VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com Vishay Semiconductors Fast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A FEATURES * Short reverse recovery time * Low stored charge * Wide current range * Excellent surge capabilities * Standard JEDEC(R) types * Stud cathode and stud anode versions * Fully characterized reverse recovery conditions * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DO-203AA (DO-4) TYPICAL APPLICATIONS * DC power supplies PRODUCT SUMMARY * Inverters IF(AV) 6 A, 12 A, 16 A * Converters Package DO-203AA (DO-4) * Choppers Circuit configuration Single diode * Ultrasonic systems * Freewheeling diodes MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) TC IF(RMS) IFSM I2t 16FL.. 12 16 A 100 100 100 C 9.5 19 25 A 50 Hz 110 145 180 115 150 190 UNITS A 50 Hz 60 103 160 60 Hz 55 94 150 1452 1452 2290 I2s Range 50 to 1000 50 to 1000 50 to 1000 V See Recovery Characteristics table See Recovery Characteristics table See Recovery Characteristics table ns -65 to 150 -65 to 150 -65 to 150 C trr TJ 12FL.. 6 60 Hz I2t VRRM 6FL.. Range A2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-6FL.., VS-12FL.., VS-16FL.. VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 5 50 75 10 100 150 20 200 275 40 400 500 60 600 725 80 800 950 100 1000 1250 IRRM MAXIMUM AT TJ = 25 C A IRRM MAXIMUM AT TJ = 100 C mA IRRM MAXIMUM AT TJ = 150 C mA 50 - 6.0 Revision: 21-Jan-14 Document Number: 93138 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature IF(AV) TEST CONDITIONS 180 conduction, half sine wave DC 6FL.. 12FL.. 16FL.. UNITS 6 12 (1) 16 A 100 100 100 C 9.5 19 25 215 IF(RMS) Maximum RMS current t = 10 ms Maximum peak, one-cycle non-repetitive forward current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms VFM Maximum forward voltage drop No voltage reapplied 100 % VRRM reapplied No voltage reapplied Sinusoidal half wave, initial TJ = 150 C 130 170 135 180 225 110 145 180 115 150 (1) 190 86 145 230 78 130 210 60 103 160 100 % VRRM reapplied A A2s 55 94 150 856 1452 2290 TJ = 25 C; IF = Rated IF(AV) (DC) 1.4 1.4 (1) 1.4 TC = 100 C; IFM = x rated IF(AV) 1.5 1.5 (1) 1.5 t = 0.1 ms to 10 ms, no voltage reapplied A2s V Note (1) JEDEC registered values RECOVERY CHARACTERISTICS PARAMETER SYMBOL Maximum reverse recovery time Maximum peak recovery current Maximum reverse recovery charge trr IRM(REC) Qrr TEST CONDITIONS TJ = 25 C, IF = 1 A to VR = 30 V, dIF/dt = 100 A/s TJ = 25 C, dIF/dt = 25 A/s, IFM = x rated IF(AV) 6FL.., 12FL.., 16FL.. S02 S05 - - UNITS IFM ns 200 IFM = x rated IF(AV) trr 500 - TJ = 25 C, IF = 1 A to VR = 30 V, dIF/dt = 100 A/s - - TJ = 25 C, dIF/dt = 25 A/s, IFM = x rated IF(AV) - - t dir dt - Qrr IRM(REC) nC Note (1) JEDEC registered values THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range SYMBOL TEST CONDITIONS 12FL.. 16FL.. TJ - 65 to 150 TStg - 65 to 175 Maximum thermal resistance, junction to case RthJC DC operation Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 2.5 2.0 1.5 + 0 - 10 % (13) Lubricated threads 1.2 + 0 - 10 % (10) Approximate weight JEDEC UNITS C 1.6 0.5 Not lubricated threads Allowable mounting torque Case style 6FL.. C/W N*m (lbf * in) 7 g 0.25 oz. DO-203AA (DO-4) Revision: 21-Jan-14 Document Number: 93138 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com Vishay Semiconductors RthJC CONDUCTION 6FL.. CONDUCTION ANGLE 12FL.. 16FL.. SINUSOIDAL CONDUCTION 6FL.. 12FL.. 16FL.. RECTANGULAR CONDUCTION 180 0.58 0.46 0.37 0.33 0.26 0.21 120 0.60 0.48 0.39 0.58 0.46 0.37 60 1.28 1.02 0.82 1.28 