MBR0530 VISHAY Vishay Semiconductors Small Surface Mount Schottky Rectifier Features * * * * * For surface mounted applications Low profile package Ideal for automated placement Low power loss, high efficiency High temperature soldering: 250 C/10 seconds at terminals 17431 Mechanical Data Case: SOD-123 plastic case Polarity: Band denotes cathode end Weight: approx. 9.3 mg Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part MBR0530 Ordering code Marking MBR0530-GS18 or MBR0530-GS08 Remarks B3 Tape and Reel Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Symbol Value Unit Maximum repetitive peak reverse voltage Parameter Test condition VRRM 30 V Working peak reverse voltage VRWM 30 V VR 30 V Max. average forward rectified current at rated VR TC = 115 C IFAV 0.5 A Peak forward surge current 8.3 ms single half sine-wave TL = 25 C IFSM 5.5 A Voltage rate of change at rated VR TJ = 25 C dv/dt 1,000 V/s Maximum DC blocking voltage Document Number 85676 Rev. 1.2, 30-Apr-04 www.vishay.com 1 MBR0530 VISHAY Vishay Semiconductors Thermal Characteristics Tamb = 25 C, unless otherwise specified Symbol Value Unit Typical thermal resistance junction to lead Parameter Test condition RthJL 118 C/W Typical thermal resistance junction to ambient RthJA 206 C/W Tj, Tstg - 55 to + 125 C Operating junction and storage temperature Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Maximum instantaneous Symbol Max Unit VF 0.375 V IF = 0.1 A, Tj = 100 C VF 0.340 V IF = 0.5 A, Tj = 25 C VF 0.43 V IF = 0.5 A, Tj = 100 C VF 0.420 V VR = 30 V, Tj = 25 C IR 130 A VR = 30 V, Tj = 100 C IR 5 mA VR = 15 V, Tj = 25 C IR 20 A IF = 0.1 A, Tj = 25 C Min Typ. forward voltage1) Maximum DC reverse current 1) Pulse test: 300 ms pulse width, 1 % duty cycle Package Dimensions in mm (Inches) 0.55 (0.022) Mounting Pad Layout Cathode Band 1.40 (0.055) 0.15 (0.006) max. 1.35 (0.053) max. 1.40 (0.055) 0.1 (0.004) max. 1.70 (0.067) 1.40 (0.055) 2.55 (0.100) 2.85 (0.112) 3.55 (0.140) 3.85 (0.152) 2.40 (0.094) ISO Method A 17432 0.25 (0.010) min. www.vishay.com 2 Document Number 85676 Rev. 1.2, 30-Apr-04 MBR0530 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85676 Rev. 1.2, 30-Apr-04 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1