1
2016.14
Push-on Bayonet Lock Miniature Waterproof Connectors
HR34B Series
Features
1. Water and dust protection
• IP67 or more (IP68) water and dust protection rating when
fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
2. Easy and precise mating
Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
Marking helps align plug with receptacle when mating.
3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
The 4-position connectors meet requirements of T ¨
UV
standard.
5. Wide variation
Item
Number of positions
Connector type
Terminations(plug)
Terminations(receptacle)
Conduit material
Applicable cable size(Reference)
4,10
straight plug,right angle plug,receptacle
solder,crimp
wire solder
plastic,metal
(Ø5.7~6.5), (Ø6.5~7.3), (Ø8.0~9.0)
Push-on Bayonet Lock
fig.1
Mating : Just inserting plug unit will complete mating
Un-mating : Rotating sleeve to unlock mating
Cable exit directions
fig.2
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
Product Specifications
1A DC
500V DC
10 pos. : 900V AC / 1 minute
4 pos. : 2,000V AC / 1 minute
20mø max.
1,000Mø min.
No flashover or insulation breakdown
1.
Contact resistance
2.
Insulation resistance
3.Withstanding voltage
SpecificationItem Conditions
Insulation resistance : 50Mø min. (at high humidity)
Insulation resistance : 500Mø min. (when dry)
No water penetration inside connector At the depth of 1meters for 0.5 hours.
500 cycles
No electrical discontinuity of 10μs or longer
Contact resistance : 30mø max.
Insulation resistance : 500Mø min.
Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75
mm, 98m/s2each, 3 hours in 3 axis.
Temperature : -55°C /+15° to +35°C /+85°C /+15° to +35°C
Time :-30 min. /2 to 3 min. /30 min. /2 to 3 min.
5 cycles
336 hours at 71°C, and humidity of 95%
Acceleration of 490 m/s2, 11 ms duration,
3 axis, each for 3 hours
No electrical discontinuity of 10μs or longer4.Vibration
5.Shock
6.Durability
(Mating / un-mating)
7.Temperature cycle
8.Humidity
9.
Water protection
Current rating
Voltage rating
Ratings
10 pos. : 200V AC, 250V DC
4 pos. : 200V AC, 200V DC (Pollution degree 3)
400V AC, 400V DC (Pollution degree 2)
10 pos. : 3A
4 pos. :5A Operating temperature range
Storage temperature range
-25°C to 125°C
-10°C to 60°C
Materials / Finish
Remarks
---------------
---------------
---------------
---------------
---------------
UL94V-0
Part Material Finish
Outer shell
Insulator
O-ring
Male contacts
Ground contact
10 pos.
4 pos.
4 pos.
Zinc alloy
PPS
Copper alloy
Brass
Brass
Fluororubber
Gold plated
Silver plated
Silver plated
Black chromate finish
(Trivalent Chromium)
Color : Black
---------------
Receptacles
Remarks
---------------
---------------
---------------
---------------
UL94V-0
Part Material Finish
Outer shell
O-ring
Gasket
Insulator
Female contacts 10 pos.
4 pos.
Zinc alloy, aluminum alloy, and
polyamide resin (black)
Fluororubber,
Nitrile hydride rubber
PPS
Black chrome plating, black chromate
finish (Trivalent Chromium)
Color : Black
---------------
Phosphor bronze
Copper alloy
Gold plated
Silver plated
Plugs
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
2
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
3
Number of contacts.
(Excluding ground contacts)
Contact type
S : Female, wire solder
SC : Female, crimp
Keying
Blank : Standard
X : X key position
Other specifications : 2 numerical digits wil be added when
there is a specifications change other
than shown in positions qto u
Product Number Structure
HR34B - 12 WP A - 10 S - X (****)
1 52 3 4 6 7 8
Plugs
Series name : HR34B Series
Shell size : Diameter(mm) of the mating interface of the plug
Shell style WP : Straight plug
WLP : Right-angle plug
Conduit material and Applicable cable size
A : Conduit material metal, Applicable cable (Reference) : (Ø5.7~6.5)
B : Conduit material metal, Applicable cable (Reference) : (Ø6.5~7.3)
D : Conduit material plastic, Applicable cable (Reference) : (Ø5.7~6.5)
E : Conduit material plastic, Applicable cable (Reference) : (Ø6.5~7.3)
K : Conduit material metal, Applicable cable (Reference) : (Ø8.0~9.0)
1 5
6
7
8
2
3
4
Number of contacts.
