TL/F/6494
5404/DM5404/DM7404 Hex Inverting Gates
June 1989
5404/DM5404/DM7404
Hex Inverting Gates
General Description
This device contains six independent gates each of which
performs the logic INVERT function.
Features
YAlternate Military/Aerospace device (5404) is available.
Contact a National Semiconductor Sales Office/Distrib-
utor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6494–1
Order Number 5404DMQB, 5404FMQB, DM5404J, DM5404W, DM7404M or DM7404N
See NS Package Number J14A, M14A, N14A or W14B
Function Table
YeA
Inputs Output
AY
LH
HL
H
e
High Logic Level
LeLow Logic Level
C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.
Absolute Maximum Ratings (Note)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage 7V
Input Voltage 5.5V
Operating Free Air Temperature Range
DM54 and 54 b55§Ctoa
125§C
DM74 0§Ctoa
70§C
Storage Temperature Range b65§Ctoa
150§C
Note:
The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaran-
teed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
Recommended Operating Conditions
Symbol Parameter DM5404 DM7404 Units
Min Nom Max Min Nom Max
VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.8 0.8 V
IOH High Level Output Current b0.4 b0.4 mA
IOL Low Level Output Current 16 16 mA
TAFree Air Operating Temperature b55 125 0 70 §C
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 1)
VIInput Clamp Voltage VCC eMin, IIeb
12 mA b1.5 V
VOH High Level Output VCC eMin, IOH eMax 2.4 3.4 V
Voltage VIL eMax
VOL Low Level Output VCC eMin, IOL eMax 0.2 0.4 V
Voltage VIH eMin
IIInput Current @Max VCC eMax, VIe5.5V 1mA
Input Voltage
IIH High Level Input Current VCC eMax, VIe2.4V 40 mA
IIL Low Level Input Current VCC eMax, VIe0.4V b1.6 mA
IOS Short Circuit VCC eMax DM54 b20 b55 mA
Output Current (Note 2) DM74 b18 b55
ICCH Supply Current with VCC eMax 612mA
Outputs High
ICCL Supply Current with VCC eMax 18 33 mA
Outputs Low
Switching Characteristics at VCC e5V and TAe25§C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter Conditions Min Max Units
tPLH Propagation Delay Time CLe15 pF 22 ns
Low to High Level Output RLe400X
tPHL Propagation Delay Time 15 ns
High to Low Level Output
Note 1: All typicals are at VCC e5V, TAe25§C.
Note 2: Not more than one output should be shorted at a time.
2
3
Physical Dimensions inches (millimeters)
14-Lead Ceramic Dual-In-Line Package (J)
Order Number 5404DMQB or DM5404J
NS Package Number J14A
4
Physical Dimensions inches (millimeters) (Continued)
14-Lead Small Outline Molded Package (M)
Order Number DM7404M
NS Package Number M14A
14-Lead Molded Dual-In-Line Package (N)
Order Number DM7404N
NS Package Number N14A
5
5404/DM5404/DM7404 Hex Inverting Gates
Physical Dimensions inches (millimeters) (Continued)
14-Lead Ceramic Flat Package (W)
Order Number 5404FMQB or DM5404W
NS Package Number W14B
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (
a
49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge
@
tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (
a
49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (
a
49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (
a
49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (
a
49) 0-180-534 16 80 Fax: (852) 2736-9960
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
