NDS9948 Dual 60V P-Channel PowerTrench MOSFET General Description Features This P-Channel MOSFET is a rugged gate version of Fairchild Semiconductor's advanced PowerTrench process. It has been optimized for power management applications requiring a wide range of gate drive voltage ratings (4.5V - 20V). * -2.3 A, -60 V Applications * Fast switching speed * * * * High performance trench technology for extremely low RDS(ON) * Low gate charge (9nC typical) Power management Load switch Battery protection * High power and current handling capability DD1 DD1 D2 D RDS(ON) = 250 m @ VGS = -10 V RDS(ON) = 500 m @ VGS = -4.5 V 4 5 DD2 6 3 Q1 2 7 SO-8 Pin 1 SO-8 G2 S2 S G1 S1 G VDSS TA=25oC unless otherwise noted Parameter Drain-Source Voltage VGSS Gate-Source Voltage ID Drain Current - Continuous (Note 1a) - Pulsed PD Ratings Units -60 V 20 V -2.3 A -10 Power Dissipation for Dual Operation 2 Power Dissipation for Single Operation (Note 1a) 1.6 (Note 1b) 1.0 (Note 1c) TJ, TSTG 1 S Absolute Maximum Ratings Symbol 8 S Q2 Operating and Storage Junction Temperature Range W 0.9 -55 to +175 C 78 C/W Thermal Characteristics RJA RJC Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case (Note 1a) (Note 1c) 135 C/W (Note 1) 40 C/W Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity NDS9948 NDS9948 13'' 12mm 2500 units 2010 Fairchild Semiconductor Corporation NDS9948 Rev B1(W) http://store.iiic.cc/ NDS9948 January 2010 Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units 15 -10 mJ Drain-Source Avalanche Ratings (Note 2) W DSS Drain-Source Avalanche Energy IAR Drain-Source Avalanche Current Single Pulse, VDD=-54 V A Off Characteristics BVDSS BVDSS TJ IDSS Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current IGSSF IGSSR ID = -250 A VGS = 0 V, ID = -250 A, Referenced to25C -60 V -52 mV/C -2 -25 100 A Gate-Body Leakage, Forward VGS = 0 V VDS = -40 V, VDS = -40 V,VGS = 0 V TJ =-55C VGS = 20 V, VDS = 0 V Gate-Body Leakage, Reverse VGS = -20 V -100 nA On Characteristics VDS = 0 V nA (Note 2) ID = -250 A VDS = VGS, ID = -250 A, Referenced to25C -1 -1.5 4 -3 V 138 175 225 250 500 433 VGS(th) VGS(th) TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance ID(on) On-State Drain Current VGS = -10 V, ID = -2.3 A VGS = -4.5 V, ID = -1.6 A VGS = -10 V,ID = -2.3A, TJ =125C VGS = -10 V, VDS = -5 V gFS Forward Transconductance VDS = -10 V, ID = -2.3 A 5 VDS = -30 V, f = 1.0 MHz V GS = 0 V, 394 pF 53 pF 23 pF mV/C -10 m A S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time (Note 2) VDD = -30 V, VGS = -10 V, ID = -1 A, RGEN = 6 6 12 ns 9 18 ns td(off) Turn-Off Delay Time 16 29 ns tf Turn-Off Fall Time 3 6 ns Qg Total Gate Charge 9 13 nC Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = -30 V, VGS = -10 V ID = -2.3 A, 1.4 nC 1.7 nC NDS9948 Rev B1(W) http://store.iiic.cc/ NDS9948 Electrical Characteristics Symbol Parameter A = 25C unless otherwise noted Test Conditions Min Typ Max Units -0.8 -1.7 -1.2 A V Drain-Source Diode Characteristics and Maximum Ratings IS VSD trr Maximum Continuous Drain-Source Diode Forward Current IS = -1.7 A(Note 2) Drain-Source Diode Forward VGS = 0 V, Voltage IF = -2.3A, VGS = 0 V, Reverse Recovery Time dIF/dt = 100A/s 25 nS Notes: 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 78C/W when mounted on a 2 0.5in pad of 2 oz copper b) 125C/W when mounted on a 2 0.02 in pad of 2 oz copper c) 135C/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% NDS9948 Rev B1(W) http://store.iiic.cc/ NDS9948 Electrical Characteristics (cont.) T NDS9948 Typical Characteristics 10 -4.