SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 D D D D D D D D D D, DB, OR N PACKAGE (TOP VIEW) Bi-MOS Technology With TTL and CMOS Compatibility Meets or Exceeds the Requirements of ANSI EIA / TIA-232-E and ITU Recommendation V.28 Very Low Quiescent Current . . . 95 A Typ VCC = 12 V Current-Limited Outputs . . . 10 mA Typ CMOS-and TTL-Compatible Inputs On-Chip Slew Rate Limited to 30 V/s max Flexible Supply Voltage Range Characterized at VCC of 4.5 V and 15 V Functionally Interchangeable With Texas Instruments SN75188, Motorola MC1488, and National Semiconductor DS14C88 VCC - 1A 1Y 2A 2B 2Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC + 4B 4A 4Y 3B 3A 3Y The DB package is only avalable left-end taped and reeled, i.e., order device SN75C188DBLE. description The SN75C188 is a monolithic, low-power, quadruple line driver that interfaces data terminal equipment with data communications equipment. This device is designed to conform to ANSI Standard EIA / TIA-232-E. An external diode in series with each supply-voltage terminal is needed to protect the SN75C188 under certain fault conditions to comply with EIA / TIA-232-E. The SN75C188 is characterized for operation from 0C to 70C. Function Tables DRIVER 1 B Y H L L H DRIVERS 2 - 4 A B Y H H L L X H X L H H = high level, L = low level, X = don't care Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1997, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 logic symbol 1A 2A 2B 3A 3B 4A 4B logic diagram (positive logic) 3 2 4 & 6 5 1Y 1A 2Y 2A 2B 9 8 10 3A 3Y 3B 12 11 13 4A 4Y 4B This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2 3 4 6 5 9 8 10 12 11 13 1Y 2Y 3Y 4Y positive logic Y = A (driver 1) Y = AB or A + B (drivers 2 through 4) schematics of inputs and outputs EACH OUTPUT EACH INPUT VCC + VCC + Internal 1.4-V Ref to GND Input A Input B (drivers 2, 3 and 4 only) (driver 1 only) 160 Output 74 GND GND 72 VCC - VCC - All resistor values shown are nominal. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V Supply voltage, VCC - (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 15 V Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC - to VCC + Output voltage range, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC - - 6 V to VCC + + 6 V Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values are with respect to the network ground terminal. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING D 950 mW 7.6 mW/C 608 mW DB 525 mW 4.2 mW/C 336 mW N 1150 mW 9.2 mW/C 736 mW recommended operating conditions MIN NOM MAX Supply voltage, VCC + 4.5 12 15 V Supply voltage, VCC - - 4.5 - 12 -15 V VCC + V Input voltage, VI VCC - +2 2 High-level Input voltage, VIH Low-level Input voltage, VIL Operating free-air temperature, TA 0 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT V 0.8 V 70 C 3 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 electrical characteristics over operating free-air temperature range, VCC+ = 12 V, VCC- = -12 V (unless otherwise noted) PARAMETER VOH VOL IIH IIL High level output voltage High-level Low-level output voltage g (see Note 2) VIL = 0 0.8 8V V, VIH = 2 V V, RL = 3 k RL = 3 k MIN VCC + = 5 V,, VCC - = - 5 V 4 VCC + = 12 V,, VCC - = - 12 V 10 TYP MAX UNIT V VCC + = 5 V,, VCC - = - 5 V -4 VCC + = 12 V,, VCC - = - 12 V - 10 V 10 A - 10 A Low-level input current VI = 5 V VI = 0 IOS(H) High-level g short-circuit output