KB10 10 W att Single and Dual Output, PCB Mountable AC/DC Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load. INPUT SPECIFICATIONS Input Voltage.............................................. AC 85V-264V Input Frequency.......................................... 47-63 Hz Input Current............................................... Vin= 115v 0.18A Vin= 230v 0.12A Inrush Current............................................. Vin= 100v 3.2A Vin= 230v 7.5A OUTPUT SPECIFICATIONS FEATURES PC BOARD MOUNTABLE SUPER SMALL SIZE HIGH POWER DENSITY UNIVERSAL INPUT / "CE-MARK" HIGH RELIABILITY OVERCURRENT PROTECTION TWO YEAR WARRANTY Output Voltage............................................ See Chart Output Adjustment...................................... No Adjustment Efficiency..................................................... 75~80% Over-Voltage Protection.............................. N/A Over-Current Protection.............................. Automatic Recovery (105% min) Ripple and Noise......................................... 150 mVp-p (typ.) Hold-Up Time.............................................. Vin= 100v 11mSec Vin= 230v 90mSec Line/Load Regulation.................................. 0.4% / 1% (MAX) Rise Time.................................................... Vin= 100v 130mSec Vin= 230v 115mSec Leakage Current......................................... Vin= 100v 0.12 m Arms Vin= 230v 0.26 m Arms GENERAL SPECIFICATIONS Switching Frequency................................... 100 KHz Typ MTBF.......................................................... >280,000 Hours Typ Isolation Voltage Primary to Secondary............... 3000 VAC Primary to Case........................ 1500 VAC Secondary to Case.................... 500 VAC Isolation Resistance.................................... 100 M ENVIRONMENTAL SPECIFICATIONS SAFETIES / EMI FCC Part 15-B EN 55022-B Operating Temperature .............................. 0C ~ +60C Derates linearly 2.5%/C after 50C Cooling........................................................ Convection Temperature Coefficient.............................. 0.02% / C Humidity...................................................... 20~85% Rh Storage Temperature.................................. -20 ~ +85C Shock/Vibration........................................... Shock: 20G (3 Directions each 3 times) Vibration: 1~55Hz PHYSICAL SPECIFICATIONS Board Level Encapsulated Thru- hole Pins 90 Series INPUT RATING MODEL KB10-05S KB10-12S KB10-15S KB10-24S KB10-122D KB10-153D 115-230 V 115-230 V 115-230 V 115-230 V 115-230 V 115-230 V 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ OUTPUT VOLTAGE OUTPUT CURRENT 5 VDC 12 VDC 15 VDC 24 VDC 12 VDC 15 VDC 0 ~ 2.0 A 0 ~ 0.9 A 0 ~ 0.7 A 0 ~ 450 mA 45 ~ 450 mA 35 ~ 350 mA EFFICIENCY AT 100% LOAD (TYP.) 75% 80% 80% 80% 80% 80% KB10 Series NOTE: All specifications typical and nominal / full load and 25C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. 91 * Dimensions in mm