BRANCHE CONNECTEURS AEROMILITAIRES AFD series Norme MIL-C 26482 G Series 2 AFD Summary Introduction 1 Advantage 2 Technical characteristics 3 Part-numbering system 4 Standard equivalence 5 Synoptic 6 Arrangements 8 Receptacles 10 Plugs 14 Large receptacles 18 Mating and unmating dimensions 21 Accessories 22 Protective covers 24 Contacts and tools 26 Contacts and tools for coax 28 Bushings 30 Part-numbering system hermetic 31 Hermetic receptacles 33 AFD Introduction 4 5 3 6 2 7 1 1- 2- 3- 4- 5- 6- 7- 8 Triple wire seal. Mechanical retention of insert into shell by means of snap ring. Interfacial seal ensured by compression of insert and static / dynamic seal. Contacts individual sealing at coupling stage by compression of elastomer conical risers on hard insert. Anti-friction washers for constant mating force. Insert to shell sealing with potting. Connector's rear part fitted with a teeth anti-rotation system assuming an effective tightening and clamping. 11 AFD Advantages Representing the most advanced design in use which both reflects and sets the pace for future developments, Compagnie DEUTSCH presents its AFD series connectors meet requirements of MIL-C 26482 G series 2 bayonet coupling connectors. The Compagnie DEUTSCH AFD series connectors offer several advantages over previous devices such as : * Higher performance characteristics. * Completely sealed against rigorous environments. * Reduced assembly and rework costs. * Simplified assembly procedures. * Hard plastic socket interface prevents penetration of bent pins. * Rear release system from the rear of the connector. * RFI fingers available for AFD 57 only. * Intermateability and interchangeability with Compagnie DEUTSCH series connectors : - 951 meet requirements of NFL 54125 B and UTE 93422 model HE 301 B. - FDBA meet requirements of MIL-C 26482 and UTE 93422 model HE 302 and 303. * Available in 9 shell sizes and 27 various insert arrangements. * Hermetically sealed electrical connectors in DBC version. 2 AFD Technical characteristics Mechanical Shell and accessoires Material Plating Silicone insert Material Resistance Type Finish Contact : Aluminum alloy : Nickel, standard, corrosion test as per MIL - STD 1344 Modifications index olive drab cadmium : Front and rear silicone inserts are devoid of all organic matter : Withstands fluids to MIL-C 26482 G standard : Crimp type : Gold over nickel : 500 full coupling and uncoupling cycles 250 RFI fingers cycles Contacts withstand a minimum load of : Size 20 : 6,93 daN Size 16 : 11,56 daN Size 12 : 11,56 daN Size 8 : 11,56 daN : - 55 C to + 200 C : Leakage inferior to 16 cm3/hour under a 2,1 bars differential pressure : 5 cycles of - 55 C to + 200 C : No mechanical nor electrical failure further to 12 hours vibration (4 hours in the 3 axes), 20 G from 10 to 2000 Hz : 100 G 11 ms in the 3 axes Durability Contact Retention Temperature Air Leakage Thermal Shocks Vibrations Physical Shocks Electrical Withstanding voltage at sea level at 15000 m altitude at 21000 m altitude at 33000 m altitude Insulation resistance Contacts maximum current Contact millivolt drop Allowed wires section Diameter over insulating sheath : Service 1 : 1500 V 50 Hz (R.M.S) Service 2 : 2300 V 50 Hz (R.M.S) : Service 1 : 500 V Service 2 : 750 V : Service 1 : 375 V Service 2 : 500 V : Service 1 : 200 V Service 2 : 200 V : Higher than 5000 M at 25 C at 60% R.H. : Size 20 : 7,5 A. Size 16 : 13 A. Size 12 : 23 A. Size 8 : 46 A. : Size 20 : 15 mv at 7,5 A. Size 16 : 21 mv at 13 A. Size 12 : 22 mv at 23 A. Size 8 : 25 mv at 23 A. : Size 20 : 0,21 to 0,60 mm2 Size 16 : 0,60 to 1,34 mm2 Size 12 : 1,91 to 3,18 mm2 Size 8 : 5,30 to 8,98 mm2 : Size 20 : 1,01 to 2,10 mm Size 16 : 1,73 to 2,62 mm Size 12 : 2,69 to 4,01 mm Size 8 : 3,80 to 5,15 mm 3 AFD Part numbering system Insert arrangement (see page 8) Special modifications Without accessories : 1A Nickel straight cable clamp : 059 Nickel 90 end bell cable clamp : 081 Nickel potting cup : A 083 Olive drab cadmium plating : A 231 Nickel thermo-shrink sleeve : A 315 Nickel grounding adaptor : A 564 Olive drab cadmium without backshell : A 5324 Olive drab cadmium straight cable clamp : A 5347 Olive drab cadmium grounding adaptor : A 5534 Olive drab cadmium 90 end bell cable clamp : A 5543 Olive drab cadmium fitting for thermo-shrink : A 5563 Olive drab cadmium potting cup : A 5629 Shell size 08 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Connector type To MIL-C 26482 G serie 2 Manufacturer Deutsch 9 AFD 50 12 8 P N 8 *** Index for contacts Shell type 50 : Square flange receptacle 51 : Cable connecting receptacle 54 : Single hole mounting receptacle 56 : Plug 57 : Plug with RFI fingers 58 : Large square flange receptacle Contacts Type Contact type Male contact : P Female contact : S (see page 26 to 29) Size 20 - 16 - 12 standard coax Size 8 solder type (power) Size 8 crimp type (wire size 10) Size 8 crimp type (wire size 8) Insert clocking position Normal : N (see table page 7) : W-X-Y or Z Coax as per wire used Without contact Connectors weight in grams Size AFD 50 Shell and contacts without backshell Male Female AFD 54 Shell and contacts without backshell Male Female 8-3A 10-06 12-10 14-19 16-26 18-32 20-41 22-55 24-61 7,60* 11,50 14,50 18,00 23,10 26,10* 32,20* 39,80* 49,50* 10,80* 14,50 20,90 25,80* 31,50 37,60* 49,10 56,80* 65,50* 8,00 12,30 15,20* 19,50* 25,70* 29,00 36,20 44,00 56,00 AFD 56/57 Shell and contacts without backshell Male Female 11,20 15,20 21,60 27,30 34,10* 40,50 53,10* 61,00 72,00 10,00 14,70 20,10 22,50 28,70 34,00 39,70 46,00 53,10 10,40 15,50 20,80 24,00 31,30 36,90 43,70 50,20 61,20 * Calculated value Contacts weight in grams Taille Type 20 P S P S P S P S P S 16 12 08 Coax. Reference 006-0937-20-A 006-0912-20 006-0937-16-A 006-0912-16 006-0937-12-A 006-0912-12 005-0893-08 005-0896-08 005-0920-00 005-0921-00 4 Weight in grams 0,25 0,28 0,56 0,61 1,23 1,22 3,18 2,90 6,68 6,88 Index no index 8 87 88 1 9 F1 090 Accessories weight Backshell 2,44 5,49 6,48 7,48 8,99 10,97 11,97 13,97 15,16 Straight 900 end bell cable clamp cable clamp 6,50 7,90 7,70 9,90 12,00 13,70 15,00 17,10 18,50 8,35 10,10 11,70 15,20 16,50 20,35 24,90 26,20 34,70 AFD Standard equivalence Connectors Reference MIL-C 83723 M 83723-02-R-**-N M 83723-02-A-**-N M 83723-01-R-**-N M 83723-01-A-**-N M 83723-04-R-**-N M 83723-04-A-**-N M 83723-03-R-**-N M 83723-03-A-**-N M 83723-06-R-**-N M 83723-06-A-**-N M 83723-05-R-**-N M 83723-05-A-**-N M 83723-08-R-**-N M 83723-08-A-**-N M 83723-07-R-**-N M 83723-07-A-**-N M 83723-14-R-**-N M 83723-14-A-**-N MS 83723-13-R-**-N MS 83723-13-A-**-N M 83723-42-R-**-N M 83723-42-A-**-N M 83723-43-R-**-N M 83723-43-A-**-N Reference MS 3470 Reference Panavia 6432 Reference Deutsch MS 3470-W-**-P/N MS 3470-L-**-P/N MS 3470-W-**-S/N MS 3470-L-**-S/N MS 3472-W-**-P/N MS 3472-L-**-P/N MS 3472-W-**-S/N MS 3472-L-**-S/N MS 3474-W-**-P/N MS 3474-L-**-P/N MS 3474-W-**-S/N MS 3474-L-**-S/N MS 3471-W-**-P/N MS 3471-L-**-P/N MS 3471-W-**-S/N MS 3471-L-**-S/N MS 3476-W-**-P/N MS 3476-L-**-P/N MS 3476-W-**-S/N MS 3476-L-**-S/N MS 3475-W-**-P/N MS 3475-L-**-P/N MS 3475-W-**-S/N MS 3475-L-**-S/N - PAN 6432-1B-**-P/N PAN 6432-1B-**-P/N PAN 6432-1A-**-P/N PAN 6432-1A-**-S/N PAN 6432-1F-**-P/N PAN 6432-1F-**-S/N - AFD 50-**-P/N A 5324 AFD 50-**-P/N A 5727 AFD 50-**-P/N A 5730 AFD 50-**-P/N 6116 AFD 50-**-S/N A 5324 AFD 50-**-S/N A 5727 AFD 50-**-S/N A 5730 AFD 50-**-S/N 6116 AFD 58-**-P/N A 5727 AFD 58-**-P/N A 5730 AFD 58-**-P/N 6116 AFD 58-**-S/N A 5727 AFD 58-**-S/N A 5730 AFD 58-**-S/N 6116 AFD 54-**-P/N A 5324 AFD 54-**-P/N A 5727 AFD 54-**-P/N A 5730 AFD 