M Vishay Thin Film Commercial Thick Film Chip Resistors SURFACE MOUNT SURFACE MOUNT CHIPS FEATURES Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, VISHAY provides a high rel chip with the same reliability and stability found in military grade resistors. These chips are available in the widest range of sizes, values, and performance characteristics. High value, high stability chips are available up to 200M ohm; consult factory. * Lead (Pb)-Free available Pb-free * High purity alumina substrate for high power Available dissipation RoHS* * Wraparound terminations featuring a thin film COMPLIANT adhesion layer covered with a leach resistant nickel barrier layer for + 150C operating conditions * High speed laser trimming for high volume requirements * Ruthenium based cermet thick film for dependable performance * Fired-on glass passivation * Tape & reel packaging standard; static-free waffle pack available * Active trim and zero ohm chips TYPICAL PERFORMANCE CONSTRUCTION Overglaze Resistor ABS Alumina Substrate Inner Electrode Nickel Barrier TCR 100 TOL 1 Solderable Coating STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS MATERIAL RUTHENIUM Resistance Range 10 ohms to 25M ohms Absolute TCR 100ppm/C Tolerance - 55C to + 125C 1%, 2%, 5%, 10% Stability: R Ratio 0.15% Operating Temperature Range CASE SIZE CONDITIONS RATING (mW) WORKING VOLTAGE 2000 hrs. @ + 70C - 55C to + 150C MINIMUM RESISTANCE (OHMS) 0402 100 25 0502 100 25 0504 125 40 0505 125 40 0603 150 40 0705 200 50 1002 150 50 Consult factory for nominals above 25M Ohms. 10 - 10M 10 - 25M 10 - 25M 10 - 25M 10 - 25M 10 - 25M 10 - 25M CASE SIZE RATING (mW) WORKING VOLTAGE MINIMUM RESISTANCE (OHMS) 1005 1010 1206 1505 2010 2208 2512 250 500 330 350 1000 750 2000 75 75 100 100 175 150 200 10 - 25M 10 - 25M 10 - 25M 10 - 25M 10 - 25M 10 - 25M 10 - 25M * Pb containing terminations are not RoHS compliant, exemptions may apply VISHAY THIN FILM * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11919 FAX: +39.2.300.11999 * JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 1953 451 274 FAX: +44 1953 457 722 * USA: (610) 407-4800 FAX: (610) 640-9081 www.vishay.com 52 For technical questions contact: thin-film@vishay.com Document Number: 60031 Revision 23-Nov-05 Commercial Thick Film Chip Resistors Vishay Thin Film DIMENSIONS in inches D SURFACE MOUNT M W T E L L 0.042 0.006 0.050 0.006 0.050 0.006 0.055 0.006 0.064 0.006 0.080 0.006 0.100 0.006 0.105 0.007 0.105 0.007 0.126 0.008 0.155 0.007 0.209 0.009 0.230 0.007 0.259 0.009 W 0.022 0.005 0.025 0.005 0.040 0.005 0.050 0.005 0.032 0.005 0.050 0.005 0.025 0.005 0.050 0.005 0.100 0.005 0.063 0.005 0.050 0.005 0.098 0.005 0.075 0.005 0.124 0.005 T 0.010 to 0.033 0.020 Max. 0.020 Max. 0.012 to 0.033 0.010 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 0.015 to 0.033 D 0.010 0.005 0.010 0.005 0.010 0.005 0.010 0.005 0.010 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 + 0.005,- 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 DERATING CURVE 10 R (%) 100K R (%) Thermal Shock 0.02 0.03 Short Term Overload 0.02 0.02 Low Temperature Operation 0.03 0.04 Resistance to Solder Heat 0.06 0.02 Moisture Resistance 0.10 0.08 High Temperature Exposure 0.02 0.02 Percent of Rated Power ENVIRONMENTAL TEST TEST E 0.010 0.005 0.010 0.005 0.010 0.005 0.015 0.005 0.010 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.015 0.005 0.020 + 0.005, - 0.010 0.015 0.005 0.020 0.005 0.020 0.005 0.020 0.005 100 80 60 40 20 0 0 70 125 Ambient Temperature C 150 How to Order STYLE M = High Rel Cermet Thick Film Wraparound T = Topside CASE SIZE TCR CHARACTERISTIC 0402 K = 100 PPM/C 0502 0504 L = 200 PPM/C 0505 0603 M = 300 PPM/C 0805* 1005 S = Special 1010 1206 1505 2010 2208 2512 OHMIC VALUE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. e.g. 0000 = zero ohms "R" designates the decimal point. 10R0 = 10 ohms TOLERANCE F = 1.0% G = 2.0% J = 5.0% K = 10.0% S = Special N = Not Trimmed (Specify Limits) TERMINATION B = Solderable (Solder coated w/ nickel barrier) PACKAGE T = Tape & Reel E = Electroplated Gold (Au) W= Waffle Pack G = Epoxy/ Solderable (Au over Ni) W = Wirebondable Gold (Au) S = Lead (Pb)-Free 96.5% Sn 3.0% Ag 0.5% Cu * 0705 and 0805 are the same (only use 0805 when ordering) Example: M0505K1003JBT is a thick film cermet wraparound chip resistor, 50 mil square, with a TCR of 100 ppm/C, a value of 100K ohms, 5% tolerance and solder coated nickel barrier terminations, on tape and reel packaging. Lead (Pb)-Free Example: M1206KXXXXFST VISHAY THIN FILM * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11919 FAX: +39.2.300.11999 * JAPAN +81.3.5464.6411 FAX: +81.3.5464.6433 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 1953 451 274 FAX: +44 1953 457 722 * USA: (610) 407-4800 FAX: (610) 640-9081 Document Number: 60031 Revision 23-Nov-05 For technical questions contact: thin-film@vishay.com www.vishay.com 53 SURFACE MOUNT CHIPS CASE SIZE TERM 0402 B 0502 B 0504 B 0505 B 0603 B 0805*, 0705* B 1002 B 1005 B 1010 B 1206 B 1505 B 2010 B 2208 B 2512 B Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1