High Reliability, Military D Subminature, & Non-Magnetic/No-Outgas Solder Cup Crimp (See page 333) Printed Circuit (See page 334-335) (See page 336-338) Performance and Material Specifications MATERIALS AND FINISHES Miltary Standard Finish Material Material Finish Steel per ASTM A-620 Yellow chromate over cadmium QQ-P-416 Type II Class 2 Yellow chromate over cadmium QQ-P-416 Type II Class 2 Shell Steel per ASTM A-620 Insulator Diallyl phthalate glass-filled per MIL-M-14, type SDG-F, color green Contact Copper alloy Gold over nickel Copper Alloy Crimp Socket has stainless steel hood passivated. Gold 50 microinches minimum thickness per MIL-G-45204 Type II Grade C Class 1 over copper per MIL-C-14550 Hood: Passivated Float Mount Hardware Stainless steel Passivate per QQ-P-35 Stainless steel Passivate per QQ-P-35 Diallyl phthalate glass-filled per MIL-M-14, type SDG-F, color green PERFOMANCE SPECIFICTIONS Wire Accommodation (AWG) Current Rating DIELECTRIC WITHSTANDING VOLTAGE Solder - #20 Max. Crimp - #18- #30 Max. 90 and Straight (Solder/Crimp) Altitude (feet/m) #20; 5 Amp Temperature Rating -65C to +150C Contact Resistance 55 @ 7.5 Amp After Salt Spray, Millivolt Max. Sea Level 20,000/6,096 50,000/15,240 70,000/21,336 Average Flashover 1700/1500 1000/1000 650/500 500/500 Test 1250/1000 750/650 475/325 375/325 test current All voltage figures are rms AC 60 rms cps, measured at approximately +25C, 50% rh. For additional performance specifications refer to MIL-C-24308 Test Extracts on page 385. See pages 339 and 340 for complete M24308 cross reference. Non-Magnetic/No-Outgas Options Suffix Code Residual Magnetism Shell Material (Finish) Desired Results NMB 200 Gamma Residual Magnetism Insulator. (Diallyl Phtalate per MIL-M-14 type SDG-F, color white.) Bras Shells Per QQ-B-613 (Yellow Chromate over Cadmium per QQ-P-416. Type II, Class 2.) Non-Magnetic No-Outgas NMB-K52 200 Gamma Residual Magnetism Insulator. (Diallyl Phtalate per MIL-M-14 type SDG-F, color white.) Brass Shells Per QQ-B-613 (Gold over copper per MIL-G-45204, Type II, Grade C, Class 1 over copper per MIL-C-14550.) Non-Magnetic No-Outgas Note: Look for the NM symbol for orderign information. Contact Arrangements Face View Pin Insert 1 2 6 3 7 Shell Size 4 8 5 1 9 9 E Contact Arrangement Contact Size 2 3 10 4 11 5 12 13 6 7 14 8 1 15 2 3 3 14 15 4 16 5 6 17 18 A 7 8 19 20 9 15 25 #20 #20 5 6 7 8 9 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 27 28 29 C 30 31 32 33 34 35 11 23 12 13 24 25 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 18 Shell Size 10 21 22 #20 4 9 B 1 1 2 36 37 34 35 33 36 37 38 39 40 41 42 43 46 45 46 47 48 49 50 D Contact Arrangement 37 50 Contact Size #20 #20 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 332 Solder Cup D D*M How to Order High Rel-Solder Cup Connectors (contacts are non-removable) Receptacles (Includes Socket Contacts) With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Military Version M24308 Cross Reference 9 (E) DEM9S DEMM9S M24308/1-1 15 (A) DAM15S DAMM15S M24308/1-2 25 (B) DBM25S DBMM25S M24308/1-3 37 (C) DCM37S DCMM37S M24308/1-4 50 (D) DDM50S DDMM50S M24308/1-5 Plugs (Includes Pin Contacts)* With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Mounting Options Avalable: 4-40 Clinch Nut - Add "E" to Part Number After "M" 4-40 Fload Mount - Add "Y" to Part Number After "M" (Can be used in front or rear panel mount applications) M24308 Cross Reference Military Version 9 (E) DEM9P DEMM9P M24308/3-1 15 (A) DAM15P DAMM15P M24308/3-2 25 (B) DBM25P DBMM25P M24308/3-3 37 (C) DCM37P DCMM37P M24308/3-4 50 (D) DDM50P DDMM50P M24308/3-5 Example: DBME25S DEMY9P DBMME25S DEMMY9P NM Non-Magnetic/No Outgas-Add desired suffix code with desired option to end of part number. Example: DEMA9PSNMB DEMA9PSNMB-K52 Performance Specifications - Page 332. Dimensions - High Rel Solder Cup Connectors M L B* 10 TYP. K B' D' + G J D* + H E .390 (9.91) MAX. C A Rear Front Part Number by Shell Size A +_ .015 (0.38) B* +_ .005 (0.13) D' +_ .005 (0.13) E +_ .015 (0.38) G +_ .010 (0.25) H +_ .010 (0.25) J +_ .010 (0.25) DEM-9P 1.213 (30.81) - .666 (16.91) .984 (24.99) DEM-9S 1.213 (30.81) .643 (16.33) - .984 (24.99) - .329 (8.36) .494 (12.55) .759 (19.28) .422 (10.72) .311 (7.90) - .494 (12.55) .759 (19.28) .422 (10.72) DAM-15P 1.541 (39.14) - .994 (25.24) 1.312 (33.32) - .329 (8.36) .494 (12.55) 1.083 (27.51) DAM-15S 1.541 (39.14) .971 (24.66) - 1.312 (33.32) .311 (7.90) - .494 (12.55) DBM-25P 2.088 (53.03) - 1.534 (38.96) 1.852 (47.04) - .329 (8.36) DBM-25S 2.088 (53.03) 1.511 (38.38) - 1.852 (47.04) .311 (7.90) DCM-37P 2.729 (69.31) - 2.182 (55.42) 2.500 (63.50) DCM-37S 2.729 (69.31) 2.159 (54.84) - DDM-50P 2.635 (66.92) DDM-50S 2.635 (66.92) 2.064 (52.43) - B' +_ .005 (0.13) C + _ .005 (0.31) D* +_ .005 (0.13) K + _ .006 (0.15) L +_ .013 (0.33) M +_ .010 (0.25) .030 (0.76) .235 (5.94) .048 (1.22) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) 1.083 (27.51) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .494 (12.55) 1.625 (41.27) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) - .494 (12.55) 1.625 (41.27) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) - .329 (8.36) .494 (12.55) 2.272 (57.71) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) 2.500 (63.50) .311 (7.90) - .494 (12.55) 2.272 (57.71) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) 2.079 (52.81) 2.406 (61.11) - .441 (11.20) .605 (15.37) 2.178 (55.32) .534 (13.56) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) - 2.406 (61.11) .423 (10.74) - .605 (15.37) 2.178 (55.32) .534 (13.56) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) *Dimensions B, D, G, and H are measured as outside dimensions at the bottom of the draw. NOTE: B* and D* are teh D.D. dims for socket side B' and D' are the I. D. dims. for pin side Mountign Option Dimensions - Crimp Components .070 (1.78) MAX. .031 (0.79) +_ .005 (0.13) .103 (2.62) +_ .023 (0.58) .120 +_ .005 (305 + _ 0.13) .130 (3.30) MAX. .049 (1.24) MAX. .089 (2.26) +_ .003 (0.08) DIA. .049 (1.24) MAX. Standard-Through-Hole CLINCH NUT NO. 4 (.112) 40 UNC E-Clinch Nut RIVET .031 (0.79) TOTAL DIAMETRICAL FLOAT WASHER OVERALL FREE FLOAT .004-.012 (0.10)-(0.30) Y Float Mount It is recommended that only one assembly, either pin or socket, be float mounted. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 333 Crimp Snap D D*MA How to Order - Crimp Connectors (contacts are removable) Receptacles (Includes Socket Contacts) With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Military Version M24308 Cross Reference 9 (E) DEMA9S DEMAM9S M24308/2-1 15 (A) DAMA15S DAMAM15S M24308/2-2 25 (B) DBMA25S DBMAM25S M24308/2-3 37 (C) DCMA37S DCMAM37S M24308/2-4 50 (D) DDMA50S DDMAM50S M24308/2-5 Plugs (Includes Pin Contacts)* With .120" Through-Mounting Holes Number of Contacts (Shell Size) Standard Military Version M24308 Cross Reference 9 (E) DEMA9P DEMAM9P M24308/4-1 15 (A) DAMA15P DAMAM15P M24308/4-2 25 (B) DBMA25P DBMAM25P M24308/4-3 37 (C) DCMA37P DCMAM37P M24308/4-4 50 (D) DDMA50P DDMAM50P M24308/4-5 To receive these connectors without contacts. add "F0" to end of part number. Example: DBMA25SF0, DBMAM25SF0. NM Non-Magnetic/No Outgas-Add desired suffix code with desired option to end of part number. Example: DEMA9PSNMB DEMA9PSNMB-K52 Crimp Connectors without contacts, add F0 to end of the part number and change K52 to K47. Mounting Options Avalable: 4-40 Clinch Nut - Add "E" to Part Number After "M" or "A" 4-40 Fload Mount - Add "Y" to Part Number After "M" or "A" (Can be used in front or rear panel mount applications) Assembly Instructions - Page 363. Performance Specifications - Page 332. Example: DBMAE25S DBMAM255 DEMAY9P DBMAMY9P Dimensions - Crimp Connectors M L B* J D* + + 10 TYP. G K D' B' H E X MAX. C A Rear Front Part Number by Shell Size A +_ .015 (0.38) B* + _ .005 (0.13) B' +_ .005 (0.13) C D* +_ .005 (0.13) +_ .005 (0.13) D' + _ .005 (0.13) E +_ .015 (0.38) G +_ .010 (0.25) H +_ .010 (0.25) J +_ .010 (0.25) K +_ .006 (0.15) L +_ .013 (0.33) M +_ .010 (0.25) X Max. DEMA-9P 1.213 (30.81) - .666 (16.91) .984 (24.99) - .329 (8.36) .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) .345 (8.76) DEMA-9S 1.213 (30.81) .643 (16.33) - .984 (24.99) .311 (7.90) - .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DAMA-15P 1.541 (39.14) - .994 (25.24) 1.312 (33.32) - .329 (8.36) .