54-**-P/N 6116 AFD 54-**-S/N A 5324 AFD 54-**-S/N A 5727 AFD 54-**-S/N A 5730 AFD 54-**-S/N 6116 AFD 51-**-P/N A 5727 AFD 51-**-P/N A 5730 AFD 51-**-P/N 6116 AFD 51-**-S/N A 5727 AFD 51-**-S/N A 5730 AFD 51-**-S/N 6116 AFD 56-**-P/N A 5324 AFD 56-**-P/N A 5727 AFD 56-**-P/N A 5730 AFD 56-**-P/N 6116 AFD 56-**-S/N A 5324 AFD 56-**-S/N A 5727 AFD 56-**-S/N A 5730 AFD 56-**-S/N 6116 AFD 57-**-P/N A 5727 AFD 57-**-P/N A 5730 AFD 57-**-P/N 6116 AFD 57-**-S/N A 5727 AFD 57-**-S/N A 5730 AFD 57-**-S/N 6116 Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Contacts with 3 color bands Black anodized Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Nickel plating Black anodized Olive drab cadmium Nickel plating Black anodized Rear accessories Nickel plated Ms Nickel Reference Backshell MS 3416-**-EN Straight cable clamp MS 3417-**-N 900 end bell cable clamp MS 3418-**-N Finish Contacts Olive drab cadmium MS olive drab cadmium Deutsch olive drab cadmium Reference Reference Deutsch Nickel Reference 94002-**-3014 MS 3416-**-EC 94002-**- A 231 94003-**-3014 MS 3417-**-C 94003-**-A 231 94004-**-3014 MS 3418-**-C 94004-**- A 231 Size 20 16 16 12 12 Type P S P S P S P S P S Reference norm M M M M M M M M M M 39029/4-110 39029/5-115 39029/4-111 39029/5-116 39029/4-112 39029/5-117 39029/4-113 39029/5-118 39029/4-114 39029/5-119 5 Deutsch reference to be ordered 006-0937-20-A 006-0912-20-A 006-0937-16-A 006-0912-16-A 006-1168-16-A 006-1169-16-A 006-0937-12-A 006-0912-12-A 006-1157-12-A 006-1159-12-A 834 834 834 834 834 834 834 834 834 834 AFD Synoptic Accessories Receptacles Plugs Accessories Square flange 4 holes mounting Backshell Backshell Single hole mounting Hermetic receptacle Straight cable clamp Straight cable clamp Square flange 4 holes mounting Plug with RFI fingers 90o end bell cable clamp 90o end bell cable clamp Single hole mounting Dust cap Solder flange Grounding adaptor Grounding adaptor Dummy receptacle For receptacle self-secured Square flange 4 holes mounting Thermo-shrink sleeve Dust cap Thermo-shrink sleeve For plug-self secured Potting cup Potting cup 6 AFD Insert clocking position and contacts sizes N W H G A B A H F C C Normal clocking position B D D E J F J E K K G Clocking position W Exemple of insert angular displacement, pin front face view Clocking position is normal when the insert vertical axis is intermingled with the shell keyway axis. An unkeying can be performed between 2 connectors of same layout by angular displacement of one of the inserts in its shell. This insert rotation is made in the clockwise for pin layouts and in the counter clockwise for socket layouts. Angular displacements on the hereafter table give clocking positions W, X, Y or Z. Insert Arrangt. 08-3A 08-33 8-98 10-6 12-3 12-8 12-10 14-4 14-5 14-12 14-15 14-18 14-19 16-8 16-26 18-8 18-11 18-32 18-918 20-16 20-39 20-41 22-12 22-21 22-32 22-41 22-55 24-19 24-31 24-37 24-53 24-61 24-100 Clocking position in degrees w x y z 60 90 60 90 90 60 40 43 17 15 30 54 60 62 85 238 63 45 16 72 39 30 30 90 25 90 45 210 112 155 92 90 110 90 165 152 105 119 138 318 144 126 135 145 135 142 165 225 50 180 90 180 203 270 184 155 180 315 180 275 241 222 333 252 225 175 215 264 226 315 75 270 135 292 295 273 234 270 331 338 340 265 347 333 349 288 314 324 - Contacts sizes 16 12 8 or Coax 20 3 3 3 6 3 5 4 1 8 11 16 2 21 14 31 37 - 8 10 8 14 18 19 26 32 16 37 41 32 27 55 51 61 - 7 4 8 12 19 - 2 2 10 Standard Hermetic l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l Serv I I I I II I I I II I I I I II I I II I I II I I I II I I I Il I I I I I AFD Arrangements Male insert, front face view or female insert, wiring side view. C B A C B C A B A C A B A C B A B C C B A C B B A C B Disposition 08-33 3 contacts size 20 Disposition 08-3A 3 contacts size 20 C A C G A F B E A H G H F B CE D C D FB B H E D A F A E B C D Disposition 10-6 6 contacts size 20 Disposition 08-98 3 contacts size 20 G A C A A A C H G B F K A JG E BH DF CK A E B H A D F E J G C K J B D C D DD Disposition 12-10 10 contacts size 20 * Disposition 12-8 8 contacts size 20 BB Disposition 14-4 4 contacts size 12 DD J A AA B BB C CC E EE A AA D DD A AA H HH B BB G GG J JJ B BB M MM C CC F FF A AA M MN N N B B B TU U UP P P C C C S SR R R D D D GF F F E E E G GG Disposition 14-12 8 contacts size 20 4 contacts size 16 A A AB B B M MM A AA M MM B BB R RR N NN J JJ C CC P PP H HH D DD K KK C CC E E ED D D Disposition 14-5 5 contacts size 16 L L LL L LL K KK F FF JJ E EE KK HH LL AA MM NN BB SS RR DD TT GG UU PP FF EE K H CC L T G KK * M S LL JJ N U B P R F D E NN HH TT VV GG PP SS RR FF L K U J K LL FF M AA B JJ MM C MM A A B B UU HH GG BB CC A C N P V T H C E AE D D B S G C R E F CC DD EE Disposition 14-19 19 contacts size 20 Disposition 14-18 18 contacts size 20 Disposition 14-15 14 contacts size 20 1 contact size 16 AA EE CC B D C AA Disposition 12-3 3 contacts size 16 A E B L L LN NNP PPC CC K K KU U U V V V R R RD D D J J J T T TS SSE EE H H HG GG F F F A A GG F F E E HH P P B B NN CC DD Disposition 16-8 8 contacts size 16 MM L L RR a a S S Z Z Y Y K K J J A AB B T T b b c c UU V V X X WW HH GG G G CC DD F E E F E F F Disposition 16-26 26 contacts size 20 A H E A H D B B C D Disposition 18-8 8 contacts size 12 * Consult us 8 H H C J J G G F F A A K K L L E E B B C C D D Disposition 18-11 11 contacts size 16 P N M R Pd Nc L T A T S S Re Mb L K f d j c a U V U e b h K J j g Za f W h HJ Y Z Male insert, front face view or female insert, wiring side view. J Y A A K K L L E E B C B C N D D S S R e R P d P d N c M b M T T j c L L e b a K K A A U U j g f f h aZ J Z X Y H JH X E Y F G G J D W D W g h B C C B V V F E B Z c J C a b H D G J E T MS H H F U R G j J i h Kr M f N F B s g PL G A W A V M E F q X B A Y k t p C nK b c L Dd e K L B Z m E A D CF H L L E F F D A KM H G G G B M H H E J T U S V W k j i R X h P s Tr g Z W X V mj U ns ti q S R N M Z ct q dJ eg N K L AM C L m D b K pr h f P ak B Y M H f J L E U G H B a N n pF C b T A V U D cV K S R JG K T S g f R m d N V T n S e P A c M L R P N V U h k p k b K j h g B W W m BB i AA j y a H k BM j s U P iL E F Y X W Tr R US h g GS J P N Z W mj V N T P P F F M C N E E B C B K C n CCX KK Y HH Z x J B N W V J L E F U K H A P MC L XD J A K B W R S T U E HF G D V CK S K A qD V h R E T Pf M L G B X p D T DD E S Y q EE LL R F FF GG P v w G N f B U V C W A n X D p m E a CC DD BB F j b KK s AA LL G h d HH y GG t H g e x w J K M f k Z r L L Y T q S EE R FF Pv N B U Z r s t K C V k j h g D m a BB b AA d y e M W A n E CC F KK G HH H x J X p DD LL GG w f Y q EE FF v B Z A D B bV W L C E p X cC q Y F BB DK r K CC Z DG s dHH E DDJ a EE H F Jt Jb E u v c G e a b d t e K d L M C R N Z YY P X U Z N W J B F K C WR V T B M P P P N N L M S L K K H F X U Z J N R C W b Tg X K H M P J W A P X U jZ HF f E B N A C acD Y e G G a b k j E h e FT M V G n F G F L D T WE S V F R U G P T H N JS XU r tm k s j q BB FF h g p R AA EE y DD M n P A aX Rb R Td g SS h Disposition 24-61 61 contacts size 20 9 d d T T S S b b F F c c V V U U D D a a E E J J L L K K H F C Tj CcD E WE e D N M A BP F f U X V R R G G H H j i i h h g g P P W f N N r s f M S T d DJ Z Y g MP Lh K X H E F G C K U V a L B R b a c Zj f Y J N A Rb dg e W hL S K X N ac C ZjT f UY e Rb F h dg D X V J W E H G A PB M V S Cc Tj f U W H F G A B P D e E B R S C T d D U V E F G * Disposition 22-32 32 contacts size 20 U A B V C nB W p M X q AAL BY r BBC Z D Z CC GG s Y QHH E a fDDC FF FD tR EE X R u w b v c e D f W SGE d e H VJ K FH E bB n n C C Z Z m m p p e e M M G B X N r sa t g c d H U C Y Z A P D a b b G c T F E F L B Q R S E S K RC J PD N T Y f X e W d HM M U Z g f n e m V c G L N A A V M