LITE-ON SEMICONDUCTOR S8M02-B SERIES SCRs 8 AMPERES RMS 600 thru VOLTS Sensitive Gate Sillicon Controlled Rectifiers Reverse Blocking Thyristors TO-220AB FEATURES Blocking Voltage to 600 Volts On-State Current Rating of 8 Amperes RMS at 80 High Surge Current Capability - 80 Amperes Rugged, Economical TO220AB Package Glass Passivated Junctions for Reliability and Uniformity Minimum and Maximum Values of IGT, VGT and IH Specified forEase of Design Immunity to dv/dt - 5 V/msec Minimum at 110 Pb-Free Package B L M C D A K E PIN 1 2 3 F O G I J MECHANICAL DATA N Case: Molded plastic Weight: 0.07 ounces, 2.0 grams H H TO-220AB MAX. MIN. DIM. A 14.22 15.88 B 10.67 9.65 C 3.43 2.54 D 6.86 5.84 E 9.28 8.26 F 6.35 G 14.73 12.70 H 2.79 2.29 I 0.51 1.14 J 0.40 0.67 K 3.53 4.09 L 3.56 4.83 M 1.14 1.40 N 2.92 2.03 O 1.17 1.37 All Dimensions in millimeter PIN ASSIGNMENT 1 Cathode 2 Anode 3 Gate 4 Anode MAXIMUM RATINGS (Tj= 25 unless otherwise noticed) Rating Symbol Value Unit VDRM, VRRM 600 Volts IT(RMS) 8 Amp ITSM 80 Amp It 26.5 As PGM 5.0 Watt PG(AV) 0.5 Watt Forward Peak Gate Current (Pulse Width 1.0 us, Tc = 80 ) IGM 2.0 Amp Operating Junction Temperature Range TJ -40 to +110 Tstg -40 to +150 Peak Repetitive Off- State Voltage (TJ= -40 to 125 , Sine Wave, 50 to 60 Hz; Gate Open) S8M02-600B On-State RMS Current (180 Conduction Angles, TC = 80 ) Peak Non-Repetitive Surge Current (1/2 Cycle, SIne Wave 60 Hz, Tj = 25 ) Circuit Fusing Consideration (t = 8.3 ms) Forward Peak Gate Power ( Pulse Width 1.0 us, Tc = 80 ) Forward Average Gate Power ( t= 8.3 ms, Tc = 80 ) Storage Temperature Range Notice: (1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded 2 2 REV. 8, Oct-20010, KTXC09 RATING AND CHARACTERISTIC CURVES S8M02-B SERIES THERMAL CHARACTERISTICS Characteristic Thermal Resistance - Junction to Case - Junction to Ambient Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds Symbol Value Unit RthJC RthJA 2.2 62.5 /W TL 260 ELECTRICAL CHARACTERISTICS (TJ=25 unless otherwise noted) Characteristics Symbol Min Typ Max Unit IDRM IRRM ------- ------- 10 500 uA Peak Forward On-State Voltage (ITM= 16A Peak @Tp 2.0 ms, Duty Cycle 2%) VTM ---- ---- 1.8 Volts Gate Trigger Current (VD = 12 V; RL = 100 Ohms) IGT 5.0 25 200 uA Holding Current (VD = 12 V, Gate Open, Initiating Current = 200 mA) IH ---- 0.5 6.0 mA Latch Current (VD = 12 V, IG = 200 uA) IL ---- 0.6 8.0 mA Gate Trigger Voltage (VD = 12 V; RL =100 Ohms) VGT 0.3 0.65 1.0 Volts Gate Non Trigger Voltage (VD = 12 V; RL =100 Ohms), TJ=110 VGD 0.2 ---- ---- Volts Critical Rate of Rise of Off-State Voltage (VD=67% VDRM, RGK=1K Ohm, CGK= 1 uF, TJ=110) dv/dt 5.0 15 ---- V/us Repetitive Critical Rate of Rise of On-State Current IPK=50A, Pw=40 usec, diG/dt=1A/us, Igt=10mA di/dt ---- ---- 100 A/us OFF CHARACTERISTICS Peak Reptitive Forward or Reverse Blocking Current (VD=Rated VDRM and VRRM; RGK=1K Ohms) TJ=25 TJ=110 ON CHARACTERISTICS DYNAMIC CHARACTERISTICS *Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. RATING AND CHARACTERISTIC CURVES S8M02-B SERIES RATING AND CHARACTERISTIC CURVES S8M02-B SERIES Legal Disclaimer Notice S8M02-B SERIES Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.