851 Series MIL-DTL-26482 Connectors 851 Series Sommaire / Contents * Sommaire / Contents............................................................... 3 * Etendue de la gamme / Product Overview...................... 3 * Presentation / Presentation.................................................... 4-5 * Description / Description........................................................ 6 * Tableau comparatif references SOURIAU et normes equivalentes / Cross reference list...................................... 7-8 * Caracteristiques techniques / Technical characteristics. 9 * Contacts / Contacts ................................................................ 10 * References / Ordering information...................................... 11-13 * Arrangements / Contact layouts.......................................... 14-15 * Positionnements / Orientations............................................. 16 * Encombrements Connecteurs Etanches / Dimensions Environmental Connectors..................................................... 17-38 * Encombrements Connecteurs Hermetiques / Dimensions Hermetic Connectors............................................................. 39-40 * Encombrements Connecteurs pour connexions enroulees et a picots droits / Dimensions Wire-wrap and PC tail Connectors....................................................................................... 40-41 * Percage cloison / Panel cut-out............................................ 41 * Accessoires / Accessories..................................................... * Bouchons / Caps....................................................................... * References des raccords / Backshell ordering information................................................................................... * Outillages / Tools....................................................................... * Notice de cablage / Wiring instructions............................ * Sertissage / Crimping............................................................... * Schemas d'implantations pour circuits imprimes / Coordinates for PC tail............................................................. * Prise largable push-pull / Push-pull lanyard release plug................................................................................................ * Connecteurs filtres 8F51 / 8F51 filter connector........... * Connecteurs specifiques & accessoires SNC / Specific products & SNC accessories.................................................. * Traversee de cloison 851 RJ45 / 851 RJ45 feedthru.. * Traversee de cloison 851 USB / 851 USB feedtrhu..... * 8XE / 8XE.................................................................................... * Protection sans cadmium / Cadmium free plating......... Etendue de la gamme / Product Overview 851 851 RJ45 Feedthru page 4-63 page 65-68 851 USB Feedthru 8XE page 69-72 page 73-76 3 42 44-45 46-47 48-50 51 52-54 55-59 60-61 62 63 65-68 69-72 73-76 77 851 Series Presentation * * * * * * * Versions etanches et hermetiques Large choix de raccords et accessoires Protection cadmiee vert olive, oxydee anodique noire, nickelee ou zinc nickel Contacts a souder, a sertir, a picot droit ou pour enroulement de fils Contacts speciaux thermocouples La version 851 avec contacts a souder est qualifiee QPL (USA) La gamme 851 est aussi commercialisee par un reseau de distributeurs. Les connecteurs circulaires 851 Souriau, initialement concus pour la connexion des circuits electriques en aeronautique et armement, ont aujourd'hui conquis les domaines diversifies de l'electricite et de l'electronique industrielles (Mesure, Instrumentation, Transport, Machine, Outil, Productique...). Ils correspondent aux normes et specifications internationales et nationales en vigueur MIL-DTL-26482G serie 1, NFC 93422, HE 301B, VG 95328, liste GAM/T1. Les connecteurs fixes (embases) et mobiles (fiches), males ou femelles, se verrouillent entre eux par un systeme mecanique endurant du type a baionnette a 3 rampes helicoidales. Cinq clavettes de guidage longitudinal et cinq positionnements angulaires possibles de l'isolant assurent le detrompage entre connecteurs. Les mecaniques sont en alliage d'aluminium traite et protege pour la version 851 etanche, et en acier protege pour la version 851 hermetique. Les isolants sont en elastomere de la classe +125C pour la version etanche et en verre pour la version hermetique. Les contacts sont dores ou etames sur sous-couche nickel. Nous proposons, afin de faciliter le cablage, des contacts a souder et a picot taille 20 (y compris version hermetique) avec protection dorure sur la partie avant et etamage sur la partie arriere. 4 851 Series Presentation * * * * * * * Sealed and hermetic types Wide choice of body styles and back fittings Olive green, black anodised, nickel or zinc nickel plated Solder, crimp, PC-tail and wire-wrap versions Thermocouple crimp contacts available The 851 version with solder contacts is on US QPL 851 connectors are also widely available from distributors. Souriau 851 circular connectors were originally conceived to ensure reliable electrical connections in aircraft but their lightweight compact size and general characteristics have contributed to successful adoption in numerous civil and military aviation applications and also in the fields of professional and general electronics (machine tools, automation, measuring equipment...). 851 connectors conform to the following international standards, MIL-DTL-26482G series 1, NFC 93422, HE 301B, VG 95328, GAM/T1 list. 851 connectors feature a positive bayonet coupling mechanism which ensures reliable mechanical and electrical connection between mating halves. A helical locking ring on the plug couples with three dowel pegs on the receptacle ensuring rapid locking. Orientation and location is ensured by a system of five raised keys on the plugs which couple with corresponding slots on the receptacles. Connectors with different angular positioning of the insulator relative to the shell can be provided to prevent mating of adjacent connectors with the same contact arrangements. The connector shells are manufactured from aluminium alloy. The insulators are moulded from elastomer and are bonded into the shells. Grommets are also made from elastomer and are supplied with appropriate accessories in the solder version, but are integral with the insulator for the crimp version. Copper alloy contacts have gold or tin over nickel plating. Hermetic receptacles with gold plated solder contacts are made from steel shells with nickel plating (01H) or yellow cadmium plating (02H and 07H). The contacts are permanently fused into a glass insulator providing a high level of sealing. To facilitate cabling we offer solder and straight spill contacts size 20 (including hermetic versions) with a gold plated active part and tin plated terminations. 5 851 Series Description Connecteurs assembles avec contacts a sertir a clips Connectors with clip retained crimp contacts 1 2 3 4 5 6 7 8 * * * * * * * * Isolant arriere (passe-fils) Contact femelle a sertir Isolant femelle Isolant male Contact male a sertir Raccord simple Corps de fiche Embase 1 2 3 4 5 6 7 8 * * * * * * * * Rear insulator (grommet) Female crimp contact Female insulator Male insulator Male crimp contact Backnut Plug body Receptacle Contact femelle a souder Contact male a souder Isolant femelle Isolant male Isolant arriere (passe-fils) Embase a collerette carree Raccord simple Corps de fiche Ecrou de fixation Embase a fixation par ecrou Raccord simple (pour embase a fixation par ecrou) 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * Female solder contact Male solder contact Female insulator Male insulator Rear insulator (grommet) Square flange receptacle Backnut Plug body Fixing nut Jam nut receptacle Backnut (for jam nut receptacle) Connecteurs assembles avec contacts a souder Connectors assemblies with solder contacts 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * Connecteurs assembles (embase avec contacts a picots ou avec contacts pour connexions enroules) Connectors assemblies (receptacle with PC tail or wire-wrap terminals) 1 * Contact male ou femelle a souder ou a sertir 2 * Contact male ou femelle a picots droits 3 * Contact male ou femelle pour connexions enroulees 4 * Isolant male ou femelle 5 * Isolant arriere (passe-fils) 6 * Corps de fiche 7 * Raccord simple 8 * Isolant male ou femelle 9 * Embase sans possibilite de raccord 6 1 * Male or female crimp or solder contact 2 * Male or female PC tail contact 3 * Male or female wire-wrap contact 4 * Male or female insulator 5 * Rear insulator (grommet) 6 * Plug body 7 * Backnut 8 * Male or female insulator 9 * Receptacle not suitable for backshells 851 Series Tableau comparatif / Cross refence list Version 851 avec contacts a sertir (protection vert olive) 851 Version with crimp contacts (olive green cadmium plating) Connecteurs avec raccords / Connectors with backshells SOURIAU NCF 93422 (modele HE 301B) MIL-DTL-26482G serie 1 VG 95328 851 00 R .. .. .. 50 .. HE 301 B 00 R .. .. .. 1A * MS 3120 E .. .. .. VG 95328 A .. .. .. 851 00 RC .. .. .. 50 .. HE 301 B 00 RC .. .. .. 1A * MS 3120 F .. .. .. VG 95328 B .. .. .. 851 00 RP .. .. .. 50 .. HE 301 B 00 RP .. .. .. 1A * MS 3120 P .. .. .. 851 00 RG .. .. .. 50 .. 851 00 RA .. .. .. 50 .. VG 95328 R .. .. .. HE 301 B 00 RA .. .. .. 1A 851 01 R .. .. .. 50 .. HE 301 B 01 R .. .. .. 1A * MS 3121 E .. .. .. 851 01 RC .. .. .. 50 .. HE 301 B 01 RC .. .. .. 1A * MS 3121 F .. .. .. * MS 3121 P .. .. .. 851 01 RP .. .. .. 50 .. HE 301 B 01 RP .. .. .. 1A 851 01 RA .. .. .. 50 .. HE 301 B 01 RA .. .. .. 1A 851 02 R .. .. .. 50 .. HE 301 B 02 R .. .. .. 1A * MS 3122 E .. .. .. 851 06 R .. .. .. 50 .. HE 301 B 06 R .. .. .. 1A * MS 3126 E .. .. .. 851 06 RC .. .. .. 50 .. HE 301 B 06 RC .. .. .. 1A * MS 3126 F .. .. .. 851 06 RP .. .. .. 50 .. HE 301 B 06 RP .. .. .. 1A * MS 3126 P .. .. .. 851 06 RT .. .. .. 50 .. 851 06 RA .. .. .. 50 .. VG 95328 C .. .. .. VG 95328 K .. .. .. VG 95328 J .. .. .. HE 301 B 06 RA .. .. .. 1A 851 36 RG .. .. .. 50 .. VG 95328 M .. .. .. 851 36 RA .. .. .. 50 .. 851 07 R .. .. .. 50 .. HE 301 B 07 R .. .. .. 1A * MS 3124 E .. .. .. VG 95328 D .. .. .. 851 07 RC .. .. .. 50 .. HE 301 B 07 RC .. .. .. 1A * MS 3124 F .. .. .. VG 95328 E .. .. .. 851 07 RP .. .. .. 50 .. HE 301 B 07 RP .. .. .. 1A * MS 3124 P .. .. .. 851 07 RT .. .. .. 50 .. VG 95328 S .. .. .. 851 07 RG .. .. .. 50 .. VG 95328 T .. .. .. 851 76 RU .. .. .. 50 .. 851 08 RC .. .. .. 50 .. HE 301 B 08 RC .. .. .. 1A 851 08 RP .. .. .. 50 .. HE 301 B 08 RP .. .. .. 1A * Non QPL - Not QPL Autres protections / Other plating Protections Plating Anodique noire Black anodised Nickele Nickel Zinc Nickel RoHS Zinc Nickel RoHS SOURIAU Version a souder/Solder version Version a sertir/Crimp version NFC 93422 (modele HE 301B) 851 .. .. .. .. 5029 851 .. .. .. .. .. 50031 HE 301B .. .. .. .. .. 4A 851 .. .. .. .. 5044 851 .. .. .. .. .. 5044 HE 301B .. .. .. .. .. 5A 851 .. .. .. .. 57 851 .. .. .. .. 57 - 7 851 Series Tableau comparatif / Cross refence list Version 851 avec contacts a souder (protection vert olive) 851 Version with solder contacts (olive green cadmium plating) Connecteurs avec raccords / Connectors with backshells NCF 93422 (modele HE 301B) SOURIAU 851 00 E .. .. .. 50 .. 851 00 EC .. .. .. 50 .. 851 00 AC .. .. .. 50 .. 851 00 P .. .. .. 50 .. 851 00 A .. .. .. 50 .. 851 00 J .. .. .. 50 .. 851 00 JC .. .. .. 50 .. 851 01 E .. .. .. 50 .. 851 01 EC .. .. .. 50 .. 851 01 AC .. .. .. 50 .. 851 01 P .. .. .. 50 .. 851 01 A .. .. .. 50 .. 851 01 J .. .. .. 50 .. 851 01 JC .. .. .. 50 .. 851 02 E .. .. .. 50 .. 851 06 E .. .. .. 50 .. 851 06 EC .. .. .. 50 .. 851 06 AC .. .. .. 50 .. 851 06 P .. .. .. 50 .. 851 06 A .. .. .. 50 .. 851 06 J .. .. .. 50 .. 851 06 JC .. .. .. 50 .. 851 08 EC .. .. .. 50 .. 851 08 P .. .. .. 50 .. 851 07 E .. .. .. 50 .. 851 07 EC .. .. .. 50 .. 851 07 AC .. .. .. 50 .. 851 07 P .. .. .. 50 .. 851 07 A .. .. .. 50 .. MIL-DTL-26482G serie 1 HE 301 B 00 E .. .. .. 1A HE 301 B 00 EC .. .. .. 1A HE 301 B 00 AC .. .. .. 1A HE 301 B 00 P .. .. .. 1A HE 301 B 00 A .. .. .. 1A HE 301 B 00 J .. .. .. 1A VG 95328 MS 3110 E .. .. .. MS 3110 F .. .. .. MS 3110 P .. .. .. MS 3110 J .. .. .. MS 3111 E .. .. .. MS 3111 F .. .. .. HE 301 B 01 E .. .. .. 1A HE 301 B 01 EC .. .. .. 1A HE 301 B 01 AC .. .. .. 1A HE 301 B 01 P .. .. .. 1A HE 301 B 01 A .. .. .. 1A HE 301 B 01 J .. .. .. 1A MS 3111 P .. .. .. MS 3111 J .. .. .. MS 3112 E .. .. .. MS 3116 E .. .. .. MS 3116 F .. .. .. HE 301 B 02 E .. .. .. 1A HE 301 B 06 E .. .. .. 1A HE 301 B 06 EC .. .. .. 1A HE 301 B 06 AC .. .. .. 1A HE 301 B 06 P .. .. .. 1A HE 301 B 06 A .. .. .. 1A HE 301 B 06 J .. .. .. 1A VG 95328 H .. .. .. MS 3116 P .. .. .. MS 3116 J .. .. .. HE 301 B 08 EC .. .. .. 1A HE 301 B 08 P .. .. .. 1A HE 301 B 07 E .. .. .. 1A HE 301 B 07 EC .. .. .. 1A HE 301 B 07 AC .. .. .. 1A HE 301 B 07 P .. .. .. 1A HE 301 B 07 A .. .. .. 1A MS 3114 E .. .. .. MS 3114 F .. .. .. MS 3114 P .. .. .. Version 851 hermetique / 851 Hermetic version SOURIAU NFC 93422 (modele HE 301B) 851 02 H .. .. P.50 HE 301 B 02 H .. .. P.3A 851 07 H .. .. P.50 851 I H .. .. P.50 MIL-DTL-26482G serie 1 VG 95328 HE 301 B 07 H .. .. P.3A * MS 3114 H .. .. .. P. VG 95328 F .. .. .. HE 301 B 1 H .. .. P.3A * MS 3113 H .. .. .. P. VG 95328 G .. .. . * Non QPL - Not QPL 8 851 Series Caracteristiques techniques / Technical characteristics Mecaniques Boitier * Version etanche : alliage d'aluminium - Protection : - cadmie vert olive - oxydation anodique noire - cadmium incolore - nickele satine brillant - zinc cobalt (vert olive) - zinc nickel * Version hermetique : acier - Protection : - cadmie jaune irise - nickele Isolant * Partie avant : elastomere neoprene (durete 85 shore) * Partie arriere (passe-fils) : elastomere neoprene (durete 40 shore) Contact * A sertir : montable et demontable par l'arriere de l'isolant et retenu par clips metalliques, a souder et a picot non demontable, a connexion enroulee demontable et non demontable * Matiere : alliage cuivreux * Protection : or ou or sur parties actives et etain/plomb sur parties raccordement * Effort mini de retention des contacts dans l'isolant Taille des contacts A sertir a clip A souder A picot A wrapper 20 (O1mm) 68 N 68 N 16 (O1.6mm) 113 N 113 N * Endurance mecanique : 500 cycles complets (verrouillage et deverrouillage) Vibration Selon NFC 20-616 Mechanical Shell * Environmental version : aluminium alloy - Plating : - olive green cadmium - black anodised - white cadmium - satin finish bright nickel - zinc cobalt (olive green) - zinc nickel * Hermetic version : steel - Plating : - iridescent yellow cadmium - nickel Isolant * Front section : neoprene elastomer (85 shore) * Rear section : neoprene elastomer (40 shore) Contact * Crimp : inserted and removed from rear of insulator retained by metallic clips, solder and PC tail, non removable, wire-wrap removable or not removable * Material : copper alloy * Plating : gold overall or gold plated active zone and tin/lead plated termination * Min retention force of contacts in insulator Contact size Crimp Solder PC tail Wire wrap 20 (O1mm) 68 N 68 N 16 (O1.6mm) 113 N 113 N * Mechanical endurance : 500 cycles (full mating-unmating) Vibration To NFC 20-616 Electriques Tension de tenue * A pression normale : connecteurs accouples et non accouples - 1500 Veff entre contacts taille 20 (service 1) - 2300 Veff entre contacts taille 16 (service 2) - 1500 Veff entre contacts panaches de taille 16 et de taille 20 (service 1) * A basse pression 10 mbar : connecteurs accouples et non accouples - 200 Veff entre contacts taille 20 (service 1) - 300 Veff entre contacts taille 16 (service 2) Resistance d'isolement 5000 M sous 500 Vcc Intensite admissible par contact Taille 20 = 7,5 A / Taille 16 = 13 A Resistance de contact * Version etanche : Taille 20 4 m / Taille 16 3 m * Version hermetique : Taille 20 30 m / Taille 16 14 m Blindage 70 dB a 5 MHz / 40 dB a 100 MHz Tension de claquage mini Breakdown voltage (mini) Electrical Dielectric withstanding voltage * At standard pressure : mated and unmated connectors - 1500 Vrms between size 20 contacts (service 1) - 2300 Vrms between size 16 contacts (service 2) - 1500 Vrms between mixed size 20 and 16 contacts (service 1) * At reduced pressure 10 mbar : connectors mated and unmated - 200 Vrms between size 20 contacts (service1) - 300 Vrms between size 16 contacts (service2) Insulation resistance 5000 M under 500 Vcc Current rating per contact Size 20 = 7.5 A / Size 16 = 13 A Contact resistance * Environmental version : Size 20 4 m / Size 16 3 m * Hermetic version : Size 20 30 m / Size 16 14 m Shielding 70 dB to 5 MHz / 40 dB to 100 MHz Climatiques Temperature d'utilisation -55C a +125C Etancheite * Version contact a sertir sous pression differentielle de 1 bar, fuite 8 cm3/heure * Version contact a souder sous pression differentielle de 2 bars, fuite 16 cm3/heure Hermeticite * Sous pression differentielle de 1 bar, fuite 2,8 mm3/heure Tenue aux agents chimiques : suivant norme MIL-DTL-26482G serie 1 et NFC 93422 HE 301 B code A Resistance au brouillard salin * 48 heures, a temperature ambiante Chaleur humide : 21 jours Climatic Working temperature -55C to +125C Sealing * Crimp contact version, 1 bar differential pressure, leakage 8 cm3/hr * Solder contact version, 2 bar differential pressure, leakage 16 cm3/hr Hermiticity * 1 bar differential pressure, leakage 2.8 mm3/hr Chemical resistance : to MIL-DTL-26482G series 1 and NFC 93422 - HE 301 B code A Resistance to salt