1.02 0.82 30 2.20 1.76 1.41 2.20 1.76 1.41 TEST CONDITIONS UNITS TJ = 150 C K/W 160 160 150 150 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC 140 DC 130 120 110 100 180 C 90 180 C 120 C 60 C 80 140 DC 130 180 C 120 110 100 180 C 120 C 60 C 90 80 70 70 60 60 0 1 2 3 4 5 6 7 8 9 0 10 5 10 15 20 25 30 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Average Forward Current vs. Maximum Allowable Case Temperature, 6FL Series Fig. 3 - Average Forward Current vs. Maximum Allowable Case Temperature, 16FL Series 160 IF Maximum Allowable Case Temperature (C) 150 dIF dt 140 130 IFM I DC 120 trr t 110 %IRM(REC) 100 180 C 90 180 C 120 C 60 C 80 IRM(REC) 70 60 0 2 4 6 8 10 12 14 16 18 20 Average Forward Current (A) Fig. 2 - Average Forward Current vs. Maximum Allowable Case Temperature, 12FL Series Qrr IF, IFM - Peak forward current prior to commutation -dIF/dt - Rate of fall of forward current IRM(REC) - Peak reverse recovery current trr - Reverse recovery time Qrr - Reverse recovered charge Fig. 4 - Reverse Recovery Time Test Waveform Revision: 21-Jan-14 Document Number: 93138 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com 6 R - K/W O = 180 120 60 30 7 Conduction angle - O 8 R 180 0.58 30 - R 120 0.60 60 1.28 30 2.20 thS - R 15 A =1 0- - R 20 - 5 8 R 12 6 - 7- - R R R R R - 6FL... TJ = 150 C 9 5 Maximum Average Forward Power Loss (W) 10 Vishay Semiconductors K/ W RMS limit 4 3 2 No heatsi nk O Conduction angle 1 0 0 1 2 3 4 5 6 10 20 Average Forward Current (A) 30 40 50 60 70 80 90 100 Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (Sinusoidal Waveforms), 6FL Series 8 12 - R 15 R 20 R DC 0 180 0.33 30 - R 120 0.58 60 1.28 30 2.20 thS A =8 10 O = 180 120 60 30 DC 6 RMS limit 4 2 O - 4R R R - K/W 10 5 Conduction angle - O 12 6- R R - RK /W - R R - 6FL... TJ = 150 C 3 Maximum Average Forward Power Loss (W) 14 No heatsink Conduction angle 0 0 1 3 2 4 5 6 7 8 9 10 10 20 Average Forward Current (A) 30 40 50 60 70 90 100 80 Maximum Allowable Ambient Temperature (C) 6- O = 180 120 60 30 14 12 10 R 10 - R RMS limit 8 2 3 thS A R 8- 12 - R R =4 - R - R K/ W - R 4 0.46 120 0.48 60 1.02 30 1.76 30 - R O Conduction angle 2 180 R 15 - R 20 - R 6 R - K/W 16 5- R - 12FL... TJ = 150 C 18 1 Maximum Average Forward Power Loss (W) 20 Conduction angle - O Fig. 6 - Current Rating Nomogram (Rectangular Waveforms), 6FL Series No heatsink 0 0 1 2 3 4 5 6 7 8 9 10 11 12 Average Forward Current (A) 10 20 30 40 50 60 70 80 90 100 Maximum Allowable Ambient Temperature (C) Fig. 7 - Current Rating Nomogram (Sinusoidal Waveforms), 12FL Series Revision: 21-Jan-14 Document Number: 93138 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com thS A 25 3- O = 180 120 60 30 20 15 5- DC 10 5 R 4- R 8- R 10 - R 15 - R 20 - R RMS limit =2 1. 0 - R 0. - R 5 K/ W - R R 6- R R - K/W R 12FL... TJ = 150 C Conduction angle - O Maximum Average Forward Power Loss (W) 30 Vishay Semiconductors DC 0 180 0.26 120 0.46 60 1.02 30 1.76 O Conduction angle No heatsink 0 0 2 4 6 8 10 12 14 16 18 20 10 20 Average Forward Current (A) 30 40 50 60 70 90 100 80 Maximum Allowable Ambient Temperature (C) 4- 15 R 6R 10 RMS limit 10 A R 5- O = 180 120 60 30 thS =3 1. - 5 - R R - R K/ W 8- R R 15 - R 5 20 - R O Conduction angle R - K/W 20 2 R R - 16FL... TJ = 150 C 1 Maximum Average Forward Power Loss (W) 25 Conduction angle - O Fig. 8 - Current Rating Nomogram (Rectangular Waveforms), 12FL Series 180 0.37 120 0.39 60 0.82 30 1.41 0 0 2 4 6 8 10 12 14 16 10 20 Average Forward Current (A) 30 40 50 60 70 80 90 100 Maximum Allowable Ambient Temperature (C) 1.5 16FL... TJ = 150 C 30 R O = 180 120 60 30 25 20 thS A =3 4- RMS limit 15 2- 5- R 8- R DC - R 1. 