3
2
4
5
TPS380x . . . DCKPACKAGE
(TOPVIEW)
1
RESET
GND
MR
VDD
GND
3
2
4
5
TPS3801−01. . . DCKPACKAGE
(TOPVIEW)
1
RESET
GND
SENSE
VDD
GND
VDD =1.8V
100nF
TPS3801E18
TMS320VC5420
GND
GND
MR RESET RESET
CoreVDD
VDD
TPS3800-xx
TPS3801-xx
TPS3802-xx
www.ti.com
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
ULTRA-SMALL SUPPLY VOLTAGE SUPERVISORS
Check for Samples: TPS3800-xx,TPS3801-xx,TPS3802-xx
1FEATURES DESCRIPTION
2• Small, 5-Pin SC-70 (SOT-323) Package
• Supply Current of 9 mAThe TPS380x family of supervisory circuits monitor
supply voltages to provide circuit initialization and
• Power-On Reset Generator With Fixed Delay timing supervision, primarily for DSPs and other
Time processor-based systems.
– TPS3800 = 100 ms These devices assert a push-pull RESET signal when
– TPS3801 = 200 ms the SENSE (adjustable version) or VDD (fixed version)
– TPS3802 = 400 ms drops below a preset threshold. The RESET output
remains asserted for the factory programmed delay
• Precision Supply Voltage Monitor 1.8 V, 2.5 V, time after the SENSE or VDD return above its
2.7 V, 3 V, 3.3 V, 5 V, and Adjustable threshold.
• Manual Reset Input (Except TPS3801-01) The TPS380x devices, except the TPS3801-01,
• Temperature Range: –40°C to +85°C incorporate a manual reset input (MR). A low level at
MR causes RESET to become active.
APPLICATIONS The TPS380x uses a precision reference to achieve
• Applications Using DSPs, Microcontrollers, or an overall threshold accuracy of 2%—2.5%. These
Microprocessors devices are available in a 5-pin SC-70 package,
• Wireless Communication Systems which is only about half the size of a 5-pin SOT-23
• Portable/Battery-Powered Equipment package.
• Programmable Controls The TPS380x devices are fully specified over a
• Intelligent Instruments temperature range of –40°C to +85°C.
• Industrial Equipment
• Notebook/Desktop Computers
• Automotive Systems
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 1999–2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TPS3800-xx
TPS3801-xx
TPS3802-xx
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
AVAILABLE OPTIONS(1)
TADEVICE NAME THRESHOLD VOLTAGE TYP DELAY TIME MARKING
TPS3801-01DCK Adjustable (Vref = 1.14 V) 200 ms ARF
TPS3801E18DCK 1.71 V 200 ms ARE
TPS3801J25DCK 2.25 V 200 ms NJA
TPS3800G27DCK 2.5 V 95 ms ARI
TPS3801L30DCK 2.64 V 200 ms NPA
–40°C to 85°C TPS3801K33DCK 2.93 V 200 ms NWA
TPS3802L30DCK 2.64 V 380 ms ASA
TPS3802K33DCK 2.93 V 380 ms ARK
TPS3801T50DCK 4.00 V 25 ms AVI
TPS3801I50DCK 4.55 V 200 ms NSA
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or refer to our
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1) (2)
Over operating free-air temperature range (unless otherwise noted). UNIT
Supply voltage, VDD 7 V
SENSE –0.3 V to 5 V
All other pins –0.3 V to 7 V
MR –0.3 V to VDD + 0.3 V
RESET –0.3 V to VDD + 0.3 V
Maximum low-output current, IOL 5 mA
Maximum high-output current, IOH –5 mA
Input-clamp current, IIK (VI< 0 or VI> VDD) ±20 mA
Output-clamp current, IOK (VO< 0 or VO> VDD) ±20 mA
Operating junction temperature range, TJ(3) –40°C to +85°C
Storage temperature range, Tstg –65°C to +150°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation, the device should not be operated at 7 V for more than t = 1000h
continuously.
(3) Due to the low dissipation power of this device, it is assumed that TJ= TA.
RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT
TPS3801J25, TPS3801L30, TPS3801K33, TPS3801I50, TPS3801T50 2 6
Supply voltage, VDD V
All other devices 1.6 4
SENSE 0 See (1) V
Input voltage, VI0 VDD +0.3 V
High-level input voltage, VIH 0.7 × VDD VDD +0.3 V
Low-level input voltage, VIL 0.3 × VDD V
Input transition rise and fall rate at MR, Δt/ΔV 100 ns/V
VPull-up
Pull-up resistor value, RESET Ω
50µA
Operating free-air temperature range, TA–40 +85 °C
(1) Maximum = VDD + 0.3 or 4.5 V, whichever is greater.
2Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
TPS3800-xx
TPS3801-xx
TPS3802-xx
www.ti.com
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
ELECTRICAL CHARACTERISTICS
Over –40°C to +85°C free-air temperature range (unless otherwise noted). TPS3800-xx, TPS3801-xx,
TPS3802-xx
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VDD = 1.6 V to 6 V IOH = –500 mA VDD –0.2
VOH High-level output voltage (RESET) VDD = 3.3 V IOH = –2 mA VDD –0.4 V
VDD = 6 V IOH = –4 mA (1) VDD –0.4
VDD = 1.6 V to 6 V, IOL = 500 mA 0.2
VOL Low-level output voltage (RESET) VDD = 3.3 V, IOL = 2 mA 0.4 V
VDD = 6 V, IOL = 4 mA (1) 0.4
Power-up reset voltage(2) VDD ≥1.1 V, IOL = 50 mA 0.2 V
TPS380x-01 1.117 1.14 1.163
TPS380xE18 1.67 1.71 1.75
TPS380xJ25 2.2 2.25 2.3
TPS380xG27 2.45 2.5 2.55
Negative-going input
VIT– TA= –40°C to 85°C V
threshold voltage(3) TPS380xL30 2.58 2.64 2.7
TPS380xK33 2.87 2.93 2.99
TPS380xI50 4.45 4.55 4.65
TPS380xT50 3.92 4 4.08
TPS380x-01 15
TPS380xx18 25
TPS380xx25 30
Vhys Threshold hysteresis TPS380xx27 35 mV
TPS380xx30 35
TPS380xx33 40
TPS380xx50 60
IIH High-level input current (MR) MR = 0.7×VDD, VDD = 6 V –40 –60 –100 mA
IIL Low-level input current (MR) MR = 0 V, VDD = 6 V –130 –200 –340
IIInput current (SENSE) –25 25 nA
TPS3801J25, VDD = 2 V, MR and output 9 12
TPS3801L30, unconnected
TPS3801K33, VDD = 6 V, MR and output
TPS3801I50, 20 25
unconnected
TPS3801T50 VDD = 1.6 V, SENSE = 0 V to VDD,7 10
output unconnected
IDD Supply current mA
TPS3801-01 VDD = 4 V, SENSE = 0 V to VDD,9 12
output unconnected
VDD = 1.6 V, MR and output
TPS3801E18, 8 11
unconnected
TPS3800G27,
TPS3802K33, VDD = 4 V, MR and output 13 18
TPS3802L30 unconnected
CiInput capacitance VI= 0 V to VDD 5 pF
(1) Only valid for the TPS3801J25, TPS3801L30, TPS3801K33, TPS3801I50, and TPS3801T50.
(2) The lowest supply voltage at which RESET becomes active. tr, VDD ≥15 ms/V.
(3) To ensure the best stability of the threshold voltage, a bypass capacitor (0.1-mF ceramic) should be placed near the supply terminals.
Copyright © 1999–2010, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
td
t
VDD
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
ÎÎ
V(NOM)
VIT
1.1 V
MR
1
0
1
0
t
t
Undefined Behavior of
RESET Output For VDD < 1.1 V
RESET
tdtd
TPS3800-xx
TPS3801-xx
TPS3802-xx
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
www.ti.com
TIMING REQUIREMENTS
at RL= 1 MΩ, CL= 50 pF, TA= +25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
at SENSE VDD = 1.6 V, VIH = 1.1 × VIT–, VIL = 0.9 × VIT– 1ms
twPulse width at VDD VDD = VIT– + 0.2 V, VDD = VIT– –0.2 V 3
at MR VDD ≥VIT– + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD 100 ns
SWITCHING CHARACTERISTICS
at RL= 1 MΩ, CL= 50 pF, TA= +25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
TPS3801T50 15 25 35
VDD ≥VIT– + 0.2 V,
TPS3800 60 95 140
tdRESET recovery delay time MR ≥0.7 × VDD ms
TPS3801 120 200 280
See timing diagram
TPS3802 240 380 560
VDD ≥VIT– + 0.2 V,
MR to RESET delay VIL = 0.3 × VDD, 15 ns
Propagation (delay) time, high-to-low-level VIH = 0.7 × VDD
tPHL output VDD to RESET delay VIL = VIT– – 0.2 V, 1ms
VIH = VIT– + 0.2 V
SENSE to RESET
TIMING DIAGRAM
NOTE: RESET should not be forced high during the power-up sequence (until VDD > 1.1 V).
4Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
FUNCTION/TRUTH TABLE, TPS380x
L
RESET
H
L
L
0
VDD>VIT
1
0
1
L
MR
H
H
L
VDD
30 kΩ
R2
_
+
R1
VDD
GND
RESET
MR
TPS380x
Oscillator
Reference
Voltage
of 1.14 V
Reset
Logic
+
Timer
_
+
SENSE
RESET
TPS3801−01
Oscillator
Reference
Voltage
of 1.14 V
Reset
Logic
+
Timer
VDD Device Supply
Voltage VDD
TPS3800-xx
TPS3801-xx
TPS3802-xx
www.ti.com
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
FUNCTIONAL BLOCK DIAGRAMS
Figure 1.
Figure 2.