spray * 48 hours at environmental temperature Damp heat : 21 days 9 851 Series Contacts Contacts a sertir / Crimp contacts pour arrangements 8-2, 8-3, 8-4 & 12-14 for layouts 8-2, 8-3, 8-4 & 12-14 femelle female male male Type de contact / Contact type References Part numbers 8500-9213 900* autre arrangement for further contact layout male male 8500-697 femelle female chromel alumel 8500-9331 900 femelle female min. max. 0.21 a/to 0.93 24 a/to 18 1.20 2.11 0.93 a/to 1.91 18 a/to 14 1.60 2.80 20 8500-781 B1 0.06 a/to 0.21 30 a/to 24 16 8500-1985 B1 0.60 20 0.21 a/to 0.93 24 a/to 18 1.20 2.11 0.93 a/to 1.91 18 a/to 14 1.60 2.80 8500-809 A 8500-812 A 20 8500-2054 900 8500-2055 900 8500-1053 male male alumel femelle female alumel chromel 8500-1300 16 male male embout reducteur reducing sleeve chromel Jauge Gauge AWG 8500-1758A 900 male male femelle female standards standard thermocouple thermocouple alumel Section (mm) 8500-9573* 20 chromel O exterieur sur gaine O over insulation Cable admissible Cable acceptance Taille de contact Contact size 8500-1058 16 8500-1054 900 8500-1059 900 References Part numbers Diagonales Diagonals Jauge Gauge (AWG) Nombre d'enroulements Number of wraps 8500-4220 MQ 0.78 0.85 26 28 30 3 femelle female 8500-9351 900 0.78 0.85 26 28 30 3 male male Contacts pour connexions enroulees / Wire-wrap contacts 8500-4304 LY 1.55 1.70 20 22 24 26 3 8500-4305 900 1.55 1.70 20 22 24 26 3 Taille de contact Contact size male male Type de contact Contact type 20 femelle female 16 10 851 Series References / Ordering Information Connecteurs etanches / Environmental connectors Racine / Basic series Version a souder / Solder version Version a sertir / Crimp version 851 851 00 00 E R 8 8 3A 3A P P - 50 50 Type de boitier / Shell type a souder a sertir solder crimp embase a collerette carree avec possibilite de raccord 00 00 square flange receptacle accepting backshells prolongateur / cable connecting receptacle 01 01 embase a collerette carree sans possibilite de raccord 02E 02R square flange receptacle not accepting backshells embase a fixation par ecrou avec possibilite de raccord 07 07 jam nut receptacle accepting backshells embase a fixation par ecrou sans possibilite de raccord 07A jam nut receptacle not accepting backshells fiche droite sans bague de blindage 06 06 plug for use with straight backshells fiche avec raccord coude sans bague de blindage 08 08 plug for use with 90 backshells fiche droite avec bague de blindage 36 36 screened plug for use with straight backshells fiche droite avec bague de blindage et doigt de verrouillage 76 76 screened plug with lock finger Type de raccord / Backshell type Voir tableau page 12 - See table page 12 Taille de boitier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = male/male - S = femelle/female Positionnement / Orientation Normal (n'apparait pas dans la reference) w, x, y, z - voir tableau page 16 Normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix B version a sertir sans clip avec arrangements 8-2 / 8-3 / 8-4 / 12-14 crimped version without clip which used layouts 8-2 / 8-3 / 8-4 / 12-14 50 contacts a sertir: dores, toutes tailles / crimp contacts: gold plated, all sizes contacts a souder: taille 20, contacts dores en partie active + etames en partie arriere sauf arrangements 8-2, 8-3, 8-4 &12-14; taille 16, contacts dores; mixte taille 20 & 16, contacts dores / Solder contacts: size 20, contacts with gold plated active zone + tin plated termination area except layouts 8-2, 8-3, 8-4 &12-14; size 16, gold plated contacts all over; Mix size 20 & 16, gold plated contacts all over 51 contacts a souder taille 20: dores / solder contacts gold plated size 20 54 protection zinc nickel noir (contacts: idem specif.50) / black zinc nickel plating (contacts idem specif.50) 57 protection zinc nickel noir (contacts dores: idem specif.50) / black zinc nickel plating (gold plated contacts idem specif.50) Specification / Specification sans specification: protection cadmiee vert olive / without specification: olive green cadmium plating 29 protection oxydation anodique noire (version a souder) / black anodised (solder version) 031 protection oxydation anodique noire (version a sertir) / black anodised (crimp version) 44 protection nickelee / nickel plating Pour raccord a reprise de tresse T & RT Voir page 12 38 protection nickelee / nickel plating See page 12 42 protection cadmiee vert olive / olive green cadmium plating Backshell for screen termination, type T & RT 66 version a sertir: livree sans raccord, ni bague conique /crimp version: delivered without backshell, nor conical ring version a souder: idem version a sertir + sans grommet / solder version: idem crimp version + no grommet Q7 protection cadmiee vert olive, 500 heures brouillard salin - versions a sertir et a souder / olive green cadmium plating, salt spray 500 hr - crimp and solder versions R3 protection cadmiee vert olive, 500 heures brouillard salin - versions a picots / olive green cadmium plating, salt spray 500 hr - PC tail version G4 version a sertir: protection nickelee, livree sans raccord, ni bague conique / crimp version: nickel plating, delivered without backshell, nor conical ring version a souder: idem version a sertir + sans grommet / solder version: idem crimp version + no grommet ] * 11 * * * ] ----- 851 Series Types de raccord / Backshell types a souder solder a sertir crimp E R EC EC a souder solder a sertir crimp 00 01 07 06 08 36 76 00 01 07 06 08 36 76 raccord simple backnut 17 26 22 31 - - - 17 26 22 31 - - - RC raccord droit a serre-cables straight cable clamp 17 26 22 31 - - - 17 26 22 31 - - - RC raccord coude a serre-cables 90 cable clamp - - - - 35 - - - - - - 35 - - raccord droit a serre-cables sans passe-fils straight cable clamp without grommet 17 26 22 31 - - - - - - - - - - AC P RP raccord droit pour potting straight backshell for potting 18 27 23 32 - - - 18 27 23 32 - - - P RP raccord coude pour potting 90 backshell for potting - - - - 35 - - - - - - 35 - - A RA raccord droit intermediaire straight adaptor 18 27 - 32 - 36 - 18 27 - 32 - 36 - T RT raccord droit pour gaine thermoretractable straight backshell for heatshrink sleeving 19 28 23 33 - - - 19 28 23 33 - - - RM raccord droit demontable pour gaine thermoretractable straight removable backshell for heatshrink sleeving 19 28 - 33 - - - 19 28 - 33 - - - T * RT* raccord droit demontable pour reprise de tresse et gaine thermoretractable straight removable backshell for screen termination and heatshrink sleeving Pour specif. 38 & 42 / for specif. 38 & 42 20 29 24 - - 36 - 20 29 24 - - 36 - G RG raccord droit demontable pour reprise de tresse et gaine thermoretractable straight removable backshell for screen termination and heatshrink sleeving 20 29 24 - - 37 - 20 29 24 - - 37 - raccord droit a presse-etoupe straight backshell with sealing gland 21 30 - 34 - - - - - - - - - - JC raccord droit a presse-etoupe et serre-cables straight backshell with sealing gland and cable clamp 21 30 - 34 - - - - - - - - - - U RU raccord droit court pour reprise de tresse et gaine thermoretractable short backshell for screen termination and heatshrink sleeving - - - - - - 38 - - - - - - 38 Z RZ raccord droit intermediaire pour adaptation de raccord au pas electrique straight adaptor for electrical pich access - - - 37 - - - - - - 37 - - - M J - Embases sans possibilite de raccord - 02E/02R/07A - voir page 25 - Receptacle not accepting backshells - 02E/02R/07A - see page 25 12 851 Series References / Ordering Information Connecteurs hermetiques q / Hermetic connectors Racine / Basic series 851 02H 8 3A P - 50 -- 50 16 Type de boitier / Shell type 02H embase a collerette carree / square flange receptacle 07H embase a fixation par ecrou / jam nut receptacle IH embase a collerette ronde fixation par brasage / solder fixing receptacle Taille de boitier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = male uniquement / male only Positionnement / Orientation normal (n'apparait pas dans la reference) w, x, y, z - voir tableau page 16 normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix 50 Contacts #20 et # 16: dores Gold plating for size 20 and size 16 Specification / Specification sans specification: 02H et 07H, protection cadmiee jaune / without specification: 02H and 07H, yellow cadmium plating sans specification: IH, protection nickelee / IH, nickel 44 02H et 07H, protection nickelee / 02H and 07H, nickel Connecteurs a picots & connexions enroulees / PC tail & wire-wrap connectors Racine / Basic series 851 02E 8 3A P - Type de boitier / Shell type 02E embase a collerette carree sans possibilite de raccord square flange receptacle not accepting backshell 07A embase a fixation par ecrou sans possibilite de raccord jam nut receptacle not accepting backshell Taille de boitier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau page 14/15 - See table page 14/15 Type de contact / Contact type P = male/male - S = femelle/female Positionnement / Orientation normal (n'apparait pas dans la reference) w, x, y, z - voir tableau page 16 normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix 50 contacts a picots: taille 20, contacts dores en partie active + etames en partie arriere sauf arrangements 8-2, 8-3, 8-4 & 12-14; Taille 16, contacts dores; Mixte taille 20 & 16, contacts dores / PC tail contacts: size 20, contacts with gold plated active zone + tin plated termination area except 8-2, 8-3, 8-4 & 12-14 layouts; Size 16, gold plated contacts all over; Mix size 20 & 16, gold plated contacts all over 51 contacts a picots taille 20: dores / gold plating for PC tail contacts size 20 54 protection zinc nickel noir (contacts: idem specif.50) / black zinc nickel plating (contacts idem specif.50) 57 protection zinc nickel noir (contacts dores: idem specif.50) / black zinc nickel plating (gold plated contacts idem specif.50) Specification obligatoire / Obligatory specification - contact O 1 mm, picot de O 0.6 mm / contact O 1.6 mm, picot de O 1 mm a picot droit 16: corps cadmie vert olive - contact O 1 mm, picot de O 0.6 mm / contact O 1.6 mm, picot de O 1 mm a picot droit 45: corps nickele pour connexion 34: contacts demontables, corps cadmie vert olive (voir tableau page 10) enroulee 34A: contacts non demontables, corps cadmie vert olive PC tail a picot droit wire-wrap - O 1 mm contact, O 0.6 mm terminal / O 1.6 mm contact, O 1 mm terminal 16: olive green cadmium plated body - O 1 mm contact, O 0.6 mm terminal / O 1.6 mm contact, O 1 mm terminal 45: nickel plating 34: non-banded contacts, olive green cadmium plated shell (see table, page 10) 34A: banded contacts, olive green cadmium plated 13 851 Series Arrangements / Contact layouts Vue de face avant isolant male / Viewed from front face of male insulator 8 2* 10 3* 2 O 1 (#20) 3A/98 3 O 1 (#20) 4* 33 6 3 O 1 (#20) Clips 4 O 1 (#20) 3 O 1 (#20) Clips 8 10 14* 7 6 O 1 (#20) 7 O 1 (#20) 12 3 2 2 O 1.6 (#16) 3 O 1.6 (#16) 8 O 1 (#20) 10 O 1 (#20) 14 O 1 (#20) 14 12 5 5 O 1.6 (#16) 15 8 O 1 (#20) 4 O 1.6 (#16) 18 18 O 1 (#20) 19 O 1 (#20) 14 O 1 (#20) 1 O 1.6 (#16) 19 16 8 18 23 8 O 1.6 (#16) 26 22 O 1 (#20) 1 O 1.6 (#16) 11 32 30 26 O 1 (#20) 11 O 1.6 (#16) 32 O 1 (#20) 14 98 + 29 O 1 (#20) 1 O 1.6 (#16) 6 O 1 (#20) 851 Series 20 16 24 16 O 1.6 (#16) + 24 O 1 (#20) 39 27 25 + 25 O 1 (#20) 27 O 1 (#20) 41 37 O 1 (#20) 41 O 1 (#20) 2 O 1.6 (#1.6) 22 24 32 21 21 O 1.6 (#16) 34 + 32 O 1 (#20) 36 34 O 1 (#20) 61 55 36 O 1 (#20) 55 O 1 (#20) 61 O 1 (#20) Arrangements contacts a souder (QPL) / Solder contact layouts (QPL) Arrangements contacts a souder / Solder contact layouts + Arrangements contacts a souder sans possibilite de passe-fils / Solder contact layouts without grommet Arrangements contacts a sertir / Crimp contact layouts Arrangements version hermetique / Hermetic version contact layouts Arrangements contacts a picots / PC tail contact layouts Arrangements contacts pour connexions enroulees / Wire-wrap contact layouts Version a sertir avec clip de retention n'existe pas / Crimp version do not exist with retention clip * Autres arrangements, nous consulter / Other layouts, please consult us 15 851 Series Positionnements / Orientations Isolant tournant a l'interieur du corps metallique / Insulator rotated inside metal body Vue face avant isolant male (corps d'embase ou corps de fiche) / Viewed from front face of male insulator (receptacle or plug) boitiers shells 8 10 12 14 16 18 20 22 24 angles en degres / angle in degrees arrangements layouts W 2 3 NFC 93422 HE 301B X Y Z 58 122 - - 60 210 - - 3A (98)* 60 210 - - 4 45 - - - 33 90 - - - 6 90 - - - 7* 90 - - - 98 90 180 240 270 3 - - 180 - 8 90 112 203 292 10 60 155 270 295 2 - - - - 14* 45 5 40 92 184 273 12 43 90 - - 15 17 110 155 234 18 15 90 180 270 19 30 165 315 - 8 54 152 180 331 23 158 270 - - 26 60 - 275 338 11 62 119 241 340 32 85 138 222 265 30 180 193 285 350 16 238 318 333 347 39 63 144 252 333 41 45 126 225 - 24 70 145 215 290 25 72 144 216 288 27 72 144 216 288 21 16 135 175 349 36 72 144 216 288 55 30 142 226 314 32 72 145 215 288 34 62 142 218 298 61 90 180 270 324 souder solder * MIL-DTL-26482G serie 1 sertir crimp service1 1500 Veff 1500 Vrms sertir crimp souder solder * * * * * * * * * * X * * * * * * * * X service 2 2300 Veff 2300 Vrms X X * X X X X * * * * X X X X * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * X * * * * * * * * * * * * * * * X X X X X X X X X X X X X X X X * * * * * * * * * X X X * * * Arrangement 8-98 : positionnements W et X non normalises / 8-98 layout, W and X non standard ortientations Arrangements 10-7 & 12-14 : positionnement W non normalise / 10-7 & 12-14 layouts, W non standard orientation 16 * * * * * * X X X X 851 Series Encombrements / Dimensions Embase a collerette carree avec raccord simple Square flange receptacle with backnut HE 301 B 00 E 00 E MS 3110 E HE 301 B 00 R 00 R MS 3120 E VG 95328 A Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 00 E 8.. 10 851 00 E 10.. 12 851 00 E 12.. 14 851 00 E 14.. 16 851 00 E 16.. 18 20 . 50.. P S L max contacts a sertir crimp contacts 851 00 R 8.. P S . 50.. sertir crimp A B max C max D max E F max J 3.13 32.70 32.00 12.03 11.70 1.32 13.50 15.09 20.99 . 50.. 32.70 32.00 15.01 11.70 1.32 16.70 18.26 24.19 3.13 P S . 50.. 32.70 32.00 19.07 11.70 1.32 19.90 20.62 26.54 3.13 P S . 50.. 32.70 32.00 22.25 11.70 1.32 23.40 23.00 28.89 3.13 . 50.. 32.70 32.00 25.42 11.70 1.32 26.60 24.61 31.29 3.13 P S . 50.. 32.70 32.00 28.60 11.70 1.32 29.50 26.97 33.69 3.13 851 00 R 20.. P S . 50.. 34.50 33.40 31.77 14.35 2.15 32.70 29.36 36.89 3.13 . 50.. 851 00 R 22.. P S . 50.. 34.50 33.40 34.95 14.35 2.15 36.00 31.75 39.99 3.13 . 50.. 851 00 R 24.. P S . 50.. 34.50 33.40 38.12 15.20 2.15 39.10 34.92 43.15 3.81 . 50.. 851 00 R 10.. P S . 50.. 851 00 R 12.. P S . 50.. 851 00 R 14.. P S . 50.. 851 00 R 16.. P S 851 00 E 18.. P S . 50.. 851 00 R 18.. 851 00 E 20.. P S . 50.. 22 851 00 E 22.. P S 24 851 00 E 24.. P S P S souder solder P S Embase a collerette carree avec raccord droit a serre-cables Square flange receptacle with straight cable clamp backshell HE 301 B 00 EC 00 EC MS 3110 F 00 AC HE 301 B 00 AC HE 301 B 00 RC 00 RC MS 3120 F VG 95328 B Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 00 EC AC 8.. EC AC 10 851 00 12 851 00 EC AC 12.. P S 10.. L max P S D max 11.70 1.32 19.90 15.09 20.99 3.50 3.13 11.70 1.32 21.50 18.26 24.19 5.00 3.13 1.32 25.00 20.62 26.54 8.20 3.13 A . 50 .. 48.00 47.30 12.03 P S . 50.. 48.00 47.30 15.01 47.30 19.07 11.70 . 50.. 851 00 RC 8.. . 50.. 851 00 RC 10.. . 50.. 851 00 RC 12.. P S . 50.. 48.00 P S C max sertir crimp P S P S B max souder solder contacts a sertir crimp contacts E F max G J 14 851 00 . 50.. 851 00 RC 14.. P S . 50.. 48.00 47.30 22.25 11.70 1.32 27.80 23.00 28.89 10.00 3.13 16 851 00 EC AC 16.. P S . 50.. 851 00 RC 16.. P S . 50.. 51.00 50.50 25.42 11.70 1.32 29.40 24.61 31.29 13.00 3.13 18 851 00 EC AC 18.. P S . 50.. 851 00 RC 18.. P S . 50.. 51.00 50.50 28.60 11.70 1.32 35.30 26.97 33.69 16.00 3.13 EC AC 14.. 20 851 00 20.. P S . 50.. 851 00 RC 20.. P S . 50.. 53.00 51.50 31.77 14.35 2.15 35.30 29.36 36.89 16.00 3.13 22 851 00 EC AC 22.. P S . 50.. 851 00 RC 22.. P S . 50.. 53.00 51.50 34.95 14.35 2.15 41.10 31.75 39.99 19.30 3.13 24 851 00 EC AC 24.. P S . 50.. 851 00 RC 24.. P S . 50.. 53.00 51.50 38.12 15.20 2.15 42.40 34.92 43.15 20.60 3.81 EC AC Note : toutes les dimensions sont en mm / all dimensions are in mm 17 851 Series Embase a collerette carree avec raccord droit pour potting Square flange receptacle with straight backshell for potting HE 301 B 00 P 00 P MS 3110 P HE 301 B 00 RP 00 RP MS 3120 P Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 00 P 8.. 10 851 00 P 10.. 12 851 00 P 12.. P S 14 851 00 P 14.. P S 16 851 00 P 16.. P S 18 851 00 P 18.. 20 P S . 50.. L max souder solder sertir crimp A B max C max D max . 50 .. 36.20 41.70 12.03 11.70 1.32 15.34 P S . 50.. 36.20 41.70 15.01 11.70 1.32 17.70 contacts a sertir crimp contacts 851 00 RP 8.. P S F max G max 15.09 20.99 10.46 3.13 18.26 24.19 13.55 3.13 13.96 3.13 3.13 E J . 50.. 851 00 RP 10.. . 50.. 851 00 RP 12.. P S . 50.. 36.20 41.70 19.07 11.70 1.32 21.69 20.62 26.54 . 50.. 851 00 RP 14.. P S . 50.. 36.20 41.70 22.25 11.70 1.32 23.90 23.00 28.89 17.42 . 50.. 851 00 RP 16.. P S . 50.. 36.20 41.70 25.42 11.70 1.32 27.00 24.61 31.29 20.56 3.13 P S . 50.. 851 00 RP 18.. P S . 50.. 36.91 44.46 28.60 11.70 1.32 30.50 26.97 33.69 23.66 3.13 851 00 P 20.. P S . 50.. 851 00 RP 20.. P S . 50.. 43.80 50.93 31.77 14.35 2.15 33.65 29.36 36.89 23.92 3.13 22 851 00 P 22.. P S . 50.. 851 00 RP 22.. P S . 50.. 43.80 50.93 34.95 14.35 2.15 37.10 31.75 39.99 25.52 3.13 24 851 00 P 24.. P S . 