ATC RF /Microwave Capacifors: Military Products . Ob American Technical Ceramics D O&8F MB O773409 O001L12e3 75),N-o5- 05-07 ATC is a QPL Approved Supplier for MIL-C-55681/4 and /5 Products Listed Below This manual covers the general requirements for established reliability fixed, multilayer, unencapsulated, monolithic porcelain and ceramic dielectric capacitors. These capacitors are intended for use in RF solid state circuitry up to and including 25 gigahertz and cannot be replaced in the field. The porcelain dielectric (Characteristic BG) has a temperature coefficient of +90 +20 PPM/C over the temperature range of -55C to +125C. The ceramic dielectric (Characteristic BP) has a temperature coefficient of 0 +30 PPM/C over the temperature range of -55C to +125C. The minimum, self-resonant frequencies of the capacitors are specified. For example, a 1 pF size B is specified as 6 GHz. minimum. } ATC PART NUMBER CODE: COR 12 B G 101 4 F WwW DESIGNATION: Identifies established reliability, ceramic dielectric, fixed, chip capacitors. STYLE: Identifies dimensions of the capacitor and lead type, where applicable. RATED TEMP: -55C to +125C VOLTAGE TEMP. (T.C.) LIMITS: G = +90 +20 PPM/C; P = 0 +30 PPM/C CAPACITANCE CODE: The first two digits represent significant figures and the last digit specifies the number of zeros to follow. When fractional values of pF are required, the letter R shall be used to indicate the decimal point. FAILURE RATE LEVEL (Established at 90% confidence): M-- 1% per 1000 hours P-- 0.1% per 1000 hours R - - 0.01% per 1000 hours -- 0.001% per 1000 hours TERMINATION FINISH: M - Palladium Silver (CDR11, CDR13) N - Gold over Nickel over Silver (CDR11, CDR13) S - Solder Coated, Final (CDR12, CDR14, CDR23, CDR25) T - Silver (CDR21, CDR22, CDR24) U - Solder Coated, Nickel Barrier (CDR12, CDR14) N and U - Terminations preferred for best solder- ability, thermocompression bonding, leach and mig- ration resistance, and shelf life for chips and pellets. W - Solder plated, nickel barrier (CDR12, CDR14) RATED DC VOLTAGE @ 125C: A--50 VDC, B - - 100 VDC, C- - 200 VDC, D - - 300 VDC, E - - 500 VDC, K - - 150 VDC CAPACITANCE TOLERANCE: B (+0.1 pF), C (0.25 pF), D (40.5 pF), F (+1%), G (42%), J (45%), K (410%), M (+20%) TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE CAPACITANCE RATED TEMP. AND RATED DC RANGE (pF) TOLERANCE VOLTAGE-TEMP. VOLTAGE AVAILABLE LIMITS CDR1-B-0R1AB-- to CDR1-B-OR2AB-- 0.1 pF to 0.2 pF B Characteristic BG CDR1-B-OR3A--- to CDR1-B-OR4A--- 0.3 pF to 0.4 pF B,C (+90 +20 PPM/C) CDR1-B-0R5A--- to CDR1-B-2R2A---** 0.5 pF to 2.2 pF B,C, D and 150=K CDR1-B-2R4A--- to CDR1-B-6R2A---*** 2.4 pF to 6.2 pF B,C, D Characteristic BP 50=A CDR1-B-6R8A--- to CDR1-B-9R1A---** 6.8 pF to 9.1 pF B,C, J,K,M (0 #30 PPM/C) CDR1-B-100A--- to CDR1-B-101A---*** 10 pF to 100 pF E,G,J,K,M CDR1-BP111A--- to CDR1-BP102A-*** 110 pF to 1000 pF EG,J,K,M BP 50=A TABLE Il - STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE CAPACITANCE RATED TEMP. AND RATED DC RANGE (pF) TOLERANCE VOLTAGE-TEMP. VOLTAGE AVAILABLE LIMITS CDR1-B-OR1EB-- to CDR1-B-OR2EB-- 0.1 pF to 0.2 pF B CDR1-B-OR3E--- to CDR1-B-OR4E--- 0.3 pF to 0.4 pF B,C CDRI1-B--OR5E--- to CDR1-B-2R2E-** 0.5 pF to 2.2 pF B,C,D Characteristic BG 500=<E CDR1-B-2R4E--- to CDR1-B-6R2E---"* 2.4 pF to 6.2 pF B,C,D (490 #20 PPM/C) CDR1-B-6R8E--- to CDR1-B-9R1E--*** 6.8 pF to 9.1 pF B,C, J, KM and CDRI1-B-100E--- to CDR1-B-101E---*"* 10 pF to 100 pF Characteristic BP CDR1-B-111D--- to CDR1-B-201D--*** 110 pF to 200 pF (0 #30 PPM/C) 300 =D CDR1-B-221C--- to CDR1-B-471C---*** 220 pF to 470 pF EG.L.KM 200 = C CDR1-B-511B--- to CDR1-B-621B--*** 510 pF to 620 pF 100 = B CDR1-B-681A--- to CDR1-B-102A---** 680 pF to 1000 pF s0=A CDR1-BP112A--- to CDR1-BP512A---*** | __1100 