current VI = 0 0.8 8V V, VO = 0 or VCC - - 5.5 55 - 10 - 19.5 19 5 mA IOS(L) Low-level short-circuit output current VI = 2 V V, VO = 0 or VCC + 55 5.5 10 19 5 19.5 mA rO Output resistance, power off VCC + = 0, VCC - = 0, VI = - 2 V to 2 V VCC + = 5 V,, No load VCC - = - 5 V, 8V All inputs at 2 V or 0 0.8 90 160 VCC + = 12 V,, No load VCC - = - 12 V, All inputs at 2 V or 0 0.8 8V 95 160 VCC + = 5 V,, No load VCC - = - 5 V, 8V All inputs at 2 V or 0 0.8 - 90 - 160 VCC + = 12 V, No load VCC - = - 12 All inputs at 2 V or 0 0.8 8V - 95 - 160 ICC + ICC - High-level input current TEST CONDITIONS Supply current from VCC + Supply current from VCC - 300 A A All typical values are at TA = 25C. Not more than one output should be shorted at a time. NOTE 2: The algebraic convention, in which the more positive (less negative) limit is designated as maximum, is used in this data sheet for logic levels only; e.g., if - 4 V is a maximum, the typical value is a more negative voltage. switching characteristics, VCC+ = 12 V, VCC- = -12 V, TA = 25C PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low- to high-level output Propagation delay time, high- to low-level output tTLH tTHL Transition time, low- to high-level output Transition time, high- to low-level output Transition time, low- to high-level output# tTLH tTHL Transition time, high- to low-level output# Output slew rate RL = 3 k,, See Figure 1 RL = 3 k to 7 k,, See Figure 1 MIN TYP UNIT 3 s 3.5 s 0.53 3.2 s 0.53 3.2 s CL = 15 pF,, CL = 2500 pF,, MAX 1.5 s 1.5 s SR RL = 3 k to 7 k, CL = 15 pF 6 15 30 V/s Measured at the 50% level Measured between the 10% and 90% points on the output waveform # Measured between the 3-V and - 3-V points on the output waveform (EIA / TIA-232-E conditions), all unused inputs tied either high or low 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 PARAMETER MEASUREMENT INFORMATION Input 3V Input 1.5 V 1.5 V 0V Pulse Generator (see Note A) tPHL Output CL (see Note B) RL tPLH VOH 90% 90% 50% 50% 10% 10% Output tTHL TEST CIRCUIT VOL tTLH VOLTAGE WAVEFORMS NOTES: A. The pulse generator has the following characteristics: tw = 25 s, PRR = 20 kHZ, ZO = 50 , tr = tf 50 ns. B. CL includes probe and jig capacitance. Figure 1. Test Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS OUTPUT CURRENT vs OUTPUT VOLTAGE VOLTAGE TRANSFER CHARACTERISTICS 12 VCC = 15 V VCC = 12 V 9 VCC = 9 V 6 VCC = 5 V 20 0 AAA AAA -3 VCC = 5 V -6 VCC = 9 V RL = 3 k TA = 25C 1.2 1.4 1.6 1.8 3-k Load Line 0 -4 VOH (VI = 0.8 V) -8 - 16 - 15 1 4 - 12 VCC = 5 V 0.2 0.4 0.6 0.8 8 AA AA VCC = 12 V -9 0 VOL = (VI = 2 V) 12 3 - 12 VCC = 12 V TA = 25C 16 - Output Current - mA I IO O VVO O - Output Voltage - V 15 - 20 - 16 2 - 12 SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 4 8 12 16 OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 15 12 RL = 3 k VCC = 12 V VOH (VCC = 12 V, VI = 0.8 V) 10 8 IOS(L) VI = 2 V VO = 0 or VCC + 5 VO - Output Voltage - V IOS - Short-Circuit Output Current - mA I OS 0 Figure 3 Figure 2 0 -5 IOS(H) VI = 0.8 V VO = 0 or VCC - - 10 4 VOH (VCC = 5 V, VI = 0.8 V) 0 VOL( VCC = 5 V, VI = 2 V) -4 -8 - 15 0 20 40 60 80 100 120 VOL (VCC = 12 V, VI = 2 V) - 12 0 20 TA - Free-Air Temperature - C 40 60 Figure 5 POST OFFICE BOX 655303 80 100 TA - Free-Air Temperature - C Figure 4 6 -4 VO - Output Voltage - V VI - Input Voltage - V AA AA AA -8 * DALLAS, TEXAS 75265 120 