Features
Industry standard size
Industry standard pinout
7.6 mm (0.3 inch) DIP single
15.24 mm (0.6 inch) DIP dual
Leads on 2.54 mm (0.1 inch) centers
Choice of colors
AlGaAs Red, High Efficiency Red, Orange, Yellow, Green
Excellent appearance
Evenly lighted segments
Mitered corners on segments
Gray package gives optimum contrast
Black surface and color tinted epoxy (HDSP-F161 only)
±50° viewing angle
Design flexibility
Common anode or common cathode
Single and dual digits
Right hand decimal point
±1. overflow character
HDSP-F15x/F16x Series
HDSP-F20x/F30x/F40x/F50x Series
HDSP-G00x/G15x Series
HDSP-G20x/G30x/G40x/G50x Series
AlGaAs
Red[1] HER Orange Yellow Green Package
HDSP- HDSP- HDSP- HDSP- HDSP- Description Drawing
F151 F201 F401 F301 F501 Common Anode Right Hand Decimal A
F161 Common Anode Right Hand Decimal A
F153 F203 F403 F303 F503 Common Cathode Right Hand Decimal B
F157 F207 F407 F307 F507 Common Anode ±1. Overflow C
F158 F208 F408 F308 F508 Common Cathode ±1. Overflow D
G151 G201 G401 G301 G501 Two Digit Common Anode
Right Hand Decimal E
G153 G203 G403 G303 G503 Two Digit Common Cathode
Right Hand Decimal F
Devices
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low current operation.
Description
The 10 mm (0.40 inch) LED seven segment displays
are Avago’s most space-efficient character size. They
are designed for viewing distances up to 4.5 metres (15
feet). These devices use an industry standard size
package and pinout. The dual numeric, single numeric,
and ±1. overflow devices feature a right hand decimal
point. All devices are available as either common
anode or common cathode.
Typical applications include instruments, point of sale
terminals, and appliances.
Categorized for luminous intensity
Yellow and Green categorized for color
Use of like categories yields a uniform display
High light output
High peak current
Excellent for long digit string multiplexing
Intensity and color selection option
Sunlight viewable AlGaAs
HDSP-F15x Series
10 mm (0.40 inch) Seven Segment Displays
Data Sheet
2
Part Numbering System
5082 -xxxx-xxxxx
HDSP - x xx x-xxxxx Mechanical Options[1]
00: No mechanical option
16: Special dimensional tolerances
Color Bin Options[1,2]
0: No color bin limitation
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to respective data sheet
Package[1]
F: 10 mm (0.4 inch) Single Digit Seven Segment Display
G: 10 mm (0.4 inch) Dual Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
3
Package Dimensions
4
FUNCTION
PIN E F
1E CATHODE NO. 1 E ANODE NO. 1
2D CATHODE NO. 1 D ANODE NO. 1
3C CATHODE NO. 1 C ANODE NO. 1
4DP CATHODE NO. 1 DP ANODE NO. 1
5E CATHODE NO. 2 E ANODE NO. 2
6D CATHODE NO. 2 D ANODE NO. 2
7G CATHODE NO. 2 G ANODE NO. 2
8C CATHODE NO. 2 C ANODE NO. 2
9CP CATHODE NO. 2 DP ANODE NO. 2
10 B CATHODE NO. 2 B ANODE NO. 2
11 A CATHODE NO. 2 A ANODE NO. 2
12 F CATHODE NO. 2 F ANODE NO. 2
13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE
14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE
15 B CATHODE NO. 1 B ANODE NO. 1
16 A CATHODE NO. 1 A ANODE NO. 1
17 G CATHODE NO. 1 G ANODE NO. 1
18 F CATHODE NO. 1 F ANODE NO. 1
FUNCTION
PIN A B C D
1ANODE[1] CATHODE[2] ANODE[1] CATHODE[2]
2CATHODE f ANODE f CATHODE PLUS ANODE PLUS
3 CATHODE gANODE g CATHODE MINUS ANODE MINUS
4CATHODE e ANODE e NC NC
5CATHODE d ANODE d NC NC
6ANODE[1] CATHODE[2] ANODE[1] CATHODE[2]
7CATHODE DP ANODE DP CATHODE DP ANODE DP
8CATHODE c ANODE c CATHODE c ANODE c
9CATHODE b ANODE b CATHODE b ANODE b
10 CATHODE a ANODE a NC NC
NOTES:
1. REDUNDANT ANODES
2. REDUNDANT CATHODES
Internal Circuit Diagram
HOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX.
5
Electrical/Optical Characteristics at TA = 25°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Avago
components sales office or an authorized distributor.