0 R 0. 5 - R - R - RK 5 6- R 15 - R O DC 0 180 0.21 120 0.37 60 0.82 30 1.41 /W R 10 - R 10 R - K/W Maximum Average Forward Power Loss (W) 35 Conduction angle - O Fig. 9 - Current Rating Nomogram (Sinusoidal Waveforms), 16FL Series Conduction angle 0 0 5 10 15 20 Average Forward Current (A) 25 10 20 30 40 50 60 70 80 90 100 Maximum Allowable Ambient Temperature (C) Fig. 10 - Current Rating Nomogram (Rectangular Waveforms), 16FL Series Revision: 21-Jan-14 Document Number: 93138 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series Vishay Semiconductors 103 103 102 10 TJ = 150 C TJ = 25 C 102 O O = DC 180 120 60 30 O 10 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1 102 10 103 Instantaneous Forward Voltage (V) Average Forward Current (A) Fig. 11 - Maximum Forward Voltage vs. Forward Current, 6FL Series Fig. 14 - Maximum High Level Forward Power Loss vs. Average Forward Current, 12FL Series Instantaneous Forward Current (A) 103 6FL... O = 180 120 60 30 102 O O = DC 180 120 60 30 O 10 TJ = 150 C 1 1 102 10 103 16FL.. 102 TJ = 150 C 10 TJ = 25 C 1 103 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 12 - Maximum High Level Forward Power Loss vs. Average Forward Current, 6FL Series Fig. 15 - Maximum Forward Voltage vs. Forward Current, 16FL Series 103 103 16FL... 12FL.. Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) O = 180 120 60 30 TJ = 150 C 1 0 Instantaneous Forward Current (A) 12FL... 6FL... Maximum Average Forward Power Loss (W) Instantaneous Forward Current (A) www.vishay.com 102 10 TJ = 150 C TJ = 25 C O = 180 120 60 30 102 O = DC 180 120 60 30 O 10 O TJ = 150 C 1 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1 10 10 2 103 Instantaneous Forward Voltage (V) Average Forward Current (A) Fig. 13 - Maximum Forward Voltage vs. Forward Current, 12FL Series Fig. 16 - Maximum High Level Forward Power Loss vs. Average Forward Current, 16FL Series Revision: 21-Jan-14 Document Number: 93138 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com 105 TJ = 150 C 600 500 400 300 200 TJ = 25 C 6FL... 100 12FL... 60 50 40 30 16FL... IF = 1 A 6FL...S02 12FL...S02 16FL...S02 20 6FL...S05 12FL...S05 16FL...S05 IF = x rated IF(AV) Recovered Charge (nC) Reverse Recovery Time (ns) Vishay Semiconductors 104 TJ = 150 C IF = x rated IF(AV) 103 16FL... 12FL... 6FL... 102 IF = 1 A TJ = 25 C 10 10 1 3 10 30 1 100 3 10 30 100 Rate of Fall of Forward Current (A/s) Rate of Fall of Forward Current (A/s) Fig.17a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S02 Fig. 18b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S05 6FL...S02 12FL...S02 16FL...S02 103 TJ = 150 C IF = x rated IF(AV) 102 16FL... 12FL... 6FL... IF = 1 A 10 TJ = 25 C Reverse Recovery Time (ns) Recovered Charge (nC) 104 TJ = 150 C 6000 5000 4000 3000 2000 1000 TJ = 25 C 600 500 400 300 6FL... 12FL... 16FL... 6FL...S10 12FL...S10 16FL...S10 200 IF = 1 A 100 1 1 3 10 30 1 100 Fig. 17b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S02 Recovered Charge (nC) IF = x rated IF(AV) TJ = 25 C 6FL... 200 12FL... 16FL... IF = x rated IF(AV) 104 103 12FL... 6FL... 10 30 100 10 1 Rate of Fall of Forward Current (A/s) Fig. 18a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S05 IF = 1 A 6FL...S10 12FL...S10 16FL...S10 100 3 16FL... TJ = 25 C 102 IF = 1 A 1 100 TJ = 150 C 1000 600 500 400 300 30 105 TJ = 150 C 2000 10 Fig. 19a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S10 6FL...S05 12FL...S05 16FL...S05 3000 3 Rate of Fall of Forward Current (A/s) Rate of Fall of Forward Current (A/s) Reverse Recovery Time (ns) IF = x rated IF(AV) 3 10 30 100 Rate of Fall of Forward Current (A/s) Fig. 19b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S10 Revision: 21-Jan-14 Document Number: 93138 7 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com Vishay Semiconductors 200 140 At any rated load condition and with rated VRRM applied following surge. 