Crimp-Snap D D*U B Machined or Stamped Contacts, Size 20 Part Numbers Crimp Snap-In Contacts Supplied Separately i (9.52) MAX. Tooling Pages 232-234 Standard Shell Dimensions Page 73 Mounting Method Detail Page 6 Tin Shells Yellow Chromate Over Cadmium Shells Part Numbers Part Numbers Number of With Dimples Without Dimples Connectors Contacts (Pin Only) (Socket} Number of Connectors Packaged (Shell Size) Without Contacts Without Contacts Positions Without With Machined 9{e) DEU-9P-K87-FD _DEU-95-A197-FO (Shell Size) Contacts Contacts# 15(A) DAU-15P-K87-FO DAU-15S-A197-F0 (8) DEU9P or S-FO DEUSP ar $ 25(8) DBU-25P-K87-FO DBU-25-A197-FO TSI) DAUISP or SFO DAUISP or S 37(C) DCU-37P-K87-FO _DCU-37S-A197-FO 25(8) DBUZSP or S-FO____DBUZSP or 40(0) DOU-5OP-K87-F0 _DDU-50S-A197-FD 3i(C) DCUS7P or SFO DCU37P ar 50(0) DDUSOP or S-FO DDUSOP or Clinch Nut and Float Mounting Options Available: Add: E = 4-40 Clinch Nut Y = Float Mounting *Pin contact is 030-1952-000/Socket contact is 030-1953-000 Example: DBUE25P-K87-F0 Machined Crimp Contacts @ Machined contacts are furnished loose piece for Wire Accom- B Cc use with manual and semi-automatic machines. Description Part Number modation 002 (0.05) Max. Hand Tool Pin 20 030-1952-000 20, 22, 24 .045(1.14) 541(13.74) CCT-DCM-1 c B Pin 20-18 030-1954-000 (1) 18 or (2) #22 .066(1.68) .867(22.02) CCT-DCM-1 | | { Pin 20-26 030-1952-002 26, 28, 30 .025(0.63) 541(13.74) CCT-DEM-2 oo E33 Socket 20 030-1953-000 20, 22, 24 045(1.14) 23(13.28} CCT-DCM-1 Socket 20-18 030-1955-000 (1) 18 or (2) #22 .066(1.68) 844(21.56) CCT-OCM-1 , Socket 20-26 030-1953-002 26, 28, 30 .025(0.63) 523(13.28) CCT-DCM-2 | NOTE for Size 20-18 contacts only: Shrink sleeving is suggested on the crimp pot to prevent contacts fram touching. a | Plastic Insertion / Extraction Tool CIET-20HD Metal Extraction Tool - CET-200 Stamped Crimp Contacts /Reeled Non-Insulation Support Contact Contact Part Number Contacts Size Wire Accommodation Socket Par Reel Hand Tool 20-18 AWG #18 thru 22 0110238-165 0110238-166 7,500 CCT-D*C-4 (For AWG #24 consult factory) 20 AWG #20 thru 28 0110238-34 D110238-35 10,000 CCT-D*C-4 (For AWG #30 consult factory) Insulation Support Contact Part Number Contact Wire Accommodation Pin Socket Per Reel Hand Tool AWG #22-#26 D110238-428 0110238-434 7,500 CCTP-0*C-10 AWG #28 thru #32 D110238-431 0110238-436 7,500 CCTP-D*C-8 Semi-Automatic Tooling Pages 223-225 Plastic Insertion/Extraction Tool CIET-20HD Metal Extraction Tool CET-20D Highlighted part numbers indicate standard product; usually available with shorter lead times. ITT Cannon Dimensions are shown in inches (millimeters). i ions subject to change. % For technical assistance, price or delivery information, call your local technical sales office or distributor. D 74E MM 4772659 0007478 O00 mecq, Crimp-Snap D O D*A Industry Standard, Stamped Contacts Size 20 Performance and Material Specifications MATERIALS AND FINISHES PERFORMANCE SPECIFICATIONS @ Material Finish Wire Size See contact ordering information. Shell Steel Tin or Yellow chromate over cadmium or zinc Current Rating - #20 