
SPECIFICATION
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
WORKINGHUMIDITY
WORKINGTEMP.
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
ACCURRENT (Typ.)
1000ms,20ms/230VAC1000ms,20ms/115VACatfullload
100ms/230VAC24ms/115VACatfullload
85~264VAC120~370VDC
47~440Hz
71%67% 73%
13.8~16.2V
74%
17.25~20.25V
76%
27.6~32.4V
0.12A/115VAC0.08A/230VAC
COLDSTART 25A/115VAC45A/230VAC
Above105% ratedoutputpower
5.75~6.75V3.8~4.95V
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
I/P-O/P:4KVAC
I/P-O/P:100MOhms/500VDC
20~90%RHnon-condensing
-20~+70 (Refertooutputloadderatingcurve)
-40~+85 ,10~95%RH
0.03%/ (0~50
10~500Hz,2G10min./1cycle,periodfor60min. eachalongX, Y,Zaxes
738.7Khrsmin.MIL-HDBK-217F(25 )
58*45*19.1mm(L*W*H)
0.03Kg;120pcs/4.6Kg/0.97CUFT
FileName:NFM-05-SPEC2007-09-19
1.0% 1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
1.0% 1.0%
2.0%2.0% 1.0% 1.0% 1.0%
80mVp-p80mVp-p 150mVp-p 150mVp-p 240mVp-p
3.3V 12V 15V 24V
1.25A 0.42A 0.33A 0.23A
0~1A0~1.25A 0~0.42A 0~0.33A 0~0.23A
4.125W 5.04W 4.95W 5.52W
NFM-05-5 NFM-05-12 NFM-05-15 NFM-05-24NFM-05-3.3
SAFETY STANDARDS UL60601-1,TUVEN60601-1,IEC60601-1approved
5WOutputSwitchingPowerSupply NFM-05 series
Features :
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
EMICONDUCTION&RADIATION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification
provided by the IC manufacturer.
ENVIRONMENT
SAFETY &
EMC
(Note4)
PROTECTION
Tj145 typically(U1)detectonmaincontrolIC
Protectiontype: Shutoffo/pvoltage,clampingbyzenerdiode
10.8~13.2V 13.5~16.5V 21.6~26.4V4.5~5.5V3~3.63V
CompliancetoEN55011 ,EN55022(CISPR22)ClassB(CISPR11)
HARMONICCURRENT
EMSIMMUNITY
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,EN60601-1-2,EN61204-3,medicallevel,criteria A
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Ultra-miniature size, light weight
Cooling by free air convection
Isolation class
UL60601-1/IEC60601-1/EN60601-1 medical safety approved
No load power consumption<0.5W
100% full load burn-in test
Fixed switching frequency at 67KHz
High reliability
3 years warranty
OVERTEMPERATURE Note.5
5V
1A
5W
EN60601-1
IEC60601-1
http://store.iiic.cc/