April 2008 Rev 2 1/19
19
Features
■The worldwide best RDS(on)* area amongst the
fast recovery diode devices
■100% avalanche tested
■Low input capacitance and gate charge
■Low gate input resistance
■Extremely high dv/dt and avalanche
capabilities
Application
■Switching applications
Description
The FDmesh™ II series belongs to the second
generation of MDmesh™ technology. This
revolutionary Power MOSFET associates a new
vertical structure to the company's strip layout
and associates all advantages of reduced on-
resistance and fast switching with an intrinsic fast-
recovery body diode.Strongly recommended for
bridge topologies, in ZVS phase-shift converters.
Figure 1. Internal schematic diagram
Type VDSS (@Tjmax) RDS(on) max ID
STB15NM60ND
STF15NM60ND
STI15NM60ND
STP15NM60ND
STW15NM60ND
650 V 0.299 Ω
14 A
14 A
14 A(1)
14 A
14 A
1. Limited only by maximum temperature allowed
TO-220 TO-220FP
I²PAK
123
12
3
123
TO-247
D2PAK
1
3
123
Table 1. Device summary
Order codes Marking Package Packaging
STB15NM60ND 15NM60ND D2PAK Tape and reel
STF15NM60ND 15NM60ND TO-220FP Tube
STI15NM60ND 15NM60ND I2PA K Tu b e
STP15NM60ND 15NM60ND TO-220 Tube
STW15NM60ND 15NM60ND TO-247 Tube
STB15NM60ND - STF/I15NM60ND
STP15NM60ND - STW15NM60ND
N-channel 600 V - 0.27 Ω - 14 A - FDmesh™ II Power MOSFET
D2PAK , I 2PAK, TO-220, TO-220FP, TO-247
www.st.com
Contents STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
2/19
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical ratings
3/19
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter
Value
Unit
DPAK/I²PAK
TO-220/IPAK TO-220FP
VDS Drain-source voltage (VGS=0) 600 V
VGS Gate-source voltage ± 25 V
IDDrain current (continuous) at TC = 25 °C 14 14 (1)
1. Limited only by maximum temperature allowed
A
IDDrain current (continuous) at TC = 100 °C 99(1) A
IDM (2)
2. Pulse width limited by safe operating area
Drain current (pulsed) 56 56(1) A
PTOT Total dissipation at TC = 25 °C 125 30 W
dv/dt (3)
3. ISD ≤ 14 A, di/dt ≤ 400 A/µs, VDD = 80% V(BR)DSS
Peak diode recovery voltage slope 40 V/ns
VISO
Insulation withstand voltage (RMS) from all three
leads to external heat sink
(t=1 s;TC=25 °C)
-- 2500 V
Tstg Storage temperature -55 to 150 °C
TjOperating junction temperature 150 °C
Table 3. Thermal data
Symbol Parameter TO-220 I²PAK TO-247 D²PAK TO-220FP Unit
Rthj-case Thermal resistance
junction-case max 1 4.2 °C/W
Rthj-amb Thermal resistance
junction-amb max 62.5 50 -- 62.5 °C/W
Rthj-pcb Thermal resistance
junction-pcb max -- -- -- 30 -- °C/W
Tl
Maximum lead
temperature for soldering
purposes
300 °C
Electrical ratings STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
4/19
Table 4. Avalanche characteristics
Symbol Parameter Max value Unit
IAS Avalanche current, repetitive or not-repetitive (pulse
width limited by Tj max) 6A
EAS
Single pulse avalanche energy
(starting Tj = 25 °C, ID = IAS, VDD = 50 V) 300 mJ
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical characteristics
5/19
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 5. On/off states
Symbol Parameter Test conditions Min. Typ. Max. Unit
V(BR)DSS Drain-source breakdown
voltage ID = 1 mA, VGS= 0 600 V
dv/dt(1)
1. Value measured at turn off under inductive load
Drain-source voltage slope VDD = 480 V,ID = 14 A,
VGS = 10 V 30 V/ns
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = Max rating,
VDS = Max rating,@125 °C
1
100
µA
µA
IGSS
Gate body leakage current
(VDS = 0) VGS = ±20 V 100 nA
VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 345V
RDS(on) Static drain-source on
resistance VGS= 10 V, ID= 7 A 0.27 0.299 Ω
Table 6. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
gfs(1)
1. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Forward transconductance VDS =15 V, ID= 7 A 10 S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS = 50 V, f =1 MHz,
VGS = 0
1250
65
5
pF
pF
pF
Coss eq.(2)
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDSS
Equivalent output
capacitance VGS = 0, VDS = 0V to 480 V 180 pF
Rg Gate input resistance
f=1 MHz Gate DC Bias=0
Test signal level=20 mV
open drain
4Ω
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 480 V, ID = 14 A
VGS = 10 V
(see Figure 19)
40
8
22
nC
nC
nC
Electrical characteristics STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
6/19
Table 7. Switching times
Symbol Parameter Test conditions Min Typ Max Unit
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD = 300 V, ID = 7 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 18)
17
20
47
28
ns
ns
ns
ns
Table 8. Source drain diode
Symbol Parameter Test conditions Min Typ Max Unit
ISD
ISDM (1)
1. Pulse width limited by safe operating area
Source-drain current
Source-drain current (pulsed)
14
56
A
A
VSD(2)
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
