SZM-2066Z SZM-2066Z 2.4GHz to 2.7GHz 2W Power Amplifier 2.4GHz to 2.7GHz 2W POWER AMPLIFIER Package: QFN, 6mmx6mm Product Description Features RFMD's SZM-2066Z is a high linearity class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic Q-FlexN multi-chip module package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. This product is specifically designed as a final or driver stage for 802.16 and 802.11b/g equipment in the 2.4GHz to 2.7GHz bands. It can run from a 3V to 5V supply. The external output match and bias adjustability allows load line optimization for other applications or over narrower bands. It features an output power Optimum Technology detector, on/off power control and high RF overdrive robustMatching(R) Applied ness. A 20dB step attenuator feature can be utilized by switchGaAs HBT ing the second stage Power up/down control. P1dB = 33.5dBm at 5V Three Stages of Gain:37dB 802.11g 54Mb/s Class AB Performance POUT =26dBm at 2.5% EVM, VCC 5V, 690mA Active Bias with Adjustable Current On-Chip Output Power Detector Low Thermal Resistance SiGe BiCMOS Power Up/Down Control <1s Si BiCMOS GaAs MESFET Vcc = 5V InGaP HBT SiGe HBT GaAs pHEMT RFIN RFOUT Si CMOS Si BJT GaN HEMT Stage 1 Bias Vbias = 5V Stage 2 Bias Stage 3 Bias Applications InP HBT RF MEMS Parameter Frequency of Operation Output Power at 1dB Compression Small Signal Gain EVM Third Order Supression Noise Figure Worst Case Input Return Loss Worst Case Output Return Loss Output Voltage Range Quiescent Current Power Up Control Current Power Detector Power Up/Dow n Control LDMOS Min. 2500 32.0 32.2 7.5 12.5 454 Specification Typ. Max. 2700 33.5 33.7 2.5 -45.0 7.7 10.5 15.5 0.9 to 1.8 583 -40.0 659 4.0 VCC Leakage Current Thermal Resistance 12.0 Test Conditions: Z0 =50, VCC =5V, IQ =583mA, TBP =30C 802.16 WiMAX Driver or Output Stage 802.11b/g WiFi, WiFi Unit Condition MHz dBm dB % 2.7GHz 2.7GHz 2.7GHz, 802.11g 54Mb/s at POUT =26dBm dBc dB dB dB V mA 2.7GHz, POUT =23dBm per tone 2.7GHz 2.5GHz to 2.7GHz 2.5GHz to 2.7GHz POUT =10dBm to 33dBm VCC =5V mA 100 Attenuator Step 20dB at VPC2 =0V A C/W VPC =5V, IVPC1 +IVPC2 +IVPC3 VCC =5V, VPC =0V junction - lead RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. DS110620 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 18 SZM-2066Z Absolute Maximum Ratings Parameter Rating Unit VC3 Collector Bias Current (IVC3) 1500 mA VC2 Collector Bias Current (IVC2) 500 mA VC1 Collector Bias Current (IVC1) 150 mA ****Device Voltage (VD) 9.0 V 6 W ***Max CW RF output Power for 50W continuous long term operation 30 dBm Max CW RF output Power for 50 output load 26 dBm Max CW RF Input Power for 10:1 VSWR out load 5 dBm Power Dissipation Storage Temperature Range -40 to +150 C Operating Temp Range (TL) -40 to +85 C Operating Junction Temperature (TJ) +150 C ESD Rating - Human Body Model 1000 V Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. ***With specified application circuit ****No RF Drive Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l Typical Performance with appropriate app circuit (VCC =5V, ICQ =583mA, *802.11g 54Mb/s 64QAM) Parameter Unit **2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz Gain @ POUT =26dBm dB 37.5 36.9 36.5 34.6 P1dB POUT @ 2.5% EVM* Current @ POUT 2.5% EVM* dBm dBm mA 34.6 27.0 703 