1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided by the connector itself). The CCM04 low profile without card guidance is dedicated to applications where the overall height of the connector is paramount. A range of low profile CCM04 connectors are available with 1.25 mm thick moldings. The wide choice of contact configurations and molding heights suit a broad range of applications. Construction Contacts Plating Copper alloy Contact area : Gold alloy inlay Terminals : Tin lead (2 min) High temp. thermoplastic UL 94V-0 rated Moldings Mechanical data Number of Contacts Mechanical life Durability of inlay Contact force Card detection switch actuation force Features Vibration 50m/s2 * Available in a variety of molding heights from 1.25 mm to 5 mm. Shock * The integrated card detection switch (optional) is sealed against dust and grit. * By using an inlay finish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. * The height of the contact above the insulator is 0.75 mm, so allowing a wider tolerance for the card entry slot. * The contact area is spooned to reduce the risk of accidental (or deliberate) damage, and to optimize the electrical connection with the card. * The tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted. * The contact design ensures a consistent and reliable contact force over the life of the connector. * Robustly formed printed circuit tails are well protected by the insulator body: a coplanarity of 0.05 mm is guaranteed. Electrical data Insulation resistance Contact resistance max Switching current Dielectric strength Card detection switch Switch contact resistance Dielectric switch contacts Maximum switch power Environmental data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch 6, 8 or 16 50,000 cycles min 5,000 cycles min (see note 1) 0.25 N min / 0.5 N max 0.8 N max for actuation (end travel switch actuates when card is 0.9 mm from card stop) 1.8 N max for complete depression Frequency 10 to 500 Hz. Acceleration Duration 6 hours - amplitude 0.35 mm Max electrical discontinuity 1s Peak value 500 m/s2 - Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 s 1,000 M min 100 m max 10 A min / 1 A max 750 Vrms min Normally open (closes on card insertion) 100m max 250 Vrms min 0.2 VA -40C to +85C Temperature/time profile acc. to CECC00802 para. 6.1, Fig. 3 with peak temperature 250C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed IP 54 For CCM04 1889 & 1905 Sealed against dust for other versions Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is intended to represent worst case. * The moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes. * With tape and reel packaging as standard, the connectors are designed to be automatically picked & placed. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 43 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 46 CCM04 MKII Ordering code Molding Height 1.25 mm 1.25 mm 2.00 mm 2.75 mm 2.75 mm 3.50 mm 4.25 mm 5.00 mm SMT Tails Standard Straight Standard Straight Standard Standard Standard Standard Without Switch 2 x 3 contacts 2 x 4 contacts CCM04-1801 CCM04-1814 CCM04-1800* CCM04-1813* CCM04-5004** CCM04-1415* CCM04-1200 CCM04-1217* CCM04-1201 CCM04-1218 CCM04-1202 CCM04-1219* CCM04-1203* CCM04-1220 CCM04-1221 With Switch 2 x 4 contacts 2 x 8 contacts CCM04-1889 CCM04-1905 CCM04-1888* CCM04-1316 CCM04-1317 CCM04-1318 CCM04-1319* CCM04-1320 CCM04-1333* CCM04-1334 *Note: On request **Note: Replaced by CCM04-5102 (see page 53) Packaging Connectors without a switch are packaged in accordance with EIA 481-2 or IEC 286-3. Connectors with a switch are packaged in accordance with EIA 481-3 or IEC 286-3 Standard packaging is in tape and reel. A modification code is added to the part number that indicates reel packaging and the number of components per reel (which varies according to the molding height). Example: A CCM04 with 8 contacts plus switch and a molding height of 3.50 mm has a part number CCM04-1318-R751. Molding Height SMT Tails 1.25 mm 1.25 mm 2.00 mm 2.75 mm 2.75 mm 3.50 mm 4.25 mm 5.00 mm Standard Straight Standard Straight Standard Standard Standard Standard Without Switch 2x3 2x4 contacts contacts R182 (1800pcs) R132 (1300pcs) R182 (1800pcs) R132 (1300pcs) R122 (1200pcs) R901 (900pcs) R122 (1200pcs) R901 (900pcs) R122 (1200pcs) R901 (900pcs) R112 (1100pcs) R801 (800pcs) R951 (950pcs) R701 (700pcs) R651 (650pcs) With Switch 2x4 2x8 contacts contacts R102 (1000pcs) R651 (650pcs) R102 (1000pcs) R801 (800pcs) R801 (800pcs) R751 (750pcs) R651 (650pcs) R601 (600pcs) R451 (450pcs) R451 (450pcs) N reels per box 5 5 5 5 5 5 5 5 R = Reel Reel Diameter 360 mm Reel Width 24.4 mm X 344 mm Y 350 mm Z 152 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 44 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 47 CCM04 MK II Low Profile Dimensional Drawings CCM04-1801 2 x 3 contacts CCM04-1801 PCB Layout CCM04-1814 2 x 4 contacts CCM04-1814 PCB layout CCM04-1889 2 x 4 contacts + switch CCM04-1889 PCB Layout Unless otherwise stated, tolerances are 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 45 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 48 CCM04 MK II Low Profile Dimensional Drawings CCM04-1905 2 x 8 contacts PCB Layout CCM04-1905 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 46 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 49 CCM04 MK II Dimensional Drawings CCM04-1200 2x3 contacts straight surface mount CCM04-1200 PCB Layout PCB Configuration 1 PCB Configuration 2 CCM04-1316 2 x 4 contacts straight surface mount CCM04-1316 PCB Layout PCB Configuration 1 CCM04-1218/1219/1220/1221/1415 2x4 contacts CCM04-1415 CCM04-1218 CCM04-1219 CCM04-1220 CCM04-1221 CCM04-1218/1219/1220/1221/1415 PCB Layout A = 2mm A = 2.75 A = 3.50 A = 4.25 A = 5.00 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 47 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 50 CCM04 MK II Dimensional Drawings CCM04-1317/1318/1319/1320 2 x4 contacts plus switch CCM04-1317 CCM04-1318 CCM04-1319 CCM04-1320 CCM04-1317/1318/1319/1320 PCB Layout A = 2.75 A = 3.50 A = 4.25 A = 5.00 Unless otherwise stated, tolerances are 0.10 mm CCM04-1334 2 x 8 contacts standard surface mount CCM04-1334 PCB Layout CCM04-5004/1201/1202/1203/1204 2x3 contacts standard surface mount CCM04-5004* CCM04-1201 CCM04-1202 CCM04-1203 CCM04-1204 CCM04-5004*/1201/1202/1203/1204 PCB Layout A = 2.75 A = 3.50 A = 4.25 A = 5.00 *CCM04-5004 replaced by CCM04-5102 (see page 53) Unless otherwise stated, tolerances are 0.10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com/ccm 48