VOIDLESS HERMETICALLY SEALED
ULTRA FAST RECOVERY GLASS
P
O
WER RE
C
TIFIER
S
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright © 2007
10-03-2007 REV B
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6073 thru 1N6081
1N6073 thru 1N6081
DESCRIPTION APPEARANCE
This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-
19500/503 and is ideal for high-reliability applications where a failure cannot be
tolerated. These industr y-rec ognized 3, 6, a nd 12 Am p rat ed r ectifiers (TL =70ºC) in
different package sizes for working peak reverse voltages from 50 to 150 volts are
hermetically sealed with voidless-glass construction using an internal “Category I”
metallurgical bond. These devices are also available in surface mount MELF
package configurations by adding a “US” suffix (see separate data sheet for
1N6073US thru 1N6081US). Microsemi also offers numerous other rectifier
products to meet higher and lo wer current ratings with various recovery time spee d
requirements including stand ard, fast and u ltrafast device types in both through-ho le
and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLIC ATIONS / BENEFITS
• Popular JEDEC registered 1N6073 to 1N6081 series
• Voidless hermetically s ealed glass package
• Extremely robust construction
• Triple-layer passivation
• Internal “Category I” Metallurgical bonds
• JAN, JANTX, and JANTXV available for 1N6074 and
1N6075 per MIL-PRF-19500/503
• Further options for screening in accordance with MIL-
PRF-19500 for JAN, JANTX, JANTXV, or JANS by
using a MQ, MX, MV or SP prefix respectively , e.g.
MX6076, MV6079, SP6081, etc.
• Surface mount equivalents also avai lable in a square
end-cap MELF configuration with “US” suffix
• Ultrafast recovery rectifier series 50 to 150 V
• Military and other high-reliability applications
• Switching power supplies or other applications
requiring extremely fast switching & low forward
loss
• High forward surge current capability
• Low thermal resistance
• Controlled avalanche with peak reverse power
capability
• Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RAT ING S MECHANICAL AND PACKAGING
• Junction Temperature: -65oC to +155oC
• Storage Temperature: -65oC to +155oC
• Peak Forward Surge Current @ 25oC: 35 Amps for
1N6073-6075, 75 Amps for 1N60 76-6078, and 175
Amps for 1N6079-6081 at 8.3 ms half-sine wave
• Average Rectified For ward Current (IO) at TL= +70oC
(L= 0 inch from body):
1N6073 thru 1N6075: 3.0 Amps
1N6076 thru 1N6078: 6.0 Amps
1N6079 thru 1N6081: 12.0 Amps
Average Rectified For ward Current (IO) at TA=55oC:
1N6073 thru 1N6075: 0.85 Amps
1N6076 thru 1N6078: 1.3 Amps
1N6079 thru 1N6081: 2.0 Amps
• Thermal Resistance L= 0 inch (RθJL): 13oC/W for
1N6073-6075, 8.5oC/W for 1N6076-6078, and
5.0oC/W for 1N6079-6081
• Solder temperature: 260oC for 10 s (maximum)
• CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
• TERMINATIONS: Axial-leads are Copper with
Tin/Lead (Sn/Pb) finish
• MARKING: Body painted and part number, etc.