Copyright © 1999–2010, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
−50
−40
−30
−20
−10
0
10
20
30
40
50
−2 0 2 4 6
MR = OPEN
TA = 25°C
VDD − Supply Voltage − V
DD
ISupply Current − − Aµ
TPS3801J25
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
IOH − High-Level Output Current − mA
VDD = 6.0 V
MR = OPEN
TA = 85°C
0 −10 −20 −30 −40 −50
VOH− High-Level Output Voltage − V
TA = -40°C
TA = 0°C
TA = 25°C
0.00
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
IOH − High-Level Output Current − mA
VDD = 2.5 V
MR = OPEN
TA = 85°C
0 −2 −4 −6 −8 −10
VOH− High-Level Output Voltage − V
TA = -40°C
TA = 25°C
TA = 0°C
TPS3800-xx
TPS3801-xx
TPS3802-xx
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
www.ti.com
TYPICAL CHARACTERISTICS
spacer LOW-LEVEL OUTPUT VOLTAGE SUPPLY CURRENT
vs vs
LOW-LEVEL OUTPUT CURRENT SUPPLY VOLTAGE
Figure 3. Figure 4.
HIGH-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE
vs vs
HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT CURRENT
Figure 5. Figure 6.
6Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
MR = OPEN
1.5
1
0.5
00 0.2 0.4 0.6
2
3
3.5
0.8 1
2.5
VDD Threshold Overdrive Voltage − V
− Minimum Pulse Duration at µs
VDD−tw
−500
−400
−300
−200
−100
0
100
−2 0 2 4 6
VDD = 6 V
TA = 25°C
VI − Input Voltage at MR − V
− Input Current − A
IIµ
0.988
0.990
0.992
0.994
0.996
0.998
1
1.002
1.004
1.006
−40 −20 0 20 40 60 80
TPS3801−01
TPS3801E18
TPS3800
TPS3802
− Normalized Input Threshold Voltage − VVIT
TA − Free-Air Temperature at VDD − °C
0.995
0.996
0.997
0.998
0.999
1.000
1.001
TA − Free-Air Temperature at VDD − °C
−40 −20 0 20 40
Normalized Input Threshold Voltage
60 85
MR = OPEN
C
°
VIT (TA)/VIT (25 )
TPS3801S25
TPS3801L30
TPS3801K33
TPS3801I50
TPS3801T50
TPS3800-xx
TPS3801-xx
TPS3802-xx
www.ti.com
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
TYPICAL CHARACTERISTICS (continued)
spacer spacer
INPUT CURRENT MINIMUM PULSE DURATION AT VDD
vs vs
INPUT VOLTAGE AT MR VDD THRESHOLD OVERDRIVE VOLTAGE
Figure 7. Figure 8.
NORMALIZED INPUT THRESHOLD VOLTAGE NORMALIZED INPUT THRESHOLD VOLTAGE
vs vs
FREE-AIR TEMPERATURE AT VDD FREE-AIR TEMPERATURE AT VDD
Figure 9. Figure 10.
Copyright © 1999–2010, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
TPS3800-xx
TPS3801-xx
TPS3802-xx
SLVS219E –AUGUST 1999–REVISED OCTOBER 2010
www.ti.com
Changes from Revision D (December 2006) to Revision E Page
• Added Pull-up resistor value, RESET to the Recommended Operating Conditions Table .................................................. 2
8Submit Documentation Feedback Copyright © 1999–2010, Texas Instruments Incorporated
Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx
PACKAGE OPTION ADDENDUM
www.ti.com 28-Oct-2010
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TPS3800G27DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3800G27DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801-01DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801-01DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801E18DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801E18DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801I50DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801I50DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801J25DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801J25DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801K33DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801K33DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801L30DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801L30DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801T50DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801T50DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3801T50DCKT OBSOLETE SC70 DCK 5 TBD Call TI Call TI Samples Not Available
PACKAGE OPTION ADDENDUM
www.ti.com 28-Oct-2010
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TPS3802K33DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3802K33DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3802L30DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
TPS3802L30DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TPS3800G27DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
TPS3800G27DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801-01DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801E18DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801E18DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
TPS3801I50DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801J25DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801K33DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
TPS3801K33DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801L30DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3801T50DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3
TPS3801T50DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3802K33DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
TPS3802L30DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3
PACKAGE MATERIALS INFORMATION
www.ti.com 12-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TPS3800G27DCKR SC70 DCK 5 3000 180.0 180.0 18.0
TPS3800G27DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801-01DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801E18DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801E18DCKR SC70 DCK 5 3000 180.0 180.0 18.0
TPS3801I50DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801J25DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801K33DCKR SC70 DCK 5 3000 180.0 180.0 18.0
TPS3801K33DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801L30DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3801T50DCKR SC70 DCK 5 3000 180.0 180.0 18.0
TPS3801T50DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3802K33DCKR SC70 DCK 5 3000 202.0 201.0 28.0
TPS3802L30DCKR SC70 DCK 5 3000 202.0 201.0 28.0
PACKAGE MATERIALS INFORMATION
www.ti.com 12-Jul-2012
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP®Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2012, Texas Instruments Incorporated