50.. 851 00 RP 24.. P S . 50.. 43.80 51.40 38.12 15.20 2.15 40.00 34.92 43.15 32.00 3.81 P S Embase a collerette carree avec raccord droit intermediaire Square flange receptacle with straight adaptor 00 A 00 RA Taille de boitier Shell size 8 HE 301 B 00 A HE 301 B 00 RA References / Part numbers contacts a souder solder contacts 851 00 A 8.. P S . 50.. L max contacts a sertir crimp contacts 851 00 RA 8.. . 50 .. P S souder solder K B max C max D max E F max G max J 12.03 11.70 1.32 14.50 15.09 20.99 9.10 3.13 1/2 18 sertir crimp 41.00 filetage threading A UNEF 2A 10 851 00 A 10.. P S . 50.. 41.00 15.01 11.70 1.32 18.70 18.26 24.19 12.08 3.13 5/8 24 12 851 00 A 12.. P S . 50.. 851 00 RA 12.. P S . 50.. 41.00 19.07 11.70 1.32 21.70 20.62 26.54 15.25 3.13 3/4 20 851 00 A 14.. P S . 50.. 851 00 RA 14.. P S . 50.. 41.00 22.25 11.70 1.32 25.10 23.00 28.89 18.15 3.13 7/8 20 16 851 00 A 16.. P S . 50.. 851 00 RA 16.. . 50.. 41.00 25.42 11.70 1.32 28.13 24.61 31.29 21.32 3.13 1-20 18 851 00 A 18.. P S . 50.. 851 00 RA 18.. PS . 50.. 41.00 28.60 11.70 1.32 31.38 26.97 33.69 24.32 3.13 1-3/16 18 20 851 00 A 20.. P S . 50.. 851 00 RA 20.. PS . 50.. 44.00 31.77 14.35 2.15 34.30 29.36 36.89 26.73 3.13 1-3/16 18 851 00 A 22.. P S . 50.. 851 00 RA 22.. . 50.. 44.00 34.95 14.35 2.15 37.60 31.75 39.99 30.67 3.13 1-7/16 18 851 00 A 24.. P S . 50.. 851 00 RA 24.. PS . 50.. 44.00 38.12 15.20 2.15 40.70 34.92 43.15 33.08 3.81 1-7/16 18 14 22 24 . 50.. 851 00 RA 10.. P S P S P S Note : toutes les dimensions sont en mm / all dimensions are in mm 18 851 Series Embase a collerette carree avec raccord pour gaine thermoretractable Square flange receptacle with straight backshell for heatshrink sleeving 00 T 00 RT Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S . 50.. L max contacts a sertir crimp contacts 8 851 00 T 8.. 10 851 00 T 10.. 12 851 00 T 12.. P S . 50.. 851 00 RT 12.. 14 851 00 T 14.. P S . 50.. 851 00 RT 14.. 16 P S C max D max E F max souder solder J M max 36.70 36.00 12.03 11.70 1.32 15.35 15.09 20.99 11.70 1.32 18.15 18.26 24.19 10.20 P S . 50.. 36.70 36.00 19.07 11.70 1.32 23.45 20.62 26.54 13.20 11.95 3.13 3.70 P S . 50.. 36.70 36.00 22.25 11.70 1.32 24.25 23.00 28.89 16.10 15.15 3.13 3.70 851 00 T 16.. PS . 50.. 851 00 RT 16.. PS . 50.. 39.00 38.30 25.42 11.70 1.32 29.55 24.61 31.29 19.25 18.05 3.13 3.70 P S P S . 50.. 851 00 RT 18.. P S 7.20 sertir crimp 36.70 36.00 15.01 . 50.. 851 00 RT 10.. . 50 .. sertir crimp B max . 50.. P S 851 00 RT 8.. souder solder G max A 6.70 3.13 3.70 9.40 3.13 3.70 18 851 00 T 18.. . 50.. 39.00 38.30 28.60 11.70 1.32 31.75 26.97 33.69 21.30 19.95 3.13 3.70 20 851 00 T 20.. PS . 50.. 851 00 RT 20.. PS . 50.. 45.30 44.20 31.77 14.35 2.15 35.85 29.36 36.89 24.40 23.05 3.13 3.70 22 851 00 T 22.. PS . 50.. 851 00 RT 22.. PS . 50.. 45.30 44.20 34.95 14.35 2.15 38.20 31.75 39.99 27.50 25.55 3.13 3.70 24 851 00 T 24.. PS . 50.. 851 00 RT 24.. PS . 50.. 44.00 42.60 38.12 2.15 41.30 34.92 43.15 30.60 28.65 3.81 3.70 15.20 Embase a collerette carree avec raccord droit demontable pour gaine thermoretractable Square flange receptacle with removable straight backshell for heatshrink sleeving 00 M 00 RM Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S . 50.. L max contacts a sertir crimp contacts 851 00 M 8.. 10 851 00 M 10.. PS . 50.. 851 00 RM 10.. 12 851 00 M 12.. PS . 50.. P S . 50.. 851 00 RM 8.. P S 8 souder solder sertir crimp A B max C max D max E F max G max J M max . 50 .. 50.00 12.03 11.70 1.32 13.55 15.09 20.99 7.05 3.13 3.50 P S . 50.. 50.00 15.01 11.70 1.32 15.35 18.26 24.19 9.90 3.13 3.50 50.00 19.07 11.70 1.32 19.48 20.62 26.54 12.60 3.13 3.50 3.50 851 00 RM 12.. P S . 50.. 851 00 RM 14.. P S 14 851 00 M 14.. . 50.. 50.00 22.25 11.70 1.32 21.30 23.00 28.89 15.90 3.13 16 851 00 M 16.. P S . 50.. 851 00 RM 16.. P S . 50.. 50.00 25.42 11.70 1.32 24.50 24.61 31.29 18.95 3.13 3.50 18 851 00 M 18.. P S . 50.. 851 00 RM 18.. P S . 50.. 50.00 28.60 11.70 1.32 26.45 26.97 33.69 20.90 3.13 3.50 20 851 00 M 20.. P S . 50.. 851 00 RM 20.. P S . 50.. 53.30 31.77 14.35 2.15 30.73 29.36 36.89 23.70 3.13 3.50 22 851 00 M 22.. P S . 50.. 851 00 RM 22.. P S . 50.. 53.30 34.95 14.35 2.15 34.24 31.75 39.99 26.60 3.13 3.50 24 851 00 M 24.. P S . 50.. 851 00 RM 24.. P S . 50.. 53.30 38.12 15.20 2.15 36.47 34.92 43.15 29.30 3.81 3.50 Note : toutes les dimensions sont en mm / all dimensions are in mm 19 851 Series Embase a collerette carree avec raccord droit demontable pour reprise de tresse et gaine thermoretractable (specifications 38 & 42) / Square flange receptacle with removable backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 00 T 00 RT Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S . 50 L max contacts a sertir crimp contacts 38 42 851 00 RT 8.. P S 8 851 00 T 8.. 10 851 00 T 10.. P S 12 851 00 T 12.. P S . 50 14 851 00 T 14.. P S 16 851 00 T 16.. PS . 50 38 42 851 00 RT 16.. 38 42 sertir crimp A B max C max D max E F max G max J M max 51.60 12.03 11.70 1.32 18.25 15.09 20.99 7.45 3.13 3.70 P S . 50 38 42 51.60 15.01 11.70 1.32 20.25 18.26 24.19 9.00 3.13 3.70 851 00 RT 12.. P S . 50 38 42 51.60 19.07 11.70 1.32 24.75 20.62 26.54 13.30 3.13 3.70 . 50 38 42 851 00 RT 14.. P S . 50 38 42 51.60 22.25 11.70 1.32 27.75 23.00 28.89 16.50 3.13 3.70 P S . 50 38 42 51.60 25.42 11.70 1.32 30.05 24.61 31.29 18.50 3.13 3.70 . 50 38 42 3.70 . 50 38 42 851 00 RT 10.. 38 42 . 50 souder solder 18 851 00 T 18.. P S 851 00 RT 18.. P S 52.00 28.60 11.70 1.32 34.15 26.97 33.69 21.90 3.13 20 851 00 T 20.. P S . 50 38 42 851 00 RT 20.. P S . 50 38 42 55.10 31.77 14.35 2.15 37.25 29.36 36.89 25.10 3.13 3.70 22 851 00 T 22.. P S . 50 38 42 851 00 RT 22.. P S . 50 38 42 55.10 34.95 14.35 2.15 40.45 31.75 39.99 28.20 3.13 3.70 24 851 00 T 24.. P S . 50 38 42 851 00 RT 24.. P S . 50 38 42 55.10 38.12 15.20 2.15 43.65 34.92 43.15 31.40 3.81 3.70 . 50 38 42 Embase a collerette carree avec raccord droit demontable pour reprise de tresse et gaine thermoretractable / Square flange receptacle with removable straight backshell for screen termination and heatshrink sleeving 00 G 00 RG Taille de boitier Shell size 8 VG 95328 R References / Part numbers contacts a souder solder contacts 851 00 G 8.. P S L max contacts a sertir crimp contacts souder solder sertir crimp .50.. 851 00 RG 8.. PS .50 .. 54.00 A B max C max D max E F max G max J M max 12.03 11.70 1.32 16.30 15.09 20.99 7.45 3.13 3.60 10 851 00 G 10.. P S .50.. 851 00 RG 10.. P S .50.. 54.00 15.01 11.70 1.32 18.30 18.26 24.19 10.30 3.13 3.60 12 851 00 G 12.. P S .50.. 851 00 RG 12.. P S .50.. 54.00 19.07 11.70 1.32 22.30 20.62 26.54 13.20 3.13 3.60 14 851 00 G 14.. P S .50.. 851 00 RG 14.. P S .50.. 54.00 22.25 11.70 1.32 25.30 23.00 28.89 16.50 3.13 3.60 16 851 00 G 16.. P S .50.. 851 00 RG 16.. P S .50.. 54.00 25.42 11.70 1.32 28.30 24.61 31.29 19.35 3.13 3.60 18 851 00 G 18.. P S .50.. 851 00 RG 18.. PS .50.. 54.00 28.60 11.70 1.32 32.30 26.97 33.69 21.60 3.13 3.60 20 851 00 G 20.. P S .50.. 851 00 RG 20.. PS .50.. 59.30 31.77 14.35 2.15 34.30 29.36 36.89 24.80 3.13 3.60 22 851 00 G 22.. P S .50.. 851 00 RG 22.. .50.. 59.30 34.95 14.35 2.15 38.30 31.75 39.99 27.90 3.13 3.60 24 851 00 G 24.. P S .50.. 851 00 RG 24.. PS .50.. 59.30 38.12 15.20 2.15 41.30 34.92 43.15 31.00 3.81 3.60 P S Note : toutes les dimensions sont en mm / all dimensions are in mm 20 851 Series Embase a collerette carree avec raccord droit presse-etoupe Square flange receptacle with straight sealing gland backshell 00 J Taille de boitier Shell size HE 301 B 00J References / Part numbers contacts a souder solder contacts 8 851 00 J 8.. 10 851 00 J 10.. . 50.. 12 851 00 J 12.. 14 851 00 J 14.. 16 851 00 J 16.. P S 18 851 00 J 18.. 20 L max G contacts a sertir crimp contacts souder solder sertir crimp A B max C max D max E F max min max J - 47.60 - 12.03 11.70 1.32 14.40 15.09 20.99 5.02 5.84 3.13 . 50.. - 47.60 - 15.01 11.70 1.32 17.60 18.26 24.19 5.94 6.76 3.13 P S . 50.. - 48.70 - 19.07 11.70 1.32 21.10 20.62 26.54 9.34 10.16 3.13 P S . 50.. - 53.50 - 22.25 11.70 1.32 24.40 23.00 28.89 11.32 12.14 3.13 . 50.. - 59.00 - 25.42 11.70 1.32 27.60 24.61 31.29 14.73 15.55 3.13 P S . 50.. - 65.00 - 28.60 11.70 1.32 30.80 26.97 33.69 16.00 16.82 3.13 851 00 J 20.. P S . 50.. - 79.10 - 31.77 14.35 2.15 34.10 29.36 36.89 16.89 17.70 3.13 22 851 00 J 22.. P S . 50.. - 80.00 - 34.95 14.35 2.15 37.30 31.75 39.99 17.78 18.60 3.13 24 851 00 J 24.. P S . 50.. - 90.00 - 38.12 15.20 2.15 40.50 34.92 43.15 20.34 21.16 3.81 P S P S Embase a collerette carree avec raccord droit a presse-etoupe et serre-cables Square flange receptacle with straight sealing gland and cable clamp 00 JC Taille de boitier Shell size 8 MS 3110 J References / Part numbers contacts a souder solder contacts 851 00 JC 8.. P S .50.. P S L max G contacts a sertir crimp contacts souder solder sertir crimp - 57.68 - B max C max D max E 12.03 11.70 1.32 19.90 15.09 A F max min max 20.99 5.02 5.84 J 3.13 10 851 00 JC 10.. .50.. - 57.68 - 15.01 11.70 1.32 21.50 18.26 24.19 5.94 6.76 3.13 12 851 00 JC 12.. S .50.. - 61.24 - 19.07 11.70 1.32 25.00 20.62 26.54 9.34 10.16 3.13 14 851 00 JC 14.. PS .50.. - 66.01 - 22.25 11.70 1.32 27.80 23.00 28.89 11.32 12.14 3.13 P P S 16 851 00 JC 16.. .50.. - 74.75 - 25.42 11.70 1.32 29.40 24.61 31.29 14.73 15.55 3.13 18 851 00 JC 18.. PS .50.. - 80.57 - 28.60 11.70 1.32 35.30 26.97 33.69 16.00 16.82 3.13 20 851 00 JC 20.. PS .50.. - 91.69 - 31.77 14.35 2.15 35.30 29.36 36.89 16.89 17.70 3.13 P S 22 851 00 JC 22.. .50.. - 95.66 - 34.95 14.35 2.15 41.10 31.75 39.99 17.78 18.60 3.13 24 851 00 JC 24.. PS .50.. - 101.22 - 38.12 15.20 2.15 42.40 34.92 43.15 20.34 21.16 3.81 Note : toutes les dimensions sont en mm / all dimensions are in mm 21 851 Series Embase a fixation par ecrou avec raccord simple Jam nut receptacle with backnut HE 301 B 07 E 07 E MS 3114 E HE 301 B 07 R 07 R MS 3124 E VG 95328 D Taille de boitier Shell size References / Part numbers contacts a souder solder contacts sertir crimp A B max C max D max F max P max S max . 50 .. 34.10 33.50 12.03 17.90 2.64 18.50 26.94 19.29 23.94 26.94 8 851 07 E 8.. 10 851 07 E 10.. P S . 50.. 851 07 R 10.. P S . 50.. 34.10 33.50 15.01 17.90 2.64 21.70 30.14 22.38 12 851 07 E 12.. P S . 50.. 851 07 R 12.. P S . 50.. 34.10 33.50 19.07 17.90 2.64 24.90 34.94 27.13 31.74 14 851 07 E 14.. P S . 50.. 851 07 R 14.. P S . 50.. 34.10 33.50 22.25 17.90 2.64 28.10 38.04 30.33 34.94 16 851 07 E 16.. P S . 50.. 851 07 R 16.. P S . 50.. 34.10 33.50 25.42 17.90 2.64 31.20 41.24 33.48 38.24 18 851 07 E 18.. P S . 50.. 851 07 R 18.. P S . 50.. 34.10 33.50 28.60 17.90 2.64 34.40 44.44 36.68 41.34 20 851 07 E 20.. P S . 50.. 851 07 R 20.. P S . 50.. 39.30 37.90 31.77 22.45 3.44 38.30 49.14 39.83 46.04 22 851 07 E 22.. P S . 50.. 851 07 R 22.. P S . 50.. 39.30 37.90 34.95 22.45 3.44 41.50 52.24 43.03 49.24 851 07 E 24.. P S . 50.. 851 07 R 24.. P S . 50.. 39.30 37.90 38.12 22.30 3.44 44.70 55.54 46.18 52.74 24 P S . 50.. L max souder solder contacts a sertir crimp contacts 851 07 R 8.. P S Embase a fixation par ecrou avec raccord droit a serre-cables Jam nut receptacle with straight cable clamp HE 301 B 07 EC 07 EC MS 3114 F 07 AC HE 301 B 07 AC HE 301 B 07 RC 07 RC MS 3124 F VG 95328 E Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 07 EC AC 8.. 10 851 07 12 851 07 EC 12.. AC P S 14 851 07 EC AC 14.. P S 16 851 07 EC AC 16.. 18 851 07 P S L max contacts a sertir crimp contacts P S sertir crimp A B max C max D max F max G P max S max 49.31 49.10 12.03 17.90 2.64 19.90 26.94 3.50 19.29 23.94 26.94 . 50.. 851 07 RC 8.. P S . 50.. 851 07 RC 10.. P S . 50.. 49.31 49.10 15.01 17.90 2.64 21.50 30.14 5.00 22.38 . 50.. 851 07 RC 12.. P S . 50.. 49.17 49.10 19.07 17.90 2.64 25.00 34.94 8.20 27.13 31.74 . 50.. 851 07 RC 14.. P S . 50.. 49.17 49.10 22.25 17.90 2.64 27.80 38.04 10.00 30.33 34.94 P S . 50.. 851 07 RC 16.. P S . 50.. 52.34 52.20 25.42 17.90 2.64 29.40 41.24 13.00 33.48 38.24 18.. P S . 50.. 851 07 RC 18.. P S . 50.. 53.22 53.10 28.60 17.90 2.64 35.30 44.44 16.00 36.68 41.34 20 851 07 EC AC 20.. P S . 50.. 851 07 RC 20.. P S . 50.. 58.10 58.00 31.77 22.45 3.44 35.30 49.14 16.00 39.83 46.04 22 851 07 EC AC 22.. P S . 50.. 851 07 RC 22.. P S . 50.. 58.10 58.00 34.95 22.45 3.44 41.10 52.24 19.30 43.03 49.24 P S . 50.. 851 07 RC 24.. P S . 50.. 58.10 58.00 38.12 23.30 3.44 42.40 55.54 20.60 46.18 52.74 24 851 07 EC AC EC AC EC AC 10.. 24.. . 50 .. souder solder Note : toutes les dimensions sont en mm / all dimensions are in mm 22 851 Series Embase a fixation par ecrou avec raccord droit pour potting Jam nut receptacle with straight backshell for potting HE 301 B 07 P 07 P MS 3114 P HE 301 B 07 RP 07 RP MS 3124 P Taille de boitier Shell size References / Part numbers contacts a souder solder contacts . 50.. L max contacts a sertir crimp contacts A B max C max D max F max G max P max S max 851 07 P 8.. 34.30 39.80 12.03 17.90 2.64 15.34 26.94 10.46 19.29 23.94 10 851 07 P 10.. PS . 50.. 851 07 RP 10.. PS . 50.. 34.30 39.80 15.01 17.90 2.64 17.70 30.14 13.55 22.38 26.94 12 851 07 P 12.. PS . 50.. 851 07 RP 12.. PS . 50.. 34.30 39.80 19.07 17.90 2.64 21.69 34.94 13.96 27.13 31.74 14 851 07 P 14.. . 50.. 851 07 RP 14.. . 50.. 34.30 39.80 22.25 17.90 2.64 23.90 38.04 17.42 30.33 34.94 16 851 07 P 16.. PS . 50.. 851 07 RP 16.. P S . 50.. 34.30 39.80 25.42 17.90 2.64 27.00 41.24 20.56 33.48 38.24 18 851 07 P 18.. PS . 50.. 851 07 RP 18.. P S . 50.. 34.10 41.80 28.60 17.90 2.64 30.50 44.44 23.66 36.68 41.34 P S . 50 .. sertir crimp 8 P S 851 07 RP 8.. souder solder P S P S 20 851 07 P 20.. . 50.. 851 07 RP 20.. P S . 50.. 42.25 49.92 31.77 22.45 3.44 33.65 49.14 23.92 39.83 46.04 22 851 07 P 22.. S . 50.. 851 07 RP 22.. P S . 50.. 42.25 49.92 34.95 22.45 3.44 37.10 52.24 25.52 43.03 49.24 24 851 07 P 24.. PS . 50.. 851 07 RP 24.. P S . 50.. 43.26 51.30 38.12 23.30 3.44 40.00 55.54 32.00 46.18 52.74 P S P Embase a fixation par ecrou avec raccord droit pour gaine thermoretractable Jam nut receptacle with straight backshell for heatshrink sleeving 07 T 07 RT Taille de boitier Shell size 8 VG 95328 S References / Part numbers contacts a souder solder contacts 851 07 T 8.. P S . 50.. P S L max contacts a sertir crimp contacts 851 07 RT 8.. P S C max D max 42.60 41.50 12.03 17.90 2.64 15.35 26.94 A sertir crimp F max M max P max S max souder solder sertir crimp 7.20 6.70 3.70 19.29 23.94 22.38 26.94 10 851 07 T 10.. . 50.. 42.60 41.50 15.01 17.90 2.64 18.15 30.14 10.20 9.40 3.70 12 851 07 T 12.. P S . 50.. 851 07 RT 12.. P S . 50.. 42.60 41.50 19.07 17.90 2.64 23.45 34.94 13.20 11.95 3.70 27.13 14 851 07 T 14.. P S . 50.. 851 07 RT 14.. P S . 50.. 42.60 41.50 22.25 17.90 2.64 24.25 38.04 16.10 15.15 3.70 30.33 34.94 16 851 07 T 16.. P S . 50.. 851 07 RT 16.. P S . 50.. 44.40 43.80 25.42 17.90 2.64 29.55 41.24 19.25 18.05 3.70 33.48 38.24 18 851 07 T 18.. P S . 50.. 851 07 RT 18.. P S . 50.. 44.40 43.80 28.60 17.90 2.64 31.75 44.44 21.30 19.95 3.70 36.68 41.24 20 851 07 T 20.. P S . 50.. 851 07 RT 20.. P S . 50.. 50.90 49.80 31.77 22.45 3.44 35.85 49.14 24.40 23.05 3.70 39.83 46.04 22 851 07 T 22.. P S . 50.. 851 07 RT 22.. P S . 50.. 50.90 49.80 34.95 22.45 3.44 38.20 52.24 27.50 25.55 3.70 43.03 49.24 851 07 T 24.. P S . 50.. 851 07 RT 24.. P S . 50.. 49.90 48.50 38.12 23.30 3.44 41.30 55.54 30.60 28.65 3.70 46.18 52.74 24 . 50.. 851 07 RT 10.. . 50 .. P S G max B max souder solder Note : toutes les dimensions sont en mm / all dimensions are in mm 23 31.74 851 Series Embase a fixation par ecrou avec raccord droit demontable pour reprise de tresse et gaine thermoretractable (specifications 38 & 42) / Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 07 T 07 RT Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 07 T 8.. . 50 38 42 P S L max contacts a sertir crimp contacts 38 42 851 07 RT 8.. P S souder solder sertir crimp A B max C max D max F max G max M max P max S max . 50 38 42 60.00 12.03 17.90 2.64 18.25 26.94 7.45 3.70 19.29 23.94 851 07 RT 10.. P S . 50 38 42 60.00 15.01 17.90 2.64 20.25 30.14 9.00 3.70 22.38 26.94 851 07 RT 12.. P S . 50 38 42 60.00 19.07 17.90 2.64 24.75 34.94 13.30 3.70 27.13 31.74 851 07 RT 14.. P S 38 42 10 851 07 T 10.. P S 12 851 07 T 12.. P S . 50 38 42 14 851 07 T 14.. P S 38 42 60.00 22.25 17.90 2.64 27.75 38.04 16.50 3.70 30.33 34.94 16 851 07 T 16.. PS . 50 38 851 07 RT 16.. 42 P S . 50 38 42 60.00 25.42 17.90 2.64 30.05 41.24 18.50 3.70 33.48 38.24 18 851 07 T 18.. P S . 5038 851 07 RT 18.. 42 P S . 50 38 42 60.40 28.60 17.90 2.64 34.15 44.44 21.90 3.70 36.68 41.34 20 851 07 T 20.. P S . 50 851 07 RT 20.. P S . 50 38 42 63.40 31.77 22.45 3.44 37.25 49.14 25.10 3.70 39.83 46.04 22 851 07 T 22.. P S . 5038 851 07 RT 22.. 42 P S . 50 38 42 63.40 34.95 22.45 3.44 40.45 52.24 28.20 3.70 43.03 49.24 24 851 07 T 24.. P S . 5038 851 07 RT 24.. 42 P S . 5038 42 63.40 38.12 23.30 3.44 43.65 55.54 31.40 3.70 46.18 52.74 . 50 . 50 38 42 . 50 Embase a fixation par ecrou avec raccord droit demontable pour reprise de tresse et gaine thermoretractable / Jam nut receptacle with removable straight backshell for screen termination and heatshrink sleeving 07 G 07 RG Taille de boitier Shell size VG 95328 T References / Part numbers contacts a souder solder contacts 8 851 07 G 8.. 10 851 07 G 10.. P S P S . 50 L max contacts a sertir crimp contacts 851 07 RG 8.. P S . 50 . 50 A B max 62.20 12.03 17.90 62.20 15.01 17.90 souder solder sertir crimp C max D max F max G max 2.64 16.30 26.94 7.45 2.64 18.30 30.14 10.30 M max P max S max 3.60 19.29 23.94 3.60 22.38 26.94 . 50 851 07 RG 10.. P S . 50 851 07 RG 12.. P S . 50 62.20 19.07 17.90 2.64 22.30 34.94 13.20 3.60 27.13 31.74 . 