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) .345 (8.76) DAMA-15S 1.541 (39.14) .971 (24.66) - 1.312 (33.32) .311 (7.90) - .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DBMA-25P 2.088 (53.03) - 1.534 (38.96) 1.852 (47.04) - .329 (8.36) .494 (12.55) 1.625 (41.27) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DBMA-25S 2.088 (53.03) 1.511 (38.38) - 1.852 (47.04) .311 (7.90) - .494 (12.55) 1.625 (41.27) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DCMA-37P 2.729 (69.31) - 2.182 (55.42) 2.500 (63.50) - .329 (8.36) .494 (12.55) 2.272 (57.71) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DCMA-37S 2.729 (69.31) 2.159 (54.84) - 2.500 (63.50) .311 (7.90) - .494 (12.55) 2.272 (57.71) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) DDMA-50P 2.635 (66.92) - 2.079 (52.81) 2.406 (61.11) - .441 (11.20) .605 (15.37) 2.178 (55.32) .534 (13.56) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .345 (8.76) DDMA-50S 2.635 (66.92) 2.064 (52.43) - 2.406 (61.11) .423 (10.74) - .605 (15.37) 2.178 (55.32) .534 (13.56) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) .345 (8.76) Mountign Option Dimensions - Crimp Components .070 (1.78) MAX. .031 (0.79) +_ .005 (0.13) .103 (2.62) +_ .023 (0.58) .120 +_ .005 (3.05 +_ 0.13) .130 (3.30) MAX. .049 (1.24) MAX. .089 (2.26) +_ .003 (0.08) DIA. .049 (1.24) MAX. Standard-Through-Hole CLINCH NUT NO. 4 (.112) 40 UNC E-Clinch Nut RIVET .031 (0.79) TOTAL DIAMETRICAL FLOAT WASHER OVERALL FREE FLOAT .004-.012 (0.10)-(0.30) Y Float Mount It is recommended that only one assembly, either pin or socket, be float mounted. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 334 Crimp Snap D D*MA High Rel Crimp Contacts NM MATERIALS AND FINISHES Contact Size Wire Size Accom. Standard Finish Pin Socket Military Finish Pin Socket NMB Pin Socket 20 20, 22, 24 330-5291-000 031-1007-000 330-5291-037 031-1007-042 330-5291-037 031-1007-057 20-18 1 #18 & 2 #22 330-5291-001 031-1007-001 330-5291-055 031-1007-054 - - 20-26 26, 28, 30 330-5291-004 031-1007-004 330-5291-050 031-1007-048 - - 22D 22, 24, 26, 28 030-2042-002* 031-1147-002* - - MIL-C-39029 Cross-Reference Assembly Instructions - Page 363 Contact Size Wire Size Accom. M39029 M24308 Cannon Part No. 20 Pin 20/22/24 /64-369 /11-1 330-5291-037 20 Socket 20/22/24 /36-368 /10-1 031-1007-042 22D Pin 24/26/28 /58-360 /13-1 030-2042-000 22D Socket 22/24/26/28 /57-354 /12-1 031-1147-000 *50 microinch AU over copper, no stripes. Tooling Insertion/Extraction Tools CIET-20HD Plastic Insertion/Extraction Plastic Extraction Contact Size AWG 20 20, 22, 24 980-2000-426 CIET-20HD 323-7010-000 2026 26, 28, 30 980-2000-426 CIET 20HD 323-7010-000 CET-20-11 1 #18 None None 274-5016-002 CET-20-15 2018 Description Part No. Part No. Description CET-20-11 2 #22 None None 274-5016-002 CET-20-15 22D 22, 24, 26, 28 274-7048-000 CIET 22D None None High Power 12, 16 274-7003-000 CIET 12 None None High Volt #20 274-7003-000 CIET 12 None None Hand Crimp Tools M22520/1-01 Contact Size 20 Semi-Automatic Crimp Machines M22520/2-01 Crimp Tool AWG 20, 22, 24 Part No. Locator Description Part No. Description M22520/2-08 995-0001-584 M22520/2-01 995-0001-604 995-0001-585 M22520/2-01 995-0001-244 TH25 995-0001-584 M22520/2-01 995-0001-325 L3198-20HD 2026 26, 28, 30 2018 1 #18 2 #22 995-0001-584 M22520/2-01 980-0005-722 K250 22D 22, 24, 26, 28 995-0001-584 M22520/2-01 995-0001-739 M22520/2-06 The CBT-646, Vibra-Bowl Crimper is pneumatically powered, electronically controlled machine. It is designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commerical industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. The CBT-646 meets all Mil. Spec. requirements for crimping closed barrel contacts. Machine Crimp Rate: 1300 + per hour Power Requirements: Electrical = 115 Vac., 60 Hz, 5A Pneumatic = 85 psi., 2 cu. ft. per min. Products: Most ITT Cannon Commerical and Aerospace closed barrel contacts, wire sizes 30 thru 12 AWG. (See connector line for part numbers.) CBT-646 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 335 Right Angle D D*M How to Order - High-Rel Printed Circuit Mount Connectors Straight PC Tail, Receptacles (Includes Socktet Contacts) With .120 (3.15) Through-Mounting Holes. PC Tails - .030 (0.76) Diameter .127 (3.23) +_ .027 (0.69) Long Post Number of Contacts (Shell Size) .158 (4.01) +_ .027 (0.69) Long Post Wire Wrap Post - .024 (0.61) Square .183 (4.65) +_ .027 (0.69) Long Post .405 (10.29) +_ .027 (0.69) Long Post (Two Wrap) .530 (13.46) +_ .027 (0.69) Long Post (Three Wrap) 9 (E) Standard DEM9SE DEM9SM DEM9SZ DEM9SF179 DEM9SF179A 9 (E) Military DEMM9SE DEMM9SM DEMM9SZ DEMM9SF179 DEMM9SF179A 15 (A) Standard DAM15SE DAM15SM DAM15SZ DAM15SF179 DAM15SF179A 15 (A) Military DAMM15SE DAMM15SM DAMM15SZ DAMM15SF179 DAMM15SF179A 25 (B) Standard DBM25SE DBM25SM DBM25SZ DBM25SF179 DBM25SF179A 25 (B) Military DBMM25SE DBMM25SM DBMM25SZ DBMM25SF179 DBMM25SF179A 37 (C) Standard DCM37SE DCM37SM DCM37SZ DCM37SF179 DCM37SF179A 37 (C) Military DCMM37SE DCMM37SM DCMM37SZ DCMM37SF179 DCMM37SF179A 50 (D) Standard DDM50SE DDM50SM DDM50SZ DDM50SF179 DDM50SF179A 50 (D) Military DDMM50SE DDMM50SM DDMM50SZ DDMM50SF179 DDMM50SF179A NM Non-Magnetic/No-Outgas - Add desired suffix code (NMB, NM-K52) to end of part number. Example: DEM95ZNMB-K52 Straight PC Tail, Plug (Includes Pin Contacts) With .120 (3.15) Through-Mounting Holes Wire Wrap Post - .024 (0.61) Square PC Tails - .030 (0.76) Diameter Number of Contacts (Shell Size) .127 (3.23) +_ .027 (0.69) Long Post .158 (4.01) +_ .027 (0.69) Long Post .530 (13.46) + _ .027 (0.69) Long Post (Three Wrap) .405 (10.29) +_ .027 (0.69) Long Post (Two Wrap) .183 (4.65) +_ .027 (0.69) Long Post 9 (E) Standard DEM9PE DEM9PM DEM9PZ DEM9PF179 DEM9PF179A 9 (E) Military DEMM9PE DEMM9PM DEMM9PZ DEMM9PF179 DEMM9PF179A 15 (A) Standard DAM15PE DAM15PM DAM15PZ DAM15PF179 DAM15PF179A 15 (A) Military DAMM15PE DAMM15PM DAMM15PZ DAMM15PF179 DAMM15PF179A 25 (B) Standard DBM25PE DBM25PM DBM25PZ DBM25PF179 DBM25PF179A 25 (B) Military DBMM25PE DBMM25PM DBMM25PZ DBMM25PF179 DBMM25PF179A 37 (C) Standard DCM37PE DCM37PM DCM37PZ DCM37PF179 DCM37PF179A 37 (C) Military DCMM37PE DCMM37PM DCMM37PZ DCMM37PF179 DCMM37PF179A 50 (D) Standard DDM50PE DDM50PM DDM50PZ DDM50PF179 DDM50PF179A 50 (D) Military DDMM50PE DDMM50PM DDMM50PZ DDMM50PF179 DDMM50PF179A NM Non-Magnetic/No-Outgas - Add desired suffix cod (NMB, NM-K52) to end of part number. Example: DEM9PZNMB-K52 Dimensions Printed Circuit Applications Wire Wrapping Applications .235 (6.97) MAX. H MAX. W NOMINAL .030 (0.76) + _ .003 (0.08) TYP. X DIM. *All MIL-C-24308 connectors come with .250 (0.10) lengh spacers. Code (Last Letter of Part Number) Straight X +_ .027 (0.69) E .127 (3.22) M .158 (4.01) Z .183 (4.65) .024 (0.61) SQUARE POST Modification Code Number of Wraps W H F179 2 .405 (10.29) .655 (16.64) F179A 3 .530 (13.46) .780 (19.81) Performance Specificatoins - Page 332. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 336 Right Angle D D*M How to Order - High-Rel Printed Circuit Mount Connectors Right Angle PC Tail Receptacles, With Bracket (.120 (3.15) Though-Holes Only) PC Tails - .030 (0.76) Diameter .127 (3.23) + _ .027 (0.69) Long Post Number of Contacts (Shell Size) .183 (4.65) +_ .027 (0.69) Long Post .158 (4.01) +_ .027 (0.69) Long Post 9 (E) Standard DEM9SD DEM9SL DEM9SS 9 (E) Military DEMM9SD DEMM9SL DEMM9SS 15 (A) Standard DAM15SD DAM15SL DAM15SS 15 (A) Military DAMM15SD DAMM15SL DAMM15SS 25 (B) Standard DBM25SD DBM25SL DBM25SS 25 (B) Military DBMM25SD DBMM25SL DBMM25SS 37 (C) Standard DCM37SD DCM37SL DCM37SS 37 (C) Military DCMM37SD DCMM37SL DCMM37SS 50 (D) Standard DDM50SD DDM50SL DDM50SS 50 (D) Military DDMM50SD DDMM50SL DDMM50SS NM Non-Magnetic/No-Outgas - Add desired suffix cod (NMB, NM-K52) to end of part number. Example: DEM9SLNMB-K52 Right Angle PC Tail Plug, With Bracket (.120 (3.15) Through-Holes Only) PC Tails - .030 (0.76) Diameter Number of Contacts (Shell Size) .127 (3.23) + _ .027 (0.69) Long Post .183 (4.65) +_ .027 (0.69) Long Post .158 (4.01) + _ .027 (0.69) Long Post 9 (E) Standard DEM9PD DEM9PL DEM9PS 9 (E) Military DEMM9PD DEMM9PL DEMM9PS 15 (A) Standard DAM15PD DAM15PL DAM15PS 15 (A) Military DAMM15PD DAMM15PL DAMM15PS 25 (B) Standard DBM25PD DBM25PL DBM25PS 25 (B) Military DBMM25PD DBMM25PL DBMM25PS 37 (C) Standard DCM37PD DCM37PL DCM37PS 37 (C) Military DCMM37PD DCMM37PL DCMM37PS 50 (D) Standard DDM50PD DDM50PL DDM50PS 50 (D) Military DDMM50PD DDMM50PL DDMM50PS NM Non-Magnetic/No-Outgas - Add desired suffix cod (NMB, NM-K52) to end of part number. Example: DDM9SLNM-K52 Dimensions-Right Angle 90 D Subminiature Connectors with brackets cannot be ordered with float mounts or clinch nuts. .340 (8.64) CENTERLINE OF .395 (10.03), TG.HOLE .283 (7.19) .283 (7.19) 2ND ROW 3RD ROW 2ND ROW 1ST ROW 1ST ROW X DIM X DIM .030 +_ .003 (0.76 +_ 0.08) TYP. .112 +_ .015 (2.84 + _ 0.38) TYP. .112 + _ 0.15 (2.84 +_ 0.38) TYP. DE, DA, DB, DC Sizes .030 +_ .003 (0.76 +_ 0.08) TYP. DD Size Right Angle With Bracket X +_ .027 (0.69) D * .127 (3.22) L * .158 (4.01) S * .183 (4.65) Code Last Letter of P/N's Performance Specificatoins - Page 332. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 337 Straight and Right Angle D D*M PC Board Hole Patterns 2.500 (63.50) .984 (24.99) .978 (24.84) .870 (22.10) .216 (5.49) .108 (2.74) .761 (19.33) .652 (16.56) .544 (13.82) .435 (11.05) .326 (8.28) 2 HOLES .120 DIA. (3.05) 37 HOLES .045 DIA. (1.14) .112 (2.84) 9 HOLES .045 DIA. (1.14) .218 (5.54) .054 (1.37) .109 (2.77) .162 (4.11) DE Size 9 Positions .055 (1.40) .112 (2.84) .163 (4.14) 2 HOLES .120 DIA. (3.05) .272 (6.91) .381 (9.68) .489 (12.42) .598 (15.19) 1.312 (33.32) .378 (9.60) .270 (6.68) .707 (17.96) .162 (4.11) .815 (20.70) .054 (1.37) .924 (23.47) 2 HOLES .120 DIA. (3.05) .108 (2.74) .112 (2.84) DC Size 37 Positions 15 HOLES .045 (1.14) DIA. .216 (5.49) .324 (8.23) 2.406 (61.11) DA Size 15 Positions .870 (22.10) .761 (19.33) .652 (16.56) 50 HOLES .045 DIA. (1.14) 1.852 (47.04) .544 (13.82) .652 (16.56) .435 (11.05) .544 (13.82) .435 (11.05) .326 (8.28) .218 (5.54) .109 (2.77) .326 (8.28) .218 (5.54) .112 (2.84) .109 (2.77) .055 (1.40) .224 (5.69) .163 (4.14) .055 (1.40) 25 HOLES .045 DIA. (1.14) .163 (4.41) .272 (6.91) .381 (9.68) .489 (12.42) .598 (15.19) .112 (2.84) 2 HOLES .120 DIA. (3.05) 2 HOLES .120 DIA. (3.05) .272 (6.91) .381 (9.68) .489 (12.42) .598 (15.19) .707 (17.96) .815 (20.70) DB Size 25 Positions DD Size 50 Positions Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 338 High Reliability, Military D Subminiature D*M MIL-C-24308 Cross Reference Military Part Number Cannon Part Number Military Part Number Cannon Part Number Military Part Number Cannon Part Number M24308/1-1 M24308/1-2 M24308/1-3 M24308/1-4 M24308/1-5 DEMM9S DAMM15S DBMM25S DCMM37S DDMM50S M24308/2-485 M24308/2-486 M24308/3-1 M24308/3-2 M24308/3-3 DCMAMY37S-F0 DDMAMY50S-F0 DEMM9P DAMM15P DBMM25P M24308/6-5 M24308/6-6 M24308/6-7 M24308/6-8 M24308/6-9 DDMAM50SNM DEMAMT9SNM DAMAMT15SNM DBMAMT25SNM DCMAMT37SNM M24308/1-12 M24308/1-13 M24308/1-14 M24308/1-15 M24308/1-16 DEMMF9s DAMMF15S DBMMF25S DCMMF37S DDMMF50S M24308/3-4 M24308/3-5 M24308/3-12 M24308/3-13 M24308/3-14 DCMM37P DDMM50P DEMMF9P DAMMF15P DBMMF25P M24308/6-10 M24308/6-15 M24308/6-259 M24308/6-260 M24308/6-261 DDMAMT50SNM DDMAM78SNM DEMAMF9SNM DAMAMF15SNM DBMAMF25SNM M24308/1-23 M24308/1-24 M24308/1-25 M24308/1-26 M24308/1-27 DEMMY9S DAMMY15S DBMMY25S DCMMY37S DDMMY50S M24308/3-15 M24308/3-16 M24308/4-1 M24308/4-2 M24308/4-3 DCMMF37P DDMMF50P DEMAM9P DAMAM15P DBMAM25P M24308/6-262 M24308/6-263 M24308/6-268 M24308/6-270 M24308/6-271 DCMAMF37SNM DDMAMF50SNM DDMAMF78SNM DEMAMFT9SNM DAMAMFT15SNM M24308/2-1 M24308/2-2 M24308/2-3 M24308/2-4 M24308/2-5 DEMAM9S DAMAM15S DBMAM25S DCMAM37S DDMAM50S M24308/4-4 M24308/4-5 M24308/4-6 M24308/4-7 M24308/4-8 DCMAM37P DDMAM50P DEMAMT9P DAMAMT15P DBMAMT25P M24308/6-272 M24308/4-5 M24308/4-6 M24308/4-7 M24308/4-8 DBMAMFT25SNM DEMAMFT37SNM DDMAMFT50SNM DEMAM9SNM-F0 DAMAM15SNM-F0 M24308/2-6 M24308/2-7 M24308/2-8 M24308/2-9 M24308/2-10 DEMAMT9S DAMAMT15S DBMAMT25S DCMAMT37S DDMAMT50S M24308/4-9 M24308/4-10 M24308/4-15 M24308/4-259 M24308/4-260 DCMAMT37P DDMAMT50P DDMAM78P DEMAM9P-F0 DAMAM15P-F0 M24308/4-9 M24308/4-10 M24308/4-15 M24308/4-259 M24308/4-260 DDMAM25SNM-F0 DCMAM37SNM-F0 DDMAM50SNM-F0 DDMAM78SUM-F0 DEMAMF9SNM-F0 M24308/2-15 M24308/2-23 M24308/2-24 M24308/2-25 M24308/2-26 DDMAM78S DEMAMF9S DAMAMF15S DBMAMF25S DCMAMF37S M24308/4-261 M24308/4-262 M24308/4-263 M24308/4-268 M24308/4-302 DBMAM25P-F0 DCMAM37P-F0 DDMAM50P-F0 DDMAM78P-F0 DEMAMF9P M24308/4-261 M24308/4-262 M24308/4-263 M24308/4-268 M24308/4-302 DAMAMF15SNM-F0 DBMAMF25SNM-F0 DCMAMF37SNM-F0 DDMAMF50SNM-F0 DDMAMF78SNM-F0 M24308/2-27 M24308/2-32 M24308/2-34 M24308/2-35 M24308/2-36 DDMAMF50S DDMAMF78S DEMAMFT9S DAMAMFT15S DBMAMFT25S M24308/4-303 M24308/4-304 M24308/4-305 M24308/4-306 M24308/4-311 DAMAMF15P DBMAMF25P DCMAMF37P DDMAMF50P DCMAMF78P M24308/4-303 M24308/4-304 M24308/4-305 M24308/4-306 M24308/4-311 DEMAMY9SNM DAMAMY15SNM DBMAMY25SNM DCMAMY37SNM DDMAMY50SNM M24308/2-37 M24308/2-38 M24308/2-281 M24308/2-282 M24308/2-283 DCMAMFT37S DDMAMFT50S DEMAM9S-F0 DAMAM15S-F0 DBMAM25S-F0 M24308/4-313 M24308/4-314 M24308/4-315 M24308/4-316 M24308/4-317 DEMAMFT9P DAMAMFT15P DBMAMFT25P DCMAMFT37P DDMAMFT50P M24308/4-313 M24308/4-314 M24308/4-315 M24308/4-316 M24308/4-317 DDMEMYT9SNM DAMAMYT15SNM DBMAMYT25SNM DCMAMYT37SNM DDMAMYT50SNM M24308/2-284 M24308/2-285 M24308/2-290 M24308/2-292 M24308/2-293 DCMAM37S-F0 DDMAM50S-F0 DDMAM78S-F0 DEMAMF9S-F0 DAMAMF15S-F0 M24308/4-324 M24308/4-325 M24308/4-326 M24308/4-327 M24308/4-328 DEMAMF9P-F0 DAMAMF15P-F0 DBMAMF25P-F0 DCMAMF37P-F0 DDMAMF50P-F0 M24308/4-324 M24308/4-325 M24308/4-326 M24308/4-327 M24308/4-328 DEMAMY9SNM-F0 DAMAMY15SNM-F0 DBMAMY25SNM-F0 DCMAMY37SNM-F0 DDMAMY50SNM-F0 M24308/2-294 M24308/2-295 M24308/2-296 M24308/2-301 M24308/2-335 DBMAMF25S-F0 DCMAMF37S-F0 DDMAMF50S-F0 DDMAMF78S-F0 DBMAMR25S M24308/4-333 M24308/5-1 M24308/5-2 M24308/5-3 M24308/5-4 DDMAMF78P-F0 DEMM9SNM DAMM15SNM DBMM25SNM DCMM37SNM M24308/7-1 M24308/7-2 M24308/7-3 M24308/7-4 M24308/7-5 DEMM9PNM DAMM15PNM DBMM25PNM DCMM37PNM DDMMS0PNM M24308/2-336 M24308/2-341 M24308/2-342 M24308/2-343 M24308/2-344 DCMAMR37S DAMAMR15S DEMAMY9S DAMAMY15S DBMAMY25S M24308/5-5 M24308/5-12 M24308/5-13 M24308/5-14 M24308/5-15 DDMM50SNM DEMMF9SNM DAMMF15SNM DBMMF25SNM DCMMF37SNM M24308/7-12 M24308/7-13 M24308/7-14 M24308/7-15 M24308/7-16 DEMMF9PNM DAMMF15PNM DBMMF25PNM DCMMF37PNM DDMMF50PNM M24308/2-345 M24308/2-346 M24308/2-353 M24308/2-354 M24308/2-355 DCMAMY37S DDMAMY50S DEMAMYT9S DAMAMYT15S DBMAMYT25S M24308/5-16 M24308/5-23 M24308/5-24 M24308/5-25 M24308/5-26 DDMMF50SNM DDMMY9SNM DAMMY15SNM DBMMY25SNM DCMMY37SNM M24308/8-1 M24308/8-2 M24308/8-3 M24308/8-4 M24308/8-5 DEMAM9PNM DAMAM15PNM DBMAM25PNM DCMAM37PNM DDMAM50PNM M24308/2-356 M24308/2-357 M24308/2-482 M24308/2-483 M24308/2-484 DCMAMYT37S DDMAMYT50S DEMAMY9S-F0 DEMAMY15S-F0 DEMAMY25S-F0 M24308/5-27 M24308/6-1 M24308/6-2 M24308/6-3 M24308/6-4 DDMMY50SNM DEMAM9SNM DAMAM15SNM DBMAM25SNM DCMAM37SNM M24308/8-6 M24308/8-7 M24308/8-8 M24308/8-9 M24308/8-10 DEMAMT9PNM DAMAMT15PNM DBMAMT25PNM DCMAMT37PNM DDMAMT50PNM Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 339 High Reliability, Military D Subminiature D*M MIL-C-24308 Cross Reference (Continued) Military Part Number Cannon Part Number Military Part Number Cannon Part Number Military Part Number Cannon Part Number M24308/8-15 M24308/8-259 M24308/8-260 M24308/8-261 M24308/8-262 DDMAM78PNM DEMAM9PNM-FO DAMAM15PNM-FO DBMAM25PNM-FO DCMAM37PNM-FO M24308/23-8 M24308/23-9 M24308/23-10 M24308/23-11 M24308/23-13 DAMM15SZ DBMM25SZ DCMM37SZ DDMM50SZ DEMM9SH M24308/24-8 M24308/24-9 M24308/24-10 M24308/24-11 M24308/24-13 DAMM15PZ DBMM25PZ DCMM37PZ DDMM50PZ DEMM9PH M24308/8-263 M24308/8-269 M24308/8-302 M24308/8-303 M24308/8-304 DDMAM50PNM-FO DDMAM78PNM-FO DEMAMF9PNM DAMAMF15PNM DBMAMF25PNM M24308/23-14 M24308/23-15 M24308/23-16 M24308/23-17 M24308/23-19 DAMM15SH DBMM25SH DCMM37SH DDMM50SH DEMM9SX M24308/24-14 M24308/24-15 M24308/24-16 M24308/24-17 M24308/24-19 DAMM15PH DDMM25PH DCMM37SH DDMM50PH DEMM9PX M24308/8-305 M24308/8-306 M24308/8-311 M24308/8-313 M24308/8-314 DCMAMF37PNM DDMAMF50PNM DDMAMF78PNM DEMAMFT9PNM DAMAMFT15PNM M24308/23-20 M24308/23-21 M24308/23-22 M24308/23-23 M24308/23-25 DAMM15SX DBMM25SX DCMM37SX DDMM50SX DEMM9SD M24308/24-20 M24308/24-21 M24308/24-22 M24308/24-23 M24308/24-25 DAMM15FX DBMM25PX DCMM37PX DDMM50PX DEMM9PD M24308/8-315 M24308/8-316 M24308/8-317 M24308/8-324 M24308/8-325 DBMAMFT25PNM DCMAMFT37PNM DDMAMFT50PNM DEMAMF9PNM-FO DAMAMF15PNM-FO M24308/23-26 M24308/23-27 M24308/23-28 M24308/23-29 M24308/23-31 DAMM15SD DBMM25SD DCMM37SD DDMM50SD DEMM9SL M24308/24-26 M24308/24-27 M24308/24-28 M24308/24-29 M24308/24-31 DAMM15PD DBMM25PD DCMM37PD DDMM50PD DEMM9PL M24308/8-326 