UA120 - Altech Corporation - Datasheet.Support

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com

FA UA

Undervoltage T rip

Re-power your system under controlled

conditions following a power loss or

serious undervoltage. Altech/Sursum UA

Undervoltage Trips are coupled to the

tripping latch pins of the V-EA or MA to

which they are attached, reliably produc-

ing trips at the drop-out voltage and

preventing resetting when less than 85%

line voltage is present. The Undervoltage

Trip is provided with at least 6-inch

pigtails of stranded fixture wire for hook-

up to the V-EA or MA line terminals.

• Reset-Hold Voltage = 0.85 x Ve

• Drop-Out Voltage = 0.35 to 0.7 x Ve

* Please consult Altech for your 50Hz

application needs.

aOne device with wide voltage range.

T ype/ Line Voltage

Cat. No. 60Hz*

UA120 120VAC

UA208 208VAC

UA240 240VAC

UA277 277VAC

UA415 415VAC

UA480 480VAC

Std.Pk.: 1

Unit Weight: 70 grams (0.16 lb.)

Width: 17.5mm (.689in.)

Trip/Coil

Type/ Voltage Max. Coil

Cat. No. AC/DC Current Approvals

FA12U 12V 1.3A

FA24U 24V 0.6A

FA48U 48-72V 0.2A

FA110Ua110V 0.25A

FA110Ua220V 0.5A

FA110Ua380VAC 0.8A

Std.Pk.: 1

Unit Weight: 120 grams (0.27 lb.)

Width: 17.5mm (.689in.)

Shunt T rip

Coil actuated, the FA Shunt Trip allows

electrical remote tripping of a breaker. It

is trip-free and the housing and terminal

specifications are the same as for V-EA

miniature circuit breakers.The Shunt Trip

contains its own contacts which break

the tripping power circuit when tripped. It

is available with trip-coils in most

standard control voltages. The device is

UL and CSA listed for general use.

V-EA and MA

Circuit Breaker

Accessories

Accessories can be factory or field

mounted on V-EA miniature circuit

breakers and MA motor protection

switches for enhanced control and

monitoring capabilities. Field

mounting kits include all necessary

parts and instructions. Accessories

can be gang mounted on a single

breaker (the Auxiliary Switch in the

outside position). The mounting

arrangement links the internal latch-

pins for the tripping mechanisms,

ensuring simultaneous trips.

Handles are linked to simplify

manual resetting.

Two isolated, feedthrough Form X and

Y contacts are provided: one with the

same form as the breaker (HS designa-

tion, closed auxiliary contacts when

breaker is on and breaker contacts are

closed); and one with the opposite form

as the breaker (HO designation, closed

auxiliary contacts when breaker is

tripped and breaker contacts are open).

Upper level terminals are metal-

stamped "HS" and lower level terminals

are stamped "HO", providing clear iden-

tification for drawings and physical

wiring (line/load on either terminal).

Altech/Sursum H Auxiliary Switch is

suitable for logic interrogation and for

use as a two-circuit Form C contact. It

can also function as an auxiliary switch

for control circuits. The H11U is UL and

CSA listed for general use.

Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 33

Auxiliary Switch

Lock-out ❶

Cat. No. EASS

Prevent inadvertent

resetting of the V-EA or MA

during maintenance.

Fits 1/4” pad lock.

Cooling Spacer

Cat. No. 15.960