L B U B P T C W Y Q a S f X h K b R i g X R e Y p J c P j W S d d Z k N aT U H b M HE F J Z g D f C E n e D F m K A V VG c G L h p k N A B P TC W a S g d b U K E MH F J S dZ T Na R eY c Pj Q fX b Ri A B U V gD C nE D mF cG h C X i p Y j k Z a b L B W H J K Disposition 24-31 31 contacts size 16 A Z a A Z A A Z Y W a B b a Y B Hu B Y B X b C C V X Y c u n un u c v v Y X Uc v t D D C C C X p p Z td Z t dm d W GG T E E CC a GG D w W q w k a GGCC D GG Ds W qw G HH HH DD BB e DDHH sr e sr eV FF S F F NN j xFF x x KK EE KK EE FF b b E V JJ rE NN NN V JJ NN E JJ LL LL AA f EE r s f r s U f R G G MM yEE y y PP FF PP HH PPF FF HH h EEd d q U F U F MM KK MM KK MM KK y g q t q t GG GG g H DD P H Tg F LL x v LL v x z DD LL g z DD z e e p T G G T G CC w w p p h h h CC J AA CC N AA CC J AA S n BB BB S BB M K K H H S H i n in i m f f R E j j j m R J m Jm R J k k k P L L N PK KP K N L N L N L M M M Z W Y V q q f f Y Y k k r r B B Disposition 20-39 37 contacts size 20 2 contacts size 16 B S a DV hL JE Y G A N U T * Consult us G A N U A A T B V V T S AC W BS M W n M A A p p m m X m q N AA kL Bq AA Nk Y z z PR L BB zC R BB PDP Z Nr P j j Z CC CC GG GG y y a Y ay P Q HH P s HH E i i DD FF C a KDDb K FF V V x K N b REE Ux f D EE xF Nt g g X R u w w h hb u v c v g e cD Jg c g J S S f JM Ed Tf M dG d W d S e e L L L H V T JT K J K G GU FH HE U S A Df i G HH H J M Disposition 24-53 51 contacts size 20 2 coax or size 8 A X G * * D D Disposition 24-19 19 contacts size 12 C s S S h h X X j j i i R R g g * C r C C E E F F T T Disposition 22-21 21 contacts size 16 Y ka N N P P G G M P J H E F L U J D T G W L B R C N M A C XD V E P B B W W A A V V U U Disposition 20-16 16 contacts size 16 B N M M R R H H D D A A S S J J Disposition 22-55 55 contacts size 20 Disposition 24-37 37 contacts size 16 H Q M L L K K A A Y Z Z X B B C WC ka a UB U A B M A m m D V D T B bV bj T n S sn n n W S s n E U E p m X P L i c mC N P c t q kt k AA AA pF Tr p pF r z z R r BB R j j GG Rq Uy GGG D dVq CC KS y G sR dh HH P P ge i g e FF i DD e FF R H EE Hx x N N t f f S J PJ E T Su w w hJ h v N K g Kc gN K M L M L f M f d M F HL Ge L HF K K J A X CN i t FH A H M J S T Q L G D Disposition 22-41 27 contacts size 20 14 contacts size 16 U S R R A A Disposition 22-12 12 contacts size 12 T d e L M C KM * A L * Disposition 20-41 41 contacts size 20 Y H K Disposition 18-918 16 contacts size 20 2 contacts size 8 or coax a J K G G J C J H Disposition 18-32 32 contacts size 20 m d AFD Arrangements v b A X cA Y B H td Z u C a v W w GG D HH HH s eB G J J x FF V JJ NN E r f yEE PP PPU MM F KK q g LL LL z DD K K T F G C p h CC AA BB BB S H i n j m E J DR k k M L KP Disposition 24-100 10 coax or size 8 * N M b A B H Ac G JJ w KK F AA j D L d x Be y z i K A C C h E J D J E f F g H K G D AFD Receptacles Square flange D E D B C L1 L E C F G F 4,80 max. With backshell Nickel plating without Mod. Olive drab cadmium plating Mod. A 231 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,76 34,92 11,13 11,13 11,13 11,13 11,13 11,13 14,30 14,30 15,10 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 12,70 15,85 19,05 22,20 25,40 26,95 30,15 33,30 36,50 36,85 36,85 36,85 36,85 36,85 36,85 38,40 38,40 38,40 30,85 30,85 30,85 30,85 30,85 30,85 32,35 32,35 32,35 Olive Drab Cadmium Plating Reference 7,75 10,29 13,49 16,89 20,07 22,07 25,25 28,42 31,60 AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 5324 5324 5324 5324 5324 5324 5324 5324 5324 Mounting styles Panel cutout C E With flat gasket H Size 08 10 12 14 16 18 20 22 24 C 4 holes O 3,15 0,15 : size 08 to 22 4 holes O 3,73 0,15 : size 24 E Overall (as per accessory) 4 holes O 3,30 max. size 08 to 22 4 holes O 3,88 max. size 24 Without backshell Nickel plating Mod. 1A Olive drab cadmium plating Mod. A 5324 B C D E F G G1 L L1 P max. 0,1 0,15 max. max. max. max. max. max. max. 1 1 1 1 1 1 1 1 1 B G1 P Flat gasket for square flange E B With flat gasket C To order apart H Front Flange Mounting Size Reference H max. B max. C 0,1 E max. 08 10 12 14 16 18 20 22 24 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,75 34,92 2,50 2,50 2,50 2,50 2,50 2,50 5,40 5,40 5,40 624 624 624 624 624 624 624 624 624 12,50 15,40 19,50 22,70 25,90 29,10 32,30 35,40 38,60 B 4 holes O 3,30 max. : size 08 to 22 4 holes O 4,30 max. : size 24 E 108-0003-08-A 108-0003-10-A 108-0001-12-A 108-0001-14-A 108-0001-16-A 108-0003-18-A 108-0003-20-A 108-0003-22-A 108-0003-24-A C 10 Rear Flange Mounting H Reference Size max. 13,20 16,40 19,50 22,70 25,90 27,50 30,60 33,50 37,00 108-0001-08-A 108-0001-10-A 108-0001-12-A 108-0001-14-A 108-0001-16-A 108-0001-18-A 108-0001-20-A 108-0001-22-A 108-0001-24-A 624 624 624 624 624 624 624 624 624 08 10 12 14 16 18 20 22 24 C H E 0,1 +0 - 0,2 max. 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,76 34,92 16,05 19,00 22,25 25,40 28,60 31,75 34,90 38,10 41,30 2,50 2,50 2,50 2,50 2,50 2,50 5,40 5,40 5,40 AFD Receptacles Square flange * With straight cable clamp Nickel Plating Reference L AFD AFD AFD AFD AFD AFD AFD AFD AFD J1 J G O tightened clamps O allowed cable o * With 90 end bell cable clamp L T O tightened clamps J1 O allowed cable J 059 059 059 059 059 059 059 059 059 J mini. J1 max. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 45,85 45,85 45,85 51,85 51,85 51,85 53,35 53,35 53,35 AFD AFD AFD AFD AFD AFD AFD AFD AFD J1 max. L max. T max. Olive Drab Cadmium Plating Reference 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 49,30 51,65 54,10 57,35 60,75 64,20 69,05 72,15 75,25 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD L J G O allowed cable * Fitting for thermo-shrink sleeve 3,30 mini. O allowed cable S 081 081 081 081 081 081 081 081 081 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* * With grounding adaptor J O allowed cable A A A A A A A A A 315 315 315 315 315 315 315 315 315 G AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 5543 5543 5543 5543 5543 5543 5543 5543 5543 G max. J mini. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 4,60 6,60 10,00 11,50 15,30 17,30 20,50 23,70 26,80 44,70 44,70 44,70 50,20 50,20 50,20 51,70 51,70 51,70 AFD AFD AFD AFD AFD AFD AFD AFD AFD 083 083 083 083 083 083 083 083 083 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 5629 5629 5629 5629 5629 5629 5629 5629 5629 G max. J mini. L max. P max. S max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,50 9,20 12,65 14,50 17,70 19,70 22,90 26,05 29,00 46,55 46,55 46,55 46,55 46,55 46,55 50,35 51,00 51,00 13,55 15,40 19,70 21,30 24,50 26,50 30,95 34,45 36,65 7,80 7,80 7,80 7,80 7,80 7,80 10,08 10,65 10,65 AFD AFD AFD AFD AFD AFD AFD AFD AFD Nickel Plating Reference L 5347 5347 5347 5347 5347 5347 5347 5347 5347 J mini. Nickel Plating Reference J P G A A A A A A A A A G max. * With potting cup L 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD G 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* G max. 