SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9 Highlights .75kVA / 750VA / 600W line interactive 2U rack/tower UPS, Sine wave output MODEL NUMBER: SMART750RMXL2U 120V output, Corrects brownouts and overvoltages from 83V to 147V 0.8 Power Factor, Interactive LCD interface Extended runtime options up to 450W 4 post compatible mounting accessories 95% line-mode efficiency, 2 switched load banks USB, RS232, EPO and slot for Network Management Card Description options Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible NEMA 5-15R outlets Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs 120V NEMA 5-15P input, 6 Package Includes SMART750RMXL2U UPS System within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% linemode efficiency offers reduced heat emissions and operating costs. Network management interfaces USB, Serial & EPO cabling support communications via USB, RS-232 and slot for optional Network Management Card options. HID- 4 post installation kit compliant USB interface enables integration with built-in power management and auto shutdown features Owner's manual of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silentmode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules. Features Tripp Lite SMART750RMXL2U line interactive 2U rack/tower UPS with 750VA / .75kVA / 600W capacity and extended runtime options Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 147V NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switched output load 1/6 banks Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions Internal batteries offer 20.7 minutes at 50% load (300W) and 8.5 minutes at 100% load (600W) Extended runtime is available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) and BP24V36-2US (multi-pack compatible); Output is reduced to 450 watts maximum with external battery packs External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment Intelligent battery management system extends battery life Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information LCD interface also supports a number of advanced user setup and operating preferences Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement Built-in USB, RS-232 and slot for optional Network Management Card options Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert Built-in Emergency Power Off (EPO) interface with cable Specifications OUTPUT Output Volt Amp Capacity (VA) 750 Output Watt Capacity (Watts) 600 Output Capacity Details Output is reduced to 450 watts when used with external battery packs Power Factor 0.8 Nominal Output Voltage(s) Supported 110V; 115V; 120V Nominal Voltage Details 120v nominal output in battery mode 2/6 Frequency Compatibility 60 Hz Output Voltage Regulation (Line Mode) -21%, +8% Output Voltage Regulation (Battery Mode) +/- 5% Output Receptacles (6) 5-15R Load Management Receptacles Two switchable two-outlet 5-15R load banks Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) Pure Sine wave INPUT Rated input current (Maximum Load) 7.5A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P Input Circuit Breakers 10A UPS Input Cord Length (ft.) 10 UPS Input Cord Length (m) 3.0 Recommended Electrical Service 15A 120V Input Phase Single-Phase BATTERY Full Load Runtime (min.) 8.5 min. (600w) Half Load Runtime (min.) 20.7 min. (300w) Expandable Battery Runtime Extended runtime supported via optional external battery packs External Battery Pack Compatibility BP24V15RT2U (limit 1); BP24V28-2U (limit 1); BP24V70-3U (multi-pack compatible); BP24V36-2US (multi-pack compatible) DC System Voltage (VDC) 24 Battery Recharge Rate (Included Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge) Internal UPS Replacement Battery Cartridge See Tripp Lite UPS Replacement battery selector Battery Access Front panel battery access door Battery Replacement Description Hot-swappable, user replaceable batteries Expandable Runtime Yes VOLTAGE REGULATION Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 3/6 Overvoltage Correction Input voltages between 128 and 147 are reduced by 12% Undervoltage Correction Input voltages between 83 and 107 are boosted by 14% USER INTERFACE, ALERTS & CONTROLS Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions LED Indicators Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) SURGE / NOISE SUPPRESSION UPS AC Suppression Joule Rating 570 joules EMI / RFI AC Noise Suppression Yes PHYSICAL Included Mounting Accessory Description 4 post rackmount installation accessories included Installation Form Factors Supported with Optional Accessories 2 post rackmount (2POSTRMKITWM); 2-4 post front rail rackmount (UPSHDEARKIT); Tower (2-9USTAND); Wallmount (2POSTRMKITWM) Primary Form Factor Rackmount UPS Power Module Dimensions (hwd, in.) 3.45 x 17.35 x 13.15 UPS Power Module Dimensions (hwd, cm) 8.76 x 44.07 x 33.40 Rack Height (U Spaces) 2 Minimum Required Rack Depth (inches) 16.2 Minimum Required Rack Depth (cm) 41.15 UPS Power Module Weight (lbs.) 35.4 UPS Power Module Weight (kg) 16.06 UPS Shipping Dimensions (hwd / in.) 7.9 x 22.85 x 19.3 UPS Shipping Dimensions (hwd / cm) 20.07 x 58.04 x 49.02 Shipping Weight (lbs.) 46.4 Shipping Weight (kg) 21.1 Cooling Method Fan UPS Housing Material Steel 4/6 Minimum Required Rack Depth (mm) 411 Primary UPS Height (mm) 88 Primary UPS Width (mm) 441 Primary UPS Depth (mm) 334 Shipping Height (mm) 201 Shipping Width (mm) 580 Shipping Depth (mm) 490 ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC Mode BTU / Hr. (Full Load) 109 Battery Mode BTU / Hr. (Full Load) 420 AC Mode Efficiency Rating (100% Load) 95% COMMUNICATIONS Communications Interface USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface Network Management Cards SNMPWEBCARD; TLNETCARD; WEBCARDLX; RELAYIOCARD Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions PowerAlert Software For local monitoring via the UPS's built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert Communications Cable USB and DB9 cabling included WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer Time 4 milliseconds (AC to battery mode), 2 milliseconds (Battery to AC mode) Low Voltage Transfer to Battery Power (Setpoint) 83 High Voltage Transfer to Battery Power (Setpoint) 147 SPECIAL FEATURES Grounding Lug Back panel grounding lug Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported High Availability UPS Features Hot swappable batteries 5/6 CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) WARRANTY Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty. Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance (c) 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies 6/6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Tripp Lite: SMART-700RM SMART750RMXL2U