ALUMINUM ELECTROLYTIC CAPACITORS KW Standard, For Audio Equipment series Realization of a harmonious balance of sound quality, made possible by the development of new electrolyte. Most suited for AV equipment like DVD, MD. Compliant to the RoHS directive (2011/65/EU). KW High Sound Quality FW Specifications Item Performance Characteristics -40 to +85C 6.3 to 100V 0.1 to 33000F 20% at 120Hz, 20C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03 CV or 4 (A) , whichever is greater. After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01 CV or 3 (A) , whichever is greater. Leakage Current Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz at 20C 100 0.08 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 40C / Z+20C Sleeve (P.E.T.) 10 4 10 16 3 8 d 25 2 5 35 2 4 50 2 3 63 2 3 100 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After sroring the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with gold color letter on black sleeve. D+ MAX. Sleeve (P.E.T.) Pressure relief vent (6.3up) D+ MAX. d L+ D 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 d 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 L+ 15MIN MAX. 6.3 Code8 2.5 3.5 0R10.6 0.5 0.5 R220.5 6.3 10 5.0 0.6 0.5 12.50J 16 5.0 7.5 0.6 0.8 0.5 0.5 0.33 (D R33 < 20) 1.5 0.47 (D R4720) 2.0 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 6.3 x 11 470 471 6.3 x 11 1000 102 8 x 11.5 2200 222 10 x 20 3300 332 10 x 20 4700 472 12.5 x 20 6800 682 12.5 x 25 10000 103 16 x 25 15000 153 16 x 35.5 22000 223 18 x 40 33000 333 22 x 50 16 7.5 0.8 0.5 18 7.5 0.8 0.5 20 10 1.0 0.5 Frequency 0.1 to 47 100 to 470 1000 to 33000 2 3 4 5 6 P 0.5 7 8 9 10 11 Configuration Capacitance tolerance (20%) (mm) 22 25 10 12.5 1.0 1.0 1.0 1.0 Rated capacitance (1000F) Rated voltage (10V) Series name Type 18 7.5 0.8 0.5 20 10 1.0 0.5 265 310 530 980 1170 1350 1600 2000 2550 3200 3900 22 10 1.0 1.0 10 (mm) 25 1A 12.5 1.0 1.0 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 35.5 20 x 40 22 x 50 16 1C 145 5 x 11 230 6.3 x 11 270 8 x 11.5 330 8 x 11.5 630 10 x 16 1050 12.5 x 20 1420 12.5 x 25 1800 16 x 25 2150 16 x 35.5 2500 18 x 35.5 2720 20 x 40 3700 22 x 50 4500 25 x 50 25 1E 155 250 360 420 770 1250 1700 2100 2500 2640 3400 4200 4800 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 20 x 40 22 x 50 25 x 50 Frequency coefficient of rated ripple current Cap.(F) 1 U KW 1 A 1 0 2 M PD D Pb-free leadwire Pb-free PET sleeve 5 6.3 8 *10 12.5 to 18 20 to 25 DD ED PD HD RD * Please refer to page 20 about the end seal configuration. V D 5 P 2.0 0.1 0.5 d 0.220.5 4MIN (D < 20) 1.5 (D 20) 2.0 4MIN Dimensions Cap. (F) Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 1000F) 15MIN MAX. P 0.5 Radial Lead Type Pressure relief vent (6.3up) Capacitance change tan Leakage current 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 35 1V 5 x 11 115 5 x 11 185 6.3 x 11 320 10 x 12.5 420 10 x 12.5 530 10 x 16 950 12.5 x 20 1550 16 x 25 1950 16 x 35.5 2360 18 x 35.5 2590 20 x 40 3000 22 x 50 3800 25 x 50 4500 105 120 200 370 470 630 1100 1800 2220 2490 3000 3700 4300 50 1H 63 1J 100 2A 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 35.5 18 x 35.5 20 x 40 22 x 50 25 x 50 1.1 2.4 3.5 5.0 10 23 35 40 65 5 x 11 95 5 x 11 120 6.3 x 11 150 6.3 x 11 250 10 x 12.5 410 10 x 16 570 10 x 20 760 12.5 x 20 1300 16 x 25 2090 18 x 35.5 2360 20 x 40 2900 22 x 50 3500 25 x 50 4000 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 25 16 x 25 18 x 40 22 x 50 25 x 50 70 100 140 165 300 470 650 880 1300 2200 2700 3400 3500 2.1 4.7 7.0 10 21 30 40 45 75 120 160 210 350 600 750 1000 1370 2400 2900 Case size D x L (mm) Rated ripple Rated ripple current (mArms) at 85C 120Hz 10kHz or more 2.00 1.50 1.15 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D