100 80 60 60 Hz 40 50 Hz At any rated load condition and with rated VRRM applied following surge. Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) 120 150 60 Hz 100 50 Hz 50 20 0 0 1 2 4 6 8 10 20 1 40 60 2 4 6 8 10 20 40 60 Number of Equal Amplitude Half Cycle Current Pulses (N) Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 20 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 6FL Series Fig. 22 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 16FL Series Peak Half Sine Wave Forward Current (A) 150 100 60 Hz 50 Hz 50 0 1 2 4 6 8 10 20 40 60 Transient Thermal Impedance Junction to Case (C/W) 10 At any rated load condition and with rated VRRM applied following surge. 6FL... 16FL... 1 12FL... 10-1 10-3 10-2 10-1 1 10 Number of Equal Amplitude Half Cycle Current Pulses (N) Square Wave Pulse Duration (s) Fig. 21 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 12FL Series Fig. 23 - Maximum Transient Thermal Impedance, Junction to Case vs. Pulse Duration, All Series Revision: 21-Jan-14 Document Number: 93138 8 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-6FL(R), VS-12FL(R), VS-16FL(R) Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 16 F L R 60 M S02 1 2 3 4 5 6 7 8 1 - Vishay Semiconductors product 2 - Current code I(AVG) = Exact current rating 3 - F = Diode 4 - Omit = Standard recovery diode L = Only for fast diode 5 - Omit = Stud forward polarity R = Stud reverse polarity 6 - Voltage code x 10 = VRRM (see Voltage Ratings table) 7 - Outlines: Omit = Stud base UNF thread M = Stud base metric thread 8 - trr code only for fast diode (see Recovery Characteristics table) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95311 Revision: 21-Jan-14 Document Number: 93138 9 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors DO-203AA (DO-4) DIMENSIONS in millimeters (inches) + 0.3 0 + 0.01 (0.08 0) 0.8 0.1 (0.03 0.004) 3.30 (0.13) 4.00 (0.16) 2 5.50 (0.22) MIN. R 0.40 R (0.02) O 1.80 0.20 (O 0.07 0.01) 20.30 (0.80) MAX. O 6.8 (0.27) 10.20 (0.40) MAX. 3.50 (0.14) 11.50 (0.45) 10.70 (0.42) 10/32" UNF-2A For metric devices: M5 x 0.8 11 (0.43) Document Number: 95311 Revision: 30-Jun-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-1N3879 VS-1N3892R VS-1N3889 VS-6FL60S02 VS-6FLR60S05 VS-6FL40S02 VS-6FLR20S02 VS6FLR80S05 VS-6FLR100S05 VS-6FLR60S02 VS-12FLR60S05 VS-12FL100S10 VS-12FL10S05 VS-16FL40S02 VS-12FLR10S02 VS-16FLR10S02 VS-12FL40S05 VS-12FLR20S02 VS-16FL40S05 VS-12FL100S05 VS12FL10S02 VS-12FL40S02 VS-12FL60S02 VS-12FLR100S05 VS-12FLR40S02 VS-12FLR60S02 VS-16FL100S05 VS-16FL60S02 VS-16FLR100S05 VS-16FLR20S05 VS-16FLR60S02 VS-1N3880 VS-1N3890R VS-1N3891 VS1N3891R VS-6FL100S05 VS-6FLR10S02 VS-6FLR40S02 VS-12FL20S02 VS-16FLR40S05 VS-16FLR80S05 VS16FLR60S05 VS-1N3883 VS-1N3882R VS-16FL100S10 VS-12FL60S05 VS-6FL80S05 VS-1N3882 VS16FL20S05 VS-16FLR40S02 VS-16FLR20S02 VS-1N3881R VS-1N3893 VS-1N3879R VS-1N3880R VS12FLR40S05 VS-12FLR80S05 VS-1N3892 VS-1N3881 VS-12FL20S05 VS-6FL20S02 VS-16FL10S02 VS16FL60S05 VS-1N3890 VS-1N3893R VS-6FL60S05 VS-16FL20S02 VS-12FL80S05