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2,5] IV7.5 15.0 mcd IF = 20 mA
(Digit Average)
Forward Voltage/Segment or DP VF1.8 2.2 V IF = 20 mA
HDSP- Peak Wavelength λPEAK 645 nm
F15x/
F16x/ Dominant Wavelength[3] λd637 nm
G15x Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 µA
Temperature Coefficient of VF/°C-2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-PIN 320 °C/W/Seg
Junction-to-Pin
AlGaAs Red
Absolute Maximum Ratings
AlGaAs Red HER/Orange Yellow Green
HDSP- HDSP- HDSP- HDSP-
F15x/F16x F20x/G20x/ F30x/G30x F50x/G50x
Description G15x Series G40x Series Series Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per 160[1] 90[3] 60[5] 90[7] mA
Segment or DP
DC Forward Current per Segment 40[2] 30[4] 20[6] 30[8] mA
or DP
Operating Temperature Range –20 to +100[9] –40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse V oltage per Segment or DP 3.0 V
Wavesoldering Temperature for 250 °C
3 Seconds (1.59 mm [0.063 in.]
below body)
6
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] IV420 1200 µcd IF = 5 mA
(Digit Average)
Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
HDSP- Peak Wavelength λPEAK 635 nm
F20x/
G20x Dominant Wavelength[3] λd626 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of VF/°C-2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-PIN 320 °C/W/Seg
Junction-to-Pin
High Efficiency Red
Electrical/Optical Characteristics at TA = 25°C, continued
Orange
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] IV420 1200 µcd IF = 5 mA
(Digit Average)
Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
Peak Wavelength lPEAK 600 nm
Dominant Wavelength[3] ld603 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of VF/°C-2 mV/°C
VF/Segment or DP
Thermal Resistance LED Rl\qJ-PIN 320 °C/W/Seg
Junction-to-Pin
HDSP-
F40x/
G40x
7
Yellow
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] 290 800 µcd IF = 5 mA
(Digit Average) IV
Forward Voltage/Segment or DP VF2.2 2.5 V IF = 20 mA
HDSP- Peak Wavelength λPEAK 583 nm
F30x/
G30x Dominant Wavelength[3,6] λd581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] VR3.0 40 V IR = 100 µA
Temperature Coefficient of VF/°C-2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-PIN 320 °C/W/Seg
Junction-to-Pin
High Performance Green
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The
category is designated by a number adjacent to the luminous intensity category letter.
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
Luminous Intensity/Segment[1,2] IV1030 3500 µcd IF = 10 mA
(Digit Average)
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA
HDSP- Peak Wavelength λPEAK 566 nm
F50x/
G50x Dominant Wavelength[3,6] λd571 577 nm
Reverse Voltage/Segment or DP[4] VR3.0 50 V IR = 100 µA
Temperature Coefficient of VF/°C-2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-PIN 320 °C/W/Seg
Junction-to-Pin
Electrical/Optical Characteristics at TA = 25°C, continued
8
Figure 4. Relative Luminous Intensity vs. DC
Forward Current. Figure 5. Relative Efficiency (Luminous Intensity
per Unit Current) vs. Peak Current.
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs. Pulse
Duration – AlGaAs Red.
Figure 2. Maximum Allowable DC Current vs.
Ambient Temperature. Figure 3. Forward Current vs. Forward Voltage.
I
DC
MAX. – MAXIMUM DC CURRENT
PER SEGMENT – mA
20
0
T
A
– AMBIENT TEMPERATURE – °C
30 90 120
50
30
7050
AlGaAs RED
10
20
5
15
25
35
40 60 80 100 110
40
45 Rθ
J-A
= 770°C/W
IF – FORWARD CURRENT PER SEGMENT – mA
0
0
VF – FORWARD VOLTAGE – V
160
100
60
2.0 4.0
80
20
1.0 3.0
40
AlGaAs RED
0.5 1.5 2.5 3.5
120
140
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
0
0
I
F
– FORWARD CURRENT PER SEGMENT – mA
2.00
1.50
1.25
0.75
0.25
20 40
1.75
1.00
0.50
10 30
5152535
AlGaAs RED
1.4
0.5
IPEAK – PEAK FORWARD CURRENT 
PER SEGMENT – mA
0.6
0.8
1.0
1.2
150.05.0 50.0
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)
2.0
1.0 3.0 20.010.0 30.0 100.0 500.0
AlGaAs RED
9
HER, Orange, Yellow, Green
Figure 6. Maximum Tolerable Peak Current vs.
Pulse Duration – HER, Orange. Figure 7. Maximum Tolerable Peak Current vs.
Pulse Duration – Yellow.
Figure 10. Forward Current vs.
Forward Voltage Characteristics. Figure 11. Relative Luminous Intensity
vs. DC Forward Current.
Figure 8. Maximum Tolerable Peak Current
vs. Pulse Duration – Green. Figure 9. Maximum Allowable DC Current
vs. Ambient Temperature.
Figure 12. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak
Current.
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-F15x/F16x/G15x
IV Bin Category Min. Max.
L8.67 15.90
M13.00 23.80
N19.50 35.80
O29.30 53.60
P43.90 80.50
HDSP-F20x/G20x/F40x/G40x
IV Bin Category Min. Max.
C0.485 0.890
D0.728 1.333
E1.091 2.000
F1.636 3.000
G2.454 4.500
H3.682 6.751
HER/Orange
HDSP-F30x/G30x
IV Bin Category Min. Max.
C0.297 0.543
D0.445 0.817
E0.669 1.225
F1.003 1.838
G1.504 2.758
H2.256 4.137
Yellow
HDSP-F50x/G50x
IV Bin Category Min. Max.
H1.54 2.82
I2.31 4.23
J3.46 6.34
K5.18 9.50
L7.78 14.26
Green
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3584.00 587.50
2586.50 590.00
4589.00 592.50
Green 2 573.00 577.00
3570.00 574.00
4567.00 571.00
5564.00 568.00
Color Categories
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local Avago
representatives for further clarification/information.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloro-
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For further information on
soldering LEDs, please refer to
Application Note 1027.
10
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-2222EN
5989-2346EN June 23, 2006