(Excluding ground contacts)
Contact type
P : Male,wire solder
Keying
Blank : Standard
X : X key position
Other specifications : 2 numerical digits wil be added when
there is a specification change other
than shown in positions qto u
HR34B - 12 WR A - 10 P - X (****)
1 52 3 4 6 7 8
Receptacles
Series name : HR34B Series
Shell size : Diameter(mm) of the mating interface of the plug
Shell style WR : Receptacle
Shell type
A : Square flange for 10 positions
B : Square flange for 4 positions
1 5
6
7
8
2
3
4
Conductor size : 20 to 25AWG
Plating
1 : Gold plated
HR34B - SC1 - 2 1 1
1 2 43 5
Crimp contacts
Series name : HR34B Series
Contact style :
SC1 : Female contact
Contact type
1 : 100pcs/pack
2 : 10,000pcs/reel
1 4
5
2
3
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
BIllustrations of mated connectors.
49
Ø19
A
Straight plugs
Part No.
HR34B-12WPD-10S
HR34B-12WPE-10S
HR34B-12WPD-4S
HR34B-12WPD-4S-X
HR34B-12WPE-4S
HR34B-12WPE-4S-X
HRS No. A
134-0026-0 00
134-0027-2 00
134-0020-3 00
134-0023-1 00
134-0025-7 00
134-0031-0 00
Ø7.4
Ø8.5
Ø7.4
Ø8.5
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions : mm
Ø1
Ø1.7
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part No.
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
HRS No. A
134-0004-7 71
134-0007-5 71
134-0052-0 00
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions : mm
Ø1
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Part No.
HR34B-12WPD-10SC
HR34B-12WPE-10SC
HRS No. A
134-0037-6 00
134-0038-9 00
Ø7.4
Ø8.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part No.
HR34B-12WPA-10SC
HR34B-12WPB-10SC
HR34B-12WPK-10SC
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
HRS No. A
134-0017-9 00
134-0028-5 00
134-0053-2 00
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Standard type (Conduit material :Plastic)
Wire solder
Wire solder
Crimp (separate contacts required)
Crimp (separate contacts required)
Robust type(Conduit material :Metal)
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
4
B
Straight plug Mating combinations
10 pos.plug + receptacle wire solder
4 pos.plug + receptacle wire solder
B
50.1
49.6
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
5
Right angle plugs
Standard type (Conduit material : Plastic)
33.5
Ø19
BA
Part No.
HR34B-12WLPD-10S
HR34B-12WLPE-10S
HR34B-12WLPD-4S
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S
HR34B-12WLPE-4S-X
HRS No. A B
134-0039-1 00
134-0040-0 00
134-0030-7 00
134-0034-8 00
134-0035-0 00
134-0036-3 00
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions : mm
Ø1
Ø1.7
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part No.
HR34B-12WLPA-10S(71)
HR34B-12WLPB-10S(71)
HR34B-12WLPK-10S
HRS No. A B
134-0005-0 71
134-0008-8 71
134-0054-5 00
Ø7.4
Ø8.5
Ø9.5
30.5
31.5
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions : mm
Ø1
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Part No.
HR34B-12WLPD-10SC
HR34B-12WLPE-10SC
HRS No. A B
134-0041-3 00
134-0042-6 00
Ø7.4
Ø8.5 30.85
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part No.
HR34B-12WLPA-10SC
HR34B-12WLPB-10SC
HR34B-12WLPK-10SC
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
HRS No. A B
134-0018-1 00
134-0029-8 00
134-0055-8 00
Ø7.4
Ø8.5
Ø9.5
30.5
31.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Wire solder
Wire solder
Crimp (separate contacts required)
Crimp (separate contacts required)
Robust type (Conduit material :Metal)
Ø7.4
Ø8.5
Ø7.4
Ø8.5
30.85
BIllustrations of mated connectors.
A
(33.5)
10 pos. plug shell A,B type.
10 pos. plug shell D,E type.
10 pos. plug shell K type.
4 pos. plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
A
31.0
31.3
32.0
31.3
Right-angle plug Mating Combinations
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
Receptacles
Wire solder
13
47
810
A
A
B
B
4-Ø3.2
4-(R2.8)
Part No.