M24308/8-327 M24308/8-328 M24308/3-333 M24308/9-1 DBMAMF25PNM-FO DCMAMF37PNM-FO DDMAMF50PNM-FO DDMAMF78PNM-FO DEH9P002 M24308/23-32 M24308/23-33 M24308/23-34 M24308/23-35 M24308/23-37 DAMM15SL DBMM25SL DCMM37SL DDMM50SL DEMM9SA M24308/24-32 M24308/24-33 M24308/24-34 M24308/24-35 M24308/24-37 DAMM15PL DBMM25PL DCMM37PL DDMM50PL DEMM9PA M24308/9-2 M24308/9-3 M24308/9-4 M24308/9-5 M24308/9-6 DAH15P002 DBH25P002 DCH37P002 DDH50P002 DEH9P001 M24308/23-38 M24308/23-39 M24308/23-40 M24308/23-41 M24308/23-43 DAMM15SA DBMM25SA DCMM37SA DDMM50SA DEMM9SG M24308/24-38 M24308/24-39 M24308/24-40 M24308/24-41 M24308/24-43 DAMM15PA DBMM25PA DCMM37PA DDMM50PA DEMM9PG M24308/9-7 M24308/9-8 M24308/9-9 M24308/9-10 M24308/9-11 DAH1SP001 DBH25P001 DCH37P001 DDH50P001 DEH9P202 M24308/23-44 M24308/23-45 M24308/23-46 M24308/23-47 M24308/23-49 DAMM15SG DBMM25SG DCMM37SG DDMM50SG DEMM9SS M24308/24-44 M24308/24-45 M24308/24-46 M24308/24-47 M24308/24-49 DAMM15PG DBMM25PG DCMM37PG DDMM50PG DEMM9PS M24308/9-12 M24308/9-13 M24308/9-14 M24308/9-15 M24308/9-16 DAH15P202 DBH25P202 DCH37P202 DDH50P202 DEH9P201 M24308/23-50 M24308/23-51 M24308/23-52 M24308/23-53 M24308/23-55 DAMM15SS DBMM25SS DCMM37SS DDMM50SS DEMM9SW M24308/24-50 M24308/24-51 M24308/24-52 M24308/24-53 M24308/24-55 DAMM15PS DBMM25PS DCMM37PS DDMM50PS DEMM9PW M24308/9-17 M24308/9-18 M24308/9-19 M24308/9-20 M24308/23-1 DAH15P201 DBH25P201 DCH37P201 DDH50P201 DEMM9SM M24308/23-56 M24308/23-57 M24308/23-58 M24308/23-59 M24308/24-1 DAMM15SW DBMM25SW DCMM37SW DDMM50SW DEMM9PM M24308/24-56 M24308/24-57 M24308/24-58 M24308/24-59 M24308/26-1 DAMM15PW DBMM25PW DCMM37PW DDMM50PW D20418-2 M24308/23-2 M24308/23-3 M24308/23-4 M24308/23-5 M24308/23-7 DAMM15SM DBMM25SM DCMM37SM DDMM50SM DEMM9SZ M24308/24-2 M24308/24-3 M24308/24-4 M24308/24-5 M24308/24-7 DAMM15PM DBMM25PM DCMM37PM DDMM50PM DEMM9PZ M24308/26-2 D20418-39 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 340 High Density D D*MA Crimp Printed Circuit (See page 343) (See page 342) Performance and Material Specifications MATERIALS AND FINISHES Standard Military Finish Material Shell Steel per ASTM A-620 Insulator Diallyl phthalate glass-filled per MIL-M-14, type SDG-F color green Material Finish Yellow chromate over cadmium QQ-P-416 Type II Class 2 Steel per ASTM A-620 Yellow chromate over cadmium QQ-P-416 Type II Class 2 Diallyl phthalate glas-filled per MIL-M-14, type SDG-F color green - - Contact Copper alloy Gold over nickel Copper alloy Crimp socket has stainless steel hood Gold 50 microinches minimum thicknes per MIL-G-45204 Type II Grade C Class 1 over copper per MIL-C-14550 Hood: Passivated Float Mount Hardware Stainless steel Passivate per QQ-P-35 Stainless steel Passivate per QQ-P-35 PERFORMANCE SPECIFICATIONS Wire Accommodation (AWG) Crimp-#22-#28 AWG Current Rating #22: 5 Amp Temperature Rating -65C to +150C Contact Resistance After Salt Spray, Millivolt Max. 55 @ 5 Amp test current DIELECTRIC WITHSTANDING VOLTAGE 90 and Straight (Solder/Crimp) Altitude (feet/m) Test Sea Level 70,000/21,336 100,000 1000 325 175 All voltage figures are rms AC 60 rms cps, measured at approximately +25C, 50% rh. For additional performance specifications refer to MIL-C-24308 Test Extracts on page 385. Contact Arrangements Face View Pin Insert 1 78 Shell Size D Contact Arrangement 78 Contact Size #22 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 341 High Density D D*MA How to Order - Crimp Connectors Receptacle (Incudes Socket Contacts) With .120" Through-Mounting Holes Number Contacts (Shell Size) Standard Version 78 (D) DDMA78S Military Version DDMAM78S Plugs (Incudes Pin Contacts)* With .120" Through-Mounting Holes Number Contacts (Shell Size) Standard Version 78 (D) DDMA78P Military Version DDMAM78P Note: 1) To receive the connector without contacts, add "FO" to end of part number. Example: DBMA25SFO, DBMAM25SFO. 2) For loose contacts and tooling see page 5. Mounting Options Available: 4-40 Clinch Nut - ADD "E" to Part Number After "M" or "A" 4-40 Float Mount - Add "Y" to Part Number After "M" or "A" (Can be used in front or rear panel mount applications) Dimensions - Crimp Connectors M L B* D' B 10 TYP. K D* + + G J H E X MAX. C A Front Part Number by Shell Size A +_ .015 (0.38) DDM78P DDM78S Rear B* + _ .010 (0.25) B' +_ .005 (0.13) C +_ .005 (0.13) D* +_ .005 (0.13) D' + _ .010 (0.25) E + _ .015 (0.38) G +_ .010 (0.25) H +_ .010 (0.25) 2.635 (66.92) - 2.079 (52.81) 2.635 (66.92) 2.064 (52.43) - J +_ .010 (0.25) K +_ .006 (0.25) L + _ .013 (0.33) M +_ .010 (0.25) X Max 2.406 (61.11) - .441 (11.20) .605 (15.37) 2.178 (55.32) 2.406 (61.11) .423 (10.41) - .605 (15.37) 2.178 (55.32) .534 (13.56) .039 (0.99) .231 (5.87) .060 (1.52) .426 (10.82) .345 (8.76) .534 (13.56) .030 (0.76) .243 (6.17) .045 (1.14) .429 (10.90) .345 (8.76) Mounting Option Dimensions .103 (2.62) + _ .023 (0.58) .070 (1.78) MAX. .031 (0.79) +_ .005 (0.13) .130 (3.30) MAX. .049 (1.24) MAX. .120 +_ .005 (3.05 +_ 0.13) .031 (0.79) TOTAL DIAMETRICAL FLOAT .089 (2.26) +_ .003 (0.08) DIA. .049 (1.24) MAX. Standard - Through-Hole CLINCH NUT E-Clinch Nut NO. 4 (.112) 40 UNC WASHER OVER ALL FREE FLOAT .004-.012 (0.10)-(0.30) RIVET Y-Float Mount It is recommended that only on assembly, either pin or socket, be float mounted. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 342 High Density D D*MA High Rel Printed Cirucit Mount Connector - Straight PC Tail .345 (8.76) MAX. .020 +_ .003 (0.51 + _ 0.08) TYP X DIM. X= Plug Receptacle .158 + _ .027 (4.01 +_ 0.69) With .120 (3.15) Through-Mounting Holes Number Contacts (Shell Size) NM NM Plug Non-Magnetic Plug Receptacle Non-Magnetic Receptacle 78 (D) Standard DDMA50913-499 - DDMA50913-500 - 78 (D) Military DDMA50913-439 DDMA50913-445 DDMA50913-440 DDMA50913-446 High Rel 90 PCB Connectors .573 +_ .007 (19.55 + _ 0.17) .158 (4.01) Receptacle .345 (8.76) MAX. .460 (11.68) .440 (11.18) .542 (13.77) .522 (13.26) .082 (2.08) .624 (15.85) .604 (15.34) .706 (17.93) .686 (17.42) DD Plug Connectors with brackets cannot be ordered with float mounts or clinch nuts. Number Contacts (Shell Size) Recaptacle NM NM Non-Magnetic Receptacle Plug Non-Magnetic Plug 78 (0) Standard DDMA50913-467 - DDMA50913-468 - 78 (0) Military DDMA50913-437 DDMA50913-473 DDMA50913-438 DDMA50913-474 High Rel Crimp Contacts Contact Size Wire Size Accommodation 22D Pin 22, 24, 26, 28 22D Socket 22, 24, 26, 28 Cannon Part Number M39029 M24308* Pin Socket /58-360 /13-1 030-2042-00 - /57-354 /12-1 - 031-1147-000 * Superseded by M39029 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 343 High Density D D*MA Straight and 90 Board Hole Patterns 2.406 (61.11) .7125 (18.10) .9025 (22.92) .6175 (15.68) .8075 (20.51) .5225 (13.27) .4275 (10.86) .3325 (8.45) .2375 (6.03) .1425 (3.62) .0475 (1.21) .123 (3.12) .041 (1.04) .095 (2.41) .190 (4.83) 78 x o.035(0.89) .285 (7.24) .380 (9.65) .475 (12.07) .570 (14.48) .760 (19.30) .665 (16.89) .855 (21.72) DD-78 Tooling Hand Tools Contact Size AWG 22D 22, 24, 26, 28 Plastic Insertion/Extraction 274-7048-000 CIET-22D Crimp Tool 995-0001-584 M22520/2-01 Locator 995-0001-739 M22520/2-06 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 344 Combo D(R) Combination D Subminiature connectors are the fastest growing segment of the D Subminiature market. ITT Cannon engineering teams, in keeping pace with the demands of the industry, have developed the broadest selection of combination D Subminiature available. We offer the ability to intergrate signal and coax, high power, and high voltage. You can mix red, green, and blue video lines with signal and up to 40 amps of power in the same package. Design variations of the new Combo D connector, versus other packaging methods, include the proven ITT Cannon polarized "D" shape to prevent mismating; dense, space-saving packaging; and diverse mounting options. Choose from a variety of cable cand printed wiring board selections. Printed wiring board combos come pre-assembled with fixed contacts eliminating the need to buy several componets. This new line of conectors offers you unlimited design versatility. Straight and right angle printed wiring board contacts are available in both coax and high power versions. Performance and Material Specifications CONNECTOR ASSEMBLIES Description Material Finish Shell Steel or Brass Yellow Chromate Cadmium or Gold over Nickel Insulator Thermoplastic or Diallyl Phthalate, UL 94V-0 rated. None Size 