50 851 07 RG 14.. P S . 50 62.40 22.25 17.90 2.64 25.30 38.04 16.50 3.60 30.33 34.94 17.90 2.64 28.30 41.24 19.35 3.60 33.48 38.24 12 851 07 G 12.. P S 14 851 07 G 14.. P S 16 851 07 G 16.. P S . 50 851 07 RG 16.. P S . 50 62.40 25.42 18 851 07 G 18.. P S . 50 851 07 RG 18.. P S . 50 62.40 28.60 17.90 2.64 32.30 44.44 21.60 3.60 36.68 41.34 20 851 07 G 20.. P S . 50 851 07 RG 20.. P S . 50 67.50 31.77 22.45 3.44 34.30 49.14 24.80 3.60 39.83 46.04 22 851 07 G 22.. P S . 50 851 07 RG 22.. P S . 50 67.50 34.95 22.45 3.44 38.30 52.24 27.90 3.60 43.03 49.24 24 851 07 G 24.. P S . 50 851 07 RG 24.. P S . 50 67.50 38.12 23.30 3.44 41.30 55.54 31.00 3.60 46.18 52.74 Note : toutes les dimensions sont en mm / all dimensions are in mm 24 851 Series Embase a collerette carree sans possibilite de raccord Square flange receptacle not accepting backshell HE 301 B 02 E 02 E MS 3112 E VG 95328 H HE 301 B 02 R 02 R MS 3122 E VG 95328 C Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S 8 851 02 E 8.. 10 851 02 E 10.. 12 851 02 E 12.. 14 851 02 E 14.. . 50.. L max contacts a sertir crimp contacts P S . 50 .. sertir crimp A B max C max D max E F max J 3.13 25.18 32.35 12.03 11.70 1.32 10.84 15.09 20.99 . 50.. 851 02 R 10.. PS . 50.. 25.10 32.35 15.01 11.70 1.32 13.99 18.26 24.19 3.13 P S . 50.. 851 02 R 12.. PS . 50.. 25.10 32.35 19.07 11.70 1.32 17.37 20.62 26.54 3.13 P S . 50.. 851 02 R 14.. PS . 50.. 25.10 32.35 22.25 11.70 1.32 20.57 23.00 28.89 3.13 P S 851 02 R 8.. souder solder 16 851 02 E 16.. P S . 50.. 851 02 R 16.. P S . 50.. 25.10 32.35 25.42 11.70 1.32 23.72 24.61 31.29 3.13 18 851 02 E 18.. P S . 50.. 851 02 R 18.. P S . 50.. 25.10 32.35 28.60 11.70 1.32 26.69 26.97 33.69 3.13 20 851 02 E 20.. P S . 50.. 851 02 R 20.. P S . 50.. 26.67 33.95 31.77 14.35 2.15 29.89 29.36 36.89 3.13 22 851 02 E 22.. P S . 50.. 851 02 R 22.. P S . 50.. 26.67 33.95 34.95 14.35 2.15 33.04 31.75 39.99 3.13 24 851 02 E 24.. P S . 50.. 851 02 R 24.. P S . 50.. 26.67 33.95 38.12 15.20 2.15 36.24 34.92 43.15 3.81 Embase a fixation par ecrou sans possibilite de raccord Jam nut receptacle not accepting backshell 07 A Taille de boitier Shell size HE 301 B 07 A References / Part numbers contacts a souder solder contacts P S 8 851 07 A 8.. 10 851 07 A 10.. 12 851 07 A 12.. 14 16 . 50.. L max contacts a sertir crimp contacts souder solder sertir crimp A B max C max F max P max S max - 25.18 - 12.03 17.90 2.64 26.94 19.29 23.94 . 50.. - 25.10 - 15.01 17.90 2.64 30.14 22.38 26.94 P S . 50.. - 25.10 - 19.07 17.90 2.64 34.94 27.13 31.74 851 07 A 14.. P S . 50.. - 25.10 - 22.25 17.90 2.64 38.04 30.33 34.94 851 07 A 16.. P S . 50.. - 25.10 - 25.42 17.90 2.64 41.24 33.48 38.24 P S 18 851 07 A 18.. P S . 50.. - 25.10 - 28.60 17.90 2.64 44.44 36.68 41.34 20 851 07 A 20.. P S . 50.. - 26.67 - 31.77 22.45 3.44 49.14 39.83 46.04 22 851 07 A 22.. P S . 50.. - 26.67 - 34.95 22.45 3.44 52.24 43.03 49.24 851 07 A 24.. P S . 50.. - 26.67 - 38.12 23.30 3.44 55.54 46.18 52.74 24 Note : toutes les dimensions sont en mm / all dimensions are in mm 25 851 Series Prolongateur avec raccord simple Cable connecting receptacle with backnut HE 301 B 01 E 01 E MS 3111 E HE 301 B 01 R 01 R MS 3121 E Taille de boitier Shell size 8 10 References / Part numbers contacts a souder solder contacts P S 851 01 E 8.. 851 01 E 10.. L max sertir crimp A B max C max . 50.. 32.70 32.00 12.03 10.60 P S . 50.. 32.70 32.00 15.01 10.60 . 50.. 32.70 32.00 19.07 . 50.. 32.70 32.00 22.25 32.70 32.00 P S . 50.. 851 01 R 8.. P S 851 01 R 10.. . 50.. souder solder contacts a sertir crimp contacts . 50.. 851 01 R 12.. P S . 50.. 851 01 R 14.. P S 12 851 01 E 12.. P S 14 851 01 E 14.. P S 16 851 01 E 16.. P S . 50.. 851 01 R 16.. P S . 50.. D max F max P max 2.10 13.50 24.24 20.99 2.10 16.70 27.44 24.19 10.60 2.10 19.90 29.79 26.54 10.60 2.10 23.40 32.10 28.89 25.42 10.60 2.10 26.60 34.59 31.29 33.69 18 851 01 E 18.. P S . 50.. 851 01 R 18.. P S . 50.. 32.70 32.00 28.60 10.60 2.10 29.50 36.94 20 851 01 E 20.. P S . 50.. 851 01 R 20.. P S . 50.. 34.50 33.40 31.77 13.85 2.65 32.70 40.14 36.89 22 851 01 E 22.. P S . 50.. 851 01 R 22.. P S . 50.. 34.50 33.40 34.95 13.85 2.65 36.00 43.24 40.00 24 851 01 E 24.. P S . 50.. 851 01 R 24.. P S . 50.. 34.50 33.40 38.12 14.70 2.65 39.10 46.44 43.29 Prolongateur avec raccord droit a serre-cables Cable connecting receptacle with straight cable clamp HE 301 B 01 EC 01 EC MS 3111 F 01 AC HE 301 B 01 AC HE 301 B 01 RC 01 RC MS 3121 F Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 01 EC AC 8.. EC AC P S 10 851 01 12 851 01 EC AC 12.. EC AC 10.. P S P S 851 01 RC 8.. P S . 50 .. sertir crimp A B max C max D max F max G P max 48.00 47.30 12.03 10.60 2.10 19.90 24.24 3.50 20.99 . 50.. 48.00 47.30 15.01 10.60 2.10 21.50 27.44 5.00 24.19 P S . 50.. 48.00 47.30 19.07 10.60 2.10 25.00 29.79 8.20 26.54 851 01 RC 14.. P S . 50.. 48.00 47.30 22.25 10.60 2.10 27.80 32.10 10.00 28.89 851 01 RC 16.. P S . 50.. 51.00 50.50 25.42 10.60 2.10 29.40 34.59 13.00 31.29 28.60 10.60 2.10 35.30 36.94 16.00 33.69 . 50.. 851 01 RC 10.. P S . 50.. 851 01 RC 12.. 851 01 16 P 851 01 EC AC 16.. S . 50.. 18 851 01 EC AC 18.. P S . 50.. 851 01 RC 18.. P S . 50.. 51.00 50.50 20 851 01 EC AC 20.. P S . 50.. 851 01 RC 20.. P S . 50.. 53.00 51.50 31.77 13.85 2.65 35.30 40.14 16.00 36.89 . 50.. 851 01 RC 22.. P S . 50.. 53.00 51.50 34.95 13.85 2.65 41.10 43.24 19.30 40.00 . 50.. 851 01 RC 24.. P S . 50.. 53.00 51.50 38.12 14.70 2.65 42.40 46.44 20.60 43.29 22 851 01 22.. P S 24 851 01 EC AC 24.. P S . 50.. souder solder 14 EC AC 14.. . 50.. P S L max contacts a sertir crimp contacts Note : toutes les dimensions sont en mm / all dimensions are in mm 26 851 Series Prolongateur avec raccord droit pour potting Cable connecting receptacle with straight backshell for potting HE 301 B 01 P 01 P MS 3111 P HE 301 B 01 RP 01 RP MS 3121 P Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S 8 851 01 P 8.. . 50.. 10 851 01 P 10.. 12 851 01 P 12.. P S 14 851 01 P 14.. P S 16 851 01 P 16.. 18 20 L max contacts a sertir crimp contacts 851 01 RP 8.. P S A B max C max D max F max G max P max 36.20 41.70 12.03 10.60 2.10 15.34 24.24 10.46 20.99 36.20 41.70 15.01 10.60 2.10 17.70 27.44 13.55 24.19 P S . 50.. 36.20 41.70 19.07 10.60 2.10 21.69 29.79 13.96 26.54 P S . 50.. 36.20 41.70 22.25 10.60 2.10 23.90 32.10 17.42 28.89 P S . 50.. 36.20 41.70 25.42 10.60 2.10 27.00 34.59 20.56 31.29 851 01 RP 18.. P S . 50.. 36.91 44.46 28.60 10.60 2.10 30.50 36.94 23.66 33.69 . 50.. 851 01 RP 20.. P S . 50.. 43.80 50.93 31.77 13.85 2.65 33.65 40.15 23.92 36.89 . 50.. 851 01 RP 22.. P S . 50.. 43.80 50.93 34.95 13.85 2.65 37.10 42.24 25.52 40.00 . 50.. 851 01 RP 24.. P S . 50.. 43.80 50.93 38.12 14.70 2.65 40.00 46.44 32.00 43.29 851 01 RP 10.. . 50.. 851 01 RP 12.. . 50.. 851 01 RP 14.. P S . 50.. 851 01 RP 16.. 851 01 P 18.. P S . 50.. 851 01 P 20.. P S 22 851 01 P 22.. P S 24 851 01 P 24.. P S . 50 .. sertir crimp . 50.. . 50.. P S souder solder P S Prolongateur avec raccord droit intermediaire Cable connecting receptacle with straight adaptor 01 A 01 RA Taille de boitier Shell size 8 HE 301 B 01 A HE 301 B 01 RA References / Part numbers contacts a souder solder contacts 851 01 A 8.. P S . 50.. P S L max contacts a sertir crimp contacts 851 01 RA 8.. P S . 50 .. P S souder solder K sertir crimp 41.00 A B max C max D max F max G max filetage threading 12.03 10.60 2.10 14.50 24.24 9.10 1/2 28 20.99 UNEF 2A P max 10 851 01 A 10.. . 50.. 851 01 RA 10.. . 50.. 41.00 15.01 10.60 2.10 18.70 27.44 12.08 5/8 24 24.19 12 851 01 A 12.. P S . 50.. 851 01 RA 12.. P S . 50.. 41.00 19.07 10.60 2.10 21.70 29.79 15.25 3/4 20 26.54 14 851 01 A 14.. P S . 50.. 851 01 RA 14.. P S . 50.. 41.00 22.25 10.60 2.10 25.10 32.10 18.15 7/8 20 28.89 16 851 01 A 16.. P S . 50.. 851 01 RA 16.. P S . 50.. 41.00 25.42 10.60 2.10 28.13 34.59 21.32 1-20 31.29 18 851 01 A 18.. P S . 50.. 851 01 RA 18.. P S . 50.. 41.00 28.60 10.60 2.10 31.38 36.94 24.32 1-3/16 18 33.69 20 851 01 A 20.. P S . 50.. 851 01 RA 20.. P S . 50.. 44.00 31.77 13.85 2.65 34.30 40.15 26.73 1-3/16 18 36.89 22 851 01 A 22.. P S . 50.. 851 01 RA 22.. P S . 50.. 44.00 34.95 13.85 2.65 37.60 42.24 30.67 1-7/16 18 40.00 24 851 01 A 24.. P S . 50.. 851 01 RA 24.. P S . 50.. 44.00 38.12 14.70 2.65 40.70 46.44 33.08 1-7/16 18 43.29 Note : toutes les dimensions sont en mm / all dimensions are in mm 27 851 Series Prolongateur avec raccord droit pour gaine thermoretractable Cable connecting receptacle with straight backshell for heatshrink sleeving 01 T 01 RT Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 01 T 8.. P S .50.. L max contacts a sertir crimp contacts P S A B max C max D max F max souder solder sertir crimp P max M max 36.70 36.00 12.03 10.60 2.10 15.35 24.24 7.20 6.70 20.99 3.70 851 01 T 10.. .50.. 851 01 RT 10.. S .50.. 36.70 36.00 15.01 10.60 2.10 18.15 27.44 10.20 9.40 24.19 3.70 12 851 01 T 12.. PS .50.. 851 01 RT 12.. PS .50.. 36.70 36.00 19.07 10.60 2.10 23.45 29.70 13.20 11.95 26.54 3.70 P S .50.. G max sertir crimp 10 P S 851 01 RT 8.. souder solder P P S 14 851 01 T 14.. .50.. 851 01 RT 14.. .50.. 36.70 36.00 22.25 10.60 2.10 24.25 32.10 16.10 15.15 28.89 3.70 16 851 01 T 16.. PS .50.. 851 01 RT 16.. PS .50.. 39.00 38.30 25.42 10.60 2.10 29.55 34.59 19.25 18.05 31.29 3.70 18 851 01 T 18.. PS .50.. 851 01 RT 18.. PS .50.. 39.00 38.30 28.60 10.60 2.10 31.75 36.94 21.30 19.95 33.69 3.70 P S P S 20 851 01 T 20.. .50.. 851 01 RT 20.. .50.. 45.30 44.20 31.77 13.85 2.65 35.85 40.15 24.40 23.05 36.89 3.70 22 851 01 T 22.. PS .50.. 851 01 RT 22.. PS .50.. 45.30 44.20 34.95 13.85 2.65 38.20 42.24 27.50 25.55 40.00 3.70 24 851 01 T 24.. PS .50.. 851 01 RT 24.. PS .50.. 44.00 42.60 14.70 2.65 41.30 46.44 30.60 28.65 43.29 3.70 38.12 Prolongateur avec raccord droit demontable pour gaine thermoretractable Cable connecting receptacle with removable straight backshell for heatshrink sleeving 01 M 01 RM Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S P S .50 .. sertir crimp 50.00 A B max C max D max F max G max P max M max 12.03 10.60 2.10 13.55 24.24 7.05 20.99 3.50 3.50 851 01 M 8.. 10 851 01 M 10.. P S .50.. 851 01 RM 10.. P S .50.. 50.00 15.01 10.60 2.10 15.35 27.44 9.90 24.19 12 851 01 M 12.. P S .50.. 851 01 RM 12.. P S .50.. 50.00 19.07 10.60 2.10 19.48 29.79 12.60 26.54 3.50 14 851 01 M 14.. P S .50.. 851 01 RM 14.. P S .50.. 50.00 22.25 10.60 2.10 21.30 32.10 15.90 28.89 3.50 16 851 01 M 16.. P S .50.. 851 01 RM 16.. PS .50.. 50.00 25.42 10.60 2.10 24.50 34.59 18.95 31.29 3.50 18 851 01 M 18.. P S .50.. 851 01 RM 18.. P S .50.. 50.00 28.60 10.60 2.10 26.45 36.94 20.90 33.69 3.50 20 851 01 M 20.. P S .50.. 851 01 RM 20.. P S .50.. 53.30 31.77 13.85 2.65 30.75 40.15 23.70 36.89 3.50 22 851 01 M 22.. P S .50.. 851 01 RM 22.. P S .50.. 53.30 34.95 13.85 2.65 34.24 42.24 26.60 40.00 3.50 851 01 M 24.. P S 851 01 RM 24.. P S .50.. 53.30 38.12 14.70 2.65 36.47 46.44 29.30 43.29 3.50 .50.. 851 01 RM 8.. souder solder 8 24 .50.. L max contacts a sertir crimp contacts Note : toutes les dimensions sont en mm / all dimensions are in mm 28 851 Series Prolongateur avec raccord droit demontable pour reprise de tresse et gaine thermoretractable (specifications 38 & 42) / Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 01 T 01 RT Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 01 T 8.. 10 851 01 T 10.. 12 851 01 T 12.. P S 14 851 01 T 14.. P S 16 851 01 T 16.. P S .50 contacts a sertir crimp contacts .50 38 42 P S P S L max 851 01 RT 8.. .50 38 42 P S .50 38 851 01 RT 10.. 42 .50 38 42 .50 38 42 P S sertir crimp A B max C max D max F max G max M max P max 51.60 12.03 10.60 2.10 18.25 24.24 7.45 3.70 20.99 .50 38 42 51.60 15.01 10.60 2.10 20.25 27.44 9.00 3.70 24.19 851 01 RT 12.. P S .50 38 42 51.60 19.07 10.60 2.10 24.75 29.79 13.30 3.70 26.54 851 01 RT 14.. P S .50 38 42 51.60 22.25 10.60 2.10 27.75 32.10 16.50 3.70 28.89 P S .50 38 42 51.60 25.42 10.60 2.10 30.05 34.59 18.50 3.70 31.29 .50 38 42 .50 38 851 01 RT 16.. 42 38 42 souder solder 18 851 01 T 18.. P S 851 01 RT 18.. P S 52.00 28.60 10.60 2.10 34.15 36.94 21.90 3.70 33.69 20 851 01 T 20.. P S .50 38 851 01 RT 20.. 42 P S .50 38 42 55.10 31.77 13.85 2.65 37.25 40.15 25.10 3.70 36.89 22 851 01 T 22.. P S .50 42 851 01 RT 22.. 38 P S .50 42 38 55.10 34.95 13.85 2.65 40.45 42.24 28.20 3.70 40.00 851 01 T 24.. P S 38 42 P S 38 42 55.10 38.12 14.70 2.65 43.65 46.44 31.40 3.70 43.29 24 .50 851 01 RT 24.. .50 Prolongateur avec raccord droit demontable pour reprise de tresse et gaine thermoretractable / Cable connecting receptacle with removable straight backshell for screen termination and heatshrink sleeving 01 G 01 RG Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 01 G 8.. P S . 50.. P S L max contacts a sertir crimp contacts 851 01 RG 8.. P S sertir crimp . 50 .. 54.00 P S A B max C max D max F max G max M max P max 12.03 10.60 2.10 16.30 24.24 7.45 3.60 20.99 10 851 01 G 10.. . 50.. 54.00 15.01 10.60 2.10 18.30 27.44 10.30 3.60 24.19 12 851 01 G 12.. P S . 50.. 851 01 RG 12.. P S . 50.. 54.00 19.07 10.60 2.10 22.30 29.79 13.20 3.60 26.54 14 851 01 G 14.. P S . 50.. 851 01 RG 14.. P S . 50.. 54.00 22.25 10.60 2.10 25.30 32.10 16.50 3.60 28.89 16 851 01 G 16.. P S . 50.. 851 01 RG 16.. P S . 50.. 54.00 25.42 10.60 2.10 28.30 34.59 19.35 3.60 31.29 18 851 01 G 18.. P S . 50.. 851 01 RG 18.. P S . 50.. 54.00 28.60 10.60 2.10 32.30 36.94 21.60 3.60 33.69 20 851 01 G 20.. P S . 50.. 851 01 RG 20.. P S . 50.. 59.30 31.77 13.85 2.65 34.30 40.15 24.80 3.60 36.89 851 01 G 22.. P S . 50.. 851 01 RG 22.. P S . 50.. 59.30 34.95 13.85 2.65 38.30 42.24 27.90 3.60 40.00 851 01 G 24.. P S . 50.. 851 01 RG 24.. P S . 50.. 59.30 38.12 14.70 2.65 41.30 46.44 31.00 3.60 43.29 22 24 . 50.. 851 01 RG 10.. souder solder Note : toutes les dimensions sont en mm / all dimensions are in mm 29 851 Series Prolongateur avec raccord droit a presse-etoupe Cable connecting receptacle with straight sealing gland backshell 01 J Taille de boitier Shell size HE 301 B 01 J References / Part numbers L max G B max C max D max F max contacts a sertir crimp contacts souder solder sertir crimp A . 50.. - 47.60 - 12.03 10.60 2.10 14.40 P S . 50.. - 47.60 - 15.01 10.60 2.10 17.60 contacts a souder solder contacts P S P max min max 24.24 5.02 5.84 20.99 27.44 5.94 6.76 24.19 29.79 9.34 10.16 26.54 28.89 8 851 01 J 8.. 10 851 01 J 10.. 12 851 01 J 12.. P S . 50.. - 48.70 - 19.07 10.60 2.10 21.10 14 851 01 J 14.. P S . 50.. - 53.50 - 22.25 10.60 2.10 24.40 32.10 11.32 12.14 16 851 01 J 16.. P S . 50.. - 59.00 - 25.42 10.60 2.10 27.60 34.59 14.73 15.55 31.29 18 851 01 J 18.. P S . 50.. - 65.00 - 28.60 10.60 2.10 30.80 36.94 16.00 16.82 33.69 20 851 01 J 20.. P S . 50.. - 79.10 - 31.77 13.85 2.65 34.10 40.15 16.89 17.71 36.89 22 851 01 J 22.. P S . 50.. - 80.00 - 34.95 13.85 2.65 37.30 42.24 17.78 18.60 40.00 24 851 01 J 24.. P S . 50.. - 90.00 - 38.12 14.70 2.65 40.50 46.44 20.34 21.16 43.29 Prolongateur avec raccord droit a presse-etoupe et serre-cables Cable connecting receptacle with straight sealing gland and cable clamp backshell 01 JC Taille de boitier Shell size MS 3111 J References / Part numbers contacts a souder solder contacts P S .50.. L max G B max C max D max F max contacts a sertir crimp contacts souder solder sertir crimp A - 57.68 - 12.03 10.60 2.10 19.90 - 57.68 - 15.01 10.60 2.10 21.50 - 19.07 10.60 2.10 P max min max 24.24 5.02 5.84 20.99 27.44 5.94 6.76 24.19 25.00 29.79 9.34 10.16 26.54 28.89 8 851 01 JC 8.. 10 851 01 JC 10.. PS .50.. 12 851 01 JC 12.. P S .50.. - 61.24 14 851 01 JC 14.. P S .50.. - 66.01 - 22.25 10.60 2.10 27.80 32.10 11.32 12.14 16 851 01 JC 16.. S .50.. - 74.75 - 25.42 10.60 2.10 29.40 34.59 14.73 15.50 31.29 18 851 01 JC 18.. PS .50.. - 80.57 - 28.60 10.60 2.10 35.30 36.94 16.00 16.82 33.69 20 851 01 JC 20.. PS .50.. - 91.69 - 31.77 13.85 2.65 35.30 40.15 16.89 17.71 36.89 P P S - 95.66 - 34.95 13.85 2.65 41.10 42.24 17.78 18.60 40.00 P - 101.22 - 38.12 14.70 2.65 42.40 46.44 20.34 21.16 43.29 22 851 01 JC 22.. .50.. 24 851 01 JC 24.. S .50.. Note : toutes les dimensions sont en mm / all dimensions are in mm 30 851 Series Fiche avec raccord simple Plug with backnut HE 301 B 06 E 06 E MS 3116 E HE 301 B 06 R 06 R MS 3126 E Taille de boitier Shell size References / Part numbers contacts a souder solder contacts P S 8 851 06 E 8 .. . 50.. 10 851 06 E 10 .. 12 851 06 E 12 .. P S 14 851 06 E 14 .. P S 16 851 06 E 16 .. P S 18 851 06 E 18 .. P S 20 851 06 E 20 .. P S 22 851 06 E 22 .. P S 24 851 06 E 24 .. P S P S L max contacts a sertir crimp contacts 851 06 R 8 .. P S souder solder . 50 .. A max sertir crimp D max 32.54 32.00 19.05 13.50 . 50.. 32.54 32.00 21.80 16.70 P S . 50.. 32.54 32.00 26.15 19.90 P S . 50.. 32.54 32.00 29.35 23.40 . 50.. 32.54 32.00 32.50 26.60 P S . 50.. 32.54 32.00 35.30 29.60 851 06 R 20 .. P S . 50.. 33.30 32.10 38.85 32.70 851 06 R 22 .. P S . 50.. 33.30 32.10 42.05 36.00 851 06 R 24 .. P S . 50.. 33.30 32.10 45.10 39.10 . 50.. 851 06 R 10 .. . 50.. 851 06 R 12 .. . 50.. 851 06 R 14 .. . 50.. 851 06 R 16 .. P S . 50.. 851 06 R 18 .. . 50.. . 50.. . 50.. P S Fiche avec raccord droit a serre-cables Plug with straight cable clamp HE 301 B 06 EC 06 EC MS 3116 F 06 AC HE 301 B 06 AC HE 301 B 06 RC 06 RC MS 3126 F VG 95328 K Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 06 EC AC 8 .. EC AC . 50.. P S 10 .. P S L max contacts a sertir crimp contacts 851 06 RC 8 .. A max D max G 47.30 19.05 19.90 3.50 souder solder sertir crimp . 50 .. 48.00 P S P S 10 851 06 . 50.. 851 06 RC 10 .. . 50.. 48.00 47.30 21.80 21.50 5.00 12 851 06 EC AC 12 .. P S . 50.. 851 06 RC 12 .. P S . 50.. 48.00 47.30 26.15 25.00 8.20 14 851 06 EC AC 14 .. P S . 50.. 851 06 RC 14 .. P S . 50.. 48.00 47.30 29.35 27.80 10.00 16 851 06 EC AC 16 .. P S . 50.. 851 06 RC 16 .. P S . 50.. 51.00 50.50 32.50 29.40 13.00 18 851 06 18 .. P S . 50.. 851 06 RC 18 .. P S . 50.. 51.00 50.50 35.30 35.30 16.00 20 851 06 EC AC 20 .. P S . 50.. 851 06 RC 20 .. P S . 50.. 52.00 50.20 38.85 35.30 16.00 22 851 06 EC AC 22 .. P S . 50.. 851 06 RC 22 .. P S . 50.. 52.00 50.20 42.05 41.10 19.30 851 06 RC 24 .. P S . 50.. 52.00 50.20 45.10 42.40 20.60 24 851 06 EC AC EC AC 24 .. P S . 50.. Note : toutes les dimensions sont en mm / all dimensions are in mm 31 851 Series Fiche avec raccord droit pour potting Plug with straight backshell for potting HE 301 B 06 P 06 P MS 3116 P HE 301 B 06 RP 06 RP MS 3126 P Taille de boitier Shell size 8 References / Part numbers contacts a souder solder contacts 851 06 P 8 .. P S L max contacts a sertir crimp contacts P S . 50.. 851 06 RP 8 .. P S . 50.. 851 06 RP 10 .. A max D max G 42.10 19.05 15.34 10.46 42.10 21.80 17.70 13.55 13.96 souder solder sertir crimp . 50 .. 36.20 P S . 50.. 36.20 10 851 06 P 10 .. 12 851 06 P 12 .. P S . 50.. 851 06 RP 12 .. P S . 50.. 36.20 42.10 26.15 21.69 14 851 06 P 14 .. P S . 50.. 851 06 RP 14 .. P S . 50.. 36.20 42.10 29.35 23.90 17.42 16 851 06 P 16 .. P S . 50.. 851 06 RP 16 .. P S . 50.. 36.20 42.10 32.50 27.00 20.56 18 851 06 P 18 .. P S . 50.. 851 06 RP 18 .. P S . 50.. 37.70 45.40 35.30 30.50 23.66 20 851 06 P 20 .. P S . 50.. 851 06 RP 20 .. P S . 50.. 42.40 50.00 38.85 33.65 23.92 22 851 06 P 22 .. P S . 50.. 851 06 RP 22 .. P S . 50.. 42.40 50.00 42.05 37.10 25.52 24 851 06 P 24 .. P S . 50.. 851 06 RP 24 .. P S . 50.. 42.85 50.00 45.10 40.00 32.00 Fiche avec raccord droit intermediaire Plug with straight adaptor 06 A 06 RA Taille de boitier Shell size HE 301 B 06 A HE 301 B 06 RA References / Part numbers contacts a sertir crimp contacts contacts a souder solder contacts 8 851 06 A 8 .. 10 P S F L max P S A max D max G max filetage threading souder solder sertir crimp . 50 .. 41.00 41.00 19.05 14.50 9.10 1/2 28 . 50.. 41.00 41.00 21.80 18.70 12.08 5/8 24 UNEF 2A . 50.. 851 06 RA 8 .. 851 06 A 10 .. P S 851 06 RA 10 .. P S 12 851 06 A 12 .. P S . 50.. 851 06 RA 12 .. P S . 50.. 41.00 41.00 26.15 21.70 15.25 3/4 20 14 851 06 A 14 .. P S . 50.. 851 06 RA 14 .. P S . 50.. 41.00 41.00 29.35 25.10 18.15 7/8 20 16 851 06 A 16 .. P S . 50.. 851 06 RA 16 .. P S . 50.. 41.00 41.00 32.50 28.13 21.32 1-20 . 50.. 18 851 06 A 18 .. P S . 50.. 851 06 RA 18 .. P S . 50.. 41.00 41.00 35.30 31.38 24.32 1-3/16 18 20 851 06 A 20 .. P S . 50.. 851 06 RA 20 .. P S . 50.. 44.00 43.30 38.85 34.30 26.73 1-3/16 18 22 851 06 A 22 .. P S . 50.. 851 06 RA 22 .. P S . 50.. 44.00 43.30 42.05 37.60 30.67 1-7/16 18 24 851 06 A 24 .. P S . 50.. 851 06 RA 24 .. P S . 50.. 44.00 43.50 45.10 40.70 33.08 1-7/16 18 Note : toutes les dimensions sont en mm / all dimensions are in mm 32 851 Series Fiche avec raccord droit pour gaine thermoretractable Plug with straight backshell for heatshrink sleeving 06 T 06 RT Taille de boitier Shell size VG 95328 J References / Part numbers contacts a souder solder contacts . 50.. L max contacts a sertir crimp contacts 8 851 06 T 8.. 10 851 06 T 10.. PS . 50.. 851 06 RT 10.. 12 851 06 T 12.. PS . 50.. 851 06 RT 12.. P S P S 851 06 RT 8.. . 50 .. G max souder solder sertir crimp A max D max souder solder sertir crimp M max 36.70 36.00 19.05 15.35 7.20 6.70 3.70 . 50.. 36.70 36.00 21.80 18.15 10.20 9.40 3.70 P S . 50.. 36.70 36.00 26.15 23.45 13.20 11.95 3.70 P S P S P S 14 851 06 T 14.. . 50.. 851 06 RT 14.. . 50.. 36.70 36.00 29.35 24.25 16.10 15.15 3.70 16 851 06 T 16.. P S . 50.. 851 06 RT 16.. P S . 50.. 39.00 38.30 32.50 29.55 19.25 18.05 3.70 18 851 06 T 18.. P S . 50.. 851 06 RT 18.. P S . 50.. 39.00 38.30 35.30 31.75 21.30 19.95 3.70 20 851 06 T 20.. P S . 50.. 851 06 RT 20.. P S . 50.. 44.00 42.90 38.85 35.85 24.40 23.05 3.70 22 851 06 T 22.. P S . 50.. 851 06 RT 22.. P S . 50.. 44.00 42.90 42.05 38.20 27.50 25.55 3.70 24 851 06 T 24.. P S . 50.. 851 06 RT 24.. P S . 50.. 42.70 41.60 45.10 41.30 30.60 28.65 3.70 Fiche avec raccord droit demontable pour gaine thermoretractable Plug with removable straight backshell for heatshrink sleeving 06 M 06 RM Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 06 M 8 .. 10 851 06 M 10 .. P S . 50.. P S . 50.. L max contacts a sertir crimp contacts 851 06 RM 8 .. sertir crimp A max D max G max M max . 50 .. 50.00 19.05 13.55 7.05 3.50 P S . 50.. 50.00 21.80 15.35 9.90 3.50 . 50.. 50.00 26.15 19.48 12.60 3.50 . 50.. 50.00 29.35 21.30 15.90 3.50 3.50 P S 851 06 RM 10 .. souder solder . 50.. 851 06 RM 12 .. P S . 50.. 851 06 RM 14 .. P S 12 851 06 M 12 .. P S 14 851 06 M 14 .. P S 16 851 06 M 16 .. P S . 50.. 851 06 RM 16 .. P S . 50.. 50.00 32.50 24.50 18.95 18 851 06 M 18 .. P S . 50.. 851 06 RM 18 .. P S . 50.. 50.00 35.30 26.45 20.90 3.50 20 851 06 M 20 .. P S . 50.. 851 06 RM 20 .. P S . 50.. 52.00 38.85 30.73 23.70 3.50 22 851 06 M 22 .. P S . 50.. 851 06 RM 22 .. P S . 50.. 52.00 42.05 34.24 26.60 3.50 851 06 M 24 .. P S 851 06 RM 24 .. P S . 50.. 52.00 45.10 36.47 29.30 3.50 24 . 50.. Note : toutes les dimensions sont en mm / all dimensions are in mm 33 851 Series Fiche avec raccord droit a presse-etoupe Plug with straight sealing gland backshell 06 J Taille de boitier Shell size HE 301 B 06 J References / Part numbers L max G max A max D max min max - 19.05 14.40 5.02 5.84 - 21.80 17.60 5.94 6.76 9.34 10.16 contacts a souder solder contacts contacts a sertir crimp contacts souder solder sertir crimp P S . 50.. - 47.60 P S . 50.. - 47.60 8 851 06 J 8 .. 10 851 06 J 10 .. 12 851 06 J 12 .. P S . 50.. - 49.20 - 26.15 21.10 14 851 06 J 14 .. P S . 50.. - 54.00 - 29.35 24.40 11.32 12.14 16 851 06 J 16 .. PS . 50.. - 59.60 - 32.50 27.60 14.73 15.55 18 851 06 J 18 .. PS . 50.. - 65.60 - 35.30 30.80 16.00 16.80 20 851 06 J 20 .. PS . 50.. - 78.00 - 38.85 34.10 16.89 17.71 P S 22 851 06 J 22 .. . 50.. - 79.50 - 42.05 37.30 17.78 18.60 24 851 06 J 24 .. PS . 50.. - 90.00 - 45.10 40.50 20.34 21.16 Fiche avec raccord droit a presse-etoupe et serre-cables Plug with straight sealing gland and cable clamp backshells 06 JC Taille de boitier Shell size MS 3116 J References / Part numbers contacts a souder solder contacts P S 8 851 06 JC 8 .. 10 851 06 JC 10 .. P S . 50.. 12 14 L max G max contacts a sertir crimp contacts souder solder sertir crimp A max D max min max - 57.68 - 19.05 19.90 5.02 5.84 . 50.. - 57.68 - 21.80 21.50 5.94 6.76 851 06 JC 12 .. P S . 50.. - 61.24 - 26.15 25.00 9.34 10.16 851 06 JC 14 .. P S . 50.. - 66.01 - 29.35 27.80 11.32 12.14 16 851 06 JC 16 .. P S . 50.. - 74.75 - 32.50 29.40 14.73 15.50 18 851 06 JC 18 .. P S . 50.. - 80.57 - 35.30 35.30 16.00 16.82 20 851 06 JC 20 .. P S . 50.. - 91.69 - 38.85 35.30 16.89 17.71 22 851 06 JC 22 .. P S . 50.. - 95.66 - 42.05 41.10 17.78 18.60 24 851 06 JC 24 .. P S . 50.. - 101.22 - 45.10 42.40 20.34 21.16 Note : toutes les dimensions sont en mm / all dimensions are in mm 34 851 Series Fiche avec raccord coude a serre-cables Plug with elbow cable clamp backshell 08 EC HE 301 B 08 EC 08 RC HE 301 B 08 RC Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 08 EC 8 .. . 50.. 10 851 08 EC 10 .. 12 851 08 EC 12 .. P S 14 851 08 EC 14 .. P S 16 851 08 EC 16 .. P S 18 851 08 EC 18 .. P S 20 851 08 EC 20 .. P S 22 851 08 EC 22 .. P S 24 851 08 EC 24 .. P S P S P S L max contacts a sertir crimp contacts 851 08 RC 8 .. souder solder . 50.. sertir crimp A max D max G R max 50.10 19.05 19.70 3.50 16.00 . 50.. 52.60 21.80 21.20 5.00 18.00 P S . 50.. 54.90 26.15 24.20 8.20 19.50 P S . 50.. 58.50 29.35 27.50 10.00 22.00 . 50.. 60.80 32.50 29.10 13.00 23.50 P S . 50.. 65.00 35.30 35.70 16.00 25.00 851 08 RC 20 .. P S . 50.. 69.10 38.85 35.70 16.00 26.50 851 08 RC 22 .. P S . 50.. 71.00 42.05 39.70 19.30 28.00 851 08 EC 24 .. P S . 50.. 75.50 45.10 43.50 20.60 31.00 A max G max R max S max 40.70 19.05 8.10 11.70 11.30 14.50 P S . 50.. 851 08 RC 10 .. . 50.. 851 08 RC 12 .. . 50.. 851 08 RC 14 .. . 50.. 851 08 RC 16 .. P S . 50.. 851 08 RC 18 .. . 50.. . 50.. . 50.. P S Fiche avec raccord coude pour potting Plug with elbow backshell for potting 08 P 08 RP Taille de boitier Shell size HE 301 B 08 P HE 301 B 08 RP References / Part numbers contacts a souder solder contacts 10 851 08 P 10 .. . 50.. 851 08 RP 10 .. . 50.. 44.90 21.80 11.30 14.35 12 851 08 P 12 .. P S . 50.. 851 08 RP 12 .. P S . 50.. 46.90 26.15 13.30 15.90 17.70 14 851 08 P 14 .. P S . 50.. 851 08 RP 14 .. P S . 50.. 49.20 29.35 16.10 16.30 20.10 16 851 08 P 16 .. P S . 50.. 851 08 RP 16 .. P S . 50.. 50.60 32.50 16.90 19.30 22.80 P S . 50.. sertir crimp 851 08 P 8 .. P S 851 08 RP 8 .. souder solder 8 P S . 50.. L max contacts a sertir crimp contacts P S 18 851 08 P 18 .. P S . 50.. 851 08 RP 18 .. P S . 50.. 51.80 35.30 18.10 20.60 25.60 20 851 08 P 20 .. P S . 50.. 851 08 RP 20 .. P S . 50.. 53.70 38.85 19.70 21.90 28.80 22 851 08 P 22 .. P S . 50.. 851 08 RP 22 .. P S . 50.. 54.80 42.05 20.80 23.50 31.60 851 08 P 24 .. P S 851 08 RP 24 .. P S . 50.. 58.20 45.10 24.20 30.15 35.20 24 . 50.. Note : toutes les dimensions sont en mm / all dimensions are in mm 35 851 Series Fiche avec bracelet de blindage et raccord intermediaire Screened plug with straight adaptor 36 A 36 RA Taille de boitier Shell size VG 95328 N References / Part numbers contacts a sertir crimp contacts contacts a souder solder contacts D max G max 41.00 19.05 14.50 9.10 1/2 28 souder solder UNEF 2A 10 851 36 A 10 .. . 50.. 851 36 RA 10 .. . 50.. 41.00 21.80 18.70 12.08 5/8 24 12 851 36 A 12 .. P S . 50.. 851 36 RA 12 .. P S . 50.. 41.00 26.15 21.70 15.25 3/4 20 14 851 36 A 14 .. P S . 50.. 851 36 RA 14 .. P S . 50.. 41.00 29.35 25.10 18.15 7/8 20 16 18 20 24 P S . 50.. sertir crimp filetage threading 851 36 A 8 .. P S 851 36 RA 8 .. A max 8 22 . 50.. F L max P S P S 851 36 A 16 .. P S . 50.. 851 36 RA 16 .. P S . 50.. 41.00 32.50 28.13 21.32 1-20 851 36 A 18 .. P S . 50.. 851 36 RA 18 .. P S . 50.. 41.00 35.30 31.38 24.32 1-3/16 18 851 36 A 20 .. P S . 50.. 851 36 RA 20 .. P S . 50.. 43.30 38.85 34.30 26.73 1-3/16 18 851 36 A 22 .. P S 851 36 RA 22 .. P S . 50.. 43.30 42.05 37.60 30.67 1-7/16 18 851 36 A 24 .. P S 851 36 RA 24 .. P S . 50.. 43.50 45.10 40.70 33.08 1-7/16 18 . 50.. . 50.. Fiche avec bague de blindage et raccord droit demontable pour reprise de tresse et gaine thermoretractable (specifications 38 & 42)/ Screened plug with removable straight backshell for screen termination and heatshrink sleeving (38 & 42 suffix) 36 T 36 RT Taille de boitier Shell size References / Part numbers contacts a souder solder contacts 8 851 36 T 8 .. 10 851 36 T 10 .. 12 851 36 T 12 .. 38 42 contacts a sertir crimp contacts A max D max G max M max 51.60 19.05 18.25 7.45 3.70 51.60 21.80 20.25 9.00 3.70 P S . 50.. 38 42 851 36 RT 12 .. PS . 50.. 38 42 51.60 26.15 24.75 13.30 3.70 P S 38 42 851 36 RT 14 .. PS . 50.. 38 42 51.60 29.35 27.75 16.50 3.70 30.05 18.50 3.70 . 50.. P S . 50.. sertir crimp 851 36 RT 10 .. PS . 50.. 38 42 P S 851 36 RT 8 .. souder solder . 50.. 38 42 P S . 50.. L max 38 42 14 851 36 T 14 .. 16 851 36 T 16 .. P S . 50.. 38 42 851 36 RT 16 .. P S . 50.. 38 42 51.60 32.50 18 851 36 T 18 .. P S . 50.. 38 42 851 36 RT 18 .. P S . 50.. 38 42 52.00 35.30 34.15 21.90 3.70 20 851 36 T 20 .. P S . 50.. 38 42 851 36 RT 20 .. P S . 50.. 38 42 53.90 38.85 37.25 25.10 3.70 22 851 36 T 22 .. P S . 50.. 38 42 851 36 RT 22 .. P S . 50.. 38 42 53.90 42.05 40.45 28.20 3.70 24 851 36 T 24 .. P S . 50.. 38 42 851 36 RT 24 .. P S . 50.. 38 42 53.90 45.10 43.65 31.40 3.70 Note : toutes les dimensions sont en mm / all dimensions are in mm 36 851 Series Fiche avec bague de blindage et raccord droit demontable pour reprise de tresse et gaine thermoretractable / Screened plug with removable straight backshell for screen termination and heatshrink sleeving 36 G 36 RG Taille de boitier Shell size VG 95328 M References / Part numbers contacts a souder solder contacts P S . 50.. L max contacts a sertir crimp contacts P S A max D max G max M max 851 36 G 8 .. 54.00 19.05 16.30 7.45 3.60 10 851 36 G10 .. . 50.. 851 36 RG 10 .. PS . 50.. 54.00 21.80 18.30 10.30 3.60 12 851 36 G 12 .. PS . 50.. 851 36 RG 12 .. PS . 50.. 54.00 26.15 22.30 13.20 3.60 . 50.. 851 36 RG 14 .. PS . 50.. 54.00 29.35 25.30 16.50 3.60 . 50.. 851 36 RG 16 .. S . 50.. 54.00 32.50 28.30 19.35 3.60 P S 14 851 36 G 14 .. 16 851 36 G 16 .. P S . 50.. sertir crimp 8 P S 851 36 RG 8 .. souder solder P 18 851 36 G 18 .. P S . 50.. 851 36 RG 18 .. . 50.. 54.00 35.30 32.30 21.60 3.60 20 851 36 G 20 .. P S . 50.. 851 36 RG 20 .. S . 50.. 58.00 38.85 34.30 24.80 3.60 22 851 36 G 22 .. P S . 50.. 851 36 RG 22 .. S . 50.. 58.00 42.05 38.30 27.90 3.60 851 36 G 24 .. P S 58.00 45.10 41.30 31.00 3.60 24 . 50.. P S P P 851 36 RG 24 .. P S . 50.. Fiche avec raccord pour adaptation d'accessoires au pas electrique Plug with straight adaptor for electrical pitch access 06 Z 06 RZ Le manchon intermediaire special de type Z qui equipe la fiche a sertir 851 06 RZ est adapte aux accessoires de cablages. - Raccord a griffes et presse-etoupe - Raccord pour gaine polyflex - Raccord pour tuyau C.N.O.M.O. The Z type special adaptor which equips crimp plug 851 06 RZ fits following accessories. - Packing gland collet backshell - Backshell for polyflex sleeving - Backshell for C.N.O.M.O. tube Taille de boitier Shell size References / Part numbers contacts a sertir crimp contacts contacts a souder solder contacts D L max souder solder sertir crimp A max B max C max filetage threading PE 8 10 12 851 06 Z 12 .. PS . 50.. 14 851 06 Z14 .. 16 851 06 Z 16 .. PS . 50.. P S . 50.. 851 06 RZ 12 .. PS . 50.. 43.00 26.15 9.10 24.80 11 851 06 RZ 14 .. PS . 50.. 45.00 29.35 11.00 28.80 16 16 851 06 RZ 16 .. P S . 50.. 45.00 32.50 11.00 30.80 . 50.. 851 06 RZ 18 .. P S . 50.. 46.00 35.30 12.00 40.80 21 12.00 40.80 21 18 851 06 Z 18 .. P S 20 851 06 Z 20 .. P S . 50.. 851 06 RZ 20 .. P S . 50.. 46.50 38.85 22 851 06 Z 22 .. P S . 50.. 851 06 RZ 22 .. P S . 50.. 46.50 42.05 12.00 40.80 21 851 06 Z24 .. P S . 50.. 851 06 RZ 24 .. P S . 50.. 65.50 45.10 31.40 45.00 29 24 Note : toutes les dimensions sont en mm / all dimensions are in mm 37 851 Series Fiche avec bague de blindage et doigt de verrouillage, avec raccord droit court a reprise de tresse et gaine thermoretractable / Screened plug with lock finger and short backshell for screen termination and heatshrink sleeving 76 U 76 RU Taille de boitier Shell size References / Part numbers contacts a souder solder contacts L max contacts a sertir crimp contacts souder solder sertir crimp A max D max H max G max E max M max 8 10 12 851 76 U 12.. P S . 50.. 851 76 R U 12.. P S .50.. 35.60 25.00 22.50 32.00 13.20 19.50 3.70 14 851 76 U 14.. P S . 50.. 851 76 R U 14.. P S .50.. 35.60 29.00 25.50 32.00 16.10 21.00 3.70 16 851 76 U 16.. P S . 50.. 851 76 R U 16.. P S .50.. 35.60 32.00 28.50 32.00 19.25 22.50 3.70 18 20 22 24 Note : toutes les dimensions sont en mm / all dimensions are in mm 38 851 Series Connecteurs hermetiques / Hermetic connectors Embase a collerette carree Square flange receptacle 02 H Taille de boitier Shell size HE 301 B 02 H References / Part numbers P S C max A D max E F G H max M max J N max 8 851 02 H 8 .. 10 851 02 H 10 .. . 50.. 12.03 21.42 27.09 15.09 13.84 14.27 6.97 3.13 11.24 1.67 P S 15.01 24.62 31.87 18.26 13.84 17.06 6.97 3.13 11.24 1.67 12 851 02 H 12 .. P S . 50.. 19.07 26.98 35.04 20.62 13.84 19.85 6.97 3.13 11.24 1.67 14 851 02 H 14 .. P S . 50.. 22.25 29.36 38.22 23.00 13.84 23.00 6.97 3.13 11.24 1.67 16 851 02 H 16 .. P S . 50.. 25.42 31.73 41.39 24.61 13.84 26.18 6.97 3.13 11.24 1.67 . 50.. 18 851 02 H 18 .. P S . 50.. 28.60 34.12 44.57 26.97 13.84 29.36 6.97 3.13 11.24 1.67 20 851 02 H 20 .. P S . 50.. 31.77 37.20 47.74 29.36 15.42 31.74 6.99 3.13 12.00 2.48 22 851 02 H 22 .. P S . 50.. 34.95 40.47 50.92 31.75 16.23 34.92 6.99 3.13 12.00 2.48 24 851 02 H 24 .. P S . 50.. 38.12 43.66 55.69 34.92 17.04 38.10 6.19 3.81 12.81 2.48 Embase a fixation par ecrou Jam nut receptacle HE 301 B 07 H 07 H MS 3114 H VG 95328 F Taille de boitier Shell size 8 A C max D max G L max M max P 12.03 24.07 27.37 14.26 20.53 17.93 13.33 References / Part numbers 851 07 H 8 .. P S . 50.. P S 10 851 07 H 10 .. . 50.. 15.01 27.22 30.57 17.43 20.53 17.93 16.51 12 851 07 H 12 .. P S . 50.. 19.07 32.00 35.32 22.19 20.53 17.93 20.63 14 851 07 H 14 .. P S . 50.. 22.25 35.17 38.50 25.36 20.53 17.93 23.78 16 851 07 H 16 .. P S . 50.. 25.42 38.35 41.67 28.54 20.53 17.93 26.93 18 851 07 H 18 .. P S . 50.. 28.60 41.52 44.85 31.71 20.53 17.93 30.10 20 851 07 H 20 .. P S . 50.. 31.77 46.27 49.62 34.89 26.10 22.70 33.28 22 851 07 H 22 .. P S . 50.. 34.95 49.47 52.77 38.06 26.10 22.70 36.45 24 851 07 H 24 .. P S . 50.. 38.12 52.62 55.97 41.24 26.93 23.54 39.63 Note : toutes les dimensions sont en mm / all dimensions are in mm 39 851 Series Embase a collerette ronde, fixation par brasage Solder fixing receptacle HE 301 B 1H IH MS 3113 H VG 95328 G Taille de boitier Shell size References / Part numbers D max A . 50.. H max F G max M max N max 8 851 IH 8 .. 10 851 IH 10 .. P S 12 851 IH 12 .. P S . 50.. 19.07 21.80 8.19 13.84 19.83 10.69 0.76 14 851 IH 14 .. P S . 50.. 22.25 25.00 8.19 13.84 23.00 10.69 0.76 16 851 IH 16 .. P S . 50.. 25.42 28.10 8.19 13.84 26.18 10.69 0.76 0.76 P S . 50.. 12.03 16.40 8.19 13.84 14.27 10.69 0.76 15.01 19.40 8.19 13.84 17.06 10.69 0.76 18 851 IH 18 .. P S . 50.. 28.60 31.30 8.19 13.84 29.36 10.69 20 851 IH 20 .. P S . 50.. 31.77 33.70 8.16 15.42 31.74 12.32 0.76 22 851 IH 22 .. P S . 50.. 34.95 36.90 8.16 16.23 34.92 12.32 0.76 24 851 IH 24 .. P S . 