STB15NM60ND - STF/I15NM60ND STP15NM60ND - STW15NM60ND N-channel 600 V - 0.27 - 14 A - FDmeshTM II Power MOSFET D2PAK, I2PAK, TO-220, TO-220FP, TO-247 Features Type VDSS (@Tjmax) RDS(on) max STB15NM60ND STF15NM60ND STI15NM60ND STP15NM60ND STW15NM60ND 650 V 0.299 ID 3 14 A 14 A 14 A(1) 14 A 14 A 3 12 1 D2PAK IPAK 2 3 1 TO-247 1. Limited only by maximum temperature allowed The worldwide best RDS(on)* area amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities 3 1 TO-220 Figure 1. 3 2 1 2 TO-220FP Internal schematic diagram Application Switching applications Description The FDmeshTM II series belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode.Strongly recommended for bridge topologies, in ZVS phase-shift converters. Table 1. Device summary Order codes Marking Package Packaging STB15NM60ND 15NM60ND D2PAK Tape and reel STF15NM60ND 15NM60ND TO-220FP Tube STI15NM60ND 15NM60ND I2PAK Tube STP15NM60ND 15NM60ND TO-220 Tube STW15NM60ND 15NM60ND TO-247 Tube April 2008 Rev 2 1/19 www.st.com 19 Contents STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/19 ................................................ 7 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter DPAK/IPAK TO-220FP TO-220/IPAK Unit VDS Drain-source voltage (VGS=0) 600 V VGS Gate-source voltage 25 V ID Drain current (continuous) at TC = 25 C 14 14 (1) A ID Drain current (continuous) at TC = 100 C 9 9(1) A IDM (2) Drain current (pulsed) 56 56(1) A PTOT Total dissipation at TC = 25 C 125 30 W dv/dt (3) Peak diode recovery voltage slope 40 VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) Tstg Storage temperature Tj -- V/ns 2500 V -55 to 150 C 150 C Operating junction temperature 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 14 A, di/dt 400 A/s, VDD = 80% V(BR)DSS Table 3. Symbol Thermal data Parameter Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-amb max Rthj-pcb Thermal resistance junction-pcb max Tl Maximum lead temperature for soldering purposes TO-220 IPAK TO-247 DPAK TO-220FP 1 62.5 -- -- Unit 4.2 C/W 50 -- 62.5 C/W -- 30 -- C/W 300 C 3/19 Electrical ratings Table 4. Symbol 4/19 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Avalanche characteristics Parameter IAS Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) EAS Single pulse avalanche energy (starting Tj = 25 C, ID = IAS, VDD = 50 V) Max value Unit 6 A 300 mJ STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND 2 Electrical characteristics Electrical characteristics (TCASE=25C unless otherwise specified) Table 5. Symbol V(BR)DSS dv/dt(1) On/off states Parameter Drain-source breakdown voltage Drain-source voltage slope Test conditions ID = 1 mA, VGS= 0 Min. Typ. Max. 600 VDD = 480 V,ID = 14 A, V 30 VGS = 10 V Unit VDS = Max rating, V/ns VDS = Max rating,@125 C 1 100 A A Gate body leakage current (VDS = 0) VGS = 20 V 100 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A 4 5 V RDS(on) Static drain-source on resistance VGS= 10 V, ID= 7 A 0.27 0.299 Typ. Max. Unit IDSS Zero gate voltage drain current (VGS = 0) IGSS 3 1. Value measured at turn off under inductive load Table 6. Symbol Parameter gfs(1) Forward transconductance Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS =15 V, ID= 7 A VDS = 50 V, f =1 MHz, VGS = 0 Equivalent output capacitance VGS = 0, VDS = 0V to 480 V Rg Gate input resistance f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge Coss eq.(2) 1. Dynamic VDD = 480 V, ID = 14 A VGS = 10 V (see Figure 19) Min. 10 S 1250 65 5 pF pF pF 180 pF 4 40 8 22 nC nC nC Pulsed: pulse duration = 300 s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 5/19 Electrical characteristics STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Table 7. Switching times Symbol Parameter td(on) tr td(off) tf Table 8. Symbol Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Max 17 20 47 28 VDD = 300 V, ID = 7 A, RG = 4.7 , VGS = 10 V (see Figure 18) Unit ns ns ns ns Source drain diode Parameter Test conditions Min Typ Max Unit 14 56 A A 1.3 V Source-drain current Source-drain current (pulsed) VSD(2) Forward on voltage ISD = 14 A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD =14 A, di/dt =100 A/s, VDD = 100 V (see Figure 20) 148 910 12 ns nC A Reverse recovery time Reverse recovery charge Reverse recovery current VDD = 100 V di/dt =100 A/s, ISD = 14 A Tj = 150 C (see Figure 20) 190 1280 13 ns nC A IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 6/19 Typ ISD ISDM (1) trr Qrr 2. Min Pulsed: pulse duration = 300 s, duty cycle 1.5% STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220 / DPAK / IPAK Figure 3. Thermal impedance for TO-220 / DPAK / IPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247 7/19 Electrical characteristics Figure 8. STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Output characteristics Figure 10. Transconductance Figure 9. Transfer characteristics Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations HV42710 C(pF) 1000 f= 1 MHz VGS = 0 100 10 1 0.1 8/19 1 10 100 VDS(V) STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Electrical characteristics Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics Figure 17. Normalized BVDSS vs temperature 9/19 Test circuit 3 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Test circuit Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform 10/19 Figure 23. Switching time waveform STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/19 Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 12/19 Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Package mechanical data TO-220FP MECHANICAL DATA mm. DIM. MIN. inch TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 L5 1 2 3 L4 13/19 Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 14/19 TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 Typ Max. 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 L1 3.70 L2 14.80 4.30 18.50 oP 3.55 3.65 oR 4.50 5.50 S 5.50 15/19 Package mechanical data STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND DPAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8 0 0.4 0 0079457_M 16/19 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 17/19 Revision history 6 STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Revision history Table 9. 18/19 Document revision history Date Revision Changes 06-Mar-2008 1 First release 24-Apr-2008 2 VGS value on Table 2 changed. STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19