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 564 564 564 564 564 564 564 564 564 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 5563 5563 5563 5563 5563 5563 5563 5563 5563 G max. J mini. L max. Olive Drab Cadmium Plating Reference 18,00 20,10 24,40 27,50 30,85 33,90 37,10 40,20 43,40 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 65,90 65,70 65,60 65,80 65,60 64,90 67,25 67,35 68,00 AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-08-**-P/S-* 50-10-**-P/S-* 50-12-**-P/S-* 50-14-**-P/S-* 50-16-**-P/S-* 50-18-**-P/S-* 50-20-**-P/S-* 50-22-**-P/S-* 50-24-**-P/S-* A A A A A A A A A 5534 5534 5534 5534 5534 5534 5534 5534 5534 Note : L dimension calculated for a braid of 1 m/m thickness 11 AFD Receptacles Single hole mounting L B L1 D E E D F M F G P G1 4,80 max. With backshell Nickel plating without Mod. Olive drab cadmium plating Mod. A 231 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A Without backshell Nickel plating Mod. 1A Olive drab cadmium plating Mod. A 5324 A B D E F G G1 L L1 M P max. max. 0,15 max. max. max. max. max. max. max. max. 1 1 1 1 1 1 1 1 1 A A A A A A A A A 27,35 30,55 35,30 38,50 41,65 44,80 49,60 52,75 55,95 24,20 27,35 32,15 35,30 38,50 41,65 46,40 49,60 52,75 17,78 17,78 17,78 17,78 17,78 17,78 19,43 19,43 19,43 2,85 2,85 2,85 2,85 2,85 2,85 3,70 3,70 3,70 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 12,70 15,85 19,05 22,20 25,40 26,95 30,15 33,30 36,50 36,85 36,85 36,85 36,85 36,85 36,85 38,40 38,40 38,40 30,85 30,85 30,85 30,85 30,85 30,85 32,35 32,35 32,35 19,20 22,37 27,12 30,30 33,47 36,67 39,82 43,02 46,17 7,75 10,29 13,49 16,89 20,07 22,07 25,25 28,42 31,60 Olive Drab Cadmium Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 5324 5324 5324 5324 5324 5324 5324 5324 5324 Mounting styles Size E Panel cutout H K Overall (as per accessory) 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* Panel nut Size Panel Nut Reference Olive drab Nickel Cadmium 08 10 12 14 16 18 20 22 24 006-0980-08 006-0980-10 006-0980-12 006-0980-14 006-0980-16 006-0980-18 006-0980-20 006-0980-22 006-0980-24 A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 08 10 12 14 16 18 20 22 24 08 10 12 14 16 18 20 22 24 For single hole mounting receptacle 12 H +0 - 0,2 +0 - 0,2 torque 4,30 4,30 4,30 4,30 4,30 4,30 6,35 6,35 6,35 14,65 17,80 22,55 25,70 28,90 32,05 35,25 38,40 41,60 13,85 17,05 21,15 24,30 27,45 30,65 33,80 37,00 40,15 7,5 10 13 15 18 21 23 26 29 O'ring panel Size 499 499 499 499 499 499 499 499 499 E max. Reference 103-0001-16-02 103-0001-18-02 103-0001-21-02 103-0001-23-02 103-0001-25-02 103-0001-27-02 103-0001-29-02 103-0001-30-02 103-0001-31-02 K Tightening mN mN mN mN mN mN mN mN mN AFD Receptacles Single hole mounting * With straight cable clamp L G max. J mini. J1 max. L max. Olive Drab Cadmium Plating Reference 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 45,85 45,85 45,85 51,85 51,85 51,85 53,35 53,35 53,35 AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD J1 J G O tightened clamps O allowed cable o * With 90 end bell cable clamp L T J1 J 059 059 059 059 059 059 059 059 059 J1 max. L max. T max. Olive Drab Cadmium Plating Reference 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 49,30 51,65 54,10 57,35 60,75 64,20 69,05 72,15 75,25 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 AFD AFD AFD AFD AFD AFD AFD AFD AFD L AFD AFD AFD AFD AFD AFD AFD AFD AFD J G O allowed cable * Fitting for thermo-shrink sleeve 081 081 081 081 081 081 081 081 081 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* Nickel Plating Reference L O allowed cable 5347 5347 5347 5347 5347 5347 5347 5347 5347 J mini. Nickel Plating Reference 3,30 mini. A A A A A A A A A G max. * With potting cup J P G 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD G O tightened clamps O allowed cable Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 315 315 315 315 315 315 315 315 315 083 083 083 083 083 083 083 083 083 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 5543 5543 5543 5543 5543 5543 5543 5543 5543 G max. J mini. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 4,60 6,60 10,00 11,50 15,30 17,30 20,50 23,70 26,80 44,70 44,70 44,70 50,20 50,20 50,20 51,70 51,70 51,70 AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 5629 5629 5629 5629 5629 5629 5629 5629 5629 G max. J max. L max. P max. S max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,50 9,20 12,65 14,50 17,70 19,70 22,90 26,05 29,00 46,55 46,55 46,55 46,55 46,55 46,55 50,35 51,00 51,00 13,55 15,40 19,70 21,30 24,50 26,50 30,95 34,45 36,65 7,80 7,80 7,80 7,80 7,80 7,80 10,08 10,65 10,65 AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 5563 5563 5563 5563 5563 5563 5563 5563 5563 S * With grounding adaptor Nickel Plating Reference L J O allowed cable G AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 564 564 564 564 564 564 564 564 564 G max. J mini. L max. Olive Drab Cadmium Plating Reference 18,00 20,10 24,40 27,50 30,85 33,90 37,10 40,20 43,40 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 65,90 65,70 65,60 65,80 65,60 64,90 67,25 67,35 68,00 AFD AFD AFD AFD AFD AFD AFD AFD AFD 54-08-**-P/S-* 54-10-**-P/S-* 54-12-**-P/S-* 54-14-**-P/S-* 54-16-**-P/S-* 54-18-**-P/S-* 54-20-**-P/S-* 54-22-**-P/S-* 54-24-**-P/S-* A A A A A A A A A 5534 5534 5534 5534 5534 5534 5534 5534 5534 Note : L dimension calculated for a braid of 1 m/m thickness 13 AFD Plugs Plugs 31,20 max. 37,10 max. F G1 P G F 4,60 max. With backshell Nickel plating without Mod. Olive drab cadmium plating Mod. A 231 Without backshell Nickel plating Mod. 1A Olive drab cadmium plating Mod. A 5324 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* - 1 1 1 1 1 1 1 1 1 A A A A A A A A A F max. G max. G1 max. P max. 19,75 22,70 26,45 29,95 32,95 35,30 38,85 42,05 45,05 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 12,70 15,85 19,05 22,20 25,40 26,95 30,15 33,30 36,50 7,75 10,29 13,49 16,89 20,07 22,07 25,25 28,42 31,60 14 Olive Drab Cadmium Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 5324 5324 5324 5324 5324 5324 5324 5324 5324 AFD Plugs * With straight cable clamp L G J J1 O tightened clamps O allowed cable o * With 90 end bell cable clamp L G T J1 J O tightened clamps O allowed cable Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 46,10 46,10 46,10 52,10 52,10 52,10 52,10 52,10 52,10 AFD AFD AFD AFD AFD AFD AFD AFD AFD T max. Olive Drab Cadmium Plating Reference 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 49,55 51,90 55,35 57,60 61,00 64,45 67,80 70,90 74,00 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD O allowed cable * Fitting for thermo-shrink sleeve 3,30 mini. S O allowed cable 081 081 081 081 081 081 081 081 081 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* * With grounding adaptor L 5347 5347 5347 5347 5347 5347 5347 5347 5347 L max. AFD AFD AFD AFD AFD AFD AFD AFD AFD P J A A A A A A A A A J1 max. Nickel Plating Reference L 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* J mini. G J O allowed cable J1 max. G max. L G J 059 059 059 059 059 059 059 059 059 J mini. Nickel Plating Reference * With potting cup G 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* G max. A A A A A A A A A 315 315 315 315 315 315 315 315 315 A A A A A A A A A 5543 5543 5543 5543 5543 5543 5543 5543 5543 G max. J mini. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 4,60 6,60 10,00 11,50 15,30 17,30 20,50 23,70 26,80 45,45 45,45 45,45 50,95 50,95 50,95 50,95 50,95 50,95 AFD AFD AFD AFD AFD AFD AFD AFD AFD 083 083 083 083 083 083 083 083 083 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* A A A A A A A A A 5629 5629 5629 5629 5629 5629 5629 5629 5629 G max. J max. L max. P max. S max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,50 9,20 12,65 14,50 17,70 19,70 22,90 26,05 29,00 46,80 46,80 46,80 46,80 46,80 46,80 49,10 49,75 49,75 13,55 15,40 19,70 21,30 24,50 26,50 30,95 34,45 36,65 7,80 7,80 7,80 7,80 7,80 7,80 10,08 10,65 10,65 AFD AFD AFD AFD AFD AFD AFD AFD AFD Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* A A A A A A A A A 564 564 564 564 564 564 564 564 564 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* A A A A A A A A A 5563 5563 5563 5563 5563 5563 5563 5563 5563 G max. J mini. L max. Olive Drab Cadmium Plating Reference 18,00 20,10 24,40 27,50 30,85 33,90 37,10 40,20 43,40 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 66,20 66,00 65,90 66,10 65,90 65,20 66,00 66,10 66,75 AFD AFD AFD AFD AFD AFD AFD AFD AFD 56-08-**-P/S-* 56-10-**-P/S-* 56-12-**-P/S-* 56-14-**-P/S-* 56-16-**-P/S-* 56-18-**-P/S-* 56-20-**-P/S-* 56-22-**-P/S-* 56-24-**-P/S-* A A A A A A A A A 5534 5534 5534 5534 5534 5534 5534 5534 5534 Note : L dimension calculated for a braid of 1 m/m thickness 15 AFD Plugs * With RFI fingers 31,20 max. 37,10 max. F G1 P G F 4,60 max. Without backshell Nickel plating Mod. 1A Olive drab cadmium plating Mod. A 5324 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* - 1 1 1 1 1 1 1 1 1 A A A A A A A A A F max. G max. G1 max. P max. 19,75 22,70 26,45 29,95 32,95 35,30 38,85 42,05 45,05 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 12,70 15,85 19,05 22,20 25,40 26,95 30,15 33,30 36,50 7,75 10,29 13,49 16,89 20,07 22,07 25,25 28,42 31,60 16 With backshell Nickel plating without Mod. Olive drab cadmium plating Mod. A 231 Olive Drab Cadmium Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 5324 5324 5324 5324 5324 5324 5324 5324 5324 AFD Plugs * With straight cable clamp L G J J1 O tightened clamps O allowed cable o * With 90 end bell cable clamp L G T J1 O allowed cable J O tightened clamps Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* AFD AFD AFD AFD AFD AFD AFD AFD AFD G J O allowed cable * Fitting for thermo-shrink sleeve L P J 3,30 mini. S O allowed cable J1 max. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 46,10 46,10 46,10 52,10 52,10 52,10 52,10 52,10 52,10 AFD AFD AFD AFD AFD AFD AFD AFD AFD Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* L A A A A A A A A A 315 315 315 315 315 315 315 315 315 A A A A A A A A A 5347 5347 5347 5347 5347 5347 5347 5347 5347 J mini. J1 max. L max. T max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 49,55 51,90 55,35 57,60 61,00 64,45 67,80 70,90 74,00 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 AFD AFD AFD AFD AFD AFD AFD AFD AFD 083 083 083 083 083 083 083 083 083 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 5543 5543 5543 5543 5543 5543 5543 5543 5543 G max. J mini. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 4,60 6,60 10,00 11,50 15,30 17,30 20,50 23,70 26,80 45,45 45,45 45,45 50,95 50,95 50,95 50,95 50,95 50,95 AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 5629 5629 5629 5629 5629 5629 5629 5629 5629 G max. J max. L max. P max. S max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,50 9,20 12,65 14,50 17,70 19,70 22,90 26,05 29,00 46,80 46,80 46,80 46,80 46,80 46,80 49,10 49,75 49,75 13,55 15,40 19,70 21,30 24,50 26,50 30,95 34,45 36,65 7,80 7,80 7,80 7,80 7,80 7,80 10,08 10,65 10,65 AFD AFD AFD AFD AFD AFD AFD AFD AFD Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* G max. 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* * With grounding adaptor O allowed cable 081 081 081 081 081 081 081 081 081 J mini. Nickel Plating Reference L G J 059 059 059 059 059 059 059 059 059 Nickel Plating Reference * With potting cup G 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* G max. 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 564 564 564 564 564 564 564 564 564 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 5563 5563 5563 5563 5563 5563 5563 5563 5563 G max. J mini. L max. Olive Drab Cadmium Plating Reference 18,00 20,10 24,40 27,50 30,85 33,90 37,10 40,20 43,40 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 66,20 66,00 65,90 66,10 65,90 65,20 66,00 66,10 66,75 AFD AFD AFD AFD AFD AFD AFD AFD AFD 57-08-**-P/S-* 57-10-**-P/S-* 57-12-**-P/S-* 57-14-**-P/S-* 57-16-**-P/S-* 57-18-**-P/S-* 57-20-**-P/S-* 57-22-**-P/S-* 57-24-**-P/S-* A A A A A A A A A 5534 5534 5534 5534 5534 5534 5534 5534 5534 Note : L dimension calculated for a braid of 1 m/m thickness 17 AFD Large receptacles B Large square flange receptacle L1 L D C E D E C F G F P 4 holes O 3,81 0,15 4,80 max. With backshell Nickel plating without Mod. Olive drab cadmium plating Mod. A 231 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* - 1 1 1 1 1 1 1 1 1 A A A A A A A A A Without backshell Nickel plating Mod. 1A Olive drab cadmium plating Mod. A 5324 B max. C D E 0,1 0,15 max. F max. G max. G1 max. L max. L1 max. P max. Olive Drab Cadmium Plating Reference 27,05 28,95 32,15 34,50 36,90 38,90 42,85 44,85 48,00 18,64 20,62 23,82 26,22 28,56 30,58 32,96 34,96 38,10 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 12,70 15,85 19,05 22,20 25,40 26,95 30,15 33,30 36,50 36,85 36,85 36,85 36,85 36,85 36,85 38,40 38,40 38,40 30,85 30,85 30,85 30,85 30,85 30,85 32,35 32,35 32,35 7,75 10,29 13,49 16,89 20,07 22,07 25,25 28,42 31,60 AFD AFD AFD AFD AFD AFD AFD AFD AFD 11,89 11,89 11,89 11,89 11,89 11,89 14,30 14,30 15,37 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 231 231 231 231 231 231 231 231 231 A A A A A A A A A 5324 5324 5324 5324 5324 5324 5324 5324 5324 Mounting styles E With flat gasket Panel cutout C Size 08 10 12 14 16 18 20 22 24 H C 4 holes O 3,81 0,15 E Overall (as per accessory) B G1 C H E 0,1 +0 - 0,2 max. 18,64 20,62 23,82 26,22 28,56 30,58 32,96 34,96 38,10 16,05 19,00 22,25 25,40 28,60 31,75 34,90 38,10 41,30 2,50 2,50 2,50 2,50 2,50 2,50 5,40 5,40 5,40 Flat gasket for square flange receptacle E B C With flat gasket C H 4 holes O 3,81 0,15 E Front Flange Mounting Size Reference H max. B max. C 0,1 E max. 08 10 12 14 16 18 20 22 24 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,75 34,92 2,50 2,50 2,50 2,50 2,50 2,50 5,40 5,40 5,40 108-0003-08-A 108-0003-10-A 108-0001-12-A 108-0001-14-A 108-0001-16-A 108-0003-18-A 108-0003-20-A 108-0003-22-A 108-0003-24-A 624 624 624 624 624 624 624 624 624 12,50 15,40 19,50 22,70 25,90 29,10 32,30 35,40 38,60 B 18 Rear Flange Mounting H Reference Size max. 13,20 16,40 19,50 22,70 25,90 27,50 30,60 33,50 37,00 108-0001-08-A 108-0001-10-A 108-0001-12-A 108-0001-14-A 108-0001-16-A 108-0001-18-A 108-0001-20-A 108-0001-22-A 108-0001-24-A 624 624 624 624 624 624 624 624 624 08 10 12 14 16 18 20 22 24 A 624 = Flat gasket resistant to oronite AFD Large receptacles Large square flange * With straight cable clamp Nickel Plating Reference L AFD AFD AFD AFD AFD AFD AFD AFD AFD J1 J G O tightened clamps O allowed cable o * With 90 end bell cable clamp AFD AFD AFD AFD AFD AFD AFD AFD AFD G T J1 O allowed cable J 059 059 059 059 059 059 059 059 059 Nickel Plating Reference L O tightened clamps 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* * With potting cup 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* 081 081 081 081 081 081 081 081 081 G max. J mini. J1 max. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 45,85 45,85 45,85 51,85 51,85 51,85 53,35 53,35 53,35 AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD AFD J G O allowed cable * Fitting for thermo-shrink sleeve L J P G 3,30 mini. O allowed cable S AFD AFD AFD AFD AFD AFD AFD AFD AFD 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* * With grounding adaptor J1 max. L max. T max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 49,30 51,65 54,10 57,35 60,75 64,20 69,05 72,15 75,25 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 AFD AFD AFD AFD AFD AFD AFD AFD AFD 315 315 315 315 315 315 315 315 315 083 083 083 083 083 083 083 083 083 J G AFD AFD AFD AFD AFD AFD AFD AFD AFD 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 5543 5543 5543 5543 5543 5543 5543 5543 5543 G max. J mini. L max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 4,60 6,60 10,00 11,50 15,30 17,30 20,50 23,70 26,80 44,70 44,70 44,70 50,20 50,20 50,20 51,70 51,70 51,70 AFD AFD AFD AFD AFD AFD AFD AFD AFD 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 5629 5629 5629 5629 5629 5629 5629 5629 5629 G max. J mini. L max. P max. S max. Olive Drab Cadmium Plating Reference 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,50 9,20 12,65 14,50 17,70 19,70 22,90 26,05 29,00 46,55 46,55 46,55 46,55 46,55 46,55 50,35 51,00 51,00 13,55 15,40 19,70 21,30 24,50 26,50 30,95 34,45 36,65 7,80 7,80 7,80 7,80 7,80 7,80 10,08 10,65 10,65 AFD AFD AFD AFD AFD AFD AFD AFD AFD Nickel Plating Reference L O allowed cable A A A A A A A A A 5347 5347 5347 5347 5347 5347 5347 5347 5347 J mini. 