50.. 38.12 40.10 7.36 17.04 38.10 13.12 0.76 Connecteurs pour connexions enroulees et a picots droits Wire-wrap and PC tail connectors Embase a collerette carree type 02E Square flange receptacle type 02E Version a picots droits PC tail version Version pour connexions enroulees (WW) Wire-wrap version Taille de boitier Shell size References / Part numbers version WW WW version P S version a picots PC tail version P S .50.. 16 40 A B max C max OD max H T E F max +1.63 0 J L max +1.25 0 .50.. 34 34A 12.03 11.70 1.32 10.84 15.09 20.99 12.42 3.13 20.50 9.46 10 851 02 E 10.. .50.. 34 34A 851 02 E 10.. .50.. 16 40 15.01 11.70 1.32 13.99 18.26 24.19 12.42 3.13 20.50 9.46 12 851 02 E 12.. PS.50.. 34 34A 851 02 E 12.. PS .50.. 16 40 19.07 11.70 1.32 17.37 20.62 26.54 12.42 3.13 20.50 9.46 14 851 02 E 14.. .50.. 16 40 22.25 11.70 1.32 20.57 23.00 28.89 12.42 3.13 20.50 9.46 16 P 16 851 02 E 16.. PS .50.. 34 34A 851 02 E 16.. S .50.. 40 25.42 11.70 1.32 23.62 24.61 31.29 12.42 3.13 20.50 9.46 18 851 02 E 18.. PS .50.. 34 34A 851 02 E 18.. PS .50.. 16 40 28.60 11.70 1.32 26.69 26.97 33.69 12.42 3.13 20.50 9.46 20 851 02 E 20.. PS .50.. 34 34A 851 02 E 20.. PS .50.. 16 40 31.77 14.35 2.15 29.89 29.36 36.89 10.69 3.13 23.80 7.76 851 02 E 22.. PS .50.. 16 40 34.95 14.35 2.15 33.04 31.75 39.99 10.69 3.13 23.80 7.76 851 02 E 24.. PS .50.. 16 40 38.12 15.20 2.15 36.24 34.92 43.15 10.69 3.81 23.80 7.76 8 851 02 E 8.. P S P S P S 34 34A 22 851 02 E 22.. .50.. 34 34A 24 851 02 E 24.. PS .50.. 34 34A 851 02 E 8.. P S P S 851 02 E 14.. .50.. Note : toutes les dimensions sont en mm / all dimensions are in mm 40 851 Series Embase a fixation par ecrou type 07A Jam nut receptacle type 07A Version a picots droits PC tail version Version pour connexions enroulees (WW) Wire-wrap version Taille de boitier Shell size 8 References / Part numbers version WW WW version 851 07 A 8.. P S version a picots PC tail version .50.. 34 34A P S 851 07 A 8.. P S .50.. 16 40 P S H T A B max C max F max +1.63 0 L max P max S max +1.25 0 26.94 12.42 20.64 19.29 23.94 9.46 9.46 12.03 17.90 2.64 10 851 07 A 10.. .50.. 34 34A 851 07 A 10.. .50.. 16 40 15.01 17.90 2.64 30.14 12.42 20.64 22.38 26.95 12 851 07 A 12.. PS.50.. 34 34A 851 07 A 12.. PS.50.. 16 40 19.07 17.90 2.64 34.94 12.42 20.64 27.13 31.74 9.46 14 851 07 A 14.. PS.50.. 34 34A 851 07 A 14.. PS.50.. 16 40 22.25 17.90 2.64 38.04 12.42 20.64 30.33 34.94 9.46 16 851 07 A 16.. PS .50.. 34 34A 851 07 A 16.. PS .50.. 16 40 25.42 17.90 2.64 41.26 12.42 20.64 33.48 38.24 9.46 18 851 07 A 18.. .50.. 34 34A 851 07 A 18.. PS .50.. 16 40 28.60 17.90 2.64 44.44 12.42 20.64 36.68 41.34 9.46 20 851 07 A 20.. PS .50.. 34 34A 851 07 A 20.. PS .50.. 16 40 31.77 22.45 3.44 49.14 8.64 25.99 39.83 46.04 8.49 P S P S 34 34A 22 851 07 A 22.. .50.. 24 851 07 A 24.. PS .50.. 34 34A P S 16 40 34.95 22.45 3.44 52.24 8.64 25.99 43.03 49.24 8.49 851 07 A 24.. PS .50.. 16 40 38.12 23.30 3.44 55.54 7.79 26.84 46.18 52.74 7.79 851 07 A 22.. .50.. Percage cloison / Panel cut-out Embase a collerette carree Square flange receptacle Taille de boitier Shell size Embase a collerette ronde Solder fixing receptacle Embase a fixation par ecrou Jam nut receptacle N A0.1 B0.1 C0.1 E0.15 J0.15 P0.1 min max X min 8 15.55 14.60 14.70 15.10 3.15 1.57 3.17 13.75 2.90 10 18.80 17.75 17.50 18.26 3.15 1.57 3.17 16.95 2.90 12 22.15 22.50 20.20 20.62 3.15 1.57 3.17 21.50 2.90 14 25.30 25.70 23.40 23.00 3.15 1.57 3.17 24.20 2.90 16 28.45 28.85 26.60 24.60 3.15 1.57 3.17 27.35 2.90 18 31.65 32.05 29.80 26.97 3.15 1.57 3.17 30.55 2.90 20 34.80 35.20 32.10 29.36 3.15 1.57 6.35 33.70 5.50 22 38.00 38.40 35.30 31.75 3.15 1.57 6.35 36.90 5.50 24 41.20 41.55 38.40 34.92 3.73 1.57 6.35 40.05 5.50 Note : toutes les dimensions sont en mm / all dimensions are in mm 41 851 Series Accessoires / Accessories Embase de repos / Dummy receptacle Taille de boitier Shell size References Part numbers A C max E J M max N max 8 8500-18 12.03 20.99 15.09 3.13 11.70 1.32 10 8500-19 15.01 24.19 18.26 3.13 11.70 1.32 12 8500-20 19.07 26.54 20.62 3.13 11.70 1.32 14 8500-21 22.25 28.89 23.00 3.13 11.70 1.32 16 8500-26 25.42 31.29 24.61 3.13 11.70 1.32 18 8500-22 28.60 33.69 26.97 3.13 11.70 1.32 20 8500-23 31.77 36.89 29.36 3.13 14.35 2.15 22 8500-24 34.95 39.99 31.75 3.13 14.35 2.15 24 8500-25 38.12 43.15 34.92 3.81 15.20 2.15 Bouchons de protection plastique pour embase & fiche Plastic protective caps for receptacle and plug Taille de boitier Shell size Bouchons pour embase Caps for receptacles Bouchons pour fiches Caps for plugs 8 8500-5585 A 8500-5594 10 8500-5586 A 8500-5595 12 8500-5587 A 8500-5596 14 8500-5588 A 8500-5597 16 8500-5589 A 8500-5598 18 8500-5590 A 8500-5599 20 8500-5591 A 8500-5600 22 8500-5592 A 8500-5601 24 8500-5593 A 8500-5602 Joint de cloison / Gaskets Taille de boitier Shell size Joints pour embase a collerette carree / Gaskets for square flange receptacle Joints pour embase a fixation par ecrou / Gaskets for jam nut receptacle neoprene fairprene neoprene vitton 8 8500-275 8500-4164 3330102 3330675 10 8500-276 8500-4165 3330103 3330670 12 8500-277 8500-4166 3330104 3330671 14 8500-278 8500-4167 3330105 3330672 16 8500-283 8500-4168 3330106 3331048 18 8500-279 8500-4169 3330107 3331049 20 8500-280 8500-4170 3330108 3331050 22 8500-281 8500-4171 3330109 3331051 24 8500-282 8500-4172 3330110 3331052 Note : toutes les dimensions sont en mm / all dimensions are in mm 42 43 851 Series Bouchons / Caps References / Ordering Information Racine / Basic series Type de boitier / Shell size Reference pour embase / Part numbers for receptacle Reference pour fiche / Part numbers for plug 8 02 10 10 03 11 12 04 12 14 05 13 16 27 28 18 06 14 8500 05 22 08 16 24 09 17 20 07 15 --- Specifications / Specifications pour type de bouchon & protection, voir tableau ci-dessous / for cap & plating, see table below Types et protections / Type and plating Bouchons pour embase / Receptacle cap Type de bouchon Cap type Cadmiage vert olive Olive green cadmium Cadmium incolore White cadmium Oxydation noir Black anodised Bouchon avec chainette metallique et oeillet de fixation Cap with chain and ring D 02 D Bouchon avec cordonnet nylon et oeillet de fixation Cap with nylon cord and ring B Bouchon avec cordonnet nylon et rondelle de fixation (boitier 10, 12, 14, 16 & 18) Cap with nylon cord and washer (shell 10, 12 , 14, 16 & 18) Bouchons pour fiche / Plug cap Nickelage Nickel Cadmiage vert olive Olive green cadmium Cadmium incolore White cadmium Oxydation noir Black anodised Nickelage Nickel 29 D 44 D D 02 D 29 D 44 D 02 B 29 B 44 B B 02 B 29 B 44 B - - - - E - - - Bouchon avec cordonnet nylon et rondelle de fixation Cap with nylon cord and washer H - - 44 H - - - - Bouchon avec chainette metallique et rondelle de fixation Cap with chain and washer J - - - - - - - JQ7 - - - - - - - M - - - M - - - Bouchon 500 H brouillard salin Cap 500hr salt spray Bouchon sans cordonnet Cap without chain Bouchons pour fiches / Caps for plugs D B&M E Taille de boitier Shell size OA max B max C+60 D+20 E OF 8 16.80 19.84 132 128 - - 10 19.80 19.84 132 128 132 14.00 12 23.90 19.84 148 140 148 17.60 14 27.00 19.84 148 140 148 20.80 16 30.20 19.84 148 140 148 25.60 18 33.40 19.84 148 140 148 28.70 20 36.50 21.44 168 153 - - 22 39.80 21.44 168 153 - - 24 42.90 22.22 168 153 - - - nous contacter / consult us Note : toutes les dimensions sont en mm / all dimensions are in mm 44 851 Series Bouchons pour embases / Caps for receptacles D B&M J & JQ7 H Taille de boitier Shell size OA max B max C+60 D+20 J max H+20 K+60 8 19.00 21.44 84 77 14.80 80 84 10 21.80 21.44 84 77 17.90 80 84 12 26.10 21.44 100 89 22.70 90 100 14 29.30 21.44 100 89 25.90 90 100 16 32.50 21.44 100 89 29.00 90 100 18 35.30 21.44 100 89 32.20 90 100 20 38.80 21.44 116 102 35.40 110 116 22 42.00 21.44 116 102 38.60 110 116 24 45.10 22.22 116 102 41.70 110 116 Note : toutes les dimensions sont en mm / all dimensions are in mm 45 /RC 46 raccord droit a presse-etoupe straight sealing gland backshell J 8501-0188 903 44 ecrou nut presseetoupe sealing gland - 42 - 8500-5900 LP 8500-5873 851 T 08-42 851 T 08-38 8501-0188 900 8500-5901 LP 8500-5874 851 T 10-42 851 T 10-38 8500-8977 903 - 8500-8977 900 44 - - - 29 ou/or 031 29 ou/or 031 - - 38 G/RG raccord droit demontable pour reprise de tresse et gaine thermoretractable removable straight backshell for screen termination and heatshrink sleeving 8500-4246 900 8500-4245 900 - 8500-4022 110 8500-4022 LP - - 8500-449 LP 8500-683 8500-467 8500-1560 LP 8500-2470 903 8500-2470 902 8500-2470 900 8500-5883 202 8500-5883 110 8500-5883 LP 10 - T/RT M/RM raccord droit demontable pour gaine thermoretractable removable straight backshell for heatshrink sleeving - 44 8500-4021 LP 8500-4021 110 - 44 29 ou/or 031 - 8500-448 LP 8500-682 8500-466 8500-1559 LP 29 ou/or 031 - - - 8500-2469 903 44 8500-2469 900 8500-2469 902 8500-5882 202 44 29 ou/or 031 8500-5882 110 8500-5882 LP 8 29 ou/or 031 - protection plating specification 38 & 42 T/RT raccord droit pour gaine thermoretractable straight backshell for heatshrink sleeving raccord droit demontable pour reprise de tresse et gaine thermoretractable removable straight backshell for screen termination and heatshrink sleeving A/RA RP Potting P ecrou nut P/RP EC AC E/R raccord droit intermediaire straight adaptor raccord droit pour potting straight backshell for potting raccord droit a serre-cables straight cable clamp raccord simple backnut designation designation taille de boitier shell size Raccords droits / Straight backshells 8500-5902 LP 8500-5875 851 T 12-42 851 T 12-38 8501-0189 903 - 8501-0189 900 - - 8500-4247 900 - 8500-4023 110 8500-4023 LP - - 8500-450 LP 8500-684 8500-468 8500-1561 LP 8500-2471 903 8500-2471 902 8500-2471 900 8500-5884 202 8500-5884 110 8500-5884 LP 12 8500-5903 LP 8500-5876 851 T 14-42 851 T 14-38 8500-8978 903 - 8500-8978 900 - - 8500-4248 900 - 8500-4024 110 8500-4024 LP - - 8500-451 LP 8500-685 8500-469 8500-1562 LP 8500-2472 903 8500-2472 902 8500-2472 900 8500-5885 202 8500-5885 110 8500-5885 LP 14 8500-5904 LP 8500-5877 851 T 16-42 851 T 16-38 8501-0190 903 - 8501-0190 900 - - 8500-4249 900 - 8500-4025 110 8500-4025 LP - - 8500-452 LP 8500-686 8500-470 8500-1563 LP 8500-2473 903 8500-2473 902 8500-2473 900 8500-5886 202 8500-5886 110 8500-5886 LP 16 8500-5905 LP 8500-5878 851 T 18-42 851 T 18-38 8500-8979 903 - 8500-8979 900 - - 8500-4250 900 - 8500-4026 110 8500-4026 LP - - 8500-453 LP 8500-687 8500-471 8500-1564 LP 8500-2474 903 8500-2474 902 8500-2474 900 8500-5887 202 8500-5887 110 8500-5887 LP 18 8500-5906 LP 8500-5879 851 T 20-42 851 T 20-38 8500-8980 903 - 8500-8980 900 - - 8500-4251 900 - 8500-4027 110 8500-4027 LP - - 8500-3185 LP 8500-688 8500-472 8500-1565 LP 8500-2475 903 8500-2475 902 8500-2475 900 8500-5888 202 8500-5888 110 8500-5888 LP 20 8500-5907 LP 8500-5880 851 T 22-42 851 T 22-38 8500-8981 903 - 8500-8981 900 - - 8500-4252 900 - 8500-4028 110 8500-4028 LP - - 8500-3186 LP 8500-689 8500-473 8500-1566 LP 8500-2476 903 8500-2476 902 8500-2476 900 8500-5889 202 8500-5889 110 8500-5889 LP 22 8500-5908 LP 8500-5881 851 T 24-42 851 T 24-38 8500-8982 903 - 8500-8982 900 - - 8500-4253 900 - 8500-4029 110 8500-4029 LP - - 8500-456 LP 8500-690 8500-474 8500-1567 LP 8500-2477 903 8500-2477 902 8500-2477 900 8500-5890 202 8500-5890 110 8500-5890 LP 24 851 Series References des raccords / Backshell ordering information Pour les types de protection voir references page 11 / For plating types see part numbers page 11 - - 44 - 29 ou/or 031 44 - 8500-5989 900 8500-5873 8 29 ou/or 031 - protection plating - - - - - - 8500-5990 900 8500-5874 10 - - 8500-8185 LP - - 8500-8474 900 8500-5991 900 8500-5875 12 - - 8500-8186 LP - - 8500-8475 900 8500-5992 900 8500-5876 14 47 T/RT RP P - 44 raccord coude a serre-cables elbow cable clamp backshell EC/RC 8500-791 902 - 44 - 29 ou/or 031 8500-791 900 8500-4776 110 8500-4776 LP 8500-682 29 ou/or 031 - - 44 8500-466 - 8500-8351 900 - 29 ou/or 031 8500-8347 202 44 8500-8347 LP 8500-8347 110 29 ou/or 031 Raccords coudes / Elbow backshells raccord droit pour gaine thermoretractable straight backshell for heatshrink sleeving raccord droit pour potting straight backshell for potting /RC raccord droit a serre-cables straight cable clamp EC AC E/R raccord simple backnut - - 8500-792 902 8500-792 900 - 8500-4777 110 8500-4777 LP 8500-683 8500-467 - - 8500-1790 900 8500-374 202 8500-374 110 8500-374 LP - 8500-793 902 8500-793 900 - 8500-4778 110 8500-4778 LP 8500-684 8500-468 - - 8500-1791 900 8500-375 202 8500-375 110 8500-375 LP - 8500-794 902 8500-794 900 - 8500-4779 110 8500-4779 LP 8500-685 8500-469 - - 8500-1792 900 8500-376 202 8500-376 110 8500-376 LP Raccords droits pour embase 07 / Straight backshells for receptacle 07 Z/RZ raccord pour adaptation d'accessoire au pas electrique straight adaptor for electrical pitch access ecrou nut U/RU JC presseetoupe sealing gland raccord droit court pour reprise de tresse et gaine thermoretractable short backshell for screen termination and heatshrink sleeving raccord droit a presse-etoupe et serre-cables straight sealing gland and cable clamp backshell designation designation taille de boitier shell size Raccords droits / Straight backshells - 8500-795 902 8500-795 900 - 8500-4780 110 8500-4780 LP 8500-686 8500-470 - - 8500-1793 900 8500-377 202 8500-377 110 8500-377 LP - - 8500-8187 LP - - 8500-8476 900 8500-5993 900 8500-5877 16 - 8500-796 902 8500-796 900 - 8500-4781 110 8500-4781 LP 8500-687 8500-471 - - 8500-1794 900 8500-378 202 8500-378 110 8500-378 LP - - 8500-8188 LP - - - 8500-5994 900 8500-5878 18 - 8500-3224 902 8500-3224 900 - 8500-4782 110 8500-4782 LP 8500-688 8500-472 - - 8500-1795 900 8500-379 202 8500-379 110 8500-379 LP - - 8500-8189 LP - - - 8500-5995 900 8500-5879 20 - 8500-3225 902 8500-3225 900 - 8500-4783 110 8500-4783 LP 8500-689 8500-473 - - 8500-1796 900 8500-380 202 8500-380 110 8500-380 LP - - 8500-8190 LP - - - 8500-5996 900 8500-5880 22 - 8500-799 902 8500-799 900 - 8500-4784 110 8500-4784 LP 8500-690 8500-474 - - 8500-1797 900 8500-381 202 8500-381 110 8500-381 LP - - 8500-8191A LP - - - 8500-5997 900 8500-5881 24 851 Series References des raccords / Backshell ordering information Pour les types de protection voir references page 11 / For plating types see part numbers page 11 851 Series Outillages / Tools Outillage de sertissage / Crimping pliers Tailles de contacts Contact sizes Section de cables / Wire sizes 20 16 mm AWG 0.93 18 0.60 20 0.38 22 0.21 24 1.91 14 1.34 16 0.93 18 References / Part numbers pince a sertir / crimping tool ] ] positionneur / locator 8476-01 (M 22520/2-01) 8476-02 (M 22520/2-02) 8365 (M 22520/1-01) 8365-02 (M 22520/1-02) 8365 (M 22520/1-01) 8365-02 (M 22520/1-02) Outillage d'insertion et d'extraction / Insertion and extraction tools Type de contacts Contact types References / Part numbers Tailles de contacts Contact sizes outil d'insertion / insertion tools outil d'extraction / extraction tools 20 8500-29B* 8500-36A 16 8500-39 8500-38A 20 8500-31 8500-31 16 8500-39 ou/or 8500-37 8500-37 a sertir crimp pour connexion enroulee for wire-wrap Tube de rechange pour outil / Square tube for tool : * 8500-36A : ref. 8500-1163 * 8500-38A : ref. 8500-1486 021 * Sauf arrangements 8-2, 8-3, 8-4, 12-14 : outil 8500-93B * Except 8-2, 8-3, 8-4, 12-14 contact layouts : insertion tool 8500-93B Obturateurs / Filler plugs Tailles de contacts Contact sizes References / part numbers Couleur / Colour 20 8500-4144 gris / grey 16 8500-479 bleu / blue 20 8500-4144 A (MS 3187 A 20) rouge / red 16 8500-4267 (MS 3187-16) bleu / blue 48 Profil / Profile 851 Series Outils de sertissage / Crimping pliers 8476-01 (M 22520/2-01) avec / with 8476-02 (M 22520/2-02) 8365 (M 22520/1-01) avec / with 8365-02 (M 22520/1-02) Outils de d'insertion / Insertion tools 8500-39 8500-29B 49 851 Series Outils d'extraction / Extraction tools 8500-36 A (Contact a sertir #20 / Crimp contact #20) 8500-38 A (Contact a sertir #16 / Crimp contact #16) 8500-31 (pour connexion enroulee #20 / for wire-wrap #20) 8500-37 (pour connexion enroulee #16 / for wire-wrap #16) Accessoires / Accessories 8498-04 Cle a sangle pour serrage des accessoires arriere Strap backshell tightening spanner 8500-30 Support de serrage Tightening support 50 851 Series Notice de cablage / Wiring instructions Preparation des cables / cable preparation Contacts a sertir Crimp contacts Denudage Stripping * Apporter le plus grand soin a cette operation. Utiliser une pince a denuder appropriee a la section du cable et en parfait etat. * This operation should be carried out with great care. Use stripping pliers which are in good condition and which are designed for use with the size of wire being stripped. * Afin de conserver toutes les caracteristiques d'etancheite du connecteur et permettre un cablage rationnel, les fils doivent avoir les dimensions ci-dessous : O sur gaine Taille des contacts min. max. 20 1.20 2.11 16 1.60 2.80 * Taux de remplissage conseille : - 050 % O maxi / 50 % O mini - 100 % O moyen * Contacts de taille 20 pour les cables de : - O sur gaine a 2 mm, denuder sur une longueur de 4,5 mm - O sur gaine > a 2 mm, denuder sur une longueur de 7 mm. * Contacts de taille 16, denuder le cable sur 6 mm. * In order to maintain the connector's excellent sealing characteristics and, at the same time, meet the highest cabling standards the wires should have the following external sheath dimensions : O over sheath Contacts size min. 20 1.20 2.11 16 1.60 2.80 max. * Recommended loading : - 050 % with max. diam. wires / 50 % with min. diam. wires - 100 % with medium size wires. * Size 20 contacts for cables : - when O over insulation 2 mm strip to a 4.5 mm length - when O over insulation > 2 mm strip to a 7-mm length. * Size 16 contacts, strip the cable to a length of 6 mm. Raccordement cablescontacts Cable-contact assembly * Enfiler le cable dans le fut du contact et s'assurer que les brins du cable sont apparents dans le trou de visite. * Insert the wire into the crimp barrel and ensure that it has penetrated correctly by checking that it may be seen through the lateral hole in the barrel. Utilisation de l'embout reducteur Reducing sleeve * Contacts de taille 20, si le cable a une section inferieure a 0,21 mm2, il est indispensable d'intercaler un embout reducteur : ref. 8500-781. * Contacts de taille 16, embout reducteur : ref. 8500-1985, si le cable a une section egale a 0,60 mm2. contact / contact * If a wire with a cross sectional area of less than 0.21 mm2 is used with a size 20 contact, it will be necessary to use a reducing sleeve : ref. 8500-781. * Wires of cross sectional area of 0.6 mm2 may be used with size 16 contacts by using a reducing sleeve, ref. 8500-1985. embout / sleeve cable / cable 51 851 Series Sertissage des contacts / Contact crimping * Avec pince a sertir MS 22520/1-01 reference Souriau 8365 et tourelle MS 22520/1-02 8365-02: - position rouge pour contact taille 20 - position bleue pour contact taille 16. * With crimping pliers MS 22520/1-01 Souriau part number 8365 and turret MS 22520/1-02 8365-02 : - red position for size 20 contacts - blue position for size 16 contacts. * Avec pince a sertir MS 22520/2-01 reference Souriau 8476-01 et positionneur MS 22520/2-02 847602 : - contact taille 20 uniquement. * With crimping pliers MS 22520/2-01 Souriau part number 8476-01 and locator MS 22520/2-02 8476-02 : - for size 20 contacts only. 8365 Note : not be used with reducing sleeve. Nota : ne pas utiliser avec embout reducteur. Les pinces doivent etre utilisees cote poincons. * Presser sur les poignees de la pince jusqu'au declic final, relacher ; la pince doit s'ouvrir d'elle-meme. * Introduire l'ensemble fil et contact, ou fil embout reducteur et contact entre les 4 poincons jusqu'a venir en butee dans le positionneur. Squeeze pliers firmly until a click is heard, the pliers should spring open when the ratched mechanism is released. * Hold indentor side up-insert the wire-contact assembly or mire-reducing sleeve-contact assembly between the four indentors, ensuring that the contact bottoms in the locator. 