TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 VOIDLESS-HERMETICALLY-SEALED 1.5 WATT GLASS ZENER DIODE Qualified per MIL-PRF-19500/406 DEVICES LEVELS 1N4460 thru 1N4496 & C / D / US 1N6485 thru 1N6491 & C / D / US JAN JANTX JANTXV JANS DESCRIPTION This Zener Voltage Regulator series is military qualified to MIL-PRF-19500/406 and is ideal for high-reliability applications where a failure cannot be tolerated. These industryrecognized 1.5 Watt Zener Voltage Regulators are hermetically sealed with voidless-glass construction using an internal metallurgical bond. It includes Zener selections from 3.3 to 200 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. They are also available in surface-mount packages (see separate data sheet for 1N4460US thru 1N4496US and 1N6485US thru 1N6491US). Microsemi also offers numerous other Zener products to meet higher and lower power ratings in both thruhole and surface mount packages. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES DO-41 3/4 Popular JEDEC registered series 3/4 Voidless hermetically sealed glass package 3/4 Extremely robust construction 3/4 Triple-layer passivation 3/4 Internal "Category I" Metallurgical bonds for 1N4462 thru 1N4496 and "Category III" for 1N6485 thru 1N6491 as well as 1N4460 and 1N4461. 3/4 JAN, JANTX, JANTXV, and JANS available per MIL-PRF-19500/406 3/4 Surface mount equivalents also available in a square end-cap MELF configuration with a "US" suffix (see separate data sheet for 1N4460US thru 1N4496US and 1N6485US thru 1N6491US) T4-LDS-0183 Rev. 1 (101686) Page 1 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 APPLICATIONS / BENEFITS 3/4 Regulates voltage over a broad operating current and temperature range 3/4 Extensive selection from 3.3 to 200V 3/4 Standard voltage tolerances are plus/minus 5% with no suffix 3/4 Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively 3/4 Flexible axial-lead mounting terminals 3/4 Nonsensitive to ESD per MIL-STD-750 Method 1020 3/4 Inherently radiation hard as described in Microsemi MicroNote 050 MAXIMUM RATINGS 3/4 Operating Temperature: -65oC to +175oC. 3/4 Storage Temperature: -65oC to +200oC. 3/4 Power Dissipation: 1.5 Watts @ TA = 25oC 3/4 Thermal Resistance: 42oC/W junction to lead at 3/8 inch (10 mm) from body 3/4 Thermal Impedance: 4.5oC/W (1N4462 thru 1N4496) and 7.5oC/W (1N6485 thru 1N6491 as well as 1N4460 and 1N4461) at 10 ms 3/4 Forward Voltage: 1.00 V at 200 mA and 1.5 V at 1.0 A MECHANICAL AND PACKAGING 3/4 CASE: Hermetically sealed voidless hard glass with Tungsten slugs 3/4 TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb) over Copper 3/4 MARKING: Body painted and part number, etc. 3/4 POLARITY: Cathode indicated by band 3/4 Tape & Reel option: Standard per EIA-296 3/4 Weight: 340 mg T4-LDS-0183 Rev. 1 (101686) Page 2 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS @ 25C Case Temperature TYPE NOMINAL MAXIMUM MAXIMUM KNEE TEST IMPEDANCE ZENER DYNAMIC CURRENT ZZK @ IZK VOLTAGE IMPEDANCE IZT VZ ZZT @ IZT MAXIMUM REVERSE CURRENT IR @ VR MAXIMUM CONTINUOUS CURRENT IZM SURGE CURRENT @ 8.3 ms sq. wave IZSM VOLTS mA OHMS OHMS mA A mA AMPS 1N6485 1N6486 1N6487 1N6488 1N6489 1N6490 1N6491 3.3 3.6 3.9 4.3 4.7 5.1 5.6 76.0 69.0 64.0 58.0 53.0 49.0 45.0 10 10 9 9 8 7 5 400 400 400 400 500 500 600 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50 50 35 5.0 4.0 1.0 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 433 397 366 332 304 280 255 4.2 3.9 3.6 3.3 3.0 2.7 2.5 1N4460 1N4461 1N4462 1N4463 6.2 6.8 7.5 