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS INPUT CURRENT vs FREE-AIR TEMPERATURE POWER-OFF OUTPUT RESISTANCE vs FREE-AIR TEMPERATURE 120 500 VCC = 12 V VCC + = VCC - = 0 rro O - Power-off Output Resistance - 100 IIII - Input Current - nA 80 IIH, VI = 5 V 60 40 20 0 IIL, VI = 0 - 20 - 40 0 20 40 60 80 100 475 450 VO = - 2 V 425 VO = 2 V 400 375 350 325 300 120 0 20 TA - Free-Air Temperature - C 40 Figure 6 ICC + 40 RL = VI = 0.8 V or 2 V 0 - 40 VCC = 5 V - 80 120 VCC = 12 V CL = 15 pF 25 SR - Output Slew Rate - V/s I CC - Supply Current - A 30 VCC = 5 V 100 OUTPUT SLEW RATE vs FREE-AIR TEMPERATURE VCC = 12 V 80 80 Figure 7 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 120 60 TA - Free-Air Temperature - C Slew Rate Positive Transition RL = 3 k RL = 7 k 20 15 RL = 3 k RL = 7 k Slew Rate Negative Transition 10 5 ICC - VCC = 12 V - 120 0 20 40 60 80 100 120 0 0 20 TA - Free-Air Temperature - C 40 60 80 100 120 TA - Free-Air Temperature - C Figure 8 Figure 9 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs FREE-AIR TEMPERATURE 2 2 RL = 7 k tPHL RL = 3 k VCC = 12 V CL = 15 pF 1.5 RL = 3 k tPLH 1 VCC + = 12 V VCC - = - 12 V RL = 3 k to 7 k 1.75 t t - Output Transition Time - s t pd - Propagation Delay Time - s tpd OUTPUT TRANSITION TIME vs FREE-AIR TEMPERATURE RL = 7 k 0.5 tTHL tTLH 1.5 CL = 2500 pF 1.25 tTLH CL = 15 pF 1 tTHL 0.75 0.5 0.25 0 0 0 20 40 60 80 100 0 120 20 40 60 Figure 10 Figure 11 APPLICATION INFORMATION Output to RTL - 0.7 V to 3.7 V 1/4 'C188 3V Output to DTL - 0.7 V to 5.7 V Input From TTL, DTL, or CMOS 1/4 'C188 5V Output to HNIL or 10-V CMOS - 0.7 V to 10 V 1/4 'C188 Output to MOS - 10 V to 0 V 1 k 1/4 'C188 VCC = 12 V 10 k - 12 V Figure 12. Logic Translator Applications 8 80 100 TA - Free-Air Temperature - C TA - Free-Air Temperature - C POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 120 SN75C188 QUADRUPLE LOW-POWER LINE DRIVERS SLLS033F - JANUARY 1988 - REVISED MARCH 1997 APPLICATION INFORMATION + 15 V Output SN75C188 VCC + VCC + SN75C188 VCC - VCC - NOTE A: External diodes placed in series with the VCC + and VCC - leads protect the SN75C188 in the fault condition where the device outputs are shorted to 15 V and the power supplies are at low voltage and provide low-impedance paths to GND. Figure 13. Power Supply Protection to Meet Power-Off Fault Conditions of Standard EIA/TIA-232-E POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN75C188D ACTIVE SOIC D 14 SN75C188DBLE OBSOLETE SSOP DB 14 SN75C188DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75C188NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75C188NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188NSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75C188NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 50 Green (RoHS & no Sb/Br) TBD Lead/Ball Finish CU NIPDAU Call TI MSL Peak Temp (3) Level-1-260C-UNLIM Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN75C188DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN75C188DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN75C188DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN75C188NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75C188DBR SSOP DB 14 2000 367.0 367.0 38.0 SN75C188DR SOIC D 14 2500 333.2 345.9 28.6 SN75C188DR SOIC D 14 2500 367.0 367.0 38.0 SN75C188NSR SO NS 14 2000 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated