PLY17BN4912R4A2M - MuRata Manufacturing Co., Ltd.

Cat.No.C09E-9

Murata

Manufacturing Co., Ltd.

EMI Suppression Filters

(EMIFILr)

for AC Power Lines

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Recycled Paper
Part Numbering 2
Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines 3
Common Mode Choke Coil 5
FKOB Series 5
PLA10 Series Standard Winding Type 6
PLA10 Series Sectional Winding Type 6
PLA10 Series (Safety Standard Recognized) Standard Winding Type 8
PLA10 Series (Safety Standard Recognized) Sectional Winding Type 8
PLH10 Series 10
PLH10 Series (Safety Standard Recognized) 11
Hybrid Choke Coil 12
PLY10 Series Standard Winding Type 12
PLY10 Series Sectional Winding Type 13
PLY17 Series A Type 14
PLY17 Series B Type 14
Noise Suppression Effect of PLY10 Series 16
!Caution /Notice 17
Packaging 18
EMIFILr in this catalog is the trademark of Murata Manufacturing Co., Ltd.
1
2
1
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. 
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note C09E9.pdf 05.2.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

2

o Part Numberingo Part Numbering

(Part Number)

AC Line Filters

eApplications

Code

for AC Line

Applications

10

17

Code

Core Vertical Type

Core Horizontal Type

Structure

A

B

qProduct ID

PL Common Mode Choke Coils

Product ID

wType

A

H

Y

AC Standard Type

AC High-frequency Type

AC Hybrid Choke Coils Type

Code Type

!0Packaging

B

MAll series

Bulk

Magazine Package

Code Packaging Series

iWinding Mode

A

B

D

R

P

Parallel Winding Type

Parallel Winding Type (High Performance Type)

Sectional Winding Type

Standard Type

Single Layer Winding Type

Code Winding Mode

uRated Current

Expressed by three figures. The unit is in amperes (A). A decimal

point is expressed by the capital letter "R". In this case, all figures

are significant digits.

oLead Dimensions

23.5mm

Code Lead Dimensions

rStructure

Code

Safety Recognized

General Use

Features

S

N

tFeatures

yInductance

Expressed by three figures. The unit is micro-henry (µH). The first

and second figures are significant digits, and the third figure

expresses the number of zeros which follow the two figures. If

there is a decimal point, it is expressed by the capital letter "R". In

this case, all figures are significant digits. If inductance is less

than 0.1 µH, the inductance code is expressed by a combination

of two figures and capital letter "N", and the unit of inductance is

nano-henry (nH). The capital letter "N" indicates the unit of "nH",

and also expresses a decimal point. In this case, all figures are

significant digits.

y

152

t

S

u

2R0

q

PL

r

A

e

10

w

A

i

R

o

2

!0

B

• Please contact us for FKOB series.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

3

EMI (Electro Magnetic Interference) suppression filter for AC

power lines eliminate noise entering equipment from

commercial power lines or noise generated from electronic

equipment.

Common mode chokes, line bypass capacitors, across the

line capacitors are generally used as AC EMI suppression

filter device. In suppressing common mode noise, common

mode chokes are most important devices. Because the

characteristics of common mode chokes influences

performance of total filter block MURATA provides two types

of common mode chokes. (Standard type, High frequency

type)

Hybrid choke coil is high performance EMI suppression

device which can suppress both common mode noise and

differential mode noise at the same time. It is effective in AC

power supplies with active device for higher harmonic

countermeasure, which tend to emit relatively higher

differential mode noise.

■ Classification of EMI Suppression Filter for AC Power Lines

Product Name

Common Mode Choke Coil Standard Type

Suppression of general

common mode noise

Suppression of common mode

noise contains high frequency

noise above 10MHz

Suppression of conduction

noise in AC power line with

active device for higher

harmonic countermeasure.

Suppression of AC power line

noise which contains both

common mode noise and

differential mode noise.

PLA10

PLH10

PLY10

High Frequency Type

Hybrid Choke Coil

Appearance Effective Frequency Range (Hz)

10k 100k 1M 10M 100M 1G Application

Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines

For AC power supply,

AC adaptor.

Set for low profile equipment.

FKOB

PLY17

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

4

Outline of EMI Suppression Filter (EMIFILr) for AC Power Lines

■ Common Mode Choke Coil Standard Winding and Sectional Winding

■ Noise Measures for Switching Power Supply

Standard Winding

Sectional Winding

1

18

19

36

2

17

20

35

3

16

21

34

4

15

22

33

5

14

23

32

6

13

24

31

7

12

25

30

8

11

26

29

9

10

27

28

End of Winding

Beginning of Winding

High-frequency noise can pass through the

Filter easily because both edges of coils are

close as shown above

1

8

9

16

2

7

10

15

3

6

11

14

4

5

12

13

17

24

25

32

18

23

26

31

19

22

27

30

20

21

28

29

Beginning of Winding

High-frequency noise can hardly pass

through the Filter because both edges

of coil are not close as shown above

Standard Winding

Large inductance is available

→Highly Efficient in Low Frequency

Sectional Winding

Excellent performance in high frequency

Stray capacity between windings is low

Frequency (MHz)

Insertion Loss (dB)

0.1 1 10 100

0

20

40

60

80

0.01

(Standard Winding)

(Sectional Winding)

Noise are generated from

Switching Power Supply

Common Mode Noise

Differential Mode Noise

PLA10/PLH10

Common Mode Choke Coil

suppresses Common

Mode Noise

Across the Line Capacitor

(X Capacitor) suppresses

Differential Mode Noise

Across the Line Capacitor

(X Capacitor) suppresses

Differential Mode Noise

Differential Mode Choke Coil

suppresses Differential Mode Noise

Differential Mode Choke Coil

suppresses Differential Mode

Noise

Line Bypass Capacitor

(Y Capacitor) suppresses

Common Mode Noise

Load

Switching

Power Supply

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

5

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EMI Suppression Filters (EMIFILr) for AC Power Lines

Common Mode Choke Coil

FKOB Series

The FKOB series is compact size AC common mode choke

coil which uses troidal type ferrite core.

Its broad band frequency characteristic enables simple

filter composition in relative low noise equipments.

8±0.5

ø23 max.

14

32

10±0.5

10±2 17 max.

(in mm)

FKOB160MH02/25/23/26/24

ø23 max.

14

32

4.5±1 17 max.

10±0.5

13±0.5

(in mm)

FKOB160MH06/13/14/16/15

Part Number Common Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

FKOB160MH02 250 2.5 250 100

FKOB160MH06 250 2.5 250 100

FKOB160MH13 600 2.5 250 100

FKOB160MH25 600 2.5 250 100

FKOB160MH14 800 2.5 250 100

FKOB160MH23 800 2.5 250 100

FKOB160MH16 1000 1.5 250 100

FKOB160MH26 1000 1.5 250 100

FKOB160MH15 1500 1.5 250 100

FKOB160MH24 1500 1.5 250 100

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -20°C to 95°C Winding Temperature Rise (at Rated Current) (max.): 35K

■ Equivalent Circuit Diagram

(1)

(4)

(2)

(3)

N1

N2

N1 : N2 = 1 : 1

■ Insertion Loss-Frequency Characteristics

0

10

20

30

40

50

60

70 0.1 0.5 1 5 10 50 100

16, 26

15, 24

02, 06

13, 14, 23, 25

Frequency (MHz)

Insertion Loss (dB)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

6

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PLA10 Series Standard Winding Type

The PLA10 series is a compact size AC common mode

choke coil. It can obtain a high inductance value in

spite of its compact size.

■ Features

1. Compact and light weight

2. Low profile in vertical core layout

3. Both a standard winding type and a sectional

winding type for higher frequency noise are

available. (in mm)

17.5 max.

18 max.

13±0.5 10±0.5

16 max.

ø0.9 max.

3.5±1

(1)

[(2)]

(4)

[(3)]

(4)

[(1)]

(3)

[(2)]

Standard Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLA10AN1522R0R2 1.5 2.0 300 100

PLA10AN1821R7R2 1.8 1.7 300 100

PLA10AN2221R5R2 2.2 1.5 300 100

PLA10AN3021R3R2 3.0 1.3 300 100

PLA10AN3521R2R2 3.5 1.2 300 100

PLA10AN5521R0R2 5.5 1.0 300 100

PLA10AN7420R8R2 7.4 0.8 300 100

PLA10AN1030R7R2 10.0 0.7 300 100

PLA10AN1230R6R2 12.0 0.6 300 100

PLA10AN2030R5R2 20.0 0.5 300 100

PLA10AN3030R4R2 30.0 0.4 300 100

PLA10AN4330R3R2 43.0 0.3 300 100

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

PLA10 Series Sectional Winding Type

(in mm)

17.5 max.

16 max.18 max.

13±0.5 10±0.5

ø0.9 max.

3.5±1

(1) (4)

[(2)]

(4)

[(1)]

(3)

[(2)][(3)]

Sectional Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLA10AN9012R0D2 0.9 2.0 300 100

PLA10AN1321R7D2 1.3 1.7 300 100

PLA10AN1821R5D2 1.8 1.5 300 100

PLA10AN2021R3D2 2.0 1.3 300 100

PLA10AN3621R0D2 3.6 1.0 300 100

PLA10AN7720R7D2 7.7 0.7 300 100

PLA10AN1330R5D2 13.0 0.5 300 100

PLA10AN2230R4D2 22.0 0.4 300 100

PLA10AN3630R3D2 36.0 0.3 300 100

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

7

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Equivalent Circuit Diagram

(1)

(4)

(2)

(3)

N1

N2

N1 : N2 = 1 : 1

■ Insertion Loss-Frequency Characteristics

Standard Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

PLA10AN1522R0R2

PLA10AN1821R7R2

PLA10AN2221R5R2

PLA10AN3021R3R2

PLA10AN3521R2R2

PLA10AN5521R0R2

Insertion Loss (dB)

PLA10AN7420R8R2

PLA10AN1030R7R2

PLA10AN1230R6R2

PLA10AN2030R5R2

PLA10AN3030R4R2

PLA10AN4330R3R2

Sectional Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLA10AN9012R0D2

PLA10AN1321R7D2

PLA10AN1821R5D2

PLA10AN2021R3D2

PLA10AN3621R0D2

PLA10AN7720R7D2

PLA10AN1330R5D2

PLA10AN2230R4D2

PLA10AN3630R3D2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

8

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PLA10 Series (Safety Standard Recognized) Standard Winding Type

■ Features

1. Compact and light weight

2. Low profile in vertical core layout

3. Both a standard winding type and a sectional

winding type for higher frequency noise are

available.

4. Safety standards: EN60065

■ Applications

Switching power supply, electric ballast

(AC-AC converter) (in mm)

17.5 max.

18 max.

13±0.5 10±0.5

16 max.

ø0.9 max.

3.5±1

(1)

[(2)]

(4)

[(3)]

(4)

[(1)]

(3)

[(2)]

Standard Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLA10AS1522R0R2 1.5 2.0 250 100

PLA10AS1821R7R2 1.8 1.7 250 100

PLA10AS2221R5R2 2.2 1.5 250 100

PLA10AS3021R3R2 3.0 1.3 250 100

PLA10AS3521R2R2 3.5 1.2 250 100

PLA10AS5521R0R2 5.5 1.0 250 100

PLA10AS7420R8R2 7.4 0.8 250 100

PLA10AS1030R7R2 10.0 0.7 250 100

PLA10AS1230R6R2 12.0 0.6 250 100

PLA10AS2030R5R2 20.0 0.5 250 100

PLA10AS3030R4R2 30.0 0.4 250 100

PLA10AS4330R3R2 43.0 0.3 250 100

Operating Temperature Range : -25°C to 60°C Winding Temperature Rise (at Rated Current) (max.): 60K

PLA10 Series (Safety Standard Recognized) Sectional Winding Type

(in mm)

17.5 max.

16 max.18 max.

13±0.5 10±0.5

ø0.9 max.

3.5±1

(1) (4)

[(2)]

(4)

[(1)]

(3)

[(2)][(3)]

Sectional Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLA10AS9012R0D2 0.9 2.0 250 100

PLA10AS1321R7D2 1.3 1.7 250 100

PLA10AS1821R5D2 1.8 1.5 250 100

PLA10AS2021R3D2 2.0 1.3 250 100

PLA10AS3621R0D2 3.6 1.0 250 100

PLA10AS7720R7D2 7.7 0.7 250 100

PLA10AS1330R5D2 13.0 0.5 250 100

PLA10AS2230R4D2 22.0 0.4 250 100

PLA10AS3630R3D2 36.0 0.3 250 100

Operating Temperature Range : -25°C to 60°C Winding Temperature Rise (at Rated Current) (max.): 60K

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

9

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Equivalent Circuit Diagram

(1)

(4)

(2)

(3)

N1

N2

N1 : N2 = 1 : 1

■ Insertion Loss-Frequency Characteristics

Standard Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

PLA10AS1522R0R2

PLA10AS1821R7R2

PLA10AS2221R5R2

PLA10AS3021R3R2

PLA10AS3521R2R2

PLA10AS5521R0R2

Insertion Loss (dB)

PLA10AS7420R8R2

PLA10AS1030R7R2

PLA10AS1230R6R2

PLA10AS2030R5R2

PLA10AS3030R4R2

PLA10AS4330R3R2

Sectional Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLA10AS9012R0D2

PLA10AS1321R7D2

PLA10AS1821R5D2

PLA10AS2021R3D2

PLA10AS3621R0D2

PLA10AS7720R7D2

PLA10AS1330R5D2

PLA10AS2230R4D2

PLA10AS3630R3D2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

10

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PLH10 Series

The PLH10 series is a common mode choke coil for high

frequency use. The same dimensions as the PLA10 series

enables flexible design.

■ Features

1. High performance in high frequency range

2. Low profile in vertical core layout

3. Compact and light weight

17.5 max.

18 max.

13±0.5

(in mm)

10±0.5

16 max.

ø0.9 max.

3.5±1

(4)

[(1)]

(3)

[(2)]

(4)

[(3)]

(1)

[(2)]

Part Number Common Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLH10AN7003R6P2 70 3.6 300 100

PLH10AN1112R6P2 110 2.6 300 100

PLH10AN1612R1P2 160 2.1 300 100

PLH10AN2211R5P2 220 1.5 300 100

PLH10AN2911R2P2 290 1.2 300 100

PLH10AN3711R0P2 370 1.0 300 100

Operating Temperature Range (Ambient Temperature Range + Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

■ Equivalent Circuit Diagram

(1)

(4)

(2)

(3)

N1

N2

N1 : N2 = 1 : 1

■ Insertion Loss-Frequency Characteristics

Insertion Loss (dB)

Frequency (MHz)

0.1 1.0 10 1000

0

10

20

30

40

50 100

PLH10AN1112R6P2

PLH10AN1612R1P2

PLH10AN2211R5P2

PLH10AN2911R2P2

PLH10AN3711R0P2

PLH10AN7003R6P2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

11

1

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PLH10 Series (Safety Standard Recognized)

■ Features

1. High performance in high frequency range

2. Low profile in vertical core layout

3. Compact and light weight

4. Safety standards: EN60065

■ Applications

Suppressing radiation noise in switching power

supply and inverter (AC-AC converter)

17.5 max.

18 max.

13±0.5

(in mm)

10±0.5

16 max.

ø0.9 max.

3.5±1

(4)

[(1)]

(3)

[(2)]

(4)

[(3)]

(1)

[(2)]

Part Number Common Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(V)

Insulation Resistance

(min.)

(M ohm)

PLH10AS7003R6P2 70 3.6 250 100

PLH10AS1112R6P2 110 2.6 250 100

PLH10AS1612R1P2 160 2.1 250 100

PLH10AS2211R5P2 220 1.5 250 100

PLH10AS2911R2P2 290 1.2 250 100

PLH10AS3711R0P2 370 1.0 250 100

Operating Temperature Range : -25°C to 60°C Winding Temperature Rise (at Rated Current) (max.): 60K

■ Equivalent Circuit Diagram

(1)

(4)

(2)

(3)

N1

N2

N1 : N2 = 1 : 1

■ Insertion Loss-Frequency Characteristics

Insertion Loss (dB)

Frequency (MHz)

0.1 1.0 10 1000

0

10

20

30

40

50 100

PLH10AS1112R6P2

PLH10AS1612R1P2

PLH10AS2211R5P2

PLH10AS2911R2P2

PLH10AS3711R0P2

PLH10AS7003R6P2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

12

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

EMI Suppression Filters (EMIFILr) for AC Power Lines

Hybrid Choke Coil

PLY10 Series Standard Winding Type

The PLY10 is a compact and high performance hybrid

choke coil which can handle differential mode noise

caused by the harmonics currents regulation circuit as

well as common mode noise. It can handle noise

problems much more compactly than a combination of a

conventional common mode choke coil and a differential

mode choke coil.

■ Features

1. PLY10 has both functions of a common mode choke

coil and a differential mode choke coil in its

compact body.

2. Low profile in vertical core layout

3. PLY10 has the same pin layout as a general type

common mode choke coil which enables it to replace

conventional components.

4. Both a standard winding type and a sectional winding

type for higher frequency noise are available.

■ EMI Problem for harmonics currents regulation

There are some methods meet harmonics currents

regulations (IEC1000-3, EN60555-2) such as an active

filter type and one converter type. However, they

cause new EMI problems of differential mode noise

because they use active components. For that reason,

additional filter components to meet differential mode

noise must be applied.

17.5 max.

18 max.

13±0.5 10±0.5

16 max.

ø0.9 max.

(in mm)

3.5±1

(4)

[(1)]

(3)

[(2)]

(4)

[(3)]

(1)

[(2)]

Standard Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Normal Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(Vac)

PLY10AN9012R0R2 0.9 65 2.0 300

PLY10AN1121R8R2 1.1 90 1.8 300

PLY10AN1521R6R2 1.5 110 1.6 300

PLY10AN2121R4R2 2.1 150 1.4 300

PLY10AN2821R2R2 2.8 190 1.2 300

PLY10AN4321R0R2 4.3 300 1.0 300

PLY10AN6220R8R2 6.2 400 0.8 300

PLY10AN8720R7R2 8.7 530 0.7 300

PLY10AN9920R6R2 9.9 690 0.6 300

PLY10AN1430R5R2 14.0 1000 0.5 300

Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

13

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

PLY10 Series Sectional Winding Type

17.5 max.

18 max.

13±0.5 10±0.5

(in mm)

16 max.

ø0.9 max.

3.5±1

(4)

[(1)]

(3)

[(2)]

(4)

[(3)]

(1)

[(2)]

Sectional Winding Type

Part Number Common Mode Inductance

(min.)

(mH)

Normal Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(Vac)

PLY10AN7012R0D2 0.7 50 2.0 300

PLY10AN1121R7D2 1.1 65 1.7 300

PLY10AN1421R4D2 1.4 110 1.4 300

PLY10AN2321R2D2 2.3 160 1.2 300

PLY10AN3521R0D2 3.5 240 1.0 300

PLY10AN4420R8D2 4.4 320 0.8 300

PLY10AN8720R7D2 8.7 500 0.7 300

PLY10AN9720R6D2 9.7 670 0.6 300

PLY10AN1130R5D2 11.0 840 0.5 300

Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

■ Equivalent Circuit Diagram

Common Mode Inductor

Differential Mode Inductor

(1) (2)

(3)

(4)

■ Common Mode Insertion Loss-Frequency Characteristics

Standard Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLY10AN9012R0R2

PLY10AN1121R8R2

PLY10AN1521R6R2

PLY10AN2121R4R2

PLY10AN2821R2R2

PLY10AN4321R0R2

PLY10AN6220R8R2

PLY10AN8720R7R2

PLY10AN9920R6R2

PLY10AN1430R5R2

Sectional Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLY10AN7012R0D2

PLY10AN1121R7D2

PLY10AN1421R4D2

PLY10AN2321R2D2

PLY10AN3521R0D2

PLY10AN4420R8D2

PLY10AN8720R7D2

PLY10AN9720R6D2

PLY10AN1130R5D2

Continued on the following page.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

14

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

■ Differential Mode Insertion Loss-Frequency Characteristics

Standard Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLY10AN2121R4R2

PLY10AN2821R2R2

PLY10AN4321R0R2

PLY10AN6220R8R2

PLY10AN8720R7R2

PLY10AN9920R6R2

PLY10AN1430R5R2

PLY10AN9012R0R2

PLY10AN1121R8R2

PLY10AN1521R6R2

Sectional Winding Type

0.1 1 10 100

0

20

40

60

80

0.01

Frequency (MHz)

Insertion Loss (dB)

PLY10AN2321R2D2

PLY10AN3521R0D2

PLY10AN4420R8D2

PLY10AN8720R7D2

PLY10AN9720R6D2

PLY10AN1130R5D2

PLY10AN7012R0D2

PLY10AN1121R7D2

PLY10AN1421R4D2

PLY17 Series A Type

■ Features

1. Integration of choke coil function to suppress

differential mode/Low and High Frequency common

mode noise.

2. Low Profile (H=<13mm)

■ Applications

1. For AC power supply, AC adapter

2. Low profile equipment such as lighting equipment,

FPD, Digital Amplifier (in mm)

22.5±0.5

12.5±0.5

ø1.0 max.

24.5±0.512.5±0.53.5±0.5

(1)

[(2)] (4)

[(3)]

15.0±0.5

(4)

[(1)] (3)

[(2)]

A/B Type

Part Number Common Mode Inductance

(min.)

(mH)

Normal Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(Vac)

PLY17BN4912R4A2 0.49 18 2.4 300

PLY17BN9612R0A2 0.96 36 2.0 300

PLY17BN1023R0A2 1.0 36 3.0 300

PLY17BN1121R8A2 1.1 44 1.8 300

PLY17BN1721R5A2 1.7 67 1.5 300

PLY17BN2921R2A2 2.9 110 1.2 300

PLY17BN3721R0A2 3.7 140 1.0 300

PLY17BN5620R8A2 5.6 210 0.8 300

PLY17BN7820R7A2 7.8 290 0.7 300

PLY17BN9320R6A2 9.3 350 0.6 300

Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

PLY17 Series B Type

Part Number Common Mode Inductance

(min.)

(mH)

Normal Mode Inductance

(min.)

(µH)

Rated Current

(A) Rated Voltage

(Vac)

PLY17BN4912R4B2 0.49 24 2.4 300

PLY17BN9612R0B2 0.96 47 2.0 300

PLY17BN1023R0B2 1.0 47 3.0 300

PLY17BN1121R8B2 1.1 58 1.8 300

PLY17BN1721R5B2 1.7 88 1.5 300

PLY17BN2921R2B2 2.9 140 1.2 300

PLY17BN3721R0B2 3.7 180 1.0 300

PLY17BN5620R8B2 5.6 280 0.8 300

PLY17BN7820R7B2 7.8 390 0.7 300

PLY17BN9320R6B2 9.3 460 0.6 300

Operating Temperature (Ambient Temperature Range+Winding Temperature Rise): -25°C to 120°C Winding Temperature Rise (at Rated Current) (max.): 60K

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

15

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Equivalent Circuit Diagram

(1) (2)

(4) (3)

■

Common Mode Insertion Loss-Frequency Characteristics

0.1 1 10 100

0

20

40

60

80

0.01 Frequency (MHz)

Insertion Loss (dB)

PLY17BN9320R6-2

PLY17BN7820R7-2

PLY17BN5620R8-2

PLY17BN3721R0-2

PLY17BN2921R2-2

PLY17BN1721R5-2

PLY17BN1121R8-2

PLY17BN9612R0-2

PLY17BN4912R4-2

PLY17BN1023R0-2

■ Differential Mode Insertion Loss-Frequency Characteristics

PLY17BN***A Type

0.1 1 10 100

0

20

40

60

80

0.01 Frequency (MHz)

Insertion Loss (dB)

PLY17BN9320R6A2

PLY17BN7820R7A2

PLY17BN5620R8A2

PLY17BN3721R0A2

PLY17BN2921R2A2

PLY17BN1721R5A2

PLY17BN1121R8A2

PLY17BN9612R0A2

PLY17BN4912R4A2

PLY17BN1023R0A2

PLY17BN***B Type

0.1 1 10 100

0

20

40

60

80

0.01 Frequency (MHz)

Insertion Loss (dB)

PLY17BN9320R6B2

PLY17BN7820R7B2

PLY17BN5620R8B2

PLY17BN3721R0B2

PLY17BN2921R2B2

PLY17BN1721R5B2

PLY17BN1121R8B2

PLY17BN9612R0B2

PLY17BN4912R4B2

PLY17BN1023R0B2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

Noise Suppression Effect of PLY10 Series

16

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

The data shows noise suppression effects comparison PLY10 with existing common mode choke coil. (In AC adaptor of note PC)

• Noise Level

The filter circuit with hybrid choke coil has suppressed conducted noise as well as conventional filter in spite of its compact

composition.

1000pF680µH

0.1µF0.33µF

Common mode choke coil and differentical mode choke coil are used. Hybrid choke coil PLY10

24mH 1000pF

0.1µF0.33µF

PLY10A1130R5D

90

80

70

60

50

40

30

20

0.5 1 5 10 30

Frequency (MHz)

Noise Level (dBµV)

90

80

70

60

50

40

30

20

0.5 1 5 10 30

Frequency (MHz)

Common mode choke coil and differencial mode choke coil are used. Hybrid choke coil PLY10

Noise Level (dBµV)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

!Caution /Notice

17

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ !Caution (Rating)

1. Rated Current

Operating current should not exceed the rated

value. Even if operating current is under the

rated value, adequate ventilation is required to

avoid excessive heat generated within the product

(choke coil) and from surrounding heat sources.

If exceeding these conditions, excessive heat may

cause fumes or permanent damage to the product.

Please ensure that product (choke coil) is

evaluated and confirmed against the specification

when it is mounted in your final assembled product.

-> Winding temperature should be less than

120 degree C.

*As for FKOB series winding temperature should be

less than 95 dgree C.

Maximum allowable temperature at the surface of

coil (ambient temperature + winding temperature

rise) is in accordance with each safety standard

applicable to final assembeld product.

When the temperature at winding exceeds maximum

allowable temperature of safety standard, the

rated current should be derated.

2. Inrush Current

Inrush current should not exceed 10 times rated

current within 1/4 cycle of 50/60Hz commercial

power line. Inrush current should be limited to a

minimum of 10 seconds after last inrush.

If these conditions are exceeded, excessive heat may

cause fumes or permanent damage to the component,

or at worst cause ignition.

■ Notice (Storage and Operating Condition)

1. Soldering Conditions

· Rosin-based flux should be used. Do not use strong

acidic flux with halide content exceeding 0.2wt%

(chlorine conversion value)

· Use 63/37 solder (Sn/Pb = 63/37) or 60/40 solder

(Sn/Pb = 60/40). In case of lead-free solder, use

Sn-3.0Ag-0.5Cu solder

2. Cleaning

Avoid cleaning product due to non-waterproof

construction.

3. Storage and Handling Requirements

Product should be used within 12 months after receiving.

Solderability should be checked if this period is

exceeded.

(1) Flux, Solder

(1) Storage period

Storage Temperature: -10 to 40 °C

Relative humidity: 30 to 70%

Avoid sudden changes in temperature and humidity.

Don't keep products in corrosive gases such as sulfur,

chlorine gas or acid, or it may cause oxidation of lead

terminals resulting in poor solderability or corrosion of

component windings.

(2) Storage conditions

Care should be taken when transporting or handling

product to avoid excessive vibration or mechanical shock.

For additional mounting methods, please contact Murata.

(3) Handling conditions

(2) Flow soldering profile

Standard profile Limit profile

Sn/Pb = 60/40, Sn/Pb = 63/37

Sn-3.0Ag-0.5Cu solder

Soldering temp.

240-260°C

Soldering time

5s max.

Soldering temp.

250±2°C

Soldering time

4-6s

Soldering temp.

265±3°C

Soldering time

5s

Cycle of flow

2 times

Pre-heating

Soldering

Gradual cooling

(in air)

150°C

300

250

200

150

100

50

Temperature (°C)

60s min. Soldering time

Soldering temperature

■ Notice (Soldering and Mounting)

Magnetic Flux Leakage

Choke coils generate small amounts of magnetic flux

leakage that may adversely affect equipment operation

according to component arrangement.

Testing should be completed on final assembly to

ensure equipment performance is not affected.

■ Notice (Rating)

Coil Humming Noise

Magnetic flux generated between coil and core or

between the choke coil windings creates repulsive

power between the coil windings. This repulsive

power causes the coil winding to vibrate and create

a humming noise. The amount of hum produced by the

coil is proportionate to the amount of harmonic

distortion generated by the operating current. This

does not influence the electrical performance of

the coils, but it should be considered and tested

in actual circuit application.

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

Packaging

18

2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

■ Minimum Quantity

Part Number

FKOB

PLA10

PLH10

PLY10

PLY17

-

1800

1920

Magazine Package

100

1260

1200

1080

Box

Minimum Quantity (pcs.)

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

Head Office

1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan

Phone: 81-75-951-9111

International Division

3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan

Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp

http://www.murata.com/

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note C09E9.pdf 05.2.16

Note:

1. Export Control

<

For customers outside Japan

>

Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive

weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.

<

For customers in Japan

>

For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required

for export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially

high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use

in applications other than those specified in this catalog.

qAircraft equipment wAerospace equipment

eUndersea equipment rPower plant equipment

tMedical equipment yTransportation equipment (vehicles, trains, ships, etc.)

uTraffic signal equipment iDisaster prevention / crime prevention equipment

oData-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice.

Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or

product engineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or

transact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect

of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or

contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned

above under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.