SILICON EPITAXIAL NPN TRANSISTOR BC109CSM * Hermetic Ceramic Surface Mount Package * Designed For Low Noise General Purpose Amplifiers, Driver Stages and Signal Processing Applications * Screening Options Available ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise stated) VCBO VCEO VEBO IC ICM PD Collector - Base Voltage Collector - Emitter Voltage Emitter - Base Voltage Continuous Collector Current Peak Collector Current TA = 25C Total Power Dissipation at Derate Above 25C TC = 25C 30V 20V 5V 100mA 200mA 300mW 2mW/C 750mW 5mW/C -65 to +175C -65 to +175C Derate Above 25C TJ Tstg Junction Temperature Range Storage Temperature Range THERMAL PROPERTIES Symbols Parameters RJA RJC Min. Typ. Max. Units Thermal Resistance, Junction To Ambient 500 C/W Thermal Resistance, Junction To Case 200 C/W Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. S emelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8123 Issue 2 Page 1 of 3 SILICON EPITAXIAL NPN TRANSISTOR BC109CSM ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise stated) Symbols Parameters ICBO Collector-Cut-Off Current V(BR)CBO V(BR)EBO Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage VBE(1) Base-Emitter Voltage VCE(sat)(1) Collector-Emitter Saturation Voltage (1) V(BR)CEO VBE(sat) hFE (1) Base-Emitter Saturation Voltage (1) Forward-current transfer ratio Test Conditions Min. Typ VCB = 20V TA = 150C IC = 10A 30 IC = 10mA 20 IE = 10A 5 Max. Units 15 nA 15 A V IC = 2mA VCE = 5V IC = 10mA VCE = 5V 700 IC = 10mA IB = 0.5mA 250 IC = 100mA IB = 5mA 600 IC = 10mA IB = 0.5mA 750 IC = 100mA IB = 5mA 900 IC = 2mA VCE = 5V 200 IC = 10A VCE = 5V 40 IC = 10mA VCE = 5V 550 700 mV 800 DYNAMIC CHARACTERISTICS fT Transition Frequency hfe Small-Signal Current Gain Cobo Output Capacitance Cibo Input Capacitance 150 MHz f = 100MHz IC = 2mA VCE = 5V f = 1.0KHz VCB = 10V 240 900 IE = 0 6 f = 1.0MHz VEB = 0.5V IC = 0 f = 1.0MHz 12 pF pF Notes (1) Pulse Width 300us, 2% Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8123 Issue 2 Page 2 of 3 SILICON EPITAXIAL NPN TRANSISTOR BC109CSM MECHANICAL DATA Dimensions in mm (inches) 0.31 rad. (0.012) 3 2 0.76 0.15 (0.03 0.006) 2.54 0.13 (0.10 0.005) 0.51 0.10 (0.02 0.004) 1 1.91 0.10 (0.075 0.004) 0.31 rad. (0.012) 3.05 0.13 (0.12 0.005) A= 1.02 0.10 (0.04 0.004) A 1.40 (0.055) max. LCC1 Underside View Pad 1 - Base Pad 2 - Emitter Pad 3 - Collector Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com Document Number 8123 Issue 2 Page 3 of 3