33.5 26.0 710 33.5 26.0 700 33.9 26.5 712 Input Return Loss Output Return Loss Step Attentuation (VPC2 =0V) dB dB dB -12.1 -27 27 -11.5 -15.6 27 -10.8 -28 26 -10.5 -18.5 25 Test Conditions: **Measured with 2.4GHz to 2.5GHz Application circuit. Simplified Device Schematic 2 of 18 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS110620 31 30 40 GND NC C4B VBIAS3 C3B VB3B C2B C1B NC VC2B NC SZM-2066Z 1 VC1 NC VBIAS12 RFOUT R1A RFOUT R2A RFOUT RFIN RFOUT NC RFOUT VPC1 RFOUT NC VPC2 21 10 VPC3 C4A C3A C2A VB3A C1A VC2A 20 NC NC 11 GND VDET GND DS110620 GND 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 18 SZM-2066Z Measured 2.4GHz to 2.5GHz Application Circuit Data (VCC =VPC =5.0V, IQ =556mA, T=25C) EVM vs Pout F=2.4GHz 802.11g, OFDM 54Mb/S, 64QAM 5.0 5.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 EVM(%) EVM(%) EVM vs Pout T=+25c 802.11g, OFDM 54Mb/S, 64QAM 2.5 2.0 2.5 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 12 14 16 18 20 22 Pout(dBm) 2.4GHz 24 26 28 12 30 14 16 2.5GHz 18 20 22 Pout(dBm) -40c 24 +25c 26 28 30 +85c IM3 vs Pout (2 Tone Avg.),T=+25c Tone Spacing = 1MHz EVM vs Pout F=2.5GHz 802.11g, OFDM 54Mb/S, 64QAM -30 5.0 4.5 -35 4.0 -40 IM3(dBc) EVM(%) 3.5 3.0 2.5 2.0 1.5 -45 -50 -55 1.0 -60 0.5 0.0 -65 12 14 16 18 -40c 20 22 Pout(dBm) +25c 24 26 28 30 18 20 +85c 2.4GHz Typical Gain vs Pout, F=2.4GHz 26 28 2.5GHz Typical Gain vs Pout, F=2.5GHz 41 40 40 39 39 38 38 37 37 Gain(dB) Gain(dB) 24 Pout(dBm) 41 36 35 36 35 34 34 33 33 32 32 31 31 16 18 20 22 24 26 28 Pout(dBm) -40c 4 of 18 22 +25c 30 +85c 32 34 36 16 18 20 22 24 26 28 Pout(dBm) -40c 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. +25c 30 32 34 36 +85c DS110620 SZM-2066Z Measured 2.4GHz to 2.5GHz Application Circuit Data (VCC =VPC =5.0V, IQ =556mA, T=25C) Narrow band S12 - Reverse Isolation 0 -45 -5 -50 -10 -55 S12(dB) S11(dB) Narrow band S11 - Input Return Loss -15 -60 -20 -65 -25 -70 -75 -30 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.0 3.0 2.1 2.2 2.3 2.4 -40C +25C -40C +85C 40 0 38 -5 36 -10 S22(dB) S21(dB) 2.6 2.7 2.8 2.9 3.0 +25C 2.9 3.0 32 34 +85C Narrow band S22 - Output Return Loss Narrow band S21 - Forw ard Gain 34 32 -15 -20 30 -25 28 -30 -35 26 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.0 3.0 2.1 2.2 2.3 2.4 -40C +25C 2.5 2.6 2.7 2.8 Frequency(GHz) Frequency(GHz) -40C +85C +25C +85C DC Supply Current vs Pout, F=2.4GHz DC Supply Current vs Pout, T=+25C 1.3 1.2 1.2 1.1 1.1 1.0 Idc(A) 1.0 Idc(A) 2.5 Frequency(GHz) Frequency(GHz) 0.9 0.9 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 16 18 20 22 2.4GHz DS110620 24 26 Pout(dBm) 28 30 2.5GHz 32 34 16 18 20 22 24 26 Pout(dBm) -40c +25c 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 28 30 +85c 5 of 18 SZM-2066Z Measured 2.4GHz to 2.5GHz Application Circuit Data (VCC =VPC =5.0V, IQ =556mA, T=25C RF Power Detector (Vdet) vs Pout, F=2.4GHz Noise Figure vs Frequency 1.6 10.00 1.5 9.50 1.4 9.00 8.50 NF(dB) Vdet(V) 1.3 1.2 1.1 8.00 7.50 7.00 6.50 1.0 6.00 0.9 5.50 5.00 2.40 0.8 16 18 20 22 24 26 Pout(dBm) -40c +25c 28 30 32 34 2.42 2.44 2.46 2.48 2.50 Frequency(GHz) -40C +85c +25C +85C Broadband S21 - Forward Gain Broadband S11 - Input Return Loss 40 0 38 -5 S21(dB) S11(dB) 36 -10 -15 34 32 30 -20 28 26 -25 0.0 1.0 2.0 3.0 4.0 5.0 0.0 6.0 1.0 2.0 -40C +25C -40C +85C 4.0 5.0 6.0 +25C +85C 2.4-2.5GHz 20dB Step Attenuator Gain Delta vs Temp. Attenuator Enabled VPC2=0V Broadband S22 - Output Return Loss 0 34 -5 32 -10 30 Delta(dB) S22(dB) 3.0 Frequency(GHz) Frequency(GHz) -15 -20 28 26 -25 24 -30 22 20 -35 0.0 1.0 2.0 3.0 4.0 Frequency(GHz) -40C 6 of 18 +25C 5.0 6.0 2.4 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.5 Frequency(GHz) +85C T=-40c T=+25c 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. T=+85c DS110620 SZM-2066Z Measured 2.5GHz to 2.7GHz Application Circuit Data (VCC =VPC =5.0V, IQ =583mA, T=25C) EVM vs Pout F=2.5GHz 802.11g, OFDM 54Mb/S, 64QAM 5 5.0 4.5 4.5 4 4.0 3.5 3.5 3 3.0 EVM(%) EVM(%) EVM vs Pout T=+25c 802.11g, OFDM 54Mb/S, 64QAM 2.5 2 2.5 2.0 1.5 1.5 1 1.0 0.5 0.5 0.0 0 12 14 16 18 2.5GHz 20 22 Pout(dBm) 24 26 2.6GHz 2.7GHz 12 28 14 16 18 20 Pout(dBm) -40c EVM vs Pout F=2.7GHz 802.11g, OFDM 54Mb/S, 64QAM 22 +25c 24 26 28 +85c IM3 vs Pout (2 tone avg.), F=2.5GHz -35 5.0 4.5 -40 4.0 -45 IM3(dBc) EVM(%) 3.5 3.0 2.5 2.0 -50 -55 1.5 1.0 -60 0.5 -65 0.0 12 14 16 18 20 22 24 Pout(dBm) -40c +25c +85c 26 18 28 22 24 Pout(dBm) -40c +25c 26 28 26 28 +85c IM3 vs Pout (2 Tone Avg.),T=+25c Tone Spacing = 1MHz IM3 vs Pout (2 tone avg.), F=2.7GHz -35 -35 -40 -40 -45 -45 IM3(dBc) IM3(dBc) 20 -50 -55 -50 -55 -60 -60 -65 -65 18 20 22 -40c DS110620 24 Pout(dBm) +25c 26 28 18 20 22 24 Pout(dBm) +85c 2.5GHz 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 2.6GHz 2.7GHz 7 of 18 SZM-2066Z Measured 2.5GHz to 2.7GHz Application Circuit Data (VCC =VPC =5.0V, IQ =583mA, T=25C) Narrow band S11 - Input Return Loss Narrow band S12 - Reverse Isolation -45 0 -50 -5 S12(dB) S11(dB) -55 -10 -15 -60 -65 -20 -70 -25 -75 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 2.0 2.1 2.2 2.3 2.4 Frequency(GHz) -40C +25C 2.5 2.6 2.7 2.8 2.9 3.0 2.9 3.0 32 34 Frequency(GHz) +85C -40C +25C +85C Narrow band S22 - Output Return Loss Narrow band S21 - Forw ard Gain -5 40 38 -10 S22(dB) S21(dB) 36 34 32 -15 -20 30 -25 28 -30 26 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.0 3.0 2.1 2.2 2.3 2.4 -40C +25C -40C +85C 2.7 2.8 +25C +85C 1.5 1.4 1.4 1.3 1.3 1.2 1.2 1.1 1.1 Idc(A) Idc(A) 2.6 DC Supply Current vs Pout, F=2.7GHz DC Supply Current vs Pout, F=2.5GHz 1.5 1 1 0.9 0.9 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 16 8 of 18 2.5 Frequency(GHz) Frequency(GHz) 18 20 22 24 26 Pout(dBm) -40c +25c 28 +85c 30 32 34 16 18 20 22 24 26 Pout(dBm) -40c +25c 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 28 30 +85c DS110620 SZM-2066Z Measured 2.5GHz to 2.7GHz Application Circuit Data (VCC =VPC =5.0V, IQ =583mA, T=25C) RF Power Detector (Vdet) vs Pout, F=2.7GHz 1.8 1.7 1.7 1.6 1.6 1.5 1.5 1.4 1.4 Vdet(V) Vdet(V) RF Power Detector (Vdet) vs Pout, F=2.5GHz 1.8 1.3 1.2 1.3 1.2 1.1 1.1 1.0 1.0 0.9 0.9 0.8 0.8 16 18 20 22 24 26 Pout(dBm) -40c +25c 28 30 32 34 16 18 20 +85c 22 -40c Icq vs Vpc, Vcc=5V, swept Vpc 24 26 Pout(dBm) +25c 28 30 32 34 +85c Noise Figure vs Frequency See App. Circuit pg. 12 for Vpc resistor value used 0.6 10 0.55 9.5 0.45 9 0.4 8.5 0.35 NF(dB) Icq(A) 0.5 0.3 0.25 8 7.5 7 0.2 6.5 0.15 6 0.1 5.5 0.05 0 3 3.5 4 4.5 DS110620 +25c 5 2.50 2.55 2.60 2.65 2.70 Frequency(GHz) Vpc(V) -40c 5 +85c -40C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. +25C +85C 9 of 