8476-01 * Fully close the jaws, once the contact is crimped the pliers must spring open remove wire + crimped contact, check crimp aspect. * Presser a fond jusqu'au declic final, la pince doit s'ouvrir une fois le sertissage effectue. * Extraire fil et contact serti et controler l'aspect du sertissage. 52 851 Series Insertion des contacts / Crimp contact insertion Avant les operations suivantes, demonter et enfiler sur les cables l'accessoire arriere du connecteur. Outils d'insertion * Contacts taille 20* : pince 8500-29B * Contacts taille 16 : outil 8500-39. Utilisation des outils d'insertion Engager manuellement le contact dans l'alveole de l'isolant. * Contacts de taille 20 : prendre le fil entre les 2 becs de la pince en butee sur l'arriere de la jupe du contact. * Contacts de taille 16 : mettre la partie sertie du contact dans le bec de l'outil, l'extremite de celui-ci venant en butee sur la collerette principale du contact. Introduire chaque contact dans le logement de l'isolant en poussant dans l'axe jusqu'a l'accrochage du contact dans le clip. Obturateurs Lorsque certains contacts ne sont pas cables, afin de conserver les caracteristiques d'etancheite, il est indispensable de prevoir un obturateur a l'arriere du contact : le contact doit etre monte dans son alveole avant l'obturateur. contact / contact fil / wire outil / tool Mise en place du contact dans l'outil Contact position in the tool * Sauf arrangements 8-2, 8-3, 8-4, 12-14 : outil 8500-93B First disassemble and slide connector rear accessory over cables. Insertion tools * Size 20 contacts* : pliers 8500-29B * Size 16 contacts : tool 8500-39. Use of insertion tools Manually insert the contact into the desired insert cavity. * Size 20 contacts : insert the wire between the pliers jaws, the tip of the jaws butting the contact shoulder. * Size 16 contacts : introduce the contact crimped section in the tool jaws, the tip of the tool butting against the contact main flange. Introduce contacts one by one in insert cavities pushing straight in until the contact snaps into position and the clip ensures contact retention. Filler plugs Where certain contacts are unwired and where it is necessary to fully maintain the connector's sealing characteristics, a filler plug must be used. Note that the contact must be inserted before the filler plug. sens du montage direction of filler plug insertion * Except 8-2, 8-3, 8-4, 12-14 contact layouts : tool 8500-93B 53 851 Series Extraction des contacts a sertir / Crimp contact extraction Outils d'extraction Tous les contacts pour isolants a clips sont demontables a l'aide d'un outil semi-automatique : * contacts taille 20 : outil reference 8500-36A * contacts taille 16 : outil reference 8500-38A. Avant les operations suivantes, demonter et faire glisser sur les cables l'accessoire arriere du conducteur. * Ne pas agir sur le poussoir de l'outil. * Introduire par l'avant du connecteur (cote accouplement) le tube de l'outil sur le contact male ou femelle jusqu'au 1er repere pour les contacts males et au 2eme repere pour les contacts femelles. * Cette operation doit etre effectuee delicatement, dans l'axe du contact a l'aide d'un leger mouvement rotatif. * Extraire le contact en actionnant le poussoir, retirer l'outil avec precaution et tirer sur le fil pour degager l'ensemble fil-contact. Nota : les outils possedent un systeme a ressort reglable (par le bouton molete arriere), permettant ainsi le decrochage automatique du contact. Extraction tools 1er repere first mark All contacts for use in insulators with clips are extracted using a semi-automatic tool : * size 20 contacts : tool type 8500-36A * size 16 contacts : tool type 8500-38A. First dissassemble and slide connector rear accessory over cables. * Do not operate the tool slide button. * Bring the tool tip over the male or female contact to be removed from connector front (mating face) as far as the first mark for male contacts and the second mark for female contacts. * This operation, should be carried out delicately in a direction parallel to the contact centre line with a light turning action. * Extract contact pushing the slide button fully forward, carefully remove tool and pull wire to release the wire-contact assembly. Note : tools have an adjustable spring system (rear knurled knob) also for automatic contact disengagement. 54 2eme repere second mark 851 Series Schemas d'implantations pour circuits imprimes / Co-ordinates for PC tail contacts Isolant male, vue face arriere (cote soudure) / Terminations viewed from male rear face (soldering side) O trous de percage 0,90 mm min. (# 20) + trous de percage 1,3 mm min. (# 16) tolerance de positionnement des trous sur carte / Hole size : 0.90 mm min. (# 20) + Hole sizes : 1.3 mm min. (# 16) hole position tolerance. 8-2 8-4 8-3 O 8-3A/8-98 O 8-33 10-6 10-7 10-98 12-2 12-3 12-8 12-10 12-14 14-5 14-12 14-15 55 14-18 0.10 851 Series 14-19 16-26 16-8 16-23 18-11 18-30 18-32 56 851 Series 20-16 20-24 20-25 20-27 20-39 20-41 57 851 Series 22-21 22-32 22-34 22-36 22-55 58 851 Series 24-61 59 851 Series Prise largable push-pull / Push-pull locking plug Caracteristiques generales General characteristics * * * * * * * * * Verrouillage : en poussant sur la bague Deverrouillage : par traction sur la tirette de largage Montage : sur toutes les embases 851 Arrangements et contacts a sertir et a souder : (voir pages 10 et 14/15) * Autres caracteristiques : (voir page 9) Locking : by pushing on the coupling nut Unlocking : by pulling a lanyard Mounted : on all 851 receptacles Layouts and crimp solder contacts : (see pages 10 and 14/15) Other characteristics : (see page 9) References / Ordering information Racine / Basic series version a sertir - crimp version version a souder - solder version 856 856 06 06 R E Type de boitier / Shell type 06 fiche droite - plug for use with straight backshell 08 fiche coudee - plug for use with 90 backshell Type de raccord / Backshell type raccord simple / backnut R/E RC/EC raccord droit a serre-cables / straight cable clamp raccord droit intermediaire / straight adaptor RA/A raccord droit pour potting / straight backshell for potting RP/P raccord droit pour gaine thermoretractable / straight backshell for heatshrink sleeving RT/T raccord droit demontable pour gaine thermoretractable RM/M straight removable backshell for heatshrink sleeving specification 38 ou/or 42: raccord droit demontable pour reprise de tresse et gaine thermo*RT/*T retractable / straight removable backshell for screen termination and heatshrink sleeving RC/EC raccord coude a serre-cables / 90 cable clamp Taille de boitier / Shell size 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Arrangements / Contact layouts Voir tableau des arrangements page 14/15 - See table page 14/15 Type de contact/ Contact type P = male / male - S = femelle / female Positionnement / Orientation Normal (n'apparait pas dans la reference) w, x, y, z - voir tableau page 16 Normal (not included in part number) w, x, y, z - see table page 16 Indice obligatoire / Obligatory suffix Specification / Specification protection cadmie vert olive (version a souder) 07 olive-green cadmium plating (solder version) protection cadmie vert olive (version a sertir) 08 olive green cadmium plating (crimp version) protection cadmie blanc (version a sertir et a souder) 09 white cadmium plating (crimp and solder version) 60 ** ** ** ** P P * * 50 50 ** ** 851 Series Taille de boitier Shell size 8 10 12 14 16 18 20 22 24 A 19.50 22.80 27.30 30.80 34.00 37.00 41.00 44.50 49.20 B 24.95 28.25 32.55 36.05 39.05 42.05 45.80 49.20 53.45 06 R E 32.00 32.00 32.00 32.00 32.00 32.00 31.80 31.80 31.80 06 RC E 47.30 47.30 47.30 47.30 50.50 50.50 49.90 49.90 49.90 06 RP E 42.10 42.10 42.10 42.10 42.10 45.40 49.80 49.80 49.80 06 RA E 41.00 41.00 41.00 41.00 41.00 41.00 43.00 43.00 43.20 06 RM E 50.00 50.00 50.00 50.00 50.00 50.00 51.70 51.70 51.70 06 RT specifications 38 ou/or 42 E 50.00 50.00 50.00 50.00 50.00 50.00 51.70 51.70 51.70 E 50.10 52.60 54.90 58.50 60.80 65.00 68.80 71.20 76.20 D max 16.00 18.00 19.50 22.00 23.50 25.00 26.50 28.00 31.00 Dimensions 08RC Nota : Encombrements des raccords, se reporter aux dimensions des pages precedentes Note : For backshells dimensioning, refer to values given in preceding pages Note : toutes les dimensions sont en mm / all dimensions are in mm 61 851 Series Connecteurs filtres 8F51 / 8F51 filter connectors Generalites General information Ces connecteurs sont derives des specifications standards MIL-DTL-26482 G serie 1 - NFC 93422 (HE 301 B) - VG 95328. These connectors are derived from standard specifications MIL-DTL-26482 G series 1 - NFC 93422 (HE 301 B) - VG 95328. Ils sont interchangeables en fixation et intermariables avec les connecteurs standards. They are intermountable and intermateable with standard connectors. Differents types de filtres peuvent equiper ces connecteurs et permettent ainsi de supprimer les interferences RFI/EMI dans differentes gammes de frequences. L'utilisation de ces connecteurs a filtres performants incorpores offre les avantages suivants : * Filtrage efficace des parasites a l'entree ou a la sortie d'un equipement electronique, * Ecran de blindage du coffret conserve, * Encombrement et cout plus reduit par rapport a l'utilisation de filtres individuels cables a l'arriere du connecteur, * Choix de 4 types de contacts standards - merci de nous consulter pour tout autre valeur de capacitance et type de filtre, * Possibilite de mixage de filtres dans le meme arrangement : contacts filtres, non filtres et lies a la masse. Different types of filters may be fitted in these connectors to eliminate RFI/EMI in different frequency ranges. Using built-in High Performance EMI filters offers the following advantages : * Efficient filtering on interferences at electronic equipment input or output, * Case screen-shielding efficiency is maintained, * Cost and volume saving as compared with the use of discrete filters wired down the line, * 4 types of standard filters are available - Please consult us for other capacitance and filter types, * Combinations of mixed filter in the same layout: filtered, non-filtered and grounded contacts available. An adaptor version is also a simple technique to equip existing systems which do not incorporate filters. La version adaptateur, egalement disponible, permet d'equiper simplement les systemes existants non filtres. Electrical characteristics Caracteristiques electriques * Intensite max. par contact 7.5 A (#20); 13 A (#16) * Tension max. de service 200 Vdc / 120 Vac * Types de filtre standard C, Pi * Valeur de capacitance typ. de 500 pF a 200 nF * Performance filtre Jusqu'a -60dB / -80dB * Max. current rating per contact 7.5 A (#20); 13 A (#16) * Max. operating voltage 200 Vdc / 120 Vac * Standard filter types C, Pi * Capacitance range typically 500 pF - 200 nF * Filter performance up to -60dB / -80dB For this product, consult our FILTER CONNECTOR department. Consulter pour ce produit notre departement CONNECTEURS FILTRES. 62 851 Series Connecteurs specifiques et accessoires de connexion SNC SNC specific connectors and connection accessories Designations Designations References Part numbers * Traversee de cloison a collerette carree, broches, douilles Boitiers 8 a 24 : arrangements 8.03 / 10.06 / 12.10 / 14.19 / 16.26 / 18.32 / 20.41 / 22.55 / 24.61 Positionnements : N & W Protections : 085 cadmiage vert / 112 oxydation anodique noire brillante * Square flange through bulkhead, pins, sockets Shell sizes 8 to 24 : layouts 8.03 / 10.06 / 12.10 / 14.19 / 16.26 / 18.32 / 20.41 / 22.55 / 24.61 Insert rotations : N & W Plating : 085 green cadmium / 112 black anodized * Raccord coude a serre-cables a encombrement reduit, pour fiche 08RC Boitiers 12, 14, 16, 18 et 22 * Short profile 90 backshell with cable clamp for 08 RC plug Shell sizes 12, 14, 16, 18 and 22 * Connecteur fiche et embase Boitier 24 equipe de 3 contacts # 16 - 7 contacts # 20 - 1 contact coaxial 50 (pour cable KX 15) * Plug and receptacle connector Shell size 24 : contact layout = 3 contacts # 16, 7 contacts # 20, 1 coaxial contact 50 (for KX15 cable) * Fiche shunt * Shunt plug EC 52 B SN 556 SN 775 P SN 775 S SN 901 * Raccord droit en deux parties avec presse-etoupe et brides de serrage Boitiers 8, 10 et 16 * Straight two-piece backshell with sealing gland and cable strap Shell sizes 8, 10 and 16 * Fiche equipee d'une bague de verrouillage a oreilles Boitiers 20, 22 et 24 * Plug with flanged coupling nut Shell sizes 20, 22 and 24 * Prolongateur de test, broches, douilles Boitiers 8 a 24, arrangements avec contacts de # 20 * Cable connecting test connector, pins, sockets Shell sizes 8 to 24, arrangements with size contacts # 20 * Bague a oreilles avec vis pointeau adaptable sur fiche 851 Boitiers 8 a 24 * Ring with lugs with cone-pointed grub screws fitting 851 plug Shell sizes 8 to 24 * Raccord coude ferme avec cheminee pour reprise de tresse par magnetostriction Boitiers 8 a 24 * Elbow backshell with closing sleeve for shield termination by magnaforming Shell sizes 8 to 24 * Embase type 07A a picots droits, demontage par l'avant Arrangements : 14.19 (N) / 16.26 (N) / 18.32 (N, X) / 20.41 (N, W, X, Y) / 22.55 (N, W, X, Y, Z) / 24.61 (N) Protection : cadmiage passive vert * Jam nut receptacle with front release straight PC tails Layouts : 14.19 (N) / 16.26 (N) / 18.32 (N, X) / 20.41 (N, W, X, Y) / 22.55 (N, W, X, Y, Z) / 24.61 (N) Plating : passivated green cadmium Autres arrangements, nous consulter / Other layouts, please consult us 63 SN 946 SN 1167 SN 1206 SN 1277 SN 1533 SN 0378 64 851 Series - RJ45 Version Presentation / Presentation Le connecteur SOURIAU 851 RJ45 est une solution renforcee pour les applications de telechargement / chargement de donnees en environnements severes. Disponible en taille 18, ce connecteur existe en divers types de boitiers et avec differentes terminaisons: Fiche avec cordon RJ45, traversee de cloison ou a souder pour les embases a collerette carree et a fixation par ecrou. Les principaux avantages de ce produit : * Une solution Ethernet cat5e - 10 Base T, 100 Base TX, ou 1000 Base T * Excellente resistance aux impacts & aux chocs - Boitier renforce * Connexion facile, fiable & securisee * Ideal pour les applications interieures / exterieures - niveau d'etancheite IP67 SOURIAU 851 RJ45 connector is a ruggedized solution for downloading / uploading data applications in harsh environments. Available in shell size 18, this connector offers multiple configurations and terminations: Cable pig tail for plug, feed through and solder out for both square flange and jam nut receptacle. Main advantages of this product : * A cat5e Ethernet solution - 10 Base T, 100 Base TX, or 1000 Base T capable * High impact & shock resistance - Ruggedized housing * Easy, reliable & secure mating * Suitable for Indoor / Outdoor applications - IP67 sealing level 65 851 Series - RJ45 Version Caracteristiques techniques / Technical characteristics Mecaniques * Insert * Contacts Matieres * Boitier * Insert * Contacts Plating * Shell Alliage d'aluminium Thermoplastique Alliage cuivre * Contacts Protection * Boitier * Contacts