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.8 VGS = -10V -6.0V -4.0V -ID, DRAIN CURRENT (A) 8 -3.5V 6 -3.0V 4 2 0 VGS=-3.5V 1.6 1.4 -4.0V -4.5V 1.2 -6.0V -10V 1 0.8 0 1 2 3 4 5 6 0 2 4 -VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics. 10 0.5 ID = -1A ID = -2.3A VGS = -10V 1.8 RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 8 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 2 1.6 1.4 1.2 1 0.8 0.6 0.4 0.45 0.4 0.35 TA = 125oC 0.3 0.25 0.2 TA = 25oC 0.15 0.1 -50 -25 0 25 50 75 100 125 150 175 2 4 o 6 8 10 -VGS, GATE TO SOURCE VOLTAGE (V) TJ, JUNCTION TEMPERATURE ( C) Figure 3. On-Resistance Variation withTemperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 6 25oC TA = -55oC -IS, REVERSE DRAIN CURRENT (A) VDS = -5V 5 -ID, DRAIN CURRENT (A) 6 -ID, DRAIN CURRENT (A) 125oC 4 3 2 1 0 1 1.5 2 2.5 3 3.5 4 VGS =0V 10 25oC 0.1 -55oC 0.01 0.001 0.0001 0 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. TA = 125oC 1 0.2 0.4 0.6 0.8 1 1.2 -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. NDS9948 Rev B1(W) http://store.iiic.cc/ NDS9948 Typical Characteristics 600 ID = -2.3A VDS = -20V f = 1 MHz VGS = 0 V -30V 500 8 CAPACITANCE (pF) -VGS, GATE-SOURCE VOLTAGE (V) 10 -40V 6 4 CISS 400 300 200 COSS 2 100 CRSS 0 0 0 2 4 6 8 10 0 10 Qg, GATE CHARGE (nC) Figure 7. Gate Charge Characteristics. 30 50 60 50 P(pk), PEAK TRANSIENT POWER (W) 100 10 1ms RDS(ON) LIMIT 10ms 100ms 1 1s VGS = -10V SINGLE PULSE RJA = 135oC/W 0.1 10s DC TA = 25oC 0.01 0.1 1 10 100 SINGLE PULSE RJA = 135C/W TA = 25C 40 30 20 10 0 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) -VDS, DRAIN-SOURCE VOLTAGE (V) Figure 9. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 40 Figure 8. Capacitance Characteristics. 100 -ID, DRAIN CURRENT (A) 20 -VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 10. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RJA(t) = r(t) * RJA 0.2 0.1 o RJA = 135 C/W 0.1 0.05 P(pk) 0.02 0.01 t1 0.01 t2 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design. NDS9948 Rev B1(W) http://store.iiic.cc/ TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. PDP SPMTM AccuPowerTM FlashWriter(R) * (R)* FPSTM Power-SPMTM Auto-SPMTM The Power Franchise(R) F-PFSTM PowerTrench(R) Build it NowTM (R) PowerXSTM FRFET(R) CorePLUSTM Global Power ResourceSM Programmable Active DroopTM CorePOWERTM QFET(R) Green FPSTM CROSSVOLTTM TinyBoostTM QSTM Green FPSTM e-SeriesTM CTLTM TinyBuckTM Quiet SeriesTM GmaxTM Current Transfer LogicTM TinyCalcTM RapidConfigureTM GTOTM DEUXPEED(R) TinyLogic(R) TM IntelliMAXTM Dual CoolTM TINYOPTOTM ISOPLANARTM EcoSPARK(R) TinyPowerTM EfficentMaxTM Saving our world, 1mW/W/kW at a timeTM MegaBuckTM TinyPWMTM EZSWITCHTM* SignalWiseTM MICROCOUPLERTM TinyWireTM TM* SmartMaxTM MicroFETTM TriFault DetectTM SMART STARTTM MicroPakTM TRUECURRENTTM* (R) SPM MicroPak2TM (R) SerDesTM STEALTHTM MillerDriveTM Fairchild(R) SuperFETTM MotionMaxTM Fairchild Semiconductor(R) SuperSOTTM-3 Motion-SPMTM UHC(R) FACT Quiet SeriesTM SuperSOTTM-6 OptiHiTTM (R) Ultra FRFETTM FACT SuperSOTTM-8 OPTOLOGIC(R) UniFETTM FAST(R) OPTOPLANAR(R) SupreMOSTM (R) VCXTM FastvCoreTM SyncFETTM VisualMaxTM FETBenchTM Sync-LockTM XSTM tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handing and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I46 http://store.iiic.cc/