3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight 1512 Series
Physical
Electrical
Environmental
Insulator
Material: High Temperature Thermoplastic (PCT or LCP)
Flammability: UL 94V-0
Color: Black
Contact
Material: Copper Alloy
Plating
Underplating: 100 µ″ [ 2.54 µm ] Nickel
Wiping Area: 30 µ″ [ 0.76 µm ] Gold
Solder Tails: 300 µ″ [ 7.6 µm ] Matte Tin or 200 µ″ Tin-Lead
Marking: None
Current Rating: 1.5 A
Insulation Resistance: > 1 × 109 Ω at 250 VDC
Withstanding Voltage: 500 VRMS at Sea Level
Temperature Rating: -55°C to +105°C
Process Rating: Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-0808-08
Sheet 1 of 4
• Industry standard compatible
• High temperature dielectric
• "No lead" wave and reflow solder
compatible
• Unique lengths available
• Maximizes use of PC board space
• Mates with boardmount and wiremount
products
• End stackable feature
• Side stackable feature
• Tape and reel packaging option available
• See Regulatory Information Appendix
for chemical compliance information
Date Modified: February 3, 2007
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight 1512 Series
Contact
Quantity Dimension C
02 .079
04 .157
06 .238
08 .315
10 .394
12 .472
14 .551
16 .630
18 .709
20 .787
22 .866
24 .945
26 1.024
28 1.102
30 1.181
32 1.280
34 1.339
36 1.417
38 1.496
40 1.575
42 1.654
44 1.732
46 1.811
48 1.890
50 1.969
52 2.047
54 2.126
56 2.205
58 2.283
60 2.382
Plating suffix:
RB = 30µ" [.76µm] Gold w/Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions for R eference
Onl
y
Tolerance Unless Noted
[mm]
Inch
Ordering Information
1512XX-8X22-XX
Pin Length
Dim ‘A'
3 = .130″
4 = .152″
Contact Quantity
(See Table 1)
Straight
C +.000
-.020 .155
[3.94]
.03
[0.76] .0787
[2.000]
A ± .008
.0787
[2.000
.059
[1.50]
.118 ± .010
.009 ± .001
[0.23]
.0787 ± .003
[2.000]
.0787 ± .003
[2.000]
∅.032 ± .003
[0.81]
After Plating
.0204 ± .0003
[0.518]
R .040
[1.02]
4 Sides, Crown
R .0020
[0.050] .0244 ± .0005
[0.620]
Recommended Mounting
Hole Pattern
Pin Cross Section
TS-0808-08
Sheet 2 of 4
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight 1512 Series
Contact
Quantity Dimension C
02 .079
04 .157
06 .238
08 .315
10 .394
12 .472
14 .551
16 .630
18 .709
20 .787
22 .866
24 .945
26 1.024
28 1.102
30 1.181
32 1.280
34 1.339
36 1.417
38 1.496
40 1.575
42 1.654
44 1.732
46 1.811
48 1.890
50 1.969
52 2.047
54 2.126
56 2.205
58 2.283
60 2.382
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions for R eference
Onl
y
Tolerance Unless Noted
[mm]
Inch
1512XX-7X22-XX
Pin Length
Dim A
3 = .130″
4 = .152″
Contact Quantity
(See Table 1)
Ordering Information
C +.000
-.020
.165
[4.19] .157
[3.99]
.118 ± .010
.0787
[2.000]
.047
[1.19]
.0787
[2.000]
.068
[1.73]
A ± .008
.015
[0.38]
Standoff
.0787
[2.000]
.029
[0.74]
.0787 ± .003
[2.000]
.0787 ± .003
[2.000]
∅.032 ± .003
[0.81]
After Plating
.0204 ± .0003
[0.518]
R .040
[1.02]
4 Sides, Crown
R .0020
[0.050] .0244 ± .0005
[0.620]
Recommended
Mounting Hole Pattern Pin Cross Section
Right Angle
Plating suffix:
RB = 30µ" [.76µm] Gold w/Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold w/Tin-lead solder tails (App. E3 & C2 Apply) TS-0808-08
Sheet 3 of 4
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
2 mm × 2 mm Solder Tail Straight & Right Angle, Surfacemount Straight 1512 Series
TS-0808-08
Sheet 4 of 4
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dim ensions for R eference
Onl
y
Tolerance Unless Noted
[mm]
Inch
Ordering Information
1512XX-2X20-XX-XX
Pin Length Dim A
3 = .130″
4 = .152″
Contact Quantity
(See Table 1)
Packaging suffix:
Blank = Tray Packaging
WX = Tape & Reel Packaging
(see table)
Note: Tape and Reel not available on all sizes, please call.
C +.000
-.020
.155
[ 3.94 ]
.0787
[ 2.00 ]
.03
[ 0.8 ]
A ± .008
.059
[ 1.50 ]
.050
[ 1.27 ]
.263 ± .02
[ 6.68 ]
.122 Typ
[ 3.10 ] .030
[ 0.76 ]
.310
[ 7.87 ]
.0787
[ 2.00 ]
R.0020
[ 0.05 ]
.0204 ± .0003
[ 0.518 ]
R.040 [ 1.02 ]
4 Sides, Crown
Recommended PCB Pad Layout
.0787 [ 2.00 ]
.0244 ± .0005
[ 0.620 ]
Pin Cross Section
Plating suffix:
RB = 30µ" [.76µm] Gold with Matte Tin solder tails (App. E1 & C1 Apply)
TB = 30µ" [.76µm] Gold with Tin-lead solder tails (App. E3 & C2 Apply)
TH = 15µ" [.38µm] Gold with Tin-lead solder tails (App. E2 & C2 Apply)
Contact
Quantity Dimension "C" Tape & Reel
Suffix
04 .139 [3.5]
06 .217 [5.5]
08 .295 [7.5] WB
10 .374 [9.5]
12 .453 [11.5]
14 .531 [13.5]
16 .611 [15.5]
18 .689 [17.5]
20 .768 [19.5]
22 .847 [21.5]
24 .925 [23.5]
26 1.005 [25.5]
28 1.083 [27.5]
30 1.162 [29.5]
32 1.240 [31.5]
34 1.320 [33.5]
36 1.398 [35.5]
38 1.477 [37.5]
40 1.556 [39.5]
42 1.634 [41.5]
44 1.714 [43.5]
46 1.792 [45.5]
48 1.870 [47.5]
50 1.970 [49.5]
52 2.028 [51.5]
54 2.107 [53.5]
56 2.185 [55.5]
58 2.264 [57.5]
60 2.344 [59.5]
WF
WG
n/a
WC
WD
WE
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Name and Content of Hazardous Substances or Elements
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects RIA-2217-A
© 3M 2007