Cadmie vert olive Oxydation anodique noire Nickele Or Mecanique * Selon MIL-DTL-26482, 500 manoeuvres Mechanical Material * Shell Aluminium alloy Thermoplastic Copper alloy Climatiques * Etancheite IP67 avec un bouchon * Temperature -40C a +85C * Resistance aux fluides : selon MIL-DTL-26482 avec un bouchon Olive drab cadmium Black anodized Nickel Gold Climatic Mechanical * per MIL-DTL-26482, 500 mating cycles * Sealing IP67 with protective cap * Temperature -40C to +85C * Fluid resistance : per MIL-DTL-26482 with protective cap Electriques 10 BaseT, 100 Base TX et 1000 BaseT Cat 5e selon TIA/EIA 568A/B Electrical 10 BaseT, 100 Base TX and 1000 BaseT Cat 5e per TIA/EIA 568A/B References / Ordering information Racine / Basic series Ruggedized Receptacle connectors 851 00 00 Type de boitier / Shell type 00 Embase a collerette carree (acceptant un raccord) Square flange receptacle (accepting backshell) 01 Prolongateur / Cable connecting receptacle 07 Embase a fixation par ecrou / Jam nut receptacle Type de raccord / Backshell type 00 Pas de raccord / no backshell RC Serre cables droit / Straight cable clamp RT Raccord droit pour gaine thermoretractable / Straight backshell for heat shrink tubing Taille de boitier / Shell size 8 RJ45 (size 18) Insert / Insert J RJ45 Arrangements / Layouts F Traversee de cloison / Feedthrough S A souder / Solder C Embase avec cordon RJ45 / Pig tail receptacle P Fiche avec cordon RJ45 / Pig tail plug Style de contact / Contact style S Embase / Receptacle P Fiche / Plug Orientation / Polarization N Normal W, X, Y, Z Autre orientations / Other polarizations Protection / Plating OD Protection vert olive cadmiee / Olive drab cadmium 031 Oxydation anodique noire / Black anodized 44 Nickele / Nicke Specification / Specification Nous consulter pour une configuration personnalisee / Consult factory for custom configuration 66 8 J C S N OD --- 851 Series - RJ45 Version Encombrements / Dimensions Embase RJ45 a collerette carree Square flange RJ45 feedthrough Shell type `A' `B' Aluminium 30.91 1.32 44.1 27.0 32.3 `A' PIN I `B' PIN I Embase RJ45 a fixation par ecrou Jam nut RJ45 feedthrough Shell type `A' `B' Aluminium 23.39 2.64 44.1 `A' `B' o 44.2 PIN I PIN I Embase RJ45 a collerette carree a souder Square flange RJ45 feedthrough solder out Shell type `A' `B' Aluminium 22.98 1.32 `A' 32.3 30.8 `B' PIN I 27.0 10.7 o 1.4 Note : toutes les dimensions sont en mm / all dimensions are in mm 67 851 Series - RJ45 Version Embase RJ45 a fixation par ecrou a souder Jam nut RJ45 feedthrough solder out Shell type `A' `B' Aluminium 15.27 2.64 `A' `B' 24.6 o 44.2 PIN I 10.7 o 1.4 Embase a collerette carree avec cordon RJ45 Square flange RJ45 feedthrough Pig tail Shell type `A' `B' `C' Aluminium 30.91 1.32 304.825.4 `C'* Livree en standard avec un cable de dimension `C' Come with a cable - dimension `C' - in standard. `A' 25.4 `B' PIN I 25.4 End `B' PIN I End `A' Embase a fixation par ecrou avec cordon RJ45 Jam nut RJ45 feedthrough Pig tail Shell type Aluminium `A' 23.39 `B' 2.64 Livree en standard avec un cable de dimension `C' Come with a cable - dimension `C' - in standard. `C' 304.8 25.4 PIN I `C'* `A' `B' 25.4 25.4 End `B' PIN I End `A' Percage de cloison / Panel cut-out Embase a collerette carree / Square flange receptacle Embase a fixation par ecrou / Jam nut receptacle o 32.1 4 x 2.5 27.9 30.55 o 30.5 Rear mounting Epaisseur maximum du panneau : 0.41mm min / 3.18 mm max Maximum panel thickness : 0.41 mm min / 3.18 mm max Epaisseur maximum du panneau : 4.75 mm Maximum panel thickness : 4.75 mm Note : toutes les dimensions sont en mm / all dimensions are in mm * Longueur du cable mesuree a partir de l'avant de la collerette / Cable length is measured from the front face of the flange. 68 851 Series - USB Version Presentation / Presentation Le connecteur SOURIAU 851 USB est une solution renforcee pour les applications de telechargement / chargement de donnees en environnements severes. Disponible en taille 16, ce connecteur existe en divers types de boitiers et avec differentes terminaisons: Fiche avec cordon USB, traversee de cloison ou a souder pour les embases a collerette carree et a fixation par ecrou. Les principaux avantages de ce produit : * Excellente resistance aux impacts & aux chocs - Boitier renforce * Connexion facile, fiable & securisee * Ideal pour les applications interieures / exterieures - niveau d'etancheite IP67 SOURIAU 851 USB connector is a ruggedized solution for downloading / uploading data applications in harsh environments. Available in shell size 16, this connector offers multiple configurations and terminations: Cable pig tail for plug, feed through and solder out for both square flange and jam nut receptacle. Main advantages of this product : * High impact & shock resistance - Ruggedized housing * Easy, reliable & secure mating * Suitable for Indoor / Outdoor applications - IP67 sealing level 69 851 Series - USB Version Caracteristiques techniques / Technical characteristics Mecaniques * Insert * Contacts Matieres * Boitier * Insert * Contacts Plating * Shell Alliage d'aluminium Thermoplastique Alliage cuivre * Contacts Protection * Boitier * Contacts Cadmie vert olive Oxydation anodique noire Nickele Or Mecanique * Selon MIL-C-26484, 500 manoeuvres Mechanical Material * Shell Aluminium alloy Thermoplastic Copper alloy Climatiques * Etancheite IP67 avec bouchon * Temperature de -40C a +85C * Resistance aux fluides : selon MIL-C-26484 avec bouchon Olive drab cadmium Black anodized Nickel Gold Climatic Mechanical * per MIL-C-26484, 500 mating cycles * Sealing IP67 with protective cap * Temperature range : -40C to +85C * Fluid resistance : per MIL-C-26484 with protective cap Electriques 10 BaseT, 100 Base TX Cat 5e selon TIA/EIA 568A/B Electrical 10 BaseT, 100 Base TX Cat 5e per TIA/EIA 568A/B References / Ordering information Racine / Basic series Ruggedized Receptacle connectors 851 00 00 Type de boitier / Shell type 00 Embase a collerette carree (acceptant un raccord) Square flange receptacle (accepting backshell) 01 Prolongateur / Cable connecting receptacle 07 Embase a fixation par ecrou / Jam nut receptacle 06 Fiche (acceptant un raccord) / Plug (accepting backshell) Type de raccord / Backshell type 00 Pas de raccord / no backshell RC Serre cables droit / Straight cable clamp RT Raccord droit pour gaine thermoretractable / Straight backshell for heat shrink tubing Taille de boitier / Shell size USB (size 16) 6 Insert / Insert A USB Type A B USB Type B Arrangements / Layouts F Traversee de cloison / Feedthrough S A souder / Solder C Embase avec cordon USB / Pig tail receptacle P Fiche avec cordon USB / Pig tail plug Style de contact / Contacts style S Embase / Receptacle P Fiche / Plug Orientation / Polarization N Normal W, X, Y, Z autres orientations / other polarizations Protection / Plating Protection vert olive cadmiee / Olive drab cadmium OD 031 Oxydation anodique noire / Black anodized Nickele / Nickel 44 Specification / Specification Nous consulter pour une configuration personnalisee / Consult factory for custom configuration 70 6 A C S N OD --- 851 Series - USB Version Encombrements / Dimensions Fiche avec cordon USB USB cable plug La fiche USB standard est livree avec un cable de dimesion `A'. Standard USB plug come with a cable - dimension `A'. Shell type `A' Aluminium 304.8 `A' Master key 12.76.35 PIN I 50.8 38.2 65.5 USB-A plug USB-A receptacle Embase USB a collerette carree Square flange USB feedthrough Shell type `A' `B' Aluminium 24.82 1.32 37.8 `A' 24.6 30.9 `B' PIN I PIN I Embase USB a fixation par ecrou Jam nut USB feedthrough Shell type `A' `B' Aluminium 17.30 2.64 37.8 `A' `B' o 41.0 PIN I PIN I Embase USB a collerette carree a souder Square flange USB feedthrough solder out Shell type `A' `B' Aluminium 15.16 1.32 `A' 24.6 24.5 `B' PIN I 10.7 30.9 o 1.6 Note : toutes les dimensions sont en mm / all dimensions are in mm 71 851 Series - USB Version Embase USB a fixation par ecrou a souder Jam nut USB feedthrough solder out Shell type `A' `B' Aluminium 7.65 2.64 `A' `B' o 41.0 PIN I 18.3 10.7 Embase a collerette carree avec cordon USB Square flange USB feedthrough Pig tail Shell type Aluminium `A' 24.82 `B' 1.32 Livree en standard avec un cable de dimension `C' Come with a cable - dimension `C' - in standard. `C' 304.8 PIN I 25.4 `C'* 24.6 `A' `B' 30.9 25.4 25.4 PIN I Embase a fixation par ecrou avec cordon USB Jam nut USB feedthrough Pig tail PIN I Livree en standard avec un cable de dimension `C' Come with a cable - dimension `C' - in standard. Shell type `A' `B' `C' Aluminium 17.30 2.64 304.825.4 `C'* `A' `B' 25.4 25.4 o 41.0 PIN I Percage de cloison / Panel cut-out Embase a collerette carree / Square flange receptacle o 28.45 Embase a fixation par ecrou / Jam nut receptacle o 32.1 o 4 x 3.15 30.4 24.6 Panel mounting Epaisseur maximum du panneau / Maximum panel thickness : - Montage par l'avant / Front mounting: 3.20 mm - Montage par l'arriere / Rear mounting : 2.49 mm Epaisseur maximum du panneau : 3.20 mm Maximum panel thickness : 2.49 mm Note : toutes les dimensions sont en mm / all dimensions are in mm * Longueur du cable mesuree a partir de l'avant de la collerette / Cable length is measured from the front face of the flange. 72 8XE Series Presentation / Presentation SOURIAU overmolded 851 connector utilises high impact glass filled plastic offering a great impact & shock resistance as well as an ergonomic shape of the coupling ring. Le connecteur 851 surmoule SOURIAU est en plastique, charge verre, haute performance offrant une excellente resistance aux impacts & chocs ainsi qu'une forme ergonomique de la bague de verrouillage. Suitable backshell in same plastic material allows IP68 sealing level. Le raccord, utilisant la meme matiere plastique permet d'obtenir un niveau d'etancheite IP68. * High impact & shock resistance (drop & crush resistance * Easy, reliable & secure mating * Excellent sealing performance : IP68 (120 hours under 15 m water ) /IP69K * High salt spray resistance * Enhanced cable sealing * Intermateable & interchangeable with MIL-DTL-26482 * Design flexibility * Excellente resistance aux impacts & aux chocs (aux chutes & a l'ecrasement) * Connexion facile, fiable & securisee * Excellentes performances d'etancheite IP68 (120 heures sous 15 m d'eau) / IP69K * Excellente resistance au brouillard salin * Excellente etancheite sur le cable * Intermariable & interchangeable avec les connecteurs MIL-DTL-26482 * Flexibilite de configuration 73 8XE Series Caracteristiques techniques / Technical characteristics Mecaniques Electriques Climatic Endurance 500 manoeuvres min. Alliage d'aluminium - anodise dur Boitier Elastomer neoprene Insert Alliage de cuivre - protection or Contacts Enveloppe exterieure Plastique charge verre haute resistance * Joint bague de verrouillage Teflon sur silicone * * * * * Working temperature -55C to +125C * Sealing Interfacial IP68 (up to 120 hours under 15 meters of water) * Resistance to chemicals in accordance with MIL-DTL-26482 Series 1 * * * * * Mechanical * * * * * * Durability 500 mating min. Aluminium alloy - hard anodized Shell Neoprene elastomer Insert Copper alloy with gold plating Contacts High impact glass filled plastic Housing Coupling ring seal Teflon over silicone Resistance d'isolement 5000 M Tension de tenue 2300 V Resistance contact 3 M Intensite admissible par contact Taille16 : 13 A / Taille 20 : 7.5 A Electrical Acceptance cables * * * * * Cable Gauge 14 max. * Diametre gaine exterieure: Toutes tailles jusqu'a 11.17 mm Insulation resistance 5000 M Dielectric withstanding voltage 2300 V Contact resistance 3 M Current rating per contact Size 16: 13 A / Size 20: 7.5 A Cable acceptance Climatiques * Primaries wire Gauge 14 max. * Outer jacket all popular sizes up to 11.17 mm * Temperature d'utilisation -55C a +125C * Etancheite Interface IP68 (jusqu'a 120 heures sous 15 metres d'eau) * Resistance aux produits chimiques selon MIL-DTL-26482 Serie 1 References / Ordering information Racine / Basic series Connecteur pour environnment EXTREME connector for EXTREME environment 8XE 06 - 16 8 P - Type de boitier / Connector type 01 Prolongateur / Cable connecting receptacle 06 Fiche / Plug Type de contact / Contact type Pas de digit / No digit a souder / to solder R a sertir / to crimp Taille de boitier / Shell size 10, 12, 14, 16, 20, 22 Arrangements / Layouts Voir page suivante / See next page Sexe du contact / Contact gender P Male / male S Femelle / female Orientations / Insert orientations Pas de digit / No digit Normal (n'apparait pas dans le reference) / Standard (not included in part number) W, X, Y, Z autres orientations / other orientations Couleur / Color Pas de digit / No digit Gris / Mink (standard) BL Bleu / Blue YE Jaune / Yellow Autres couleurs disponibles / Others available RE Rouge / Red Specification / Design variation V7 Boitier renforce en taille 16 & 20 (pour prolongateur) / ruggedized shells in size 16 & 20 (for cable connecting receptacle) V8 Boitier renforce en taille 16 & 20 (pour fiche) / ruggedized shells in size 16 & 20 (for plug) AA Boitier inox renforce en taille 16 & 20 (O cable 8 mm) / ruggedized stainless steel shells in size 16 & 20 (cable O 8 mm) Diametre du cable / Cable diameter Personnalisation possible / Custom available 74 BL V8 --- 8XE Series Arrangements / Contact layouts Vue de face avant isolant male / Viewed from front face of male insulator 10 6 7 6 O 1 (#20) 7 O 1 (#20) 12 98 6 O 1 (#20) 2 3 8 10 14 2 O 1.6 (#16) 3 O 1.6 (#16) 8 O 1 (#20) 10 O 1 (#20) 14 O 1 (#20) 16 14 5 12 15 18 19 8 23 26 5 O 1.6 (#16) 8 O 1 (#20) 4 O 1.6 (#16) 14 O 1 (#20) 1 O 1.6 (#16) 18 O 1 (#20) 19 O 1 (#20) 8 O 1.6 (#16) 22 O 1 (#20) 1 O 1.6 (#16) 26 O 1 (#20) 20 16 24 25 27 39 41 16 O 1.6 (#16) 24 O 1 (#20) 25 O 1 (#20) 27 O 1 (#20) 37 O 1 (#20) 2 O 1.6 (#1.6) 41 O 1 (#20) 22 21 32 34 36 55 21 O 1.6 (#16) 32 O 1 (#20) 34 O 1 (#20) 36 O 1 (#20) 55 O 1 (#20) 75 8XE Series Orientations Shell sizes W Normal 10 12 X Y 14 16 Z 20 22 Viewed from front face of male insulator (receptacle or plug) Angle in degrees Layouts W X Y 6 90 - - Z - 7* 90 - - - 98 90 180 240 270 3 - - 180 - 8 90 112 203 292 10 60 155 270 295 2 - - - - 14* 45 273 5 40 92 184 12 43 90 - - 15 17 110 155 234 270 18 15 90 180 19 30 165 315 - 8 54 152 180 331 23 158 270 - - 26 60 - 275 338 16 238 318 333 347 39 63 144 252 333 41 45 126 225 - 24 70 145 215 290 25 72 144 216 288 27 72 144 216 288 21 16 135 175 349 36 72 144 216 288 55 30 142 226 314 32 72 145 215 288 34 62 142 218 298 * 10-7 & 12-14 layouts, W non standard orientation Encombrements / Dimensions Fiche / Plug C OA B Note : toutes les dimensions sont en mm / all dimensions are in mm 76 Shell sizes OA B C 10 24.9 51.2 104.5 12 27.9 51.2 103.7 14 33.0 57.6 110.8 16 36.2 63.9 122.2 20 43.7 108.4 197.1 22 48.8 91.4 184.1 16 specif.V8 41.9 83.4 172 20 specif. V8 47 91.4 184.2 851 Series Cadmium free plating Protection non cadmiee SOURIAU propose des connecteurs 851 avec une protection noire non cadmiee. Cette protection zinc-nickel a ete developpee pour repondre aux nouvelles exigences en matiere de respect de l'environnement (directive Europeenne 76/769 EEC). SOURIAU propose a 851 connector with cadmium free plating black. This zinc-nickel plating has been introduced in accordance with European Health and Safety requirements (European directive 76/769 EEC). Reason: Raison : * Reduction in level of heavy metal pollutants produced by * Reduire le niveau de pollution par metaux lourds produit par le cadmium cadmium. * Reduction in health associated with the corrosive by products of cadmium. * Reduire les risques de sante engendres par les produits cadmies. Characteristics : Caracteristiques : * Mechanical - shell: aluminium alloy - plating : zinc-nickel * Mecaniques - boitiers : aluminium - protection : zinc-nickel * Electrical (1) - shell continuity: 5 m * Electriques (1) - continuite electrique des boitiers : 5 m * Climatic - salt spray: 500 hours * Climatiques - tenue au brouillard salin : 500 heures Part numbers: Examples* : * Solder version 851 00 E 8-3A P.54 zinc-nickel plating * Crimp version 851 00 R 8-3A P.54 zinc-nickel plating References : Exemples* : * Version a souder 851 00 E 8-3A P.54 protection zinc-nickel * Version a sertir 851 00 R 8-3A P.54 protection zinc-nickel * See part numbers system - page 11 (solder and crimp version) - page 13 (straight PC tails and wire-wrap versions) * Voir systeme de reference - page 11 (version a souder et a sertir) - page 13 (version a picots et connexions enroulees) This plating is available for shell type : - Cette protection est disponible pour les boitiers de type : - 00: 02: 07: 07A: 01: 06: 36: embase a collerette carree avec possibilite de raccord embase a collerette carree sans possibilite de raccord embase a fixation par ecrou avec possibilite de raccord embase a fixation par ecrou sans possibilite de raccord prolongateur fiche droite sans bague de blindage fiche droite avec bague de blindage 00: 02: 07: 07A: 01: 06: 36: square flange receptacle accepting backshells square flange receptacle not accepting backshells jam nut receptacle accepting backshells jam nut receptacle not accepting backshells cable connecting receptacle plug for use without straight backshell screened plug for use with straight backshells Backshells, please consult us. Raccords, nous consulter. 1 : Embase accouplee sur fiche type 36 - Receptacle mated on type 36 plug 77 78 www.souriau.com www.souriau-industrial.com contactindustry@souriau.com (c) IND851CA04ENFR (c) Copyright SOURIAU May 2011 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. www.souriau.com