8.2 40.0 37.0 34.0 31.0 4 2.5 2.5 3 200 200 400 400 1.0 1.0 .5 .5 10.0 5.0 1.0 .50 3.72 4.08 4.50 4.92 230 210 191 174 2.3 2.1 1.9 1.7 1N4464 1N4465 1N4466 1N4467 9.1 10.0 11.0 12.0 28.0 25.0 23.0 21.0 4 5 6 7 500 500 550 550 .5 .25 .25 .25 .30 .30 .30 .20 5.46 8.00 8.80 9.60 157 143 130 119 1.6 1.4 1.3 1.2 1N4468 1N4469 1N4470 1N4471 13.0 15.0 16.0 18.0 19.0 17.0 15.5 14.0 8 9 10 11 550 600 600 650 .25 .25 .25 .25 .05 .05 .05 .05 10.40 12.00 12.80 14.40 110 95 90 79 1.1 .95 .90 .79 1N4472 1N4473 1N4474 1N4475 20.0 22.0 24.0 27.0 12.5 11.5 10.5 9.5 12 14 16 18 650 650 700 700 .25 .25 .25 .25 .05 .05 .05 .05 16.00 17.60 19.20 21.60 71 65 60 53 .71 .65 .60 .53 1N4476 1N4477 1N4478 1N4479 30.0 33.0 36.0 39.0 8.5 7.5 7.0 6.5 20 25 27 30 750 800 850 900 .25 .25 .25 .25 .05 .05 .05 .05 24.00 26.40 28.80 31.2 48 43 40 37 .48 .43 .40 .37 1N4480 1N4481 1N4482 1N4483 43.0 47.0 51.0 56.0 6.0 5.5 5.0 4.5 40 50 60 70 950 1000 1100 1300 .25 .25 .25 .25 .05 .05 .05 .25 34.4 37.6 40.8 44.8 33 30 28 26 .33 .30 .28 .26 1N4484 1N4485 1N4486 1N4487 62.0 68.0 75.0 82.0 4.0 3.7 3.3 3.0 80 100 130 160 1500 1700 2000 2500 .25 .25 .25 .25 .25 .25 .25 .25 49.6 54.4 60.4 65.6 23 21 19 17 .23 .21 .19 .17 1N4488 1N4489 1N4490 1N4491 91.0 100.0 110.0 120.0 2.8 2.5 2.0 2.0 200 250 300 400 3000 3100 4000 4500 .25 .25 .25 .25 .25 .25 .25 .25 72.8 80.0 88.0 96.0 16 14 13 12 .16 .14 .13 .12 1N4492 1N4493 1N4494 1N4495 130.0 150.0 160.0 180.0 1.9 1.7 1.6 1.4 500 700 1000 1300 5000 6000 6500 7000 .25 .25 .25 .25 .25 .25 .25 .25 104.0 120.0 128.0 144.0 11 9.5 8.9 7.9 .11 .095 .089 .079 1N4496 200.0 1.2 1500 8000 .25 .25 160.0 7.2 .072 T4-LDS-0183 Rev. 1 (101686) VOLTS Page 3 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 SYMBOLS & DEFINITIONS Symbol Definition VZ Zener Voltage: The zener voltage the device will exhibit at a specified current (IZ) in its breakdown region. IZ, IZT, IZK ZZT or ZZK Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK). Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of IZT or IZK) and superimposed on IZT or IZK respectively. VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. IR Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. IZM Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. IZSM Maximum Zener Surge Current: The nonrepetitive peak value of zener surge current at a specified wave form. GRAPHS FIGURE 1 TYPICAL TEMPERATURE COEFFICIENT CHARACTERISTICS T4-LDS-0183 Rev. 1 (101686) FIGURE 2 POWER TEMPERATURE DERATING CURVE Page 4 of 5 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS NOTE: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Package contour optional with BD and length BL. Heat slugs, if any, shall be included within this cylinder length but shall not be subject to minimum limit of BD. 4. The specified lead diameters apply in the zone between .050 inch (1.27 mm) from the diode body and the end of the lead. 5. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. Ltr BL BD LL LD LU Dimensions Inches Millimeters Min Max Min Max .106 .160 2.69 4.06 .060 .085 1.52 2.16 .800 1.300 20.32 33.02 .028 .032 0.71 0.81 .050 1.27 Notes 3 3 4 FIGURE 1. Physical dimensions of nonsurface mount device (similar to DO-41) NOTE: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. 4. Dimensions are pre-solder dip. Ltr BL ECT S BD Dimensions Inches Millimeters Min Max Min Max .168 .200 4.28 5.08 .019 .028 0.48 0.71 .003 0.08 .091 .103 2.31 2.62 FIGURE 2. Physical dimensions of surface mount device, US(D5A). T4-LDS-0183 Rev. 1 (101686) Page 5 of 5