contact, Amps/#22 contact, 2 amps Insulator UL 94V-0 rated Thermoplastic, Glass-filled, Voltage Rating - 1000 VAC sea level color black Temperature Rating ~ 55C to + 105C ahd Copper alloy Gold over nickel Contact Resistance 15 mo Stamped and Formed Crimp Type Copper alloy Gold over nickel Float Mount Hardware Stainless Steel Passivated ULL. File No. E8572 CSA File No. 85691-2 Dimensions / Part Numbers Crimp Snap-In Contacts Supplied Separately Connectors With Tin Shells (Commercial Standard) Connectors With Yellow Chromate Number of Part Numbers Positions Pin Connector Number of Part Numbers (Shell Size) With Grounding Indents Socket Connector {Shell Size} Pin Connector Socket Connector 9(E} DEASP-K87-FO DEA9S-A197-F0 9 (E} DEASP-FO DEA9S-ED @ 15(A) DAAI5P-K87-FO DAA15S-A197-F0 15 (Al DAATSP-FO DAA15S-FO 25(B} DBA25P-K87-FO DBA25S-A197-FO 25 (B) DBA25P-FO DBA25S-FO CD 37{C) DCA37P-K87-FO DCA375-A197-F0 37 (C) DCA37P-FO DCA37S-FO 50(D) DDASOP-K87-FO DDA50S-A197-F0 50 (0) DOASOP-FO ODA50S-FO 430 _.| (10.83) Clinch Nut and Float Mounting Options Available: Standard Shell Dimensions Page 73 Add: E = 4-40 Clinch Nut Mounting Method Detail - Page 6 = Float Mounting Example: OBAE25P-K87-FO Economy, Standard Contacts Size 20 Stamped contacts with insulation support are supplied on reels of 10,000 for use with semi- automatic strip and crimp machines, or loose for use with hand crimp tooling. Two sizes are available to accommodate wire ranges 20-28 AWG. Semi-Automatic Tooling Pages 223-225 Loose Contacts (Order Multiples of 100) Reeled Contacts 10,000 Pieces per Reel Part Number Part Number Pin Contact Socket Contact Pin Contact Socket Contact 24-28 AWG 20-24 AWG 24-28 AWG 20-24 AWG 24-28 AWG 20-24 AWG 24-28 AWG 20-24 AWG Gold over Nickel _ _ _ B110238-476 110238-475 0110238-478 B110238-477 30 Gold over Nickel 030-2487-015 030-2487-014 030-2488-015 030-2488-014 B110238-472 0110238-471 0110238-474 0110238-473 Highlighted part numbers indicate standard product; usually available with shorter lead times. Tooling Hand Tool Extraction Tool Description Part Number Wire Size Description Part Number 20-24 CIET-D*A-20-24 980-0008-135 -D*A-1 995-2000- cer 2000-000 24-28 CIET-D*A-24-28 980-0008-136 e Di i h in inch illimeters). 2 ITT Cannon mesons ae she a (ilies) For technical assistance. price or delivery information, call your local technical sates office or distributor. D ?78E MM 4772659 0007477 174D Subminiature Reference Panel Cutouts Standard Cutout 032(0.81) RADIUS MAX, TYP. A B 10 + 2 G+ : Ley | i graowss YF t Tr 5 PLACES PF Rear mounting of Front mounting of standard shell standard shell , , FULL, RADIUS p=___- Optional Cutout (For Rear Mounting) Rear mounting of Front mounting of 3 / 5 float mount shell reverse float mount shell arti @ (Y-code) (-code) oh Connector Mounting A B C 0 E F G H J Size Method .005 (0.13) = .005 (0.13) = 005 (0.13) .005 (0.13) = 005 (0.13) = 005 (0.13) = .002 (0.05) = .002 (0.05) +.002 (0.05) A Standard Front Mounting 1.202 (30.53) 601 (15.26) 1.312 (33.32} .656 (16.66) 513 (13.03) .257 (6.52) 120 (3.04) 060 (1.52) 083 (2.10) Rear Mounting 1.134 (28.80) 567 (14.40) 1.312 (33.32) .656 (16.66) 449 (11.40) 229 (5.71) 120 (3.04) 060 (1.52) 132 (3.35) A Float Front Mounting -1..234 (31.34) 617 (15.67) 1.312 (33.32) .656 (16.66) 545 (13.84) 273 (6.93) 088 (2.23) 044 (1.11) 083 (2.10) Rear Mounting 1.166 (29.61) 583 (14.80) 1.312 (33.32) .656 (16.66) ABI (12.21) 241 (6.12) 088 (2.23) 044 (1.11) 132 (3.35) B Standard Front Mounting =-1.743 (44.27) B72 (22.14) 1.852 (47.04} 926 (23.52) 513 (13.03) .257 (6.52) 120 (3.04) .060 (1.52) 083 (2.10) Rear Mounting 1,674 (42.51) 837 (21.25) 1.852 (47.04) 926 (23.52) 449 (11.40) 225 (5.71) 120 (3.04) 060 (1.52) .132 (3.35) B Float Front Mounting 1.775 (45.08) B88 (22.55) 1.852 (47.04) 426 (23.52) 545 (13.84) .273 (6.93) 088 (2.23) 044 (1.11) 083 (2.10) Rear Mounting 1.706 (43.33) 853 (21.66) 1.852 (47.04) 926 (23.52) 481 (12.21) 241 (6.12) .088 (2.23) 044 (1,11) 132 (3.35) C Standard Front Mounting 2.391 (60.73) 1.996 (30.37) 2.500 (63.50) 1.250 (31.75) 513 (13.03) 257 (6.52) -120 (3.04) 060 (1.52) 083 (2.10) Rear Mounting 2.326 (59.08) 1.163 (29.54) 2.500 (63.50) 1.250 (31.75) 449 (11.40) 225 (5.71) 120 (3.04) 060 (1.52) 132 (3.35) C Float Front Mounting -2.423 (61.54) 1.212 (30.78) 2.500 (63.50) 1.250 (31.75) 545 (13.84) .273 (6.93) 088 (2.23) 044 (1.11) 083 (2.10) Rear Mounting 2.354 (59.79) 1.177 (29.89) 2.500 (63.50) = 1.250 (31.75) 481 (12.21) 241 (6.12) 088 (2.23) 044 (1.11) 132 (3.35) O Standard Front Mounting 2.297 (58.34) 1.149 (29.18) 2.406 (61.11) 1.203 (30.55) 623 (15.82) 312 (7.92) 120 (3.04) 060 (1.52) 083 (2.10) Rear Mounting 2.218 (56.33) 1.109 (28.16} 2.406 (61.11) 1.203 (30.55) 555 (14.09) 278 (7.06) 120 (3.04) 060 (1.52) 132 (3.35) D Float Front Mounting 2.329 (59.15) 1.165 (29.59) 2.406 (61.11) 1.203 (30.55) 655 (16.63) 328 (8.33) 088 (2.23) 044 (1.11) 083 (2.10) Rear Mounting 2.250 (57.15) 1.125 (28.57) 2.406 (67.11) 1.203 (30.55) 587 (14.90) 2947.46) 088 (2.23) 044 (1.11) 132 (3.35) E Standard Front Mounting 874 (22.19) 437 (11,09) 984 (24.99) 492 (12.49) 513 (13.03) 257 (6.52) 120(3.04) =060(1.52) 083 (2.10) @ Rear Mounting 806 (20.47) 403 (10.23) .984(24.99) 492 (12.49) 449 (11.40) 225 (5.71) 120(3.04) .060(1.52) 132 (3.35) E Float Front Mounting 906 (23.01) 453(11.50) 984 (24.99) 492 (12.49) 545 (13.84) 273 (6.93) .088.(2.23) 044 (1.11) 083 (2.10) Rear Mounting 838 (21.28) 419 (10.64) 984 (24.99) 492 (12.49) 481 (12.21) 241 (6.12) 088 (2.23) 044 (7.11) 132 (3.35) Contact Arrangements Standard Face View Pin Insert 12:13:14 15 Shell Size E A Contact Arrangement q 15 Contact Size #20 #20 Shell Size C 0 Contact Arrangement 37 50 Contact Size #20 #20 TTT C Dimensions are shown in inches (millimeters). annon Dimensions subject to change. 