-411 10-597109-41D 10-606014-321 10-597160-28D 10-606015-321 10-597109-28D 10-606014-381 10-597160-38D 10-597109-381 10-597109-38D 10-40564 10-597160-4D 10-40565 10-597109-4D 4 10-606014-58 10-597160-58D 10-597109-581 10-597109-58D 6 10-606014-331 10-597160-35D 10-597109-351 10-597109-35D 10-606014-44 10-597160-44D 10-606015-441 10-597109-44D 10 10-581806-000 10-597160-1D 10-581808-000 10-597159-1D 0 10-606014-341 10-597160-29D 10-597109-291 10-597109-29D 10-606014-351 10-597160-30D 10-606015-351 10-597109-30D 10-597276-48 10-597276-48D 10-606015-48 10-597109-48D 2/0 2/0 10-606015-47 10-597109-47D 4/0 4/0 10-597276-47 10-597276-47D Crimp Tools Positioner/ Die Set Locator/ Color 16-18-20 12-14 16S 14-16 Red 20-22 12-14 16 12 8 14-16 Daniels AF8 or Equivalent TH29-1 or Equivalent 10-12 Pin - Blue Socket - Green Green 14-16-18 6 10-12 Pico 414DA-8N Pico Pin - 4025 Socket - 4026 Pico 414DA-4N Pico 4043 Pico 414DA-0N Pico Pin - 4042-1 Socket - 4042 Pico 514DA2/0N Pico Pin - 6490 Pico 514DA4/0N Socket - 6491 12-14 4 0 Pico 400BHD 8 0-2 4 See page 87 for further contact information applicable to both crimp and solder contacts. Additional contact variations including thermocouple and RADSOK power contacts are available; consult Amphenol, Sidney, NY for information. 86 Pico 500 GT Connectors solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Gold plated contacts are also available. (See how to order, pg. 88). Pin/ Socket Mating End Size Wire Barrel Size Allowable Wire Size 16 Short 16 16 18 20 22 13 10 7.5 5 16 Long 16 16 18 20 22 13 10 7.5 5 12 12 12 14 23 17 8 8 8 10 46 33 4 4 4 6 80 60 0 0 0 1 2 150 125 100 Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 10SL, 14S and 16S connectors require short contacts. Table I MIL-SPEC CONTACT ARRANGEMENT SERVICE RATING MS Service Rating Table II ALTITUDE VOLTAGE DERATING** CHART Recommended Operating Voltage* at Sea Level DC Effective Creepage Mechanical Spacing Distance AC (RMS) Nom. Nom. Inst. 250 200 1/16 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Test Current** Amps Nominal Distance Standard Sea Level Conditions Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) 550 400 325 260 800 600 450 360 2800 900 675 500 400 4500 3500 1000 750 550 440 5/16 5700 4500 1100 825 600 480 1 8500 7000 1300 975 700 560 Creepage Test Voltage AC (RMS) 1/16 1400 1000 1/8 2800 2000 1/8 3/16 3600 E 3/16 1/4 B 1/4 C 5/16 Airspace Inst. 1/32 A 1/16 D Pressure Altitude 70,000 Feet Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) MS Service Rating Pressure Altitude 50,000 Feet Minimum Flashover Voltage AC (RMS) Not corrected for changes in density due to variations in temperature ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 87 Amphenol (R) GT Connectors how to order, connector intermateability R Part Number System GT C 1 00 2 A 3 FF 4 36-5 5 P 6 W 7 (014) 8 1. Contact Style and Insert Material C = Crimp CN = Crimp with stainless steel S= Solder SN = Solder with stainless steel CY = Crimp with Viton SY = Solder with Viton CL = Crimp with low smoke/flame retardant inserts SL = Solder with low smoke/flame retardant inserts No designation required for Neoprene components 2. Shell Style 00 - Wall mount receptacle 01 - Inline receptacle 02 - Box mount receptacle 020 - Box mount receptacle with accessory threads 030 - Square flange receptacle - rear panel mount 05 - Dummy receptacle 06 - Straight plug 062 - Straight plug with deep serrated coupling nut* 064 - Panel mounted plug with heavy duty coupling nut 065 - Straight plug with long heavy duty coupling nut 07 - Jam nut receptacle - rear panel mount 070 - Jam nut receptacle with accessory threads 08 - 90 angle plug TB - Thru-bulkhead 3. Connector Class - For details, see pages 29-78 A - Adapter for accessory attachment, non-environmental AF - Adapter, clamp for individual wires, non-environmental CF - Adapter, jacketed cable clamp, environmental CFGG - Adapter, jacketed cable clamp, over molded coupling nut, environmental CFZ - Adapter, jacketed cable clamp, individual wire sealing grommet, environmental F - Adapter, clamp for individual wires, individual wire sealing grommet, environmental. G - Adapter for heat shrink tubing, individual wire sealing grommet, environmental G2 - Free turning adapter for heat shrink tubing, individual wire sealing grommet, environmental GTTB - Thru bulkhead receptacle, accepts mating plug on both sides LC - Long adapter, backshell with jacketed cable basket weave grip, with individual wire sealing grommet, environmental LCF - Long adapter, jacketed cable clamp, environmental LCFZ - Long adapter, jacketed cable clamp, individual wire sealing grommet, environmental LT - Adapter, backshell for terminating metallic core conduit PFC - Adapter, backshell for plastic corrugated conduit, individual wire sealing grommet, environmental PG - Long adapter with PG threads, individual wire sealing grommet, environmental PP - Panel mounted plug R - Adapter for accessory attachment, individual wire sealing grommet, environmental 4. 5. 6. 7. 8. - (02/03) No thread, no accessories, environmental with panel sealing gasket R - (020) No accessories, environmental with panel sealing gasket RFS - (02) No accessories, countersunk mounting holes for use with over molded coupling nut, environmental with panel sealing gasket RFSM - (020) No accessories, countersunk mounting holes for use with over molded coupling nut, environmental with panel sealing gasket RV - Adapter, individual wire sealing grommet, environmental SB - Adapter for termination of EMI/RFI shielded braid with heat shrink tubing or boot, individual wire sealing grommet, environmental SBT - Adapter for termination of EMI/RFI shielded braid with heat shrink tubing or boot, individual wire sealing grommet, environmental SL - Long adapter, jacketed cable liquid tight strain relief, environmental Designation for Mounting Hole - Receptacle Only FF - UN Threads FM - Metric Threads No designation for standard through hole mounting holes. Shell Size and Arrangement See pages 2-4 Contact Style P designates pin contacts S designates socket contacts Alternate Position W, X, Y and Z - See page 5. No suffix required for normal position. Connector Modification* Omit for standard olive drab with silver plated contacts i.e.: (014) Olive drab cadmium plate, nickel base (B30) gold/nickel plated contacts (025) Black zinc cobalt (027) Conductive black zinc cobalt (024) Green zinc cobalt (LC) Less contacts * Consult Amphenol, Sidney, NY MATEABILITY WITH IDENTICAL CONTACT ARRANGEMENTS Connector Style 88 Mateable with Style GT00 GT06 / 062 / 064 / 065 / 08 GT01 GT06 / 062 / 064 / 065 / 08 GT02 GT06 / 062 / 064 / 065 / 08 GT020 GT06 / 062 / 064 / 065 / 08 GT030 GT06 / 062 / 064 / 065 / 08 GT06 / 062 / 064 / 065 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB GT07 / 070 GT06 / 062 / 064 / 065 / 08 GT08 GT00 / 01 / 02 / 020 / 03 / 030 / 05 / 070 / TB GTTB GT06 / 062 / 064 / 065 / 08 Amphenol (R) GT Connectors with RADSOK technology Amphenol offers Amphe-Power Connectors, high amperage capability connectors designed for the most demanding industrial and transportation applications. The GT connectors, in most shell styles, can be enhanced with RADSOK contacts that handle up to 150% higher amperages than standard contacts. The RADSOK contact is a hyperbolic, stamped grid configuration within the socket. As male pin is inserted, axial members in the female half deflect, imparting high current flow across the connection with minimal voltage loss. This design ensures a large, coaxial, face-to-face surface area engagement and provides higher current capacity with minimized temperature rise. The RADSOK's strongest benefit is its very low mill-volt drop because of the intimate contact provided by the spring force of the grid. RADSOK contacts are available in size 8 (69 amps), size 4 (120 amps), and size 0 (250 amps). Current Amphe-Power lines support from 50A to 500A continuous duty. Hybrid arrangements with RADSOK and power contacts can be tailored to meet customer needs. For more information on GT Amphe-Power Connectors, request Brochure SL-391. Amphenol (R)GT Amphe-Power Connectors with RADSOK (R) high amperage contacts The RADSOK Contact Advantage: * * * * * Low contact Resistance Low milli-volt drop performance Higher current capacity with minimized temperature rise. Reliability under vibration and shock. High quality, consistency and lower cost Amphe-PowerTM Amphe-GTR The Amphe-PowerTM GT series provides the benefit of a GT connector in a high performance composite material. The GT-R is listed to UL/CUL 2238 Standard, Control Number 19VP. It also meets all of the specifications for high power process control and server applications. Performance level is the same as that of the GT series. RADSOK contacts enable an increased current rating of 120A on individual contacts, and a standard PG thread achieves an IP67 seal rating. Amphe-Power Composite GTR Connector Compression (setscrew) wire termination to the 4/6AWG or 8/ 10AWG conductors allows for easy field replacement of pin or socket contacts. It also provides for easy complete plug or receptacle assemblies, all without a need for specialized tooling. Power GT The Power GT is a modification to the GT series incorporating three 8.0mm RADSOK contacts mounted in a common termination to busbar or cable, enhanced to an ultra-high current density in a compact shell size 28 layout. This design created the first TUV "finger-proof" 500A connector in the marketplace with the "dead-front" pin design to prevent contact with live circuits. In environmental versions, this connector achieves IP67 performance. The ninety-degree wire orientation on the plug provides low-profile mounting for tight packaging requirements. This plug is designed to be over-molded, and can also be fitted with mechanical hardware for individual requirements. Power GT, Finger-Proof 500A Connector 89 Amphenol (R) GT Connectors special applications GTC-M Series - The GT with Metal Clip Inserts Amphenol's GTC-M series combines the GT reverse bayonet connector and the rear release metal clip retention system which is used in the Amphenol(R)/Matrix(R) MIL-C-5015 connector line. Another benefit is the captivated coupling nut assembly which allows unmating without the rear accessories attached. Improved environmental sealing is achieved with this series. The crimp joint is covered by a three-webbed fluorinated silicone grommet that seals on the wires without the necessity of an additional sealing clamp. An interfacial seal with conical towers on the pin insert matches with recesses on the socket; a match that provides the popular "cork and bottle" seal during mating. The grommet and the interfacial seal provides adequate sealing during environmental extremes. The GTC-M series is intermateable and intermountable with the standard GT series, and it uses standard M85049 style rear accessories. For more information on the GTC-M Series, request Product Data Sheet #181. Amphenol (R) GTC-M with Metal Clip Inserts GT-PC Connectors for High Voltage Power Applications The Amphenol(R) GT-PC connectors were developed for use in the High Voltage Power Distribution industry. Incorporating all the standard features of the popular GT series, these connectors will prevent accidental electrical shocks to the technicians. "Dead Front" pin contacts in size 0 are recessed into a socket insert, preventing inadvertent contact with a live circuit. Higher amperage levels are provided - up to 100 amps per contact. The GT-PC series has been UL approved. "First Mate - Last Break" features on one or more of the pins provide an additional measure of operator safety. Currently there are 5 insert patterns available. Consult Amphenol Industrial Operations for more information. GT Connectors for the HMI Lighting Industry Amphenol provides GT connectors for the rugged use experienced during stage shows and other entertainment events, even outside in the elements. The same 3-point bayonet coupling system and the same ruggedness to survive 2000 mating cycles are provided. The unique features of this connector series include color-coded receptacle shells with matching backshells on the cable plugs. The colors can be matched to specific wattage cables and/or light systems. A wide selection of environmental adapters designed to seal on the outside diameter of specific cable diameters can be fitted to the backshells. Applications for these connectors include power and control of lighting trusses, and portable power and dimmer racks. For more information request Product Data Sheet #174. Amphenol (R) GT-PC Connectors for High Voltage Power Applications Amphenol (R) GT Connectors for the HMI Lighting Industry 90 Additional Amphenol Industrial Connectors for the Rail Industry ARCL Series Amphenol has developed a heavy duty 5015 type connector with 38999 Series III type coupling for use in mass transportation and heavy equipment applications. The ARCL Series has the same electrical characteristics as 5015 standard product but it has rugged ratchet double start stub threads. These rugged double stub threads eliminate mis-mating and provide for easy cleaning. Other features/benefits of the ARCL connector series: * * * * * * * 5 key/keyway alignment feature. Operating temperature is from -55C to +125C. Operating voltage is to 3000 VAC (RMS) at sea level. Crimp and solder termination available. 