20 contacts when applicable Copper alloy 50 inches gold over copper or 100 gold over copper. Bracket Steel Rivnut Steel or Copper alloy Yellow Chromate over Cadmium COAXIAL ASSEMBLY Contacts and shells Copper alloy Gold over nickel or 50 inches gold over copper. Ring, retaining Copper alloy Nickel or Gold Insulator Teflon None U.L. File Number: E8572 DIELECTRIC WITHSTANDING VOLTAGE Altitiude (feet/m) Sea Level Type of Contact 20,000/6096 50,000/15240 70,000/1336 90 Straight 90 Straight 90 Straight 90 Straight 1200 1500 900 1000 600 700 400 500 800 1000 600 650 400 475 275 325 Center Conductor Average Flashover to Coaxial Shell Test Coaxial Shell to Nearest Average Flashover * 1500 * 1500 * 900 * 650 Standard Solder Pot Contact Test * 1000 * 1000 * 600 * 425 High Power contact and/or Average Flashover 1500 1500 1000 1000 500 500 500 500 Coaxial Shell to Plug Shell Test 1000 1000 650 650 325 325 325 #20 Signal Average Flashover 1700 Test 1000 1250 650 750 325 500 475 375 HV Contact to Nearest Average Flashover 3800 3800 2300 2300 900 900 650 650 Contact or to Shell Test 2800 2800 1700 1700 675 675 475 475 All voltage figures are rms AC 60 rms cps, measured at approximately +25C, 50% rh. Impedance: 50 ohm PERFORMANCE DATA Signal Contact Current Rating 5 Amp Temperature Rating -65C to+150C Signal Contact Resistance 55 @ 7.5 Amp millivolt max test current 50 ohm Coax Impedance Coax VSWR Less than 1.3-1.0 up to 500 Coax Insertion Loss .1 db loss at 500 megahertz. megahertz See Commerical D Subminiature catalog for additional Combo D options. including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 345 Combo D(R) - Coaxial/ 75 and 50 Ohm Coaxial Housing With Solder Cup Signal Contacts NM Military Socket Layout NM Non-Magnetic Socket Military Pin Non-Magnetic Pin DE-5W1 DEMM5W1S DMM5W1P DEM5W1S-NMB-K52 DEM5W1P-NMB-K52 DA-7W2 DAMM7W2S DAMM7W2P DAM7W2S-NMB-K52 DAM7W2P-NMB-K52 DA-11W1 DAMM11W1S DAMM11W1P DAM11W1S-NMB-K52 DAM11W1P-NMB-K52 DA-3W3 DAMM3W3S DAMM3W3P DAM3W3S-NMB-K47 DAM3W3P-NMB-K47 DB-5W5 DBMM5W5S DBMM5W5P DBM5W5S-NMB-K47 DBM5W5P-NMB-K47 DB-9W4 DBMM9W4S DBMM9W4P DBM9W4S-NMB-K52 DBM9W4P-NMB-K52 DB-13W3 DBMM13W3S DBMM13W3P DBM13W3S-NMB-K52 DBM13W3P-NMB-K52 * Cable combinations supplied with preloaded solder signal contacts * 50 ohm coax contacts supplied separately (see pages 347-348) DB-17W2 DBMM17W2S DBMM17W2P DBM17W2S-NMB-K52 DBM17W2P-NMB-K52 DB-21W1 DBMM21W1S DBMM21W1P DBM21W1S-NMB-K52 DBM21W1P-NMB-K52 DC-8W8 DCMM8W8S DCMM8W8P DCM8W8S-NMB-K47 DCM8W8P-NMB-K47 DC-13W6 DCMM13W6S DCMM13W6P DCM13W6S-NMB-K52 DCM13W6P-NMB-K52 Clinch Nut and Float Mount Options Available: Add: E = 4-40 Clinch Nut Y = Float Mounting Example: DAMME3W3P DANNT3W3P DC-17W5 DCMM17W5S DCMM17W5P DCM17W5S-NMB-K52 DCM17W5P-NMB-K52 DC-21WA4 DCMM21WA4S DCMM21WA4P DCM21WA4S-NMB-K52 DCM21WA4P-NMB-K52 DC-25W3 DCMM25W3S DCMM25W3P DCM25W3S-NMB-K52 DCM25W3P-NMB-K52 DC-27W2 DCMM27W2S DCMM27W2P DCM27W2S-NMB-K52 DCM27W2P-NMB-K52 DD-24W7 DDMM24W7S DDMM24W7P DDM24W7S-NMB-K52 DDM24W7P-NMB-K52 DD-36W4 DDMM36W4S DDMM36W4P DDM36W4S-NMB-K52 DDM36W4P-NMB-K52 DD-43W2 DDMM43W2S DDMM43W2P DDM43W2S-NMB-K52 DDM43W2P-NMB-K52 DD-47W1 DDMM47W1S DDMM47W1P DDMC47W1S-NMB-K52 DDM47W1P-NMB-K52 Mounting Method Detail - Page 334. Contact Arrangements Note: Color Code - Pin Connector: Red, Socket Connector: Blue (Will accommodate Removable Coax, Power and/or High Voltage Contacts) 1 A1 2 3 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts A1 A2 A1 A3 1 3 4 A3 A2 5 4 10 3 9 2 8 A1 1 7 1 A1 8 6 2 9 A1 A2 A3 A4 A5 1 A6 2 5 3 6 4 A1 3 5 6 7 2 3 14 15 4 A1 A2 4 5 6 7 8 9 10 11 12 13 16 17 18 19 20 21 22 23 24 3 4 5 2 3 4 2 3 4 8 6 5 A1 6 7 7 8 9 10 11 12 5 6 A3 A4 A1 A5 A2 1 A2 8 9 10 A1 A2 A3 A4 A5 A2 A3 A4 A5 A6 2 3 4 5 6 7 8 9 A3 A1 A4 1 A2 4 5 6 7 8 9 1 2 16 17 30 31 3 4 5 6 7 8 18 19 20 21 22 9 10 11 23 24 25 A6 A7 A8 2 3 4 5 6 7 8 9 10 11 A3 C 25W3 22 #20 3 A1 A7 A2 A3 1 2 3 4 5 6 7 8 A4 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 10 11 12 13 14 15 16 17 32 33 34 35 36 37 38 39 40 A4 5 12 13 14 15 16 17 18 19 20 21 22 9 3 2 4 C 8W8 0 8 C 21WA4 17 #20 4 1 2 1 A3 B 9W4 5 #20 4 10 11 12 13 14 15 16 17 9 10 11 12 25 A2 A1 5 16 17 18 19 20 D 36W4 32 #20 4 D 24W7 17 #20 7 A1 4 B 21W1 20 #20 1 A2 13 14 15 16 17 18 19 20 21 22 23 24 3 3 11 12 13 14 15 10 11 12 13 14 15 1 2 B 5W5 0 5 1 C 27W2 25 #20 2 2 1 6 C 17W5 12 #20 5 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts 1 5 9 10 A2 A1 1 A1 3 8 A 11W1 10 #20 1 4 7 7 C 13W6 7 #20 6 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts 2 7 B 17W2 15 #20 2 B 13W3 10 #20 3 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts 1 A2 5 A 7W2 5 #20 2 A 3W3 0 3 E 5W1 4-#20 1 2 4 12 13 14 15 26 27 28 29 41 42 43 44 45 46 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts D 43W2 41 #20 2 D 47W1 46 #20 1 See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 346 Combo D(R) - Coaxial/50 Ohm Cable Combinations - 50 Ohm Coaxial Contacts Color Code: Receptacle - Blue; Plug - Red Straight Crimp Braid B B A D D Crimp/Crimp Gold Over Nickel Plug NM - Non-Magnetic 50 in. Gold Over Copper 50 in. Gold Over Copper Gold Over Nickel Plug DM53740-37* Plug Receptacle (Dimensions include outer sleeve). DM53740 DM53740-17 DM53740-1 DM53740-15 DM53740-36 A Max. B Max. D Min. RG Cable No. Old New .739 (18.8) .945 (24.00) .040 (1.00) 196/U 178B/U .739 (18.8) .945 (24.00) .067 (1.70) 187/U 179B/U .739 (18.8) .945 (24.00) .067 (1.70) - RD316 195/U 180B/U Plug DM53740-35 Plug DM53740-3 DM53740-16 .847 (21.5) 1.037 (26.34) .110 (2.79) Plug DM53740-5 DM53740-18 .847 (21.5) 1.037 (26.34) .125 (3.18) 58/U 58B/U Receptacle DM53742 DM53742-18 .739 (18.8) .945 (24.00) .040 (1.00) 196/U 1788/U DM53742-1 DM53742-16 .739 (18.8) .945 (24.00) .067 (1.70) 187/U 179B/U .739 (18.8) .945 (24.00) .067 (1.70) - RD316 Receptacle DM53742-38* DM53742-37 Receptacle DM53742-36 Receptacle DM53742-3 DM53742-17 .847 (21.5) 1.037 (26.34) .110 (2.79) 195/U 180B/U Receptacle DM53742-5 DM53742-19 .847 (21.5) 1.037 (26.34) .125 (3.18) 58/U 58B/U * Consult factory for center contact crimp tooling. Straight Crimp Braid B B A D D Plug Receptacle NM - Non-Magnetic 50 in. Gold Over Copper 50 in. Gold Over Copper Gold Over Nickel A Max. B Max. D Min. RG Cable No. Old New .739 (18.8) .945 (24.00) .040 (1.00) 196/U 178B/U .739 (18.8) .945 (24.00) .067 (1.70) 187/U 179B/U .739 (18.8) .945 (24.00) .067 (1.70) - RD316 DM53740-5104 .847 (21.5) 1.037 (26.34) .110 (2.79) 195/U 180B/U DM53740-5005 DM53740-5101 .847 (21.5) 1.037 (26.34) .125 (3.18) 58/U 58/U DM53742-5006 DM53742-5092 .739 (18.8) .945 (24.00) .040 (1.00) 196/U 178B/U Receptacle DM53742-5001 DM53742-5089 .739 (18.8) .945 (24.00) .067 (1.70) 187/U 179B/U Receptacle DM53742-5126 .739 (18.8) .945 (24.00) .067 (1.70) - RD316 Receptacle DM53742-5002 DM53742-5091 .847 (21.5) 1.037 (26.34) .110 (2.79) 195/U 180B/U Receptacle DM53742-5004 DM53742-5086 .847 (21.5) 1.037 (26.34) 58/U Plug (Short Type) DM53740-5000 DM53740-5100 .670 (17.0) Receptacle (Short Type) DM53742-5000 DM53742-5085 .670 (17.0) Plug DM53740-5008 DM53740-5105 Plug DM53740-5001 DM53740-5099 Plug DM53740-5145 Plug DM53740-5002 Plug Receptacle DM53740-5147 DM53742-5127 .125 (3.18) 58/U .874 (22.20) .045 (1.14) 196/U 178B/U .874 (22.20) .045 (1.14) 196/U 178B/U D D Right Angle Solder Braid C C A B B Receptacle Gold Over Nickel 50 in. Gold Over Copper A Max. Plug DM53741-5000 DM53741-5059 .530 (13.46) Plug DM53741-5001 DM53741-5062 .530 (13.46) Plug DM53741-5003 DM53741-5063 Plug DM53741-5004 DM53741-5060 Receptacle DM53743-5000 Receptacle Plug B Max. C D Min. RG Cable No. Old New .745 (18.92) .544 (15.10) .040 (1.00) 196/U 178B/U .745 (18.92) .544 (15.10) .067 (1.70) 187/U 188/U 178B/U 316B/U .530 (13.46) .745 (18.92) .630 (16.00) .110 (2.79) 195/U 180B/U .530 (13.46) .745 (18.92) .630 (16.00) .125 (3.18) 58/U 58/U DM53743-5073 .530 (13.46) .745 (18.92) .594 (15.09) .040 (1.00) 196/U 178B/U DM53743-5001 DM53743-5076 .530 (13.46) .745 (18.92) .594 (15.09) .067 (1.70) 187/U 188/U 179B/U 316B/U Receptacle DM53743-5003 DM53743-5077 .530 (13.46) .745 (18.92) .630 (16.00) .110 (2.79) 195/U 180B/U Receptacle DM53743-5004 DM53743-5074 .530 (13.46) .745 (18.92) .630 (16.00) .125 (3.18) 58/U 58B/U Highlighted part numbers indicate standard product; usually available with shorter lead times. See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 347 Combo D(R) - Coaxial/50 Ohm Cable Combinations - 50 Ohm Coaxial