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* Nickel Plating Reference A A A A A A A A A G max. Nickel Plating Reference L 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 564 564 564 564 564 564 564 564 564 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 5563 5563 5563 5563 5563 5563 5563 5563 5563 G max. J mini. L max. Olive Drab Cadmium Plating Reference 18,00 20,10 24,40 27,50 30,85 33,90 37,10 40,20 43,40 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 65,90 65,70 65,60 65,80 65,60 64,90 67,25 67,35 68,00 AFD AFD AFD AFD AFD AFD AFD AFD AFD 58-08-**-P/S-* 58-10-**-P/S-* 58-12-**-P/S-* 58-14-**-P/S-* 58-16-**-P/S-* 58-18-**-P/S-* 58-20-**-P/S-* 58-22-**-P/S-* 58-24-**-P/S-* A A A A A A A A A 5534 5534 5534 5534 5534 5534 5534 5534 5534 Note : L dimension calculated for a braid of 1 m/m thickness 19 AFD Cable connecting receptacles With backshell B L E D G F B A Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 51-08-**-P/S-* 51-10-**-P/S-* 51-12-**-P/S-* 51-14-**-P/S-* 51-16-**-P/S-* 51-18-**-P/S-* 51-20-**-P/S-* 51-22-**-P/S-* 51-24-**-P/S-* A max. B D E max. 0,15 max. F max. G max. L max. Olive Drab Cadmium Plating Reference 24,15 27,30 29,70 32,05 34,45 36,85 40,00 43,20 46,30 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 36,85 36,85 36,85 36,85 36,85 36,85 38,40 38,40 38,40 AFD AFD AFD AFD AFD AFD AFD AFD AFD 11,13 11,13 11,13 11,13 11,13 11,13 14,30 14,30 15,10 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 51-08-**-P/S-* 51-10-**-P/S-* 51-12-**-P/S-* 51-14-**-P/S-* 51-16-**-P/S-* 51-18-**-P/S-* 51-20-**-P/S-* 51-22-**-P/S-* 51-24-**-P/S-* A A A A A A A A A 231 231 231 231 231 231 231 231 231 With straight cable clamp B L D J Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 51-08-**-P/S-*51-10-**-P/S-*51-12-**-P/S-*51-14-**-P/S-*51-16-**-P/S-*51-18-**-P/S-*51-20-**-P/S-*51-22-**-P/S-*51-24-**-P/S-*- 059 059 059 059 059 059 059 059 059 J1 F B A E G O tightened clamps O allowed cable A max. B D E max. 0,15 max. F max. G max. J mini. J1 max. L max. Olive Drab Cadmium Plating Reference 24,15 27,30 29,70 32,05 34,45 36,85 40,00 43,20 46,30 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 15,65 18,60 21,75 24,95 28,20 30,90 34,15 37,25 40,45 6,80 9,30 12,75 14,65 17,80 19,80 23,00 26,15 29,10 5,15 7,25 10,55 12,05 15,85 17,90 21,05 24,25 27,45 45,85 45,85 45,85 51,85 51,85 51,85 53,35 53,35 53,35 AFD AFD AFD AFD AFD AFD AFD AFD AFD 11,13 11,13 11,13 11,13 11,13 11,13 14,30 14,30 15,10 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 20 51-08-**P/S-*-A 51-10-**P/S-*-A 51-12-**P/S-*-A 51-14-**P/S-*-A 51-16-**P/S-*-A 51-18-**P/S-*-A 51-20-**P/S-*-A 51-22-**P/S-*-A 51-24-**P/S-*-A 5347 5347 5347 5347 5347 5347 5347 5347 5347 AFD Mating and unmating dimensions AFD 56 / AFD 50 L1 L1 K E Panel thickness (with flat gasket) Size E max. K max. L max. L' max. L1 max. L1' max. 08 to 18 20 to 22 24 2,50 5,40 5,40 23,85 21,45 20,65 48,10 52,60 53,40 50,10 55,15 55,95 38,70 43,30 44,10 40,70 45,85 46,65 Size E max. K max. L max. L1 max. 08 to 18 20 to 24 4,30 6,35 16,30 15,35 54,75 56,40 45,45 47,10 Mated position Unmated position L E Panel thickness (with flat gasket) L' AFD 56 / AFD 54 L1 Mated Position Unmated Position E Panel thickness L K 21 AFD Accessories Backshell Size 08 10 12 14 16 18 20 22 24 08 10 12 14 16 18 20 22 24 94002-08-A 94002-10-A 94002-12-A 94002-14-A 94002-16-A 94002-18-A 94002-20-A 94002-22-A 94002-24-A 231 231 231 231 231 231 231 231 231 Nickel Plating Reference 94003-08-3014 94003-10-3014 94003-12-3014 94003-14-3014 94003-16-3014 94003-18-3014 94003-20-3014 94003-22-3014 94003-24-3014 Olive Drab Cadmium Reference 94003-08-A 94003-10-A 94003-12-A 94003-14-A 94003-16-A 94003-18-A 94003-20-A 94003-22-A 94003-24-A 231 231 231 231 231 231 231 231 231 90o end bell cable clamp Size 08 10 12 14 16 18 20 22 24 94002-08-3014 94002-10-3014 94002-12-3014 94002-14-3014 94002-16-3014 94002-18-3014 94002-20-3014 94002-22-3014 94002-24-3014 Olive Drab Cadmium Reference Straight cable clamp Size Nickel Plating Reference Nickel Plating Reference 94004-08-3014 94004-10-3014 94004-12-3014 94004-14-3014 94004-16-3014 94004-18-3014 94004-20-3014 94004-22-3014 94004-24-3014 Olive Drab Cadmium Reference 94004-08-A 94004-10-A 94004-12-A 94004-14-A 94004-16-A 94004-18-A 94004-20-A 94004-22-A 94004-24-A 231 231 231 231 231 231 231 231 231 Potting cup Size 08 10 12 14 16 18 20 22 24 22 Nickel Plating Reference 006-0701-08-A 006-0701-10-A 006-0701-12-A 006-0701-14-A 006-0701-16-A 006-0701-18-A 006-0701-20-A 006-0701-22-A 006-0701-24-A 499 499 499 499 499 499 499 499 499 Olive Drab Cadmium Reference 006-0701-08-A 006-0701-10-A 006-0701-12-A 006-0701-14-A 006-0701-16-A 006-0701-18-A 006-0701-20-A 006-0701-22-A 006-0701-24-A 231 231 231 231 231 231 231 231 231 AFD Accessories Thermo-shrink sleeve Size Nickel Plating Reference 004-0062-08-A 004-0062-10-A 004-0062-12-A 004-0062-14-A 004-0062-16-A 004-0062-18-A 004-0062-20-A 004-0062-22-A 004-0062-24-A 08 10 12 14 16 18 20 22 24 499 499 499 499 499 499 499 499 499 Olive Drab Cadmium Reference 004-0062-08-A 004-0062-10-A 004-0062-12-A 004-0062-14-A 004-0062-16-A 004-0062-18-A 004-0062-20-A 004-0062-22-A 004-0062-24-A 231 231 231 231 231 231 231 231 231 Grounding adaptor Size Nickel Plating Reference 014-1048-08-A 014-1048-10-A 014-1048-12-A 014-1048-14-A 014-1048-16-A 014-1048-18-A 014-1048-20-A 014-1048-22-A 014-1048-24-A 08 10 12 14 16 18 20 22 24 Dummy receptacle for plugs B C L E C B F 4 holes O 3,15 0,15 size 08 to 22 4 holes O 3,73 0,15 size 24 Nickel Plating Reference AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-PR-08 50-PR-10 50-PR-12 50-PR-14 50-PR-16 50-PR-18 50-PR-20 50-PR-22 50-PR-24 B max. C 0,1 E max. F max. L Olive Drab Cadmium max. Plating Reference 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,76 34,92 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,70 14,70 14,70 14,70 14,70 14,70 17,20 17,20 17,20 23 AFD AFD AFD AFD AFD AFD AFD AFD AFD 50-PR-08-A 50-PR-10-A 50-PR-12-A 50-PR-14-A 50-PR-16-A 50-PR-18-A 50-PR-20-A 50-PR-22-A 50-PR-24-A 231 231 231 231 231 231 231 231 231 499 499 499 499 499 499 499 499 499 Olive Drab Cadmium Reference 014-1048-08-A 014-1048-10-A 014-1048-12-A 014-1048-14-A 014-1048-16-A 014-1048-18-A 014-1048-20-A 014-1048-22-A 014-1048-24-A 231 231 231 231 231 231 231 231 231 AFD Protective covers For receptacle mounting on square flange receptacle Overall length after mating Size 08 to 22 - 10,15 max. Size 24 - 10,30 max. Overall length after mating Size 08 to 22 - 10,15 max. Size 24 - 10,30 max. L O 4,10 mini. L O 4,10 mini. F F L1 L2 P P Nickel Plating Reference F Nylon braid Stainless chain max. L max. L1 5 L2 max. P max. AFD AFD AFD AFD AFD AFD AFD AFD AFD 17,85 17,85 17,85 17,85 17,85 17,85 17,85 17,85 18,85 130,00 130,00 130,00 130,00 142,00 142,00 142,00 142,00 142,00 79,00 79,00 95,00 95,00 95,00 95,00 111,00 111,00 111,00 14,20 14,20 14,20 14,20 14,20 14,20 14,20 14,20 15,20 B B B B B B B B B 50-08 50-10 50-12 50-14 50-16 50-18 50-20 50-22 50-24 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 50-08 