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
O ring for water proof is not attached. Please find appropriate one from the market.
HRS No. A B
134-0016-6 00
134-0021-6 00
134-0024-4 00
Solder cup inner diameter
All dimensions : mm
Ø1
Ø1.4
17.26
18.26
23.4
25.4
BCrimp contacts
Female
15
1.2
Part No. Packaging
HR34B-SC1-111
HR34B-SC1-211
100 pcs/pack
10,000 pcs/reel
Note : Use wire with a jacket diameter of 1.7mm max.
HRS No.
134-0051-7 00
134-0050-4 00
Applicable conductor
20 to 25AWG
(Stranded wire)
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
6
BRecommended panel cutouts
Receptacle - wire solder
ØE
ØD
CA
A
4-B
A
B
C
D
E
Part No.
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
Recommended O ring dia.
Thickness
Ø1.5
Ø1.5
Inner diameter
Ø11.5
Ø15.5
HR34B-12WRA-10P HR34B-12WRB-4P
HR34B-12WRB-4P-X
17.26±0.05
1 0/-0.1
12.5 +0.1/0
17 +0.1/0
18.26±0.05
1.1 0/-0.1
16.3 +0.1/0
20.8 +0.1/0
M3∞0.5
All dimensions : mm
BReceptacle Contact Arrangement
note.1 View direction : Mating surface
note.2 mark is ground terminal.
108
74
312
65
9
1
23
4 pos.wire solder 10 pos.wire solder
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
7
BConnector Mating Combinations
Straight, Wire Solder (Standard key position)
HR34B-12WPD-4S
HR34B-12WPE-4S
Wire solder (Standard key position)
HR34B-12WRB-4P
Wire solder (X key position)
HR34B-12WRB-4P-X
Right angle, Wire Solder (Standard key position)
HR34B-12WLPD-4S
HR34B-12WLPE-4S
Straight, Wire Solder (X key position)
HR34B-12WPD-4S-X
HR34B-12WPE-4S-X
Right angle, Wire Solder (X key position)
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S-X
4 pos. Plugs 4 pos. Receptacles
Standard key position
X key position
X key position
Standard
key position
Straight, Wire Solder or Crimp
HR34B-12WPA-10S(71),10SC HR34B-12WPB-10S(71),10SC
HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC
HR34B-12WPK-10S,10SC
Right angle, Wire Solder or Crimp
HR34B-12WLPA-10S(71),10SC HR34B-12WLPB-10S(71),10SC
HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC
HR34B-12WLPK-10S,10SC
Wire Solder
HR34B-12WRA-10P
10 pos. Plugs 10 pos. Receptacles
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
8
HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connectors
BApplicable tools
Description Part No. HRS No. Applicable contact Applicable cable
Manual contact crimping tool
Press
Applicator
Contact extraction tool
HT304/HR34B-1
CM-105C
AP105-HR34B-1
RP6-SC-TP
150-0107-9
901-0001-0
901-2051-2
150-0039-0
HR34B-SC1-111
HR34B-SC1-211
HR34B-SC1-111
HR34B-SC1-211
20AWG,23AWG,25AWG
20 to 25AWG
---------------
Manual contact crimping tool
Press CM-105C (Applicator
ordered separate)
Contact extraction tool
BHandling
BPrecautions
1. Mating 2. Un-mating
Holding the plug by the outer shell (A) align the arrow on the plug
with the alignment mark on the receptacle and push straight in.
Rotate the sleeve (B) counter-clockwise to a full stop and un-mate
the plug from the receptacle.
Plug
Mating position alignment marks
Receptacle
A
1. When disconnecting or inserting the connector, be sure to do so after turning off the power.
2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below
(i.e., the mating mark of the receptacle).
3. Note that the display method of the mating mark will differ depending on the receptacle.
4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.
5. Please consult Hirose Electric Sales for harness assembly procedure.
Center line of the connector
1 mm max.
Alignment mark
When completely mated and locked the alignment
arrow on the plug must line-up with the center line of
the connector (alignment mark on the receptacle).
If the alignment arrow and the center line of the
connectors are not aligned (1 mm max.) re-insert
the plug until they are aligned.
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,J APAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
Feb.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.