D-Sub GS Series Rectangular I/O Connectors * NFC-UTE C 93-425 * According to MIL-C-24308 * Layouts: 9, 15, 25, 37 and 50 * High reliability * More than 5000 mating and unmating cycles * Contact resistance: 5 m max. * Solder and removable crimp contacts Technical Characteristics MATERIAL GENERAL CHARACTERISTICS Shell Plated steel Insulator PBT (15%) UL 94 V0 Pin & socket body Brass Socket wires Copper alloy Plastic hood ABS, UL 94 VO Metallized plastic hood Metallized ABS, UL 94 VO Metallized hood Aluminium alloy PLATING Terminations and contact areas Shell Au/Ni GS: tinned shell GSD: zinc yellow-chromate plated shell ELECTRICAL CHARACTERISTICS Working Voltage Current rating Dielectric withstanding voltage Electrical continuity (shell to shell)* Contact resistance E A B C D Number of contacts 9 15 25 37 50 Pitch between contacts 2.77 mm (25, 37 & 50 contacts) Pitch between rows 2.84 mm Crimp termination AWG 26-28 (0.093 to 0.14 mm2) ENVIRONMENTAL CHARACTERISTICS Temperature range -55 C, + 125 C Dry heat 1000h at +125 C Salt spray GS series : 48h Damped heat 56 days (40 C, relative humidity: 90-95 %) GSD series : 500h MECHANICAL CHARACTERISTICS Contact retention 300 VAC 40N min (max displacement: 0.3 mm) Mating and unmating cycles 5000 7.5 A Vibrations and shocks no discontinuity 1000 Vrms * Sinusoidal vibrations 10/2000 Hz, 1.5 mm, 20g * Shocks 50 g 2 mh typical 5 mh max (standard value 8 mh max) Insulation resistance Housing 5.103 Mh max 20 ns INSULATOR RETENTION IN HOUSING Housing E A B C D Number of contacts 9 15 25 37 50 53N 80N Min retention 124N 180N 233N * Only for tin plated shells with dimples APRIL 2005 343 D-Sub GS Series Ordering Information G S - 009 13 10 110 SERIES MODEL SHELL TYPE - tin plated shell* (salt spray 48h) zinc yellow chromate plated shell** (salt spray 500h) D LAYOUT 009 015 025 037 050 PART - POLARITY - PLATING 13 17 22 26 male plug, gold plated terminations male plug, pretinned terminations female receptacle, gold plated terminations female receptacle, pretinned terminations TERMINATIONS 10 20 22 30 right angle termination CI crimp contacts AWG 20 to 24 crimp contacts AWG 26 to 28 straight termination MOUNTING 110 150 111 * ** 344 mounting for D Sub 90 (M3-6G) float mounting right angle D Sub mounting (4-40 UNC) male plug with dimples male plug without dimples The other accessories are sold separately Sealed connectors: consult us. APRIL 2005 D-Sub GS Series Dimensions: 90 PC tail plugs Pin o 1.02 Part Number GS-009..10... GS-015..10... GS-025..10... GS-037..10... GS-050..10... No. of contacts 9 15 25 37 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.7 39.1 52.9 69.3 66.7 16.9 25.2 38.9 55.4 52.8 25 33.3 47.05 63.5 61.1 8.4 8.4 8.4 8.4 11.2 12.3 12.3 12.3 12.3 15.3 19.3 27.5 41.3 57.7 55.3 10.8 10.8 10.8 10.8 13.6 Dimensions are in mm APRIL 2005 345 D-Sub GS Series Dimensions: 90 PC tail