5.0SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 20 TO 170 Volts 5000Watts Peak Pulse Power DEVICE MARKING CODE 5.0SMDJ PART NUMBER 5.0SMDJ 20A Uni-polar Bi-polar REVERSE BREAKDO BREAKDO MAXIMUM REVERSE PEAK WN WN STANDTEST CLAMPING LEAKAGE PULSE VOLTAGE VOLTAGE CURRENT VOLTAGE OFF CURRENT @ VRWM VBR(V) VBR(V) VOLTAGE IT (mA) @Ipp Ipp (A) IR(A) VRWM(V) Vc(V) MIN.@IT MAX.@IT 5PEW 5BEW 20.0 22.20 24.50 1 32.4 155.00 5 5.0SMDJ 22A 3.0SMCJ 22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 141.00 5 5.0SMDJ 24A 3.0SMCJ 24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 129.00 5 5.0SMDJ 26A 3.0SMCJ 26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 119.00 5 5.0SMDJ 28A 3.0SMCJ 28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.00 5 5.0SMDJ 30A 3.0SMCJ 30CA 5PFK 5BFK 30.0 33.30 36.80 1 48.4 103.00 5 5.0SMDJ 33A 3.0SMCJ 33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.90 5 5.0SMDJ 36A 3.0SMCJ 36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.10 5 5.0SMDJ 40A 3.0SMCJ 40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.60 5 5.0SMDJ 43A 3.0SMCJ 43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.10 5 5.0SMDJ 45A 3.0SMCJ 45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.80 5 5.0SMDJ 48A 3.0SMCJ 48CA 5PFX 5BFX 48.0 53.30 58.90 1 77.4 64.70 5 5.0SMDJ 51A 3.0SMCJ 51CA 5PFZ 5BFZ 51.0 56.70 62.70 1 82.4 60.70 5 5.0SMDJ 54A 3.0SMCJ 54CA 5RGE 5BGE 54.0 60.00 66.30 1 87.1 57.50 5 5.0SMDJ 58A 3.0SMCJ 58CA 5PGG 5BGG 58.0 64.40 71.20 1 93.6 53.50 5 5.0SMDJ 60A 3.0SMCJ 60CA 5PGK 5BGK 60.0 66.70 73.70 1 96.8 51.70 5 5.0SMDJ 64A 3.0SMCJ 64CA 5PGM 5BGM 64.0 71.10 78.60 1 103.0 48.60 5 5.0SMDJ 70A 3.0SMCJ 70CA 5PGP 5BGP 70.0 77.80 86.00 1 113.0 44.30 5 5.0SMDJ 75A 3.0SMCJ 75CA 5PGR 5BGR 75.0 83.30 92.10 1 121.0 41.40 5 5.0SMDJ 78A 3.0SMCJ 78CA 5PGT 5BGT 78.0 86.70 95.80 1 126.0 39.70 5 5.0SMDJ 85A 3.0SMCJ 85CA 5PGV 5BGV 85.0 94.40 104.00 1 137.0 36.50 5 5.0SMDJ 90A 3.0SMCJ 90CA 5PGX 5BGX 90.0 100.00 111.00 1 146.0 34.30 5 5.0SMDJ 100A 3.0SMCJ 100CA 5PGZ 100.0 111.00 123.00 1 162.0 30.90 5 5.0SMDJ 110A 3.0SMCJ 110CA 5PHE 110.0 122.00 135.00 1 177.0 28.30 5 5.0SMDJ 120A 3.0SMCJ 120CA 5PHG 120.0 133.00 147.00 1 193.0 26.00 5 5.0SMDJ 130A 3.0SMCJ 130CA 5PHK 130.0 144.00 159.00 1 209.0 24.00 5 5.0SMDJ 150A 3.0SMCJ 150CA 5PHM 150.0 167.00 185.00 1 243.0 20.60 5 5.0SMDJ 160A 3.0SMCJ 160CA 5PHP 160.0 178.00 197.00 1 259.0 19.30 5 5.0SMDJ 170A 3.0SMCJ 170CA 5PHR 170.0 189.00 209.00 1 275.0 18.20 5 5.0SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-20 TO 170 Volts 5000 Watt Peak Pulse Power FEATURES For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from 0 Volts to BV for unidirectional types Typical IR less than 1uA High temperature soldering: 250C/10 seconds at terminals Plastic package has Underwriters Laboratory Flammability 94V-O Dimensions in inches and (millimeters) MECHANICAL DATA Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional Standard Packaging: 16mm tape (EIA STD RS-481) Weight: 0.007 ounce, 0.21 gram MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBO L VALUE UNITS Minimu Peak Pulse Power Dissipation on 10/1000s waveform (Note 1,2 ,FIG.1) PPPM Watts m 5000 SEE IPPM Peak Pulse Current of on 10/1000s waveform (Note 1,FIG.3) Amps TABLE Peak Forward Surge Current,8.3ms Single Half Sine-Wave IFSM 300 Amps Superimposed on Rated Load,(JEDEC Method) (Note2, 3) -55 to + TJ , TSTG Operating junction and Storage Temperature Range 150 Notes : 1.Non-repetitive current pulse , per Fig. 3 and derated above T A = 25 per Fig. 2 . RATING 2.Mounted on 8.0mm2 Copper Pads to each terminal 3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 5.0SMDJ SERIES RATINGS AND CHARACTERISTIC CURVES Ratings and Characteristic Curves(TA=25 unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Curve 100 Non-repetitive pulse waveform shown in Fig.3 TA = 25C Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% PPPM-Peak Pulse Power (kW) 100 10 1 87.5 75 62.5 50 37.5 25 12.5 0.1 0 0.1s 1.0s 10s 100s 1.0ms 10ms 0 25 50 td - Pulse Width (sec.) Fig.3 - Pulse Waveform TJ = 25C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 100 10/1000sec.Waveform as defined by R.E.A. 150 175 200 VR = 0 1000 VR = Rated Stand-off Voltage 100 f = 1MHz Vsig = 50mVp-p TJ = 25C td 0 1.0 0 2.0 3.0 3.0 4.0 10 4.0 10 1 5 Fig. 5 - Steady State Power Derating Curve 100 500 1000 Fig.6 - Maximum Non-repetitive Forward Surge current 8.0 300 IFSM,Peak Forward Surge Currnet (A) 60Hz Resistive or Inductive Load 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 1010 VWM - Reverse Stand-Off Voltage (V) t - Time(ms) PM(AV),Steady State Power Dissipation (W) 125 Unidirectional Bidirectional 1000 Half Value- I PPM 2 50 100 Fig. 4 - Typical Junction Capacitance 10000 10000 CJ - Capacitance (pF) IPPM - Peak Pulse Current,% IRSM 150 tr = 10sec. 75 TA - Ambient Temperature (C) 8.3ms Single Half Sine-Wave (JEDEC Method) 250 200 150 100 0 25 50 75 100 125 150 TL - Lead Temperature (C) 175 200 1 10 Number of Cycles at 60 H Z 100 1000