7] Far tachnieal accictonge, price or delivery information, call your loca! technical sales office or distributor. D 76E MM 4772659 OOO7S46R 4oLD Subminiature Reference Contact Arrangements High Density DE-15 DA-26 (ees ets Wess) COCCI, DC-62 DD-78 Panel Mounting " Pin Front Mounting, | Pin Front Mounting: = Pina Mong Socket Frowt Mounting . Figure tA: Pin Rear - ars a? oe MAX, ROLL. 7 Socket Reverse ; Socket Reverse Socket Float Mounting ~ Socket Float Mounting: eS Float Mounting eo Float Mounting Figure 9 bas BUR. ot Alon 0 ef Seo ste a : Figure 3 a A B cC H Combination of Mated Connectors +030 (+0.76) +030 (+0.76) +030 {+0.76) F +030 (+0.76) Fig. No. Size Pin (See Note Below) Socket .000 (-0) .000 (-0) .000 (0) +010 (0.25) 000 (0) 1 AE Standard Standard 250 (6.35} 340 (8.63) 295 (7.49) - .295 (7.49) 1 8.C,D Standard Standard .238 (6.04) 343 (8.71) .298 (7.56) - .283 (7.18} 2 ALE Standard Float Mount 218 (5.53) - .263 (6.68} -120 (3.04) - 2 B,C, 0 Standard Float Mount 206 (5.23) - .266 (6.75) -120 (3.04) - e 2 AE Float Mount Standard 218 (5.53) - .263 (6.68) 120 (3.04) - 2 B, , 0 Float Mount Standard 206 (5.23) - .251 (6.37) 130 (3.30) - 3 AE Standard Rev. Float Mount - 358 (9.09} 313 (7,95) 120 (3.04) - 3 B,C, D Standard Rev. Float Mount - 361 (9.16) 301 (7.64) .120 (3.04) - 3 AE Rev. Float Mount Standard - .358 (9.09) 313 (7.95) 120 (3.04) - 3 B,C, D Rev, Float Mount Standard - 355 (9.01} 310 (7.87) -130 (3.30) - NOTES: 1. A,B, Cand H are dimensions between panels and represent the recommended limit to be used in the design of the connector mounting method. 2. It is recommended that only one assembly, either pin or socket, be float mounted. 3. Standard pin assemblies contained .015 (0.38) thick front shefls on E and A sizes; .024 (061) thick front shells on B, C, and D sizes. 4. Standard connectors accommodate a #4 screw. Float mount connectors accommodate a #2 screw. Di i h in inch illimeters}. 72 ITT Cannon iene ae shun he inte) For technical assistance, price or delivery information, call your tocal technical sales office or distributor. D 78E MM 4772659 OOO?754? 315 aD 786 MM 4772659 9007548 254 Mm D Subminiature Reference Standard D Shell Dimensions TWO FLOAT MOUNTING HOLES 089 (2.26) +: .003 (0:08) DIA. _ (STD. MOUNT .420 (3.05) DIA. THROUGH HOLES) A Be Bi c p Y E G Hl J K l a Shell Sie =.015 (0.38) +.010 (0.25) +.010 (0.25) +008 (0.2) +.010 40.25) +010 (0.25) +.06 (0.4) Ma, Max, 040 (0.25) +.010 10.25) Max Max. DE-9P 12133081) 667 (16.94) 984 (26.99) 329 (8.36) .494(12.55) 765 (19.41) 430 (10.92) 032 (0.81) 236 (5.99) 075 (1.90) 438 (11.12) DE-9S 1.213 (3081) 642 (1631) 984 (24.99) 310 (787) 494(12.55) 765 (19.41) 430 (10.92) 032 40.81) 242 (6.15) 075 (7.90) 438 (11.12) DAP 15393914) 995 (25.27) 1.311 (33.32) 329 (8.36) 494 (12.55) 1.088 (27.64) 430 (10.92) 032 (0.81) 236 (5.99) 075 (1.90) 438 (11.12) @ DA15S 1.539 (39.14) 970 (24.64) = (1.311 (33.32) 310 (7.87) = .494(12.55) 1.088 (27.64) 430 (10.92) 032 (0.81) .242(6.15) 075 (1.90) 438 (11.12) DB-25P 2.087 (53.03) | 1.535 (38.99) 1.950(47.04) | 329 (8.36) 494 (12.55) 1.630 (41.40) 430 (10.92) 036 (0.95) 232 (5.99) 075 (1.90) 438 (11.12) DB-258 2.087 (53.03) 1.510 (38.35) 1.850(47.04) 310 (7.87) 494 (12.55) 1.630 (41.40) 430 (10.92) 032 (0.81) 242 (6.15) 0751.90) 438(11.12) DU-37P 2.728 (69.31) 2.183 (55.45) 2500 (63.50) 329 (8.36) 494 (1255) 2.278 (57.86) 430 (10.92) 036 (0.91) 232 (5.99) .075(7.90) .438(11.12) DC-378 2.728 (69.31) 2158 (54.81) | 2.500 (63.50) 310 (7.87) 494 (12.55) 2.278 (57.86) 430 (10.92) 