50-10 50-12 50-14 50-16 50-18 50-20 50-22 50-24 16,60 19,70 24,60 27,80 30,90 34,10 37,30 40,50 44,10 Olive Drab Cadmium Reference Nylon braid Stainless chain AFD AFD AFD AFD AFD AFD AFD AFD AFD B B B B B B B B B 50-0850-1050-1250-1450-1650-1850-2050-2250-24- A A A A A A A A A 231 231 231 231 231 231 231 231 231 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 50-08-A 50-10-A 50-12-A 50-14-A 50-16-A 50-18-A 50-20-A 50-22-A 50-24-A 231 231 231 231 231 231 231 231 231 For receptacle mounting on single hole mounting G Overall length after mating Size 08 to 22 - 10,15 max. Size 24 - 10,30 max. Overall length after mating Size 08 to 22 - 10,15 max. Size 24 - 10,30 max. G L L F F L2 L1 P P Nickel Plating Reference Nylon braid Stainless chain F max. G mini. L max. L1 5 L2 max. P max. AFD AFD AFD AFD AFD AFD AFD AFD AFD 16,60 19,70 24,60 27,80 30,90 34,10 37,30 40,50 44,10 14,60 17,70 22,50 25,70 28,90 32,00 35,20 38,40 41,60 17,85 17,85 17,85 17,85 17,85 17,85 17,85 17,85 18,85 130,00 130,00 130,00 130,00 142,00 142,00 142,00 142,00 142,00 79,00 79,00 95,00 95,00 95,00 95,00 111,00 111,00 111,00 14,20 14,20 14,20 14,20 14,20 14,20 14,20 14,20 15,20 B B B B B B B B B 50-54-08 50-54-10 50-54-12 50-54-14 50-54-16 50-54-18 50-54-20 50-54-22 50-54-24 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 50-54-08 50-54-10 50-54-12 50-54-14 50-54-16 50-54-18 50-54-20 50-54-22 50-54-24 24 Olive Drab Cadmium Reference Nylon braid Stainless chain AFD AFD AFD AFD AFD AFD AFD AFD AFD B B B B B B B B B 50-54-0850-54-1050-54-1250-54-1450-54-1650-54-1850-54-2050-54-2250-54-24- A A A A A A A A A 231 231 231 231 231 231 231 231 231 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 50-54-08-A 50-54-10-A 50-54-12-A 50-54-14-A 50-54-16-A 50-54-18-A 50-54-20-A 50-54-22-A 50-54-24-A 231 231 231 231 231 231 231 231 231 AFD Protective covers For plug attached to cable clamp Overall length after mating Size 08 to 22 - 9,60 max. Size 24 - 10,45 max. Overall length after mating Size 08 to 22 - 9,60 max. Size 24 - 10,45 max. L O 4,10 mini. L O 4,10 mini. B A F F L1 L2 P P Nickel Plating Reference Nylon braid Stainless chain A max. B max. F max. L max. L1 5 L2 max. P max. AFD AFD AFD AFD AFD AFD AFD AFD AFD 18,30 21,50 25,40 28,60 31,80 34,90 38,10 41,30 44,50 16,10 18,10 22,10 24,10 27,10 30,10 33,10 36,10 41,10 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 18,65 18,65 18,65 18,65 18,65 18,65 20,25 20,25 21,10 130,00 130,00 130,00 130,00 142,00 142,00 142,00 142,00 142,00 95,00 95,00 111,00 111,00 111,00 111,00 127,00 127,00 127,00 14,40 14,40 14,40 14,40 14,40 14,40 16,00 16,00 16,80 B B B B B B B B B 56-08 56-10 56-12 56-14 56-16 56-18 56-20 56-22 56-24 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 56-08 56-10 56-12 56-14 56-16 56-18 56-20 56-22 56-24 Olive Drab Cadmium Reference Nylon braid Stainless chain AFD AFD AFD AFD AFD AFD AFD AFD AFD B B B B B B B B B 56-08-A 56-10-A 56-12-A 56-14-A 56-16-A 56-18-A 56-20-A 56-22-A 56-24-A 231 231 231 231 231 231 231 231 231 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 56-08-A 56-10-A 56-12-A 56-14-A 56-16-A 56-18-A 56-20-A 56-22-A 56-24-A 231 231 231 231 231 231 231 231 231 For plug attached for plug G G Overall length after mating Size 08 to 22 - 9,60 max. Size 24 - 10,45 max. Overall length after mating Size 08 to 22 - 9,60 max. Size 24 - 10,45 max. L L B A F F L1 L2 P Nickel Plating Reference Nylon braid Stainless chain A max. AFD AFD AFD AFD AFD AFD AFD AFD AFD 18,30 21,50 25,40 28,60 31,80 34,90 38,10 41,30 44,50 B B B B B B B B B 56-56-08 56-56-10 56-56-12 56-56-14 56-56-16 56-56-18 56-56-20 56-56-22 56-56-24 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 56-56-08 56-56-10 56-56-12 56-56-14 56-56-16 56-56-18 56-56-20 56-56-22 56-56-24 B max. 16,10 18,10 22,10 24,10 27,10 30,10 33,10 36,10 41,10 P F max. 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 G mini. 12,45 15,70 18,85 22,10 25,50 27,35 30,40 33,30 36,80 L max. 18,65 18,65 18,65 18,65 18,65 18,65 20,25 20,25 21,10 25 L1 5 L2 max. 130,00 79,00 130,00 79,00 130,00 95,00 130,00 95,00 142,00 95,00 142,00 95,00 142,00 111,00 142,00 111,00 142,00 111,00 P max. 14,40 14,40 14,40 14,40 14,40 14,40 16,00 16,00 16,80 Olive Drab Cadmium Reference Nylon braid Stainless chain AFD AFD AFD AFD AFD AFD AFD AFD AFD B B B B B B B B B 56-56-08-A 56-56-10-A 56-56-12-A 56-56-14-A 56-56-16-A 56-56-18-A 56-56-20-A 56-56-22-A 56-56-24-A 231 231 231 231 231 231 231 231 231 AFD AFD AFD AFD AFD AFD AFD AFD AFD C C C C C C C C C 56-56-08-A 56-56-10-A 56-56-12-A 56-56-14-A 56-56-16-A 56-56-18-A 56-56-20-A 56-56-22-A 56-56-24-A 231 231 231 231 231 231 231 231 231 AFD Contacts ans tools Female contact Male contact 2 Wire strip length 1 1 2 4 to 5 mm CONTACTS Commercial reference Codified Former code CABLES Type AWG Index size Remarks Color code 1 2 Section in mm2 AWG wire O over sheath 006-0937-20 A 006-0912-20 A 0641-10-2059 C 0603-34-2059 C P S 20 - - red red 0,22 to 0,60 20 to 24 1,01 to 2,10 006-0972-20 A 006-0973-20 A 0641-24-2059 C 0603-21-2059 C P S 20 - reduced bucket contact red black 0,055 to 0,15 26 to 30 1,01 to 2,10 006-0044-20 A 006-0055-20 A DF 06-044-20 C DF 06-A 055-20 C P S 20 - enlarged bucket contact red purple 0,38 to 0,93 18 to 22 1,01 to 2,10 0641-14-2000 0603-16-2000 P S 20 - chromel contact mark Ch 0,22 to 0,60 20 to 24 1,01 to 2,10 20 - mark Ch 0,38 to 0,93 18 to 22 1,01 to 2,10 0641-15-2000 0603-15-2000 P S P S 20 - mark Al 0,38 to 0,93 18 to 22 1,01 to 2,10 20 - mark Al 0,38 to 0,93 18 to 22 1,01 to 2,10 20 - 20 - 16 006-0982-20 006-0985-20 025-0404-20 025-0405-20 006-0983-20 006-0984-20 025-0402-20 025-0403-20 006-1060-20 006-1062-20 P S P S 025-0406-20 025-0407-20 006-0937-16 A 006-0912-16 A P S P S 0641-12-1659 C 0603-33-1659 C chromel contact alumel contact alumel contact constantan contact - - 0,22 to 0,60 20 to 24 1,01 to 2,10 constantan contact - - 0,38 to 0,93 18 to 22 1,01 to 2,10 - - blue blue 0,60 to 1,34 16 to 20 1,35 to 2,62 006-1102-16 A 006-1104-16 A P S 16 - enlarged bucket contact blue orange 1,91 14 1,35 to 2,62 025-0870-16 A 025-0871-16 A P S 16 - reduced bucket contact blue black 0,055 to 0,15 26 to 30 1,35 to 2,62 109 026-16 109 027-16 P S 16 - reduced bucket contact blue red 0,22 to 0,60 20 to 24 1,01 to 2,10 006-0937-12 A 006-0912-12 A 0641-32-1259 C 0603-32-1259 C P S 12 - - yellow yellow 1,91 to 3,18 12 to 14 2,51 to 4,01 006-1157-12 A 006-1159-12 A 109 028 A 109 029 A P S 12 - reduced bucket contact yellow blue 0,60 to 1,34 16 to 20 1,34 to 2,61 005-0893-08 005-0896-08 101 -333-59 101 -334-59 P S 8 8 - - - 5,30 to 8,98 8 to 10 3,80 to 5,15 005-0257-08 005-0258-08 DF 05-257-08 DF 05-258-08 P S 8 87 reduced bucket contact - - 5,30 10 3,80 to 5,15 006-0041-08 006-0040-08 DF 06-A 041-08 DF 06-A 040-08 P S 8 88 - - - 8,98 8 3,80 to 5,15 006-1168-16 006-1169-16 Note : Standard contacts supplied with connector Reference to be order 26 AFD Contacts ans tools 4 3 Connector rear face 5 8 7 6 TOOLS Sealing plug Insertion and extraction tool Crimping tool Extraction tool non wired contacts Reference Color Reference Turret Wired contacts Reference Alternate end 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 4113-4-2001 red 057-0461-00 057-0462-00 M 15570-20 M 15571 105910 0613-1-1601 blue 057-0461-00 057-0462-00 M 15570-16 M 15571 105911 0613-1-1601 blue 057-0461-00 057-0462-00 M 15570-16 M 15571 105911 0613-1-1601 blue 057-0461-00 057-0462-00 M 15570-16 M 15571 105911 0613-1-1601 blue 057-0461-00 057-0462-00 M 15570-16 M 15571 105911 0613-1-1201 yellow 057-0461-00 057-0462-00 M 15570-12 M 15571 105912 0613-1-1201 yellow 057-0461-00 057-0462-00 M 