KLT15F Series 15 WATT, Universal Input Open Frame Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load INPUT SPECIFICATIONS Input Voltage...................................85 ~ 264VAC Input Frequency............................... 47 ~ 63Hz Input Current...............................0.2A Typ. Inrush Current..............................10A OUTPUT SPECIFICATIONS FEATURES TRIPLE OUTPUTS LOW COST OPEN FRAME Output Voltage ...........................See Chart Efficiency...................................70% Typ. Over-Voltage Protection................CH1 only. Zener Limiter Over-Current Protection.................Automatic Recovery Ripple and Noise.........................See Chart Hold-Up Time..................................20 mS Load Regulation.............................CH1 - 100mV CH2, CH3 - 120mV Rise Time....................................100mS Leakage Current ................................100V - 0.5mArms 230V - 0.75mArms Drift (8H, after 1H)....................0.5% +15 mV UNIVERSAL INPUT GENERAL SPECIFICATIONS OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION COMPACT, LOW-PROFILE PACKAGES Isolation Voltage Primary to Secondary...............3000VAC Primary to Case......................1500VAC Secondary to Case..................500VAC Isolation Resistance......................100 M-Ohms min. 3 YEAR WARRANTY ENVIRONMENTAL SPECIFICATIONS OPTIONAL CHASSIS AND COVER SAFETIES/APPROVALS UL60950 CSA C22.2 No. 60950(cUL) CE EN60950 3rd Edition (LVD) Operating Temperature ...................0C ~ +60C Cooling..........................................Convection Temperature Coefficient................... 0.02% / C Humidity........................................20 ~ 85%Rh (non-condensing) Storage Temperature....................-20C ~ +85C Shock Vibration...........................Shock: 20G(3 Directions each 3 times) Vibration: 10 ~ 55Hz PHYSICAL SPECIFICATIONS Open Frame 1 MODEL OUTPUT 1 KLT15F-0522 KLT15F-0533 +5V +5V 2.0A 2.OA OUTPUT 2 +12V +15V 0.5A 0.45A OUTPUT 3 -12V -15V 0.5A 0.45A MAX POWER NOT TO EXCEED 15WATTS KLT15F Note: * * * Phoenix connector shown. JST and Molex connectors available. Measurements in millimeter (mm) unless otherwise specified Tolerance 1mm NOTE: All specifications typical and nominal / full load and 25C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. 2 Ripple & Noise (mVp-p) 150mVp-p 150mVp-p