receptacles Socket o 1.02 Part Number GS-009..10... GS-015..10... GS-025..10... GS-037..10... GS-050..10... No. of contacts 9 15 25 37 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.7 39.1 52.9 69.3 66.7 16.2 24.7 38.4 54.7 52.3 25 33.3 47.05 63.5 61.1 7.8 7.8 7.8 7.8 10.8 12.3 12.3 12.3 12.3 15.3 19.3 27.5 41.3 57.7 55.3 10.8 10.8 10.8 10.8 13.6 Dimensions are in mm 346 APRIL 2005 D-Sub GS Series Dimensions: straight PC tail plugs Pin o 1.02 Part Number GS-009..30... GS-015..30... GS-025..30... GS-037..30... GS-050..30... No. of contacts 9 15 25 37 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.7 39.1 52.9 69.3 66.7 16.9 25.2 38.9 55.4 52.8 25 33.3 47.05 63.5 61.1 8.4 8.4 8.4 8.4 11.2 12.3 12.3 12.3 12.3 15.3 19.3 27.5 41.3 57.7 55.3 10.8 10.8 10.8 10.8 13.6 Dimensions are in mm APRIL 2005 347 D-Sub GS Series Dimensions: straight PC tail receptacles Socket o 1.02 Part Number GS-009..30... GS-015..30... GS-025..30... GS-037..30... GS-050..30... No. of contacts 9 15 25 37 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.7 39.1 52.9 69.3 66.7 16.2 24.7 38.4 54.7 52.3 25 33.3 47.05 63.5 61.1 7.8 7.8 7.8 7.8 10.8 12.3 12.3 12.3 12.3 15.3 19.3 27.5 41.3 57.7 55.3 10.8 10.8 10.8 10.8 13.6 Dimensions are in mm 348 APRIL 2005 D-Sub GS Series Dimensions: crimp terminations Pin o 1.02 2 holes o 3.05 Part Number GS-009..20... GS-009..22... GS-015..20... GS-015..22... GS-025..20... GS-025..22... GS-037..20... GS-037..22... GS-050..20... GS-050..22... No. of contacts 9 9 15 15 25 25 37 37 50 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.8 30.8 39.1 39.1 53 53 69.3 69.3 67 67 16.8 16.8 25.1 25.1 38.9 38.9 55.3 55.3 52.7 52.7 25 25 33.3 33.3 47 47 63.5 63.5 61.1 61.1 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 11 11 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 15.4 15.4 19.3 19.3 27.5 27.5 41.3 41.3 57.7 57.7 55.3 55.3 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 13.6 13.6 Dimensions are in mm APRIL 2005 349 D-Sub GS Series Dimensions: crimp terminations receptacles Socket o 1.02 2 holes o 3.05 Part Number GS-009..20... GS-009..22... GS-015..20... GS-015..22... GS-025..20... GS-025..22... GS-037..20... GS-037..22... GS-050..20... GS-050..22... No. of contacts 9 9 15 15 25 25 37 37 50 50 Dimensions (mm) A 0.2 B 0.2 C 0.2 D 0.2 E 0.2 H 0.2 J 0.2 30.8 30.8 39.1 39.1 53 53 69.3 69.3 67 67 16.4 16.4 24.7 24.7 38.5 38.5 54.9 54.9 52.5 52.5 25 25 33.3 33.3 47 47 63.5 63.5 61.1 61.1 8 8 8 8 8 8 8 8 10.8 10.8 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 15.4 15.4 19.3 19.3 27.5 27.5 41.3 41.3 57.7 57.7 55.3 55.3 10.8 10.8 10.8 10.8 10.8 10.8 10.8 10.8 13.6 13.6 Dimensions are in mm 350 APRIL 2005 D-Sub GS Series Dimensions: crimp termination contacts Pins Socket o 1.02, AWG 24 to 20 Ref. 0100 902-20-G2* Ref. 0100 901-20-OG* Pins Socket o 1.02, AWG 28 to 26 Ref. 0100 931-22-OG* Ref. 0100 