MP1505 THRU MP1510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes FEATURES * * * * Superior thermal desing 300 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O MP-15 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. MP-15W Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL MP1505 MP151 MP152 MP154 MP156 MP158 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 RATINGS Maximum Average Forward Output Current at Tc = 55 o C MP1510 UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 15.0 Amps I FSM 300 Amps RMS isolation voltage from case to lead VISO 2500 Volts Typical Thermal Resistance (from junction to case) R qJC 2 Typical Thermal Resistance (from junction to ambient RqJA 19 Operating and Storage Temperature Range T J, T STG Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 0 -55 to + 150 C/W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 7.5A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T C = 100 o C NOTE: 1. Suffix "W" for wire type 2. "Fully ROHS compliant","100% Sn plating(Pb-free). VF IR MP1505 MP151 MP152 MP154 MP156 MP158 MP1510 UNITS 1.1 Volts 5.0 uAmps 0.5 mAmps 2008-10 REV: O RATING AND CHARACTERISTIC CURVES ( MP1505 THRU MP1510 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 200 100 0 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 TJ = 25 Pulse Width = 300us 1% Duty Cycle 1.0 .1 1.2 1.3 .6 .7 .8 .9 1.0 1.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 10 60 Hz RESISTIVE OR INDUCTIVE LOAD 5 0 0 50 100 CASE TEMPERATURE, ( TJ = 25 .1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) .583 (14.8) MAX. .311 (7.9) 1.142 (29) 1.102 (28) .732 (18.6) .693 (17.6) 1.142 (29) 1.102 (28) .32 x .252 (0.81 x 6.35) MIN. .787 (20.0) .043 (1.1) .039 (1.0) Hole for # 10 screw Min f.200 (5.08) .634 (16.1) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) 175 1.0 Hole for # 10 screw Min .469 (11.9) .429 (10.9) .480 (12.2) .425 (10.8) 150 ) 10 Max. .311 (7.9) .673 (17.1) .01 15 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) 100 2 .693 (17.6) INSTANTANEOUS FORWARD CURRENT, (A) 1 20 .543 (13.8) .732 (18.6) .693 (17.6) MP-15 MP-15W .200 (5.08) .142 (29.0) .102 (28.0) 400 AVERAGE FORWARD CURRENT, (A) 25 8.3ms Single Half Sine-Wave (JEDEC Method) .732 (18.6) PEAK FORWARD SURGE CURRENT, (A) 500 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.