15570-12 M 15571 105912 0613-4-0000 green 057-0461-00 057-0462-00 M 15570-25 (insertion) M 15515-109 (extraction) - - 0613-4-0000 green 057-0461-00 057-0462-00 M 15570-25 (insertion) M 15515-109 (extraction) - - 0613-4-0000 green 057-0461-00 057-0462-00 M 15570-25 (insertion) M 15515-109 (extraction) - - 27 AFD Contacts ans tools for coax OA J H 27.43 max. G OA 25.91 max. 13.64 17.07 10.68 15.52 CONTACTS Wires used Reference RG RG RG RG RG RG RG RG RG RG 161/U 174/U 178/U 178 A/U 179/U 187/U 188/U 196/U 180/U 195/U Special 50 PPDT Coax contact Male contacts G H J Complete contact Submax. max. max. Index reference assembly reference 2,95 1,52 0,76 Standard 3,94 2,62 0,76 1 2,95 3,90 1,52 0,97 2 0,70 9 F1 Female contacts Inner contact reference O A Complete contact Submm reference assembly reference Inner contact reference OA mm 106467 106469 106472 0,81 106468 106470 106471 0,81 0603-37-0000 106469 106472 0,81 0603-38-0000 106470 106471 0,81 4141-7-2600 106471 0,99 0,81 0603-39-0000 106469 DF 05-A065-00-0059 106469 0107-028-000 0,99 0603-40-0000 106470 106472 0,81 DF 05-A066-00-0059 106470 Note : Standard contacts supplied with connector For wiring of coax contacts imperatively use the Directions for Wiring no NC 025 011* 28 AFD Contacts ans tools for coax OC 3.56 4.70 1.27 OD 2.67 8.13 21.62 O 4.72 9.78 O 4.06 OB O 4.19 OE OF O 3.96 1.78 max. 5.18 O 3.68 O 1.91 COMMON PARTS Grommet reference Insert reference O B Supporting O C OD 0,05 sleeve 0,05 0,02 reference Crimping sleeve reference OE OF 105172 105172 105172 105172 105172 105172 105172 105172 0614-1-0000 0614-1-0000 0614-1-0000 0614-1-0000 0614-1-0000 0614-1-0000 0614-1-0000 0614-1-0000 1,78 1,78 1,78 1,78 1,78 1,78 1,78 1,78 105551 105551 105551 105551 105551 105551 105551 105551 2,36 2,36 2,36 2,36 2,36 2,36 2,36 2,36 105172 0614-1-0001 2,74 105552 105172 105172 0614-1-0000 0614-1-0001 1,78 2,74 105551 DF 05-063-000 Sealing sleeve reference Sealing sleeve reference 1,67 1,67 1,67 1,67 1,67 1,67 1,67 1,67 5121-3-2601 5121-3-2601 5121-3-2601 5121-3-2601 5121-3-2601 5121-3-2601 5121-3-2601 5121-3-2601 3,91 3,91 3,91 3,91 3,91 3,91 3,91 3,91 3,04 3,04 3,04 3,04 3,04 3,04 3,04 3,04 - 100368 100368 100368 100368 100368 100368 100368 100368 3,51 2,74 5121-3-2606 5,13 4,11 - - 2,36 3,51 1,67 2,12 5121-3-2601 0108-002-001 3,91 3,04 5,10 4 207/8 100368 - TOOLS FOR COAX Coax index Standard 1 9 F1 External contact crimping tool Positioner Sleeve crimping tool 057-0463-00 057-0463-00 057-0463-00 057-0463-00 057-0464-00 057-0464-00 057-0464-00 057-0464-00 20053 20052 20053 20055 29 Insertion tool Extraction tool M M M M M M M M 15570-25 15570-25 15570-25 15570-25 15570-25 15570-25 15570-25 15570-25 AFD Bushings For cable clamp Size shell 08 10 12 Main bushing Middle bushing 10 006-0005-08 10 006-0005-10 47.5 O 5.6 10 006-0005-12 006-0006-12 44 14 O 11.1 16 O 11.1 O 7.9 10 006-0005-14 006-0006-14 006-0006-12 006-0006-14 006-0006-12 10 006-0005-16 40.5 18 O 14.3 O 11.1 10 006-0005-18 20 006-0006-14 006-0006-12 006-0006-18 006-0006-14 006-0006-20 006-0006-18 006-0006-22 006-0006-20 37 O 15.9 O 14.3 10 006-0005-20 22 006-0006-18 006-0006-20 33.5 O 19 O 15.9 10 006-0005-22 006-0006-22 30 24 O 23.8 O 19 10 006-0005-24 006-0006-24 30 DBC Part numbering system hermetic DBC Shell type 50 : Square flange mount receptacle 53 : Solder mount receptable 54 : Single hole mount receptable Insert clocking position Normal : N Hermetic version Insert arrangement (see page 8) Manufacturer Deutsch 9 DBC 50 Connector type To MIL-C 26482 G serie 2 H 22 55 P Shell size 08 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Contact type Male contact : P Female contact (consult us) : S 31 N DBC Technical characteristics Mechanical Materials Shell Plating : : : : Type Finish Durability Temperature Air leakage : : : : : Physical Shocks : Insert Insert retention in shell Contacts Steel Tin over nickel plating Compression glass ; silicone gasket The glass can withstand 70 bars of presure differential without loss of mechanical on electrical characteristics Solder type Gold as per MIL-G 45204 500 full coupling and uncoupling cycles - 55 C to + 200 C Leakage inferior to 1 x 10- 7 cm3 / hour under a 1 bar differential pressure 50 G in the 3 axes Electrical Withstanding voltage at sea level in altitude at 15000 m in altitude at 21000 m in altitude at 33000 m Insulation resistance Contacts maximum current Contact millivolt drop : Service 1 : 1500 V 50 Hz (R.M.S) Service 2 : 2300 V 50 Hz (R.M.S) : Service 1 : 500 V Service 2 : 750 V : Service 1 : 375 V Service 2 : 500 V : Service 1 : 200 V Service 2 : 200 V : Higher than 5000 M at 20 C at 65 % R.H : Size 20 : 5 A. Size 16 : 10 A. Size 12 : 17 A. : Size 20 : 75 mv at 5 A. Size 16 : 100 mv at 10 A. Size 12 : 100 mv at 17 A. 32 DBC Hermetic receptacles Square flange receptacle Panel cutout B C C H C Reference DBC DBC DBC DBC DBC DBC DBC DBC DBC G B F 4 holes O 3,15 0,15 size 08 to 22 4 holes O 3,73 0,15 size 24 B C D E F G 6,60 max. L max. 0,1 0,15 max. max. max. max. 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,76 34,92 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,30 17,10 19,90 23,05 26,25 29,40 31,80 34,95 38,15 20,35 20,35 20,35 20,35 20,35 20,35 21,95 22,75 22,75 50H-08-**-P-* 50H-10-**-P-* 50H-12-**-P-* 50H-14-**-P-* 50H-16-**-P-* 50H-18-**-P-* 50H-20-**-P-* 50H-22-**-P-* 50H-24-**-P-* D E C 4 holes O 3,15 0,15 size 08 to 22 4 holes O 3,73 0,15 size 24 L P 14,95 14,95 14,95 14,95 14,95 14,95 16,55 16,55 16,55 1,60 1,60 1,60 1,60 1,60 1,60 2,40 2,40 2,40 P max. Sizes 20 16-12 4,55 4,55 4,55 4,55 4,55 4,55 4,55 3,70 3,70 6,30 6,30 6,30 6,30 6,30 6,30 6,30 5,50 5,50 H +0 - 0,2 14,70 17,50 20,30 23,45 26,65 29,80 32,20 35,35 38,55 Single hole receptacle B P M H D E Panel cutout F K A 4,30 max. size 08 to 18 6,35 max. size 20 to 24 Reference DBC DBC DBC DBC DBC DBC DBC DBC DBC 54H-08-**-P-* 54H-10-**-P-* 54H-12-**-P-* 54H-14-**-P-* 54H-16-**-P-* 54H-18-**-P-* 54H-20-**-P-* 54H-22-**-P-* 54H-24-**-P-* A B D E F H K M +0 - 0,2 max. 20 16-12 13,85 17,05 21,15 24,30 27,45 30,65 33,80 37,00 40,15 19,20 22,37 27,12 30,30 33,47 36,67 39,82 43,02 46,17 3,40 3,40 3,40 3,40 3,40 3,40 2,55 2,55 2,55 5,20 5,20 5,20 5,20 5,20 5,20 2,55 2,55 2,55 max. max. 0,15 max. max. +0 - 0,2 27,35 30,55 35,30 38,50 41,65 44,80 49,60 52,75 55,95 24,20 27,35 32,15 35,30 38,50 41,65 46,40 49,60 52,75 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,65 17,80 22,55 25,70 28,90 32,05 35,25 38,40 41,60 17,78 17,78 17,78 17,78 17,78 17,78 19,43 19,43 20,17 2,85 2,85 2,85 2,85 2,85 2,85 3,70 3,70 3,70 33 P max. Sizes DBC Hermetic receptacles Solder receptacle L P Panel cutout E D1 A H G F 6,60 max. Reference DBC DBC DBC DBC DBC DBC DBC DBC DBC 53H-08-**-P-* 53H-10-**-P-* 53H-12-**-P-* 53H-14-**-P-* 53H-16-**-P-* 53H-18-**-P-* 53H-20-**-P-* 53H-22-**-P-* 53H-24-**-P-* A D1 E F G H max. max. max. max. max. max. 16,15 19,30 21,70 24,90 28,05 31,20 33,60 36,80 40,00 4,00 4,00 4,00 4,00 4,00 4,00 4,00 4,80 4,80 0,90 0,90 0,90 0,90 0,90 0,90 0,90 0,90 0,90 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,30 17,50 19,90 23,45 26,25 29,40 31,80 34,95 38,15 14,70 17,10 20,30 23,05 26,65 29,80 32,20 35,35 38,55 34 L +0 - 0,2 20,35 20,35 20,35 20,35 20,35 20,35 21,95 22,75 22,75 P max. Sizes 20 16-12 4,55 4,55 4,55 4,55 4,55 4,55 4,55 3,70 3,70 6,30 6,30 6,30 6,30 6,30 6,30 6,30 5,50 5,50 CONNECTEURS ELECTRIQUES DEUTSCH 17, rue Lavoisier z.i. n 2 B.P. 117 27091 EVREUX CEDEX 09 (FRANCE) - Tel.: +33 (0)2 32 23 57 00 - Fax : +33 (0)2 32 23 58 00 E-mail : ced@deutsch.net - We b : w w w. d e u t s c h . n e t - Ref.: CC 011-21 E Edition Mars 2008