932-22-G2* Dimensions are in mm APRIL 2005 351 D-Sub GS Series Mounting Lateral play: 0.9 Max Axial play: 0.4 Max Float Mounting Ref. GS- --- -- -- 150 Bracket and screw for D SUB 90 - 9 to 37 Ref. GS- --- -- -- 110 Bracket and female screw lock for D SUB 90 - 9 to 37 Ref. GS- --- -- -- 111 Dimensions are in mm 352 APRIL 2005 D-Sub GS Series Hoods with screw locks Plastic, 38mm screws Part Number GS-009 300 GS-015 300 GS-025 300 GS-037 300 GS-050 300 O Cable A 31 35 38 40 40 Dimensions (mm) B 31.5 40 53.5 70 67.5 C 15.2 15.2 15.2 15.2 18.2 A 31 35 38 40 40 Dimensions (mm) B 31.5 40 53.5 70 67.5 C 15.2 15.2 15.2 15.2 18.2 A 31 35 38 40 40 Dimensions (mm) B 31.5 40 53.5 70 67.5 C 15.2 15.2 15.2 15.2 18.2 A 31 35 38 40 40 Dimensions (mm) B 31.5 40 53.5 70 67.5 C 15.2 15.2 15.2 15.2 18.2 8.5 8.5 11 11 12 Plastic 18mm screws Part Number GS-009 301 GS-015 301 GS-025 301 GS-037 301 GS-050 301 O Cable 8.5 8.5 11 11 12 Metallized plastic 38mm screws Part Number GS-009 302 GS-015 302 GS-025 302 GS-037 302 GS-050 302 O Cable 8.5 8.5 11 11 12 Metallized plastic 18mm screws Part Number GS-009 303 GS-015 303 GS-025 303 GS-037 303 GS-050 303 O Cable 8.5 8.5 11 11 12 Diecast hood with screw locks Part Number GS-009 304 GS-015 304 GS-025 304 A 38 35 43 Dimensions (mm) B 31 39.5 53 Diecast hood with side cable output and screw locks Part Number GS-009 305 GS-015 305 GS-025 305 APRIL 2005 Dimensions (mm) A 31 39.3 53 353 D-Sub GS Series Accessories Crimp sleeve Part Number GS-060 307 GS-065 307 GS-075 307 GS-080 307 GS-100 307 GS-105 307 GS-110 307 GS-115 307 GS-120 307 GS-140 307 Crimp flange Dimensions (mm) O D3 O D4 6 7 6.5 7.5 7.5 8.5 8 9 10 11 10.5 11.5 11 12 11.5 12.5 12 13 14 15 Part Number GS-030 306 GS-035 306 GS-045 306 GS-050 306 GS-060 306 GS-070 306 GS-076 306 GS-080 306 GS-090 306 Dimensions (mm) O D1 O D2 3 4 3.5 4.5 4.5 5.5 5 6 6 7 7 8 7.6 8.6 8 9 9 10 Blind plug for diecast hood Part Number GS-937 308 GS-050 308 354 Number of contacts 9 to 37 50 APRIL 2005 D-Sub GS Series Accessories Female screw lock Male screw lockwithout hood CAPTIVE SCREW YELLOW-CHROMATE FINISH Part Number Dimensions (mm) GS-002 120 GS-002 121 GS-002 122 GS-002 123 GS-002 124 GS-002 125 10 11 13.2 16 18.2 22 TIN PLATED FINISH Part Number Dimensions (mm) GS-002 130 GS-002 131 GS-002 132 GS-002 133 10 11 13.2 16 GS-002 134 GS-002 135 18.2 22 Crimp tool Part Number GS-002 937 115 Number of contacts 9 to 37 Dimensions 13,2 GS-002 050 115 50 15,7 Locating plug Ref. M 22520/208 Dust caps Ref. M 22520/201 Contact extraction tool Ref. S-090 APRIL 2005 Part Number GS-009-311 Number of female contacts 9 GS-015-311 GS-025-311 GS-037-311 GS-050-311 15 25 37 50 Part Number GS-009-312 GS-015-312 GS-025-312 GS-037-312 GS-050-312 Number of male contacts 9 15 25 37 50 355 D-Sub GS Series Board preparation details for straight or bent terminations Dimensions are in mm 356 APRIL 2005