• POLARITY: Cathode indicated by band
• Tape & Reel option: Standard per EIA-296
• Weight: 1N6073 thru 1N6075: 340 mg
1N6076 thru 1N6078: 750 mg
1N6079 thru 1N6081: 1270 mg
• See package dimensions on l ast page
VOIDLESS HERMETICALLY SEALED
ULTRA FAST RECOVERY GLASS
P
O
WER RE
C
TIFIER
S
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6073 thru 1N6081
1N6073 thru 1N6081
ELECTRICAL CHARACTERISTICS @ 25oC unless otherwise specified
MAXIMUM
FORWARD
VOLTAGE
(PULSED)
PULSED
TEST
CURRENT
TYPE
WORKING
PEAK
REVERSE
VOLTAGE
VRWM VF @ IF
AVERAGE
RECTIFIED
CURRENT IO
@ TL = 70ºC
AVERAGE
RECTIFIED
CURRENT IO
@ TA = 55ºC
MAXIMUM
REVERSE
CURRENT
IR @ VRWM
MAXIMUM
REVERSE
RECOVERY
TIME*
trr
MAXIMUM
SURGE
CURRENT
IFSM
VOLTS VOLTS AMPS AMPS AMPS
μA ns AMPS
1N6073 50 2.04 9.4 3.0 0.85 1.0 30 35
1N6074 100 2.04 9.4 3.0 0.85 1.0 30 35
1N6075 150 2.04 9.4 3.0 0.85 1.0 30 35
1N6076 50 1.76 18.8 6.0 1.3 5.0 30 75
1N6077 100 1.76 18.8 6.0 1.3 5.0 30 75
1N6078 150 1.76 18.8 6.0 1.3 5.0 30 75
1N6079 50 1.50 37.7 12.0 2.0 10.0 30 175
1N6080 100 1.50 37.7 12.0 2.0 10.0 30 175
1N6081 150 1.50 37.7 12.0 2.0 10.0 30 175
*NOTE: IF = 0.5 A, IRM = 1.0 A, and IR(REC) = 0.25 A
SYMBOLS & DEFINITI ONS
Symbol Definition
VBR Minimum Breakdown Voltage: The minimu m voltage the device will exhibit at a specifie d current.
VRWM Working Peak Reverse Voltage: The maximum peak vo ltage that can be applied over the operating
temperature range.
VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current.
IR Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and
temperature.
trr Reverse Recovery Time: The time interval between the instant the current passes through zero when
changing from the forward direction to the reverse direction and a specified recovery decay point after a peak
reverse current is reached.
GRAPHS
MAXIMUM POWER DISSIPATION IN WATTS
MAXIMUM POWER DISSIPATION IN WATTS
MAXIMUM POWER DISSIPATION IN WATTS
FIGURE 1 FIGURE 2 FIGURE 3
Maximum power in watts vs lead temperature Maximum power in watts vs lead temperature Maximum power in watts vs lead temperature
For 1N6079, 1N6080 and 1N6081 for 1N6076, 1N6077 and 1N6078 for 1N6073, 1N6074 and 1N6075
Maximum lead temperature in oC (TL) at point “L” from body (for maximum operating junction temperature with equal two-lead conditions).
Microsemi
Scottsdale Division Page 2
Copyright © 2007
10-03-2007 REV B 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1 503
VOIDLESS HERMETICALLY SEALED
ULTRA FAST RECOVERY GLASS
P
O
WER RE
C
TIFIER
S
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
WWW.Microsemi .COM
SCOTTSDALE DIVISION
1N6073 thru 1N6081
1N6073 thru 1N6081
Lead Length RθJL Lead Length RθJL Lead Length RθJL
INCHES (mm) OC/W INCHES (mm)
OC/W INCHES (mm)
OC/W
0.000
0.125 (3.17)
0.250 (6.35)
0.375 (9.53)
0.500 (12.70)
0.750 (19.05)
5.0
11.5
17.5
23.5
29.0
40.0
0.000
0.125 (3.17)
0.250 (6.35)
0.375 (9.53)
0.500 (12.70)
0.750 (19.05)
8.5
14.0
19.5
25.0
30.0
40.0
0.000
0.125 (3.17)
0.250 (6.35)
0.375 (9.53)
0.500 (12.70)
0.750 (19.05)
13
24
35
46
54
70
1N6079, 1N6080 and 1N6081 1N6076, 1N6077 and 1N6078 1N6073, 1N6074 and 1N6075
NOTES:
1. Dimensions are in inches
2. Metric equivalents (to the nearest .01mm) are given for general information only and are based upon 1 inch = 25.4 mm.
PACKAGE DIMEN SIONS
PACKAGE A (1N6073-75)
NOTE: Lead diameter tolerance = +0.003/-0.004 inches
PACKAGE E (1N6076-78)
NOTE: Lead diameter tolerance = +0.002/-0.003 inches
PACKAGE G (1N6079-81)
NOTE: Lead diameter tolerance = +0.002/-0.003 inches
Copyright © 2007
10-03-2007 REV B