5 shell styles with all the 5015 insert patterns available. Supplied with low smoke, low halogen inserts which are flame retardant, but also can be supplied with standard 5015 inserts. Wide variety of backend accessories for all styles of cable and conduit, and a variety of cable strain reliefs including over-molding and heat shrink boots. RADSOK high amperage sockets can be incorporated. Amphenol (R) ARCL Series Star-Line(R) Series Amphenol/Pyle Star-Line Series is another heavy duty environmental cylindrical connector widely used in mass transportation and in the oil exploration market. Ideal for high amperage and high density control and instrumentation applications, this series has features and benefits as follows; * * * * * * * * Hard anodic coating for dielectric strength with heat and corrosion resistance. Operating temperature is from -67F to +257F. Amperages up to 1135 amps at 1000VAC or DC rating available. Double lead Acme threads provide complete coupling in one turn of the coupling nut, and do not clog under adverse weather conditions. Solder, crimp and pressure terminals; circuit breaking power and control types available. UL listed and CSA listed for circuit breaking capability. 5 shell styles with over 150 insert patterns. 3 retention styles with captive contacts or insertable/removable contacts. Variety of backend accessories including basketweave cable grips, straight or angled adapters and receptacles mounted to junction boxes. Amphenol(R) Star-Line(R) Series Over-Molded Cable Cables can be designed with custom overmold to Amphenol Industrial cylindrical connectors for almost any application in mass transportation or any other types of industrial markets. Overmold seals to the rear of the connector and to the cable jacket to provide moisture sealing. Cables may be designed to meet any environmental performance requirement and any electrical performance requirement. Variety of materials are available: neoprene, hypalon and others. Consult Amphenol Industrial Operations for further information on these industrial products. Over-Molded Cable for Industrial Connectors 91 Additional Amphenol Industrial Products for the Rail Industry, cont. Trans-Power(R) Connectors Amphenol/Pyle provides head-end power connectors for commercial rail systems. These meet Amtrak specification D-77-24, APTA #RP-E-016. Features and benefits include: * * * * * * Slip-fit, double seated for environmental protection. Retention by receptacle cover or optional accessories. Crimp termination per Amtrak and APTA specifications. Socket contacts provide uniform pressure for low mating and unmating forces, low voltage drop, consistently low temperature rise and shock resistance. Operating ambient temperature is -57F to +110F. Electrical performance up to 600 volts, 400 Amps. All molded elastomeric rubber body on jumper. Raintight per U/L standard. Amphenol (R) Trans-Power(R) Connectors for Rail Mass Transit 27 Pole Train-line Receptacles and Jumpers Amphenol/Pyle 27 pole MU (multiple unit) and communication receptacles and jumpers are provided for rail applications. Jumpers are either standard car to car, between locomotives or between locomotives and lead cars. These products are designed to Amtrak and APTA specifications. Other design features and benefits: * * * Locomotive jumpers are keyed differently from all other 27 pole jumpers to prevent mis-mating. They also have identification markings to distinquish their proper usage on locomotives. Receptacles are a rugged aluminum housing with a spring loaded cover. Receptacles can be provided with or without leads. Push-pull mating. Amphe-Y Composite Molded Connectors Amphenol(R) 27 Pole Train-line Receptacle and Jumpers for Rail Mass Transit The Amphe-Y is a new Amphenol product for mass transit application that uses RADSOK high amperage sockets. It is a molded interconnect system that provides rapid and safe connect and disconnect for traction motor installation and repair. This packaging solution consists of a molded base plate, a silverplated copper "connector" with RADSOK contacts, and a molded top cover. When attached to the traction motor, this unit creates a safe, reliable and efficient means of conducting high amperage current from the third rail or catenary to the propulsion controller. Each "leg" of this assembly can safely accommodate up to 1000 amps through the 18mm RADSOK contacts. Amphenol has wide capabilities in designing specialty molded interconnect solutions, such as the new Amphe-Y, for power and/ or harsh environment applications. Custom designs can include bayonet, theaded or push-pull coupling with crimp solder or pressure termination. They can utilize RADSOK or standard contacts and can be designed to meet specific environmental sealing requirements and temperature ratings. Amphe-Y Molded Interconnect System for Rail Mass Transit Consult Amphenol Industrial Operations for further information on these industrial products. 92 Amphenol GT Series Reverse Bayonet Coupling Connectors (R) 12-024-8 Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments AMPHENOL CORPORATION Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, New York 13838-1395 Phone: 800-678-0141 or 607-563-5011 www.amphenol-industrial.com Amphenol