Forward on voltage ISD = 14 A, VGS=0 1.3 V
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD =14 A, di/dt =100 A/µs,
VDD = 100 V
(see Figure 20)
148
910
12
ns
nC
A
trr
Qrr
IRRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
VDD = 100 V
di/dt =100 A/µs, ISD = 14 A
Tj = 150 °C (see Figure 20)
190
1280
13
ns
nC
A
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical characteristics
7/19
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area for TO-220 /
D²PAK / I²PAK
Figure 3. Thermal impedance for TO-220 /
D²PAK / I²PAK
Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP
Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247
Electrical characteristics STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
8/19
Figure 8. Output characteristics Figure 9. Transfer characteristics
Figure 10. Transconductance Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
1
10
100
1000
C(pF)
0.1 1 10 100 VDS(V)
f= 1 MHz
f= 1 MHz
V
GS
GS
= 0
= 0
HV42710
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical characteristics
9/19
Figure 14. Normalized gate threshold voltage
vs temperature
Figure 15. Normalized on resistance vs
temperature
Figure 16. Source-drain diode forward
characteristics
Figure 17. Normalized BVDSS vs temperature
Test circuit STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
10/19
3 Test circuit
Figure 18. Switching times test circuit for
resistive load
Figure 19. Gate charge test circuit
Figure 20. Test circuit for inductive load
switching and diode recovery times
Figure 21. Unclamped Inductive load test
circuit
Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Package mechanical data
11/19
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
12/19
TO-220 mechanical data
Dim mm inch
Min Typ Max Min Typ Max
A 4.40 4.60 0.1730.181
b0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c0.480.70 0.0190.027
D 15.25 15.75 0.6 0.62
D1 1.27 0.050
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F1.231.32 0.0480.051
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L1314 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L3028.90 1.137
∅P3.75 3.85 0.147 0.151
Q2.65 2.95 0.104 0.116
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Package mechanical data
13/19
L2
A
B
D
E
H
G
L6
F
L3
G1
123
F2
F1
L7
L4
L5
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.4 4.6 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.7 0.017 0.027
F 0.75 1 0.030 0.039
F1 1.15 1.7 0.045 0.067
F2 1.15 1.7 0.045 0.067
G 4.95 5.2 0.195 0.204
G1 2.4 2.7 0.094 0.106
H 10 10.4 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 .0385 0.417
L5 2.9 3.6 0.114 0.141
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366
Ø 3 3.2 0.118 0.126
TO-220FP MECHANICAL DATA
Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
14/19
DIM.
mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
A1 2.40 2.72 0.094 0.107
b 0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c 0.49 0.70 0.019 0.027
c2 1.23 1.32 0.048 0.052
D 8.95 9.35 0.352 0.368
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
E 10 10.40 0.393 0.410
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L2 1.27 1.40 0.050 0.055
TO-262 (I2PAK) MECHANICAL DATA
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Package mechanical data
15/19
Dim. mm.
Min. Typ Max.
A4.855.15
A1 2.20 2.60
b1.0 1.40
b1 2.0 2.40
b23.0 3.40
c0.40 0.80
D19.85 20.15
E 15.45 15.75
e5.45
L 14.20 14.80
L1 3.70 4.30
L2 18.50
øP 3.55 3.65
øR 4.50 5.50
S5.50
TO-247 Mechanical data
Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
16/19
D²PAK (TO-263) mechanical data
Dim mm inch
Min Typ Max Min Typ Max
A 4.40 4.60 0.1730.181
A1 0.030.230.001 0.009
b0.70 0.93 0.027 0.037
b2 1.14 1.70 0.045 0.067
c 0.45 0.60 0.017 0.024
c2 1.231.360.0480.053
D8.959.350.352 0.368
D1 7.50 0.295
E 10 10.40 0.3940.409
E1 8.50 0.334
e 2.54 0.1
e1 4.88 5.280.1920.208
H15 15.850.5900.624
J1 2.492.690.099 0.106
L2.292.790.090 0.110
L1 1.27 1.40 0.05 0.055
L2 1.30 1.75 0.051 0.069
R 0.4 0.016
V2 0° 8°0° 8°
0079457_M
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Packaging mechanical data
17/19
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
D2PAK FOOTPRINT
* on sales type
DIM. mm inch
MIN. MAX. MIN. MAX.
A 330 12.992
B1.5 0.059
C 12.8 13.2 0.504 0.520
D20.2 0795
G 24.4 26.4 0.960 1.039
N100 3.937
T 30.4 1.197
BASE QTY BULK QTY
1000 1000
REEL MECHANICAL DATA
DIM. mm inch
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.413 0.421
B0 15.7 15.9 0.618 0.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E 1.65 1.85 0.065 0.073
F11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T 0.25 0.35 0.0098 0.0137
W23.7 24.3 0.933 0.956
TAPE MECHANICAL DATA
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
19/19
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