18 SZM-2066Z Measured 2.5GHz to 2.7GHz Application Circuit Data (VCC =VPC =5.0V, IQ =583mA, T=25C) Broadband S21 - Forward Gain Broadband S11 - Input Return Loss 40 0 38 -5 S21(dB) S11(dB) 36 -10 -15 34 32 30 -20 28 -25 26 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0.0 1.0 2.0 Frequency(GHz) -40C +25C 3.0 4.0 5.0 6.0 Frequency(GHz) +85C -40C +25C +85C 2.5-2.7GHz 20dB Step Attenuator Gain Delta vs Temp. Attenuator Enabled VPC2=0V Broadband S22 - Output Return Loss 34 0 32 -5 30 Delta(dB) S22(dB) -10 -15 -20 28 26 24 -25 22 20 -30 0.0 1.0 2.0 3.0 4.0 Frequency(GHz) -40C 10 of 18 +25C 5.0 6.0 2.5 2.52 2.54 2.56 2.58 2.6 2.62 2.64 2.66 2.68 2.7 Frequency(GHz) +85C T=-40c T=+25c 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. T=+85c DS110620 SZM-2066Z Pin 7, 11, 12, 22, 29, 31, 39, 40 1, 10, 21, 30 2 3 4-5 6 8 Function NC VC1 VBIAS12 R1A-R2A RFIN VPC1 9 VPC2 13, 38 VC2A, VC2B 14-15 17-18 33-34 36-37 16, 35 C1A-C2A C3A-C4A C4B-C3B C2B-C1B VB3A, VB3B 19 VPC3 20 23-28 32 VDET RFOUT VBIAS3 GND Description These are no connect (NC) pins and are not wired inside the package. It is recommended to con-nect them as shown in the application circuit to achieve the stated performance. These pins are internally grounded inside the package to the backside ground paddle. It is recommended to also ground them external to the package to achieve the specified performance. This is the collector of the first stage. This is the supply voltage for the active bias circuit of the 1st and 2nd stages. A resistor is tied across these pins internal to the package. This is the RF input pin. It is DC grounded inside the package. Do not apply DC voltage to this pin. Power up/down control pin for the 1st stage. An external series resistor is required for proper set-ting of bias levels depending on control voltage. The voltage on this pin should never exceed the voltage on pin 3 by more than 0.5V unless the supply current from pin 3 is limited <10mA. Power up/down control pin for the 2nd stage. Power down VPC2<1V for step attenuator function enable.An external series resistor is required for proper setting of bias levels depending on control voltage. The voltage on this pin should never exceed the voltage on pin 3 by more than 0.5V unless the supply current from pin 3 is limited <10mA. These two pins are connected internal to the package and connect to the 2nd stage collector. Toachieve specified performance, the layout of these pins should match the Recommended Land Pattern. These pins have capacitors across them internal to the package as shown in the below schematic. They are used as tuning and RF coupling elements between the 2nd and 3rd stage. These are the connections to the base of the 3rd stage output device. To achieve specified perfor-mance, the layout of these pins should match the Recommended Land Pattern. Power up/down control pin for the 2nd stage. An external series resistor is required for proper setting of bias levels depending on control voltage. The voltage on this pin should never exceed the voltage on pin 32 by more than 0.5V unless the supply current from pin 33 is limited <10mA. This is the output port for the power detector. It samples the power at the input of the 3rd stage. These are the RF output pins and DC connections to the 3rd stage collector. This is the supply voltage for the active bias circuit of the 3rd stage. Part Symbolization The part will be symbolized with "SZM-2066Z" to designate it as a RoHS green compliant product. Marking designator will be on the top surface of the package. DS110620 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 11 of 18 SZM-2066Z Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. 