Z300-C www.vishay.com Vishay Draloric High Surge Axial Cemented Wirewound Resistors FEATURES * Standard version Z300-C00 * High voltage surge (up to 12 kV) for special version * Non flammable cement coating * High grade ceramic core * Compliant to RoHS Directive 2002/95/EC Note ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 APPLICATIONS * Energy meter * Appliances * Ballast STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P40 W RESISTANCE RANGE TCR (2) = - 10 ppm/K to - 80 ppm/K WM 50 (Class 1) RESISTANCE RANGE TCR (2) = 100 ppm/K to 180 ppm/K WM 110 (Class 3) TOLERANCE (1) % Z301 1 0.30 to 270 0.68 to 2K 10, 5 ZDA0411 2 0.47 to 560 1.50 to 4.30K 10, 5 0.10 to 510 1.80 to 3.30K 10 0.10 to 510 24 to 3.30K 5 1 to 510 - 1 0.10 to 1K 1.80 to 3.90K 10 0.10 to 1K 12 to 3.90K 5 1 to 1K - 1 0.10 to 910 10 to 5.6K 5 0.10 to 2.4K 3.90 to 10K 10 0.10 to 2.4K 10 to 10K 5 0.62 to 2.4K - 1 MODEL Z302 Z303 Z304 Z305 3 4 5 6 Notes (1) Resistance value to be selected for 10 % tolerance from E12 and for 1 % and 5 % from E24 (2) TCR mentioned is of resistive wire Revision: 17-Nov-11 Document Number: 21027 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Z300-C www.vishay.com Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION Part Number: Z34081834700J6DC10 Z 3 4 0 8 1 8 3 4 7 MODEL TCR/MATERIAL VALUE Z310309 = Z301 ZDA0411 = ZDA0411 Z320414 = Z302 Z330617 = Z303 Z340818 = Z304 Z350922 = Z305 1 = - 10 ppm/K to - 80 ppm/K WM 50 Class 1 3 = 100 ppm/K to 180 ppm/K WM 110 Class 3 4 = SWI (special winding) 3 digit value 1 digit multiplier MULTIPLIER F = *10-4 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 0 0 J 6 D C 1 0 TOLERANCE CODE PACKAGING CODE SPECIAL (1) F = 1.0 % G = 2.0 % J = 5.0 % K = 10.0 % (See Packaging Table) C00 = Standard C04 = 4 kV surge C06 = 6 kV surge C08 = 8 kV surge C10 = 10 kV surge C12 = 12 kV surge Product Description: Z304-C10 3 470R 5 % AC G63 CD1278 Z303-C10 3 470R 5% AC G63 CD1278 MODEL TCR/MATERIAL VALUE TOLERANCE CODE PACKAGING DESCRIPTION Blank = Standard CDxxxx = Speciality Note (1) As surge handling capacity depends upon resistor model and ohmic value, please check feasibility of resistor model, ohmic value and desired surge handling voltage with factory. (ww1resistors@vishay.com) PACKAGING TABLE AMMO PACK MODEL Z301, ZDA0411 Z302 TAPE LENGTH (G) (mm) PIECES PACKAGING CODE PACKAGING DESCRIPTION 53 1000 21 A1 G53 53 500 2C AC G53 73 500 4C AC G73 83 500 6C AC G83 53 500 2C AC G53 83 500 6C AC G83 63 250 6D AC G63 83 250 6B AB G83 83 100 6A A4 G83 Z303 Z304 Z305 Revision: 17-Nov-11 Document Number: 21027 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Z300-C www.vishay.com Vishay Draloric DIMENSIONS G B A X C DIMENSIONS in millimeters (inches) MODEL BMAX. CMAX. G XMAX. MASS (g) Z301 8.5 (0.355) 3 (0.118) 0.7 (0.027) 53 1 (2.087 0.039) 2 (0.079) 0.5 ZDA0411 11 (0.433) 4 (0.157) 0.7 (0.027) 53 1 (2.087 0.039) 2 (0.079) 0.8 Z302 13 (0.512) 4.8 (0.189) 0.8 (0.031) 53 1 (2.087 0.039) 73 1 (2.87 0.039) 83 1 (3.268 0.039) 2 (0.079) 1.1 Z303 15.8 (0.622) 5.5 (0.217) 0.8 (0.031) 53 1 (2.087 0.039) 83 1 (3.268 0.039) 3 (0.118) 1.4 Z304 18 (0.709) 7.5 (0.295) 0.8 (0.031) 63 1 (2.48 0.039) 3 (0.118) 1.9 Z305 22.3 (0.878) 8.7 (0.343) 0.8 (0.031) 83 1 (3.268 0.039) 3 (0.118) 3.7 120 TEMPERATURE RISE IN K RATED POWER IN % AMAX. 100 80 60 40 300 ZDA 0411 200 Z301 100 20 0 - 50 150 50 40 - 55 250 0 350 300 Z302 Z303 200 100 0 1.6 2.0 1 2 3 4 5 300 Z304 Z305 200 100 0 0 2 POWER IN W Temperature Rise Revision: 17-Nov-11 1.2 Temperature Rise TEMPERATURE RISE IN K TEMPERATURE RISE IN K 0.8 0.4 POWER IN W Derating 0 0 AMBIENT TEMPERATURE IN C 4 6 POWER IN W Temperature Rise Document Number: 21027 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Z300-C www.vishay.com Vishay Draloric HIGH VOLTAGE SURGE The specially designed Z300-C high surge wirewound resistors are tested for surge handling capability by applying surge voltageas per the 1.2 s/50 s exponential open circuit voltage waveform according to IEC 61000-4-5 standard as shown below: U (% pulse voltage) 1.0 0.9 B 0.5 0.3 0.1 0.0 O1 T2 A T T1 t 30 % max. { Front time: T1 = 1.67 x T = 1.2 s 30 % Time to half-value: T2 = 50 s 20 % Waveform of open-circuit voltage (1.2 s/50 s) at the output of pulse generator PERFORMANCE TEST Climatic category (LCT/UCT/days) PERMISSIBLE CHANGE 40/200/56 Damp heat, steady state, IEC 60115-1, 4.24 (40 2) C, 56 days, (93 3) % RH R = (3 % R + 0.1 ) Climatic sequence IEC 60115-1 4.23 R = (3 % R + 0.1 ) Endurance at room temperature (116 % P70), 1000 h, IEC 60115-1, 4.25.2 R = (3 % R + 0.1 ) Endurance at UCT, 200 C (30 % P70), 1000 h, IEC 60115-1, 4.25.3 R = (3 % R + 0.1 ) Short time overload, IEC 60115-1, 4.13 10 x rated power P25 for 5 s R = (2 % R + 0.05 ) Resistance to soldering heat, IEC 60115-1, 4.18 (260 5) C, (10 1) s R = (1 % R + 0.05 ) Robustness of termination, IEC 60115-1, 4.16 Revision: 17-Nov-11 R = (0.5 % R + 0.05 ) Document Number: 21027 4 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1