www.marathonsp.com 2PDS 0078 REV-I 01/05/17
Termination Speci cations
Line & Load Side Termination
Type Torque Stud Length Maximum
Lug/Bar Width
Listed lugs on
3/8 - 16 studs
21.7 N·m
(192 lbf·in)
1”
(25mm)
1.50”
(38mm)
• For use with conductors prepared with listed connectors such as single hole compression/crimp lugs or
listed ring, fork or spade terminals.
• Conductor size, ampacity, temperature rating and type are dictated by the ratings of the listed lugs utilized
and applicable code requirements.
Installation & Accessories
• Mounting (Panel):
• For use with #10 fastener.
• Torque mounting fastener to 25-30 lbf·in (2.8 - 3.4 N·m).
• Covers:
• Flat covers available upon request
• Catalog Number: CC144x (replace “x” with number of poles)
• Covers are clear polycarbonate
• Accessory covers are not intended to provide insulation for electrical spacings.
• Marker Strip: white vinyl strip with mounting screws available.
• Printing options available, consult customer service for speci cations.