12 of 18 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS110620 SZM-2066Z Recommended Metal Land Pattern Recommended PCB Soldermask for Land Pattern DS110620 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 13 of 18 SZM-2066Z 2.4GHz to 2.5GHz Evaluation Board Schematic for VCC =V+=VPC =5.0V 14 of 18 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS110620 SZM-2066Z 2.4GHz to 2.5GHz Evaluation Board for VCC =V+=VPC =5.0V C1 C7 C3 R7 C6 C4 R6 L3 L2 C5 C2 L1 Q1 C9 C8 R5 R1 R2 R3 R4 Bill of Materials for the 2.4GHz to 2.5GHz Evaluation Board DS110620 Desg Description Notes Q1 SZM-2066Z 6mmx6mm QFN R1 2.05K, 0603 1% 0402 may be used R2 4.22K, 0603 1% 0402 may be used R3 1.02K, 0603 1% 0402 may be used R4 4.02K, 0603 1% 0402 may be used 0402 may be used R5 47K, 0603 R6, 7 0, 0603 0402 may be used C1 1uF 16V MLCC CAP Tantalum ok for EVM performance. Use MLCC type for best IM3 levels. C2 5.6pF CAP, 0603 NPO, ROHM MCH185A5R6DK or equivalent C3, 4, 5, 6, 7 0.1uF CAP, 0603 X7R 0402 ok, ROHM MCH182CN104K or equivalent C8 2.4pF CAP, 0603 NPO, low ESR, ATC 60052R4CW250 or equivalent C9 10pF CAP, 0603 X7R 0402 ok, ROHM MCH1182CN104K or equivalent L1 12nH IND 0805 Coilcraft 0805HQ - 12XJBB L2 4.7nH IND, 0603 TOKO 0603 - LL1608FH4N7J L3 10nH IND, 0603 TOKO 0603 - LL1608FH10J 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 15 of 18 SZM-2066Z 2.5GHz to 2.7GHz Evaluation Board Schematic for VCC =V+=VPC =5.0V 16 of 18 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS110620 SZM-2066Z 2.5GHz to 2.7GHz Evaluation Board for VCC =V+=VPC =5.0V C1 C7 C3 R7 C6 C4 R6 L3 L2 C5 C2 L1 Q1 C9 C8 R5 R1 R2 R3 R4 Bill of Materials for the 2.5GHz to 2.7GHz Evaluation Board DS110620 Desg Description Notes Q1 SZM-2066Z 6mmx6mm QFN R1 2.05K, 0603 1% 0402 may be used R2 4.22K, 0603 1% 0402 may be used R3 1.02K, 0603 1% 0402 may be used R4 4.02K, 0603 1% 0402 may be used R5 47K, 0603 0402 may be used R6, 7 0, 0603 0402 may be used C1 1uF 16V MLCC CAP Tantalum ok for EVM performance. Use MLCC type for best IM3 levels. C2 5.6pF CAP, 0603 NPO, ROHM MCH185A5R6DK or equivalent C3, 4, 5, 6, 7 0.1uF CAP, 0603 X7R 0402 ok, ROHM MCH182CN104K or equivalent C8 2.4pF CAP, 0603 NPO, low ESR, ATC 60052R4CW250 or equivalent C9 10pF CAP, 0603 NPO, low ESR, ATC 600S100JW250 or equivalent L1 12nH IND 0805 Coilcraft 0805HQ - 12XJBB L2 4.7nH IND, 0603 TOKO 0603 - LL1608FH4N7J L3 10nH IND, 0603 TOKO 0603 - LL1608FH10J 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 17 of 18 SZM-2066Z Ordering Information 18 of 18 Ordering Code Description SZM2066ZSQ Standard 25 piece bag SZM2066ZSR Standard 100 piece reel SZM2066Z Standard 1000 piece reel SZM2066ZPCK-EVB2 Evaluation Board 2.4GHz to 2.5GHz Tune and 5 loose sample pieces SZM2066ZPCK-EVB3 Evaluation Board 2.5GHz to 2.7GHz Tune and 5 loose sample pieces 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS110620