032 (0.81) 242 (6.15) .075(1.90} .438,(11.12) DD-50P 2.634 (66.92) 2.080 (52.83) 2.406(61.11) | 436 (11.07) 605 (15.37) 2.183 455.45) 542 (13.77) 036 (0.91) 232 (5.99) 075 (1.90) 438 (71.12) DD-50S 2.634 (66.92) 2.063 (52.40) 2.806(61.11) 422 (10.72) 605 (15.37) 2.183 (55.45) 542 (13.77) 032 (0.81) 242 (6.15) 075 (1.90) 438 (11.12) NOTE: Dimensions B, D, G and H are measured as outside dimensions at the bottom of the draw. B and D are the 0.0. dims. for socket side; B and D are the inside dims. for pin side. TTT Cann n Dimensions are shown in inches (millimeters). 0 Dimensions subject to change. 73 For technical assistance, price or delivery information, call your local technical sales office or distributor.Solder Cup D D ?78E MM 4772659 0007481 LTS D* and D*M Performance and Material Specifications MATERIALS AND FINISHES MECHANICAL FEATURES PERFORMANCE SPECIFICATIONS Material Finish Coupling Friction and lack accessories Temperature Rating 55C to + 105C @ Shell Steel Tin or yellow chromate Polarization Keystone-shaped shells Dielectric Withstanding Voltage 1000 VAC sea level over zine or cadmium Wire {Contact Size #20 AWG Insulator Thermoplastic-UL 94V-0 Current Rating #20 contact 5 Amps Contacts Pin: Brass Gold Over nickel Socket: Phosphor Branze Dimensions /Part NumbersStamped Contacts Number of Contacts Yellow Chromate Tin (Shell Size) Part Number Part Number DEP DESPK8? ale) DESS DESSAT97 DAISP DATSPKE7 1S(A) DATS DATSSA197 DB25P 1B25PK87 256) DB25S DB25SA197 pe37P DL37PK87 snc) DC37S DC37SA197 e soi) BDSOP DDSOPK87 DD50S DDS0SA197 Dimensions /Part Numbers Machined Contacts (Non-Removable) With .120 Through-Mounting Holes Tin/ Yellow Chromate/ Tin/ Layout Gold Over Nickel Gold Over Nickel 30 in. Gold DE-98 DEM9SA197 DEM95 DEMISK126 DE-9P DEM9PK8? DEMOP DEM9PK127 DA-158 DAMI5SA197 DAM15S DAM15SK126 @ DA-15P DAMT5PKQ7 DAMI5P DAM15PK127 DB-258 DBM25SA197 DBM25S DBM25SK126 DB-25P DBM25PK87 DBM25P DBM25PK127 DL-37S DEM37SA197 DCM37S DCM37SK126 DC-37P DEM37PK87 OCM37? DCM37PK127 DD-50S DDMS50SA197 DDM50S DOMSOSK126 [hs 0D-50P DDMS50PK87 DOMS50P DOMS50PK127 L Mounting Options Available: 390 ooy--| 4-40 Clinch Nut Add E to Part Number After M". MAX. Float Mount Add Y to Part Number After M. Performance Specifications Page 2 (Can be used in front or rear panel mount applications) @ Standard Shell Dimensions Page 73 Example: DBME25SA197 DEMY9PK87 Mounting Method Detail Page 6 Highlighted part numbers indicate standard product; usually available with shorter lead times. Mounting Option Dimensions Solder Cup Connectors pera oe a8 .120 + .005 fa (3.05 + 0.13} ] : = 130 (3.30). MAX, a 0g 9 (4. oar 034 (0.79) TOTAL DIAMETRICAL FLOAT BE, > WASHER | | & Dorr ees SSS OVERALL FREE __.| [L FLOAT .004~.012 049: it aay : (0.10}-{0.30) @ Standard-Through-Hole, sin Mt -sFloat Mount , It is recommended that only one assembly, either pin or socket, be float mounted. [TT Cann Dimensions are shown in inches (millimeters). on Dimensions subject to change. For technical assistance, price or delivery information, call your local technical sales office or distributor. cerrard ee |