pF to 5100 pF BP * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish, and failure rate level. ** Intermediate values in this category are in 0.1 pF steps. +e Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91. American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2142 e phone (516) 547-5700 fax (516) 547-5748 e-mail: ate@interserv cam D OSF @ O773409 O0011c4 L955ATC is a QPL Approved Supplier for MIL-C-55681/4 and /5 Products Listed Below TABLE Il - STYLES CDR21 TO CDR25 CAPACITOR CHARACTERISTICS TYPE DESIGNATION* CAPACITANCE CAPACITANCE RATED TEMP. AND RATED DC RANGE (pF) TOLERANCE VOLTAGE-TEMP. VOLTAGE AVAILABLE LIMITS CDR2-B-OR1EB-- to CDR2-B-OR2EB-- 0.1 pF to 0.2 pF B CDR2-B-OR3E--- to CDR2-B-0R4E--- 0.3 pF to 0.4 pF B,C CDR2-B--ORSE--- to CDR2-B-2R2E---** 0.5 pF to 2.2 pF B,C,D Characteristic BG 500 CDR2-B-2R4E--- to CDR2-B-6R2E---*** 2.4 pF to 6.2 pF B,C, D (+90 +20 PPM/C) CDR2-B-6R8E --- to CDR2-B-9RIE---*** 6.8 pF to 9.1 pF B, C, J, K,M and CDR21-B-100E--- to CDR2-B-101E---*** 10 pF to 100 pF Characteristic BP CDR2-B-111D--- to CDR2-B-201D---*** 110 pF to 200 pF (0 +30 PPM/C) 300 CDR2-B-221C--- to CDR2-B-471C--*** 220 pF to 470 pF EGJKM 200 CDR2-B-511B--- to CDR2-B-621B---*** 910 pF to 620 pF cure 100 CDR2-B-681A--- to CDR2-B-102A---*** 680 pF to 1000 pF 50 CDR2-BP112A--- to CDR2-BP512A---*** 1100 pF to 5100 pF BP * Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance (where applicable), termination finish (T for styles CDR21, CDR22 and CDR24, and S for styles CDR23 and CDR25), and failure rate level. ** Intermediate values in this category are in 0.1 pF steps. ** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91. MECHANICAL CONFIGURATIONS BODY DIMENSIONS LEAD AND TERMINATION vine Sue TYPE OUTLINES DIMENSIONS LENGTH WIDTH THICKNESS AND MATERIALS t 055 +.015 020/.057 CDR 11 AW Chip TT 1 AA : ; M - Palladium Silver c nq = (1.4 0.38) (051/145) | Gold Over Nickel ate lela Tle Over Silver . 110 +.020 030/.102 et : cor | B&D , chip W/TISA (0.79 20.51) (0.76/25) | NisATCs UNI-TERM TERMINATION SURFACE 055 +.025 055 +.015 020/.057 CDR 12 AW Pellet Ah ALA yy fs S - Solder Coated, Final p ] = (1.4 40.63) (1.4 +0.38) (051/145) | ty Solder Coated, ee ee ee Nickel Barrier 110 +.035-.020] .110 +.020 030/.102 ee CDR | B&) Pellet W/TISA (2.79 +0.89-051)| (2.794051) | (0.76/259) | US ATC's BARRIER/CAP TERMINATION SURFACE t 055 +.015 020/.057 CDRiz | A Solder Plate _ W [] | | (1.4 0.38) (051/145) | ww Nickel Barrier, +| L | | T | 110 +.020 030/.102 Solder Plate. CDR14 | B &) Solder Plate W/TISA (2.79 0.51) (0.76 /2.59) w TERMINATION SURFACE TL B Microstrip | yo -lule 4 ollie LENGTH | wipTH | ie CDR 21 MS *OOn co Piatele tlre 093 004 B Axial | 4 tule yale 250 (6.35)| +005 | +.001 CDR 22 i, Ribbon | + 7, min. | (236 | (0.10 stele Atle +0.13) | +0.03) B Radial a ltl, 135 +.015 110 +.015 .060/.100 CDR 24 oa AR Ribbon Oo * c 7" | (3.432038) | (2.792038) | (152/254) (Termination T - sven B Radial a al tle CDR 23 AD Zz aw Wire ao Line 50 (12.7) #26 AWG oie 016 (375) B Axial alaley min. dia. nom. CDR 25 aw Wire Se tape (Termination $ - Solder Coated) ] All dimensions are in inches, except those in parentheses which are in millimeters. All leads and ribbon are silver and are attached with high temperature solder. American Technical Ceramics One Norden Lane, Huntington Station, N.Y. 11746-2142 Db EQUIV. ATC PART NO. EQUIV. ATC PART NO. STYLE | CHARACTERISTICS STYLE | CHARACTERISTICS BG BP BG BP CDR21 [100B--MS | 700B- MS CDR11 100A 700A CDR22 | 100B--AR | 700B- AR CDRI12 100A 700A CDR23 | 100B--RW | 700B-- RW CDR13 100B 700B CDR24 | 100B ------ RR 700B -- RR CDR14 100B 700B CDR25 | 100B------ AW | 700B ------ AW phone (516) 547-5700 fox (516) 547-5748 e-mail: atc@interserv.com O&F MH 0773409 0001125 sou a