Contacts (Continued) (Dimensions include outer sleeve.) Color Code: Receptacle - Blue; Plug - Red Right Angle Crimp Braid D D C C A B B Receptacle Plug Part Number 50 in. Gold Over Copper Gold Over Nickel A Max. B Ref. C RG Cable No. Old New D +_ .005 (0.13) Plug DM53741 DM53741-12 .530 (13.46) .745 (18.92) .594 (15.10) .045 (1.14) 196/U 178B/U Plug DM53741-1 DM53741-11 .530 (13.46) .745 (18.92) .594 (15.10) .072 (1.83) 187/U 179B/U 188/U 316B/U Plug DM53741-3 DM53741-10 .530 (13.46) .745 (18.92) .630 (16.00) .110 (2.79) 195/U 180B/U Plug DM53741-4 DM53741-13 .530 (13.46) .745 (18.92) .630 (16.00) .125 (3.18) 58/U 58B/U Receptacle DM53743-2 DM53743-18 .530 (13.46) .745 (18.92) .594 (15.10) .045 (1.14) 196/U 178B/U Receptacle DM53743-3 DM53743-16 .530 (13.46) .745 (18.92) .594 (15.10) .072 (1.83) 187/U 179B/U 188/U 316B/U Receptacle DM53743-5 DM53743-17 .530 (13.46) .745 (18.92) .630 (16.00) .110 (2.79) 195/U 180B/U Receptacle DM53743-6 DM53743-19 .530 (13.46) .745 (18.92) .630 (16.00) .125 (3.18) 58/U 58B/U Insertion/Extractoin Instructions Coaxial, High Power and High Voltage Contacts Insertion No insertion tool is required. The contact is easily snapped in from the rear of the connector. RED COLOR CODED CONNECTOR ACCEPTS PLUG CONTACS. BLUE COLOR CODED CONNECTORS ACCEPTS RECEPTACLE CONTACTS INSERT FROM TERMINAL END AS SHOWN BELOW. INSERT INSERT PLUG CONTACT D*M PLUG Extraction CET-C6B The CET-C6B tool extracts coaxial, high power and high voltage contacts (Plug and receptacle). Part number 070064-0000. Operating Instructions: To extract the coax contact, hold the tool by the body and insert the tip into the front of the contact cavity until it bottoms and closes the coax retaining ring. Holding the body in this position securely enough to keep coax retaining ring closed, push the plunger; contact will be pushed out of the rear of the assembly. RECEPTACLE CONTACT D*M RECEPTACLE TOOL PLUNGER COAXIAL, H.V., OR POWER CONTACTS D*M PLUG EXTRACT TOOL TIP EXTRACTION TOOL CET-C6B Hand Tool with intergral die set for all coax straight crimp braid. Part Number: 070051-0000 (CCT-DM) See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 348 Combo D(R) - Coaxial/50 Ohm Coax Assembly Instructions Trim Dimensions Straight RG Cable No. O N P Right Angle N O P N 196/U, 178B/U, 187/U 188/U, 179B/U, 316B/U O P .312 (7.92) .250 (6.35) .078 (1.98) .375 (9.52) .234 (5.94) .062 (1.57) 195/U, 180B/U 58/U, 58B/U .375 (9.52) .312 (7.92) .078 (1.98) .422 (10.69) .312 (7.92) .094 (2.39) All tolerances + _ .010 (0.25) Crimp Tooling Tool P/N Description Closure 196/U, 178B/U RG Cable No. 070051-0000 CCT-DM C 187/U, 179B/U 188/U, 316B/U 070051-0000 CCT-DM B 195/U, 180B/U 58/U, 58B/U 070051-0000 CCT-DM A 90 Coaxial OUTER RING INNER SLEEVE OUTER RING SOLDER COAXIAL SHELL CRIMP .SOFT SOLDER .125 (3.18) SOFT SOLDER CAP INTO SHELL AFTER CABLE ASSEMBLY ON 90 TYPE COAXES. Straight Coaxial OUTER RING INNER SLEEVE OUTER RING COAXIAL SHELL SOLDER .SOFT SOLDER .125 (3.18) CRIMP STEP 1: Straight and 90 Coaxials Slide the outer ring over the cable jacket. Trim the cable as specified in the table of Coax Cable Trim Dimensions. Insert the cable dielectric and center conductor into the inside diameter of the inner sleeve. Then solder the center conductor to the coax center contact. STEP 2: Straight and 90 Coaxials Slide the outer ring forward until it is flush with teh coax shell containing the braid between the outer ring and the inner sleeve. For solder types coaxes, soft solder the outer ring to the assembly thru the cross-drilled solder hold. For crimp type coaxes, crimp with the appropriate tool in the area defined. See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 349 Combo D(R) - Coaxial/50 Ohm Right Angle Receptacle for PCB Mounting PCB Layouts - Page 352 Military part numbers come complete with fixed, female, signal and coaxial contacts and right angle brackets. Military part numbers come with coaxial contacts. Non-magnetic part numbers must use coaxial contacts from Page 347 and do not come with brackets. NM Military Layout Non-Magnetic DE-5W1 DEMMP5X1SP DEM5W1SP-NMB-K52 DA-7W2 DAMMP7X2SP DAM7W2SP-NMB-K52 DA-11W1 DAMMP11X1SP DAM11W1SP-NMB-K52 DA-3W3 DAMMP3X3SP DAM3W3SP-NMB-K47 DB-5W5 DBMMP5X5SP DBM5W5SP-NMB-K47 DB-9W4 DBMMP9X4SP DBM9W4SP-NMB-K52 DB-13W3 DBMMP13X3SP DBM13W3SP-NMB-K52 DB-17W2 DBMMP17X2SP DBM17W2SP-NMB-K52 DB-21W1 DBMMP21X1SP DBM21W1SP-NMB-K52 DC-8W8 DCMMP8X8SP DCM8W8SP-NMB-K47 DC-13W6 DCMMP13X6SP DCM13W6SP-NMB-K52 DC-17W5 DCMMP17X5SP DCM17W5SP-NMB-K52 DC-21WA4 DCMMP21XA4SP DCM21WA4SP-NMB-K52 DC-25W3 DCMMP25X3SP DCM25W3SP-NMB-K52 DC-27W2 DCMMP27X2SP DCM27W2SP-NMB-K52 Dimensions A C F B A1 1 H G A2 5 A3 D E 6 J 10 10TYP. 91 89 .470 +_ .013 (11.94 +_ 0.33) .031 +_ .002 (0.79 +_ 0.05) .024 +_ .003 (0.61 +_ 0.08) .340 +_ .010 (8.64 + _ 0.25) 91 89 .030 +_ .003 (0.76 +_ 0.08) DIA. K L NO. 4-40 UNC-2B THREAD .131 (3.33) .340 (8.64) REF. .457 (11.61) .125 +_ .005 (3.18 +_ 0.13) DIA. .283 +_ .010 (7.19 +_ 0.25) .457 +_ .010 (11.61 +_ 0.25) .112 (2.84) .395 (10.03) REF. SOCKET CONNECTOR ASSEMBLY (Female) Shell Size A + _ .015 (0.38) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) DE 1.213 (30.81) DA 1.541 (39.14) .643 (16.33) .984 (24.99) .311 (7.90) .971 (24.66) 1.312 (33.32) .311 (7.90) DB 2.088 (53.03) 1.511 (38.38) 1.852 (47.04) DC 2.729 (69.31) 2.159 (54.84) 2.500 (63.50 E + _ .015 (0.38) F + _ .005 (0.13) G + _ .005 (0.13) H + _ .010 (0.25) J + _ .010 (0.25) K + _ .013 (0.33) L + _ .010 (0.25) .494 (12.55) .429 (10.90) .494 (12.55) .429 (10.90) .243 (6.17) .759 (19.28) .422 (10.72) .048 (1.22) .030 (0.76) .243 (6.17) 1.083 (27.51) .422 (10.72) .048 (1.22) .311 (7.90) .494 (12.55) .030 (0.76) .429 (10.90) .243 (6.17) 1.625 (41.27) .422 (10.72) .048 (1.22) .311 (7.90) .494 (12.55) .039 (0.99) .429 (10.90) .243 (6.17) 2.272 (57.71) .422 (10.72) .048 (1.22) .039 (0.99) See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 350 Combo D(R) - Coaxial/50 Ohm Right Angle Plug for PCB Mounting NM Military Layout Non-Magnetic DE-5W1 DEMMP5X1PP DEM5W1PP-NMB-K52 DA-7W2 DAMMP7X2PP DAM7W2PP-NMB-K52 DA-11W1 DAMM11X1PP DAM11W1PP-NMB-K52 DA-3W3 DAMM3X3PP DAM3W3P-NMB-K47 DB-5W5 DBMM5X5PP DBM5W5P-NMB-K47 DB-9W4 DBMM9X4PP DBM9W4PP-NMB-K52 DB-13W3 DBMM13X3PP DBM13W3PP-NMB-K52 DB-17W2 DBMM17X2PP DBM17W2PP-NMB-K52 DB-21W1 DBMM21X1PP DBM21W1PP-NMB-K52 DC-8W8 DCMM8X8PP DCM8W8P-NMB-K47 Military part numbers come complete with fixed, female, signal and right angle brackets. DC-13W6 DCMM13X6PP DCM13W6PP-NMB-K52 DC-17W5 DCMM17X5PP DCM17W5PP-NMB-K52 Military part numbers come with coaxial contacts. DC-21WA4 DCMM21XA4PP DCM21WA4PP-NMB-K52 DC-25W3 DCMM25X3PP DCM25W3PP-NMB-K52 DC-27W2 DCMM27X2PP DCM27W2PP-NMB-K52 PCB Layouts - Page 352 Non-magnetic part numbers must use coaxial contacts from Page 347 and do not come with brackets. Dimensions A F C H G B 10 TYP. D J E 10TYP. .470 +_ .013 (11.94 +_ 0.33) 2 X 91 89 .024 +_ .003 (0.61 +_ 0.08) .340 +_ .010 (8.64 + _ 0.25) 91 89 .030 +_ .003 (0.76 +_ 0.08) DIA. .031 +_ .002 (0.79 +_ 0.05) K L NO. 4-40 UNC-2B THREAD .131 (3.33) MIN. .125 +_ .005 (3.18 +_ 0.13) DIA. .340 (8.64) REF. SHELL, FRONT GROUNDING (PIN ONLY) .457 +_ .010 (11.61 +_ 0.25) .457 (11.61) .112 (2.84) .283 +_ .010 (7.19 +_ 0.25) .395 (10.03) REF. PLUG CONNECTOR ASSEMBLY (Male) Shell Size A + _ .015 (0.38) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .015 (0.38) F + _ .005 (0.13) G + _ .006 (0.15) DE 1.213 (30.81) DA 1.541 (39.14) DB DC H + _ .010 (0.25) J + _ .010 (0.25) K + _ .013 (0.33) L + _ .010 (0.25) .666 (16.91) .984 (24.99) .329 (8.36) .494 (12.55) .422 (10.72) .994 (25.24) 1.312 (33.32) .329 (8.36) .494 (12.55) .422 (10.72) .236 (5.99) .759 (19.28) .422 (10.72) .048 (1.22) .030 (0.76) .236 (5.99) 1.083 (27.51) .422 (10.72) .048 (1.22) 2.088 (53.03) 1.534 (38.96) 1.852 (47.04) .329 (8.36) .494 (12.55) .030 (0.76) .426 (10.82) .231 (5.87) 1.625 (41.27) .422 (10.72) .060 (1.52) 2.729 (69.31) 2.182 (55.42) 2.500 (63.50) .329 (8.36) .494 (12.55) .039 (0.99) .426 (10.82) .231 (5.87) 2.272 (57.71) .422 (10.72) .060 (1.52) .039 (0.99) See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 351 Combo D(R) - Coaxial Right Angle Printed Circuit Board Hole Patterns Face view, pin insert (for receptacle, hole pattern is a mirror image) 2 X .120 DIA. 2 X .122 +_ .002 DIA. (COMPLAINT EYELET ONLY) 1.312 .324 1.312 1.312 .984 .216 .162 .108 .270 .270 .378 .270 .216 .162 1.37 .100 .056 .200 .112 .056 .034 .045 (3X PER NO. OF COAX CONTACTS) DIA. Z DIA. (PER NO. OF CONTACTS) Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts A 3W3 0 3 E 5W1 4 #20 1 A 7W2 5 #20 2 A 11W1 10 #20 1 1.852 .302 .326 .306 .218 .570 .234 1.852 .381 .570 1.852 .570 .326 .306 .163 .218 .109 .034 .272 .381 .055 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts B 5W5 0 5 .340 (8.64) REF. .163 .272 SHELL FLANGE REF. B 13W3 10 #20 3 B 9W4 5 #20 4 2.500 .618 .381 1.852 1.852 .652 .544 .435 .326 .218 .544 .489 .218 .109 .163 .055 .326 .109 .055 .272 .381 .163 .163 .381 .544 .272 .326 .598 .272 B 17W2 15 #20 2 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts .893 .435 .218 .489 C 21WA4 17 #20 4 B 21W1 20 #20 1 2.500 .888 .100 .358 .900 .600 .350 .100 .150 .650 .400 .978 .870 .623 2.500 .093 .122 2X +_ .002 DIA. .761 .652 .437 .172 .056 .034 .200 .045 DIA. 3X PER NO. OF COAX CONTACTS) Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts C 8W8 0 8 .707 .815 .924 .112 Z DIA. (PER NO. OF CONTACTS) C 13W6 7 #20 6 2.500 .618 2.500 .893 .618 .435 .381 .326 .272 .343 .109 .326 .652 .598 .272 .554 .055 .163 .055 .218 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts .893 .707 .435 .163 C 17W5 12 #20 5 .163 .381 .109 .218 .489 C 25W3 22 #20 3 Size #20 Contact PC Tail Dia. Z Dia. .030 (0.76) .045 (1.14) See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 352 Combo D(R) - Coaxial/50 Ohm Straight Receptacle for PCB Mounting NM Layout PCB Hole Patterns - Pages 354-355 Part numbers come complete with fixed, female, signal and coaxial contacts. Military Non-Magnetic DE-5W1 DEMM5X1SM DEM5X1SM-NM-K52 DA-7W2 DAMM7X2SM DAM7X2SM-NM-K52 DA-11W1 DAMM11X1SM DAM11X1SM-NM-K52 DA-3W3 DAMM3X3SM DAM3X3SM-NM-K52 DB-5W5 DBMM5X5SM DBM5X5SM-NM-K52 DB-9W4 DBMM9X4SM DBM9X4SM-NM-K52 DB-13W3 DBMM13X3SM DBM13X3SM-NM-K52 DB-17W2 DBMM17X2SM DBM17X2SM-NM-K52 DB-21W1 DBMM21X1SM DBM21X1SM-NM-K52 DC-8W8 DCMM8X8SM DCM8X8SM-NM-K52 DC-13W6 DCMM13X6SM DCM13X6SM-NM-K52 DC-17W5 DCMM17X5SM DCM17X5SM-NM-K52 DC-21WA4 DCMM21XA4SM DCM21XA4SM-NM-K52 DC-25W3 DCMM25X3SM DCM25X3SM-NM-K52 DD-24W7 DCMM24X7SM DCM24X7SM-NM-K52 DC-27W2 DCMM27X2SM DCM27X2SM-NM-K52 DD-24W7 DDMM24X7SM DDM24X7SM-NM-K52 DD-36W4 DDMM36X4SM DDM36X4SM-NM-K52 DD-43W2 DDMM43X2SM DDM43X2SM-NM-K52 DD-47W1 DDMM47X1SM DDMC47X1SM-NM-K52 Straight Plug for PCB Mounting (Board Thickness up to .125 [3.18]) NM Layout PCB Hole Patterns - Pages 354-355 Part numbers come complete with fixed, male, signal and coaxial contacts. Military Non-Magnetic DE-5W1 DEMM5X1PM DEM5X1PM-NM-K52 DA-7W2 DAMM7X2PM DAM7X2PM-NM-K52 DA-11W1 DAMM11X1PM DAM11X1PM-NM-K52 DA-3W3 DAMM3X3PM DAM3X3PM-NM-K52 DB-5W5 DBMM5X5PM DBM5X5PM-NM-K52 DB-9W4 DBMM9X4PM DBM9X4PM-NM-K52 DB-13W3 DBMM13X3PM DBM13X3PM-NM-K52 DB-17W2 DBMM17X2PM DBM17X2PM-NM-K52 DB-21W1 DBMM21X1PM DBM21X1PM-NM-K52 DC-8W8 DCMM8X8PM DCM8X8PM-NM-K52 DC-13W6 DCMM13X6PM DCM13X6PM-NM-K52 DC-17W5 DCMM17X5PM DCM17X5PM-NM-K52 DC-21WA4 DCMM21XA4PM DCM21XA4PM-NM-K52 DC-25W3 DCMM25X3PM DCM25X3PM-NM-K52 DC-27W2 DCMM27X2PM DCM27X2PM-NM-K52 DD-24W7 DDMM24X7PM DDM24X7PM-NM-K52 DD-36W4 DDMM36X4PM DDM36X4PM-NM-K52 DD-43W2 DDMM43X2PM DDM43X2PM-NM-K52 DD-47W1 DDMM47X1PM DDM47X1PM-NM-K52 Dimensions .030 +_ .003 (0.76 +_ 0.08) DIA. .131 (3.33) MIN. See Commerical D Subminiature catalog for additional Combo D options, including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 353 Combo D(R) - Coaxial Straight Printed Circuit Board Hole Patterns Face view, pin insert (for receptacle, hole pattern is a mirror image) 1.312 .984 2X O .120 1.312 .100 .216 .162 .108 .054 .270 .200 1.312 .378 .324 .270 .216 .162 .270 .112 .056 Z DIA. (PER NO. OF CONTACTS) .045 DIA. (3X PER NO. OF COAX) A 11W1 10 #20 1 A 7W2 5 #20 2 A 3W3 3 E 5W1 4 #20 1 Shell Size Contact Arrangement No. of Signal Contacts No. of PC Coaxial Contacts 1.852 1.852 1.852 .302 .570 .381 .326 .570 .234 .306 .306 .163 .034 .326 .218 .570 .218 .109 .055 .272 .163 .272 .381 B 13W3 10 #20 3 B 9W4 5 #20 4 B 5W5 5 Shell Size Contact Arrangement No. of Signal Contacts No. of PC Coaxial Contacts 2.500 .618 .893 .707 .435 1.852 .544 .435 .652 .109 .055 .163 .544 .109 .163 .489 .163 .381 .598 .381 .218 .489 C 25W3 22 #20 3 B 21W1 20 #20 1 B 17W2 15 #20 2 .598 .055 .218 .272 .381 .652 .272 .326 .544 .272 Shell Size Contact Arrangement No. of Signal Contacts No. of PC Coaxial Contacts .326 1.852 .356 .218 .978 2.500 .350 .100 .900 .650 .100 .888 .623 .358 .093 2X O .120 .870 .761 .652 .437 .172 Z DIA. (PER NO. OF CONTACTS) .200 .112 .707 .815 .924 .150 .045 DIA. (3X PER NO. OF COAX) .600 .400 .056 2.500 .326 .435 .218 .109 .055 .272 C 13W6 7 #20 6 C 8W8 8 Shell Size Contact Arrangement No. of Signal Contacts No. of PC Coaxial Contacts .435 .326 .618 .343 .218 .109 .163 .381 .893 .618 2.500 C Shell Size 21WA4 Contact Arrangement 17 #20 No. of Signal Contacts No. of PC Coaxial Contacts 4 .055 .272 .163 .381 .893 2.500 C 17W5 12 #20 5 Size No. 20 Contact PC Tail Dia. 2 Dia. .030 (0.76) .045 (1.14) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 354 Combo D(R) - Coaxial Straight Printed Circuit Board Hole Patterns Face view, pin insert (for receptacle, hole pattern is a mirror image) 2.406 (61.11) .870 (22.10) .870 (22.10) .761 (19.33) .810 (20.57) .761 (19.33) COAX CONTACT P.C. TAIL .045 (1.14) DIA. .652 (16.56) .540 (13.72) .270 (6.86) .544 (13.62) .435 (11.05) .810 (20.57) .652 (16.56) .540 (13.72) .544 (13.62) .270 (6.86) .435 (11.05) .326 (8.28) .218 (5.54) .200 (5.08) .326 (8.28) .218 (5.54) .120 (3.05) 2 PLACES .109 (2.77) .109 (2.77) .056 (1.42) .100 (2.54) .112 (2.84) .056 (1.42) .163 (4.14) SIGNAL CONTACT P.C. TAIL .045 (1.14) DIA. .272 (6.91) .381 (9.68) .489 (12.42) .598 (15.19) D 36W4 32 #20 4 D 24W7 17 #20 7 Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts .870 (22.10) .870 (22.10) .810 (20.57) .540 (13.72) .761 (19.33) .761 (19.33) .381 (9.68) .652 (16.56) .544 (13.62) .435 (11.05) .163 (4.14) .055 (1.40) .326 (8.28) .652 (16.56) .272 (6.91) .272 (6.91) .163 (4.14) .055 (1.40) .218 (5.54) .109 (2.77) .109 (2.77) .489 (12.42) .598 (15.19) .489 (12.42) .598 (15.19) .707 (17.96) .815 (20.70) Shell Size Contact Arrangement No. of Signal Contacts No. of Coaxial Contacts .381 (9.68) .326 (8.28) .218 (5.54) .707 (17.96) .810 (20.57) .544 (13.62) .435 (11.05) .815 (20.70) D 43W2 41 #20 2 D 47W1 46 #20 1 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 355 Combo D(R) - High Voltage Coaxial Housings With Solder Cup Signal Contacts High voltage contacts supplied separately. Military Socket Layout NM - Non-Magnetic Military Pin NM - Non-Magnetic Socket Pin DE-5W1 DEMM5W1S DEMM5W1P DEM5W1S-NMB-K52 DEM5W1P-NMB-K52 DA-7W2 DAMM7W2S DAMM7W2P DAM7W2S-NMB-K52 DAM7W2P-NMB-K52 DA-11W1 DAMM11W1S DAMM11W1P DAM11W1S-NMB-K52 DAM11W1P-NMB-K52 DA-3W3 DAMM3W3S DAMM3W3P DAM3W3S-NMB-K47 DAM3W3P-NMB-K47 DB-5W5 DBMM5W5S DBMM5W5P DBM5W5S-NMB-K47 DBM5W5P-NMB-K47 DB-9W4 DBMM9W4S DBMM9W4P DBM9W4S-NMB-K52 DBM9W4P-NMB-K52 Contact Arrangements: Page 346 of Coax section Peformance Specifications: Page 345 of Coax section. DB-13W3 DBMM13W3S DBMM13W3P DBM13W3S-NMB-K52 DBM13W3P-NMB-K52 DB-17W2 DBMM17W2S DBMM17W2P DBM17W2S-NMB-K52 DBM17W2P-NMB-K52 DB-21W1 DBMM21W1S DBMM21W1P DBM21W1S-NMB-K52 DBM21W1P-NMB-K52 Clinch Nut and Float Mount Options Available: Add: E = 4-40 Clinch Nut Y = Float Mounting Example: DAMME3W3P DAMMY3W3P See page 334 for Mouting Method Detail. DC-8W8 DCMM8W8S DCMM8W8P DCM8W8S-NMB-K47 DCM8W8P-NMB-K47 DC-13W6 DCMM13W6S DCMM13W6P DCM13W6S-NMB-K52 DCM13W6P-NMB-K52 DC-17W5 DCMM17W5S DCMM17W5P DCM17W5S-NMB-K52 DCM17W5P-NMB-K52 DC-21WA4 DCMM21WA4S DCMM21WA4P DCM21WA4S-NMB-K52 DCM21WA4P-NMB-K52 DC-25W3 DCMM25W3S DCMM25W3P DCM25W3S-NMB-K52 DCM25W3P-NMB-K52 DC-27W2 DCMM27W2S DCMM27W2P DCM27W2S-NMB-K52 DCM27W2P-NMB-K52 Cable Combinations supplied with preloaded solder signal contacts. High Power Contacts supplied separately, see below. DD-24W7 DDMM24W7S DDMM24W7P DDM24W7S-NMB-K52 DDM24W7P-NMB-K52 DD-36W4 DDMM36W4S DDMM36W4P DDM36W4S-NMB-K52 DDM36W4P-NMB-K52 DD-43W2 DDMM43W2S DDMM43W2P DDM43W2S-NMB-K52 DDM43W2P-NMB-K52 Extraction Tool for High Power Contacts are the same as for 50 Ohm Coaxial Contacts. See page 348. DD-47W1 DDMM47W1S DDMM47W1P DDM47W1S-NMB-K52 DDM47W1P-NMB-K52 High Power Contacts Solder Type .142 +_ .002 (3.61 +_ 0.05) B A B A Receptacle Plug Gold over Nickel 50 in. Gold over Copper Plug DM53745-1 Plug DM53745-7 Plug NM - Non-Magnetic 50 in. Gold over Copper A Max. B Ref. Current Rating (Amps) Wire Size DM53745-28 DM53745-70 .666 (16.92) .866 (22.00) 40 #8 DM53745-27 DM53745-77 .666 (16.92) .866 (22.00) 20 #12 DM53745-8 DM53745-25 DM53745-70 .666 (16.92) .866 (22.00) 10 #16 Receptacle DM53744-1 DM53744-21 DM53744-62 .666 (16.92) .856 (21.74) 40 #8 Receptacle DM53744-6 DM53744-25 DM53744-64 .666 (16.92) .856 (21.74) 20 #12 Receptacle DM53744-7 DM53744-24 DM53744-63 .666 (16.92) .856 (21.74) 10 #16 Crimp Type .824 .804 (20.93) (20.42) .345 .315 (8.75) (8.01) B A Recommended Wire Strip Length Crimp Tooling - Page 357. B Dia. Max. Current Rating (Amps) Wire Size .181 (4.60) .230 (5.84) 40 #8 .100 (2.54) .218 (5.54) 20 #12 DM130340 .067 (1.07) .102 (2.59) 10 #16 DM130341-4 DM130341 .181 (4.60) .230 (5.84) 40 #8 Receptacle DM130342-4 DM130342 .100 (2.54) .218 (5.54) 20 #12 Receptacle DM130343-4 DM130343 .067 (1.07) .102 (2.59) 10 #16 Gold over Nickel 50 in. Gold over Copper Plug DM130338-4 DM130338 Plug DM130339-4 DN130339 Plug DM130340-4 Receptacle A Dia. Max. See Commerical D Subminiature catalong for PCB High Power connectors. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 356 Combo D(R) - High Power Crimp High Power Contact Tooling (For use with Crimp High Power Contacts on Page Crimp Tool/Locator 356) AWG Wire Size Daniels Crimp Tool Tool Setting Number 8-10 M300-BT AWG 8 = 6 AWG 10 = 5 TP968 12-14 M300-BT AWG 12/14 = 1 TP968 FT-8 AWG 16 = 6 AWG 18 = 5 TH554 16-18 Locartor NOTE: Purchase tooling directly from Daniels. Combo D Guide Pin and Socket Installs into any Combo D, size 8 Cavity. This patented guide pin and socket system is ideal for blind mate applications where space is limited. .223 (5.66) .213 (5.41) 1.150 (29.21) REF. .145 (3.68) .135 (3.43) .115 (2.92) REF. .197 (5.00) MIN. .197 (5.01) MIN. .223 (5.55) .213 (5.53) RING, RETAINGING SHELL, RECEPTACLE RING, RETAINING .128 (3.25) .122 (3.10) 2X WASHER, STABILIZING Press Fit Guide Socket P/N DM53744-72 .153 (3.89) .149 (3.78) PCB Guide Pin P/N DM53745-82 Description Guide Pin Guide Socket Material Finish Brass Gold over nickel Copper Alloy Gold over nickel Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 357 Combo D(R) - High Voltage Coaxial Housings With Solder Cup Signal Contacts High voltage contacts supplied separately. Military Socket Layout Contact Arrangements: Page 346 of Coax section Peformance Specifications: Page 345 of Coax section. Clinch Nut and Float Mount Options Available: Add: E = 4-40 Clinch Nut Y = Float Mounting Example: DAMME3W3P DAMMY3W3P Mouting Method Detail - Page 334. Cable Combinations supplied with preloaded solder signal contacts. High Voltage Contacts supplied separately, see below. Extraction Tool for High Voltage Contacts are the same as for 50 Ohm Coaxial Contacts. See page 348. Military Pin DE-5W1 DEMM5W1S DEMM5W1P DA-7W2 DAMM7W2S DAMM7W2P DA-11W1 DAMM11W1S DAMM11W1P DA-3W3 DAMM3W3S DAMM3W3P DB-5W5 DBMM5W5S DBMM5W5P DB-9W4 DBMM9W4S DBMM9W4P DB-13W3 DBMM13W3S DBMM13W3P DB-17W2 DBMM17W2S DBMM17W2P DB-21W1 DBMM21W1S DBMM21W1P DC-8W8 DCMM8W8S DCMM8W8P DC-13W6 DCMM13W6S DCMM13W6P DC-17W5 DCMM17W5S DCMM17W5P DC-21WA4 DCMM21WA4S DCMM21WA4P DC-25W3 DCMM25W3S DCMM25W3P DC-27W2 DCMM27W2S DCMM27W2P DD-24W7 DCMM24W7S DCMM24W7P DD-36W4 DCMM36W4S DCMM36W4P DD-43W2 DCMM43W2S DCMM43W2P DD-47W1 DCMM47W1S DCMM47W1P High Voltage Combination Contacts Wire Accommodation (AWG) Current Rating Straight #20 Max. 5 Amp Temperature Rating B B Plug Receptacle -55C to +125C A Description Contacts Material Finish Copper Alloy Std: Gold over nickel MIL-50 in. Gold over copper Gold over Nickel 50 in. Gold A Max. B Ref. Wire Size Insulator Thermoplastic None Plug DM51157 DM51157-8 .539 (13.69) .734 (18.64) #20 Ring, Retaining Copper Alloy Nickel Receptacle DM51155 DM51155-7 .539 (13.69) .764 (19.41) #20 Right Angle B B A Plug Receptacle Gold over Nickel 50 in. Gold A Max. B Ref. Wire Size Plug DM51157-5000 DM51157-5005 .491 (12.47) .697 (17.70) #20 Receptacle DM51155-5000 DM51155-5004 .491 (12.47) .697 (17.70) #20 Straight PCB A REF CONTACT.SKT. .192 (4.88) DIA. MAX. .225 (5.72) .210 (5.33) DIA. B .065 (1.65) .059 (1.50) DIA. Plug A REF COTNACT, PIN .234 (5.94) .214 (5.44) .145 (3.68) .139 (3.53) DIA. RING. RETAINING. INSULATOR .255 (6.48) .245 (6.22) .192 (4.88) DIA MAX. .225 (5.72) .210 (5.33) DIA. B .065 (1.65) .059 (1.50) DIA. INSULATOR RING, RETAINING Receptacle Standard Finish Military Finish A Plug DM51157-13 DM51157-14 .628 (15.95) .060/.050 (1.52/1.27) B Receptacle DM51155-12 DM51155-13 .660 (16.76) .010/.000 (0.25/0.00) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 358 Environmental D D*D The Cannon D*D Environmental Series is designed to meet the demand for sealed subminiature rectangular plugs with superior vibration and moisture resistance characteristics for aircraft, missile, and ground support equipement applications. Featureing a rugged aluminum shell and peripheral seal, the D*D conenctor meets all applicable requirements of MIL-C-24308. Available in both sol- der and crimp versions, all assemblies are provided with nylon potting cups and dust caps. Solder type contacts are non-removable and are factory-installed. Crimp type connectors utilize the field-proven LITTLE CAESAR(R) rear insertion, rearrelease retention system. PLEASE NOTE: The D*D Series is not intermateable with other D Subminiature connectors. Performance and Material Specifications Shell Aluminum, cadmium plated with yellow chromate supplementary coating. Contacts Solder pot: Copper alloy, gold plated .00002 (0.0005) over nickel .00004 (0.0010). Cirmp type. Copper alloy, gold plated .00002 (0.0005) over nickel .00004 (0.0010) Insulator Diallyl phthalate, per MIL-M-14, Type MDG or SDG-F Contact Termination Solder pot accommodating up to #20 AWG stranded wire. Crimp type accommodating #20, #22 and #24 AWG stranded wire. Socket Type Closed entry Float Mounting Rivets & Washers Stairless steel Passivated per QQ-P-35 Test Data Specifications Voltage Rating All voltage figures are AC (rms). 60 Hz measured at approximately 25.0C 50% RH Insulation Resistance (per MIL-C-24308) Greater than 5,000 megohms, determined in accordance will MIL-STD-202A, Method 302. Contact Voltage Drop 2.67 millivolts, maximum, per amp. Contact Separation Force 1 to 8 ounces when tested in accordance with MIL-C-24308. Air Leakage When properly wired and potted, 1 cubic inch of air per hour max. when subjected to 30 PSI pressure differential in accordance with MIL-C-5015D, Paragraphc 4.5.3.1 Vibration (per MIL-C-24308) Exceeds test requirements of MIL-STD-202A, Method 204, Condition D. Corrosion Resistance (per MIL-C-24308) Exceeds requirements of 50 hour exposure to salt spary in accordance with MIL-STD-202A, Method 101A, Condition B. Moisture Resistance (per MIL-C-24308) Exceeds requirements of MIL-STD-202A. Method 106. Shock Exceeds requirements of MIL-STD-202A, Method 213. Condition G Environmental Seal Effective from full engagement to 1/16 short of full engagement. Contact Retention Force (Crimp type) 8 pounds (35.6 newtons) minimum of first cycles: 5 pounds (22.2 newtons) minimum after tenth cycle. Standard Layout Plugs Measured from cotact-to-contact, and contact-to-shell or unmated condition. AlTITUDE (FEET) Sea Level 20,000 50,000 70,000 Average Flashover 1700 1000 650 500 Test 1250 750 475 375 See Commerical D Subminiature catalog for additional Combo D options. including 75 ohm Coax. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 359 Environmental D D*D How to Order Solder Cup Terminals D A D - 15 S A - SERIES PREFIX SHELL SIZE CLASS CONTACT ARRANGEMENT CONTACT TYPE MOUNTING STYLE MODIFICATION CLASS SERIES PREFIX ITT Cannon Designation MOUNTING STYLE D - Environmental A - Standard mounting holes B - Float mounts supplied CONTACT ARRANGEMENT SHELL SIZE A, B, C, D, E 9, 15, 25, 37, 50 MODIFICATION Consult factory CONTACT TYPE P - Pin S -Socket D Snap-In Crimp Terminals A DA F- 15 P- F0 SERIES PREFIX SHELL SIZE CLASS MOUNTING STYLE CONTACT ARRANGEMENT CONTACT TYPE MODIFICATION SERIES PREFIX CLASS ITT Cannon Designation CONTACT TYPE DA - Enviromental, crimp type SHELL SIZE P - Pin S - Socket MOUNTING STYLE No Designator - Standard mounting F - Float mounts supplied A, B, C, D, E MODIFICATION F0 - Connector supplied less contacts, for othe modifications consult factory. CONTACT ARRANGEMENT 9, 15, 25, 37, 50 Contact Arrangements Faces View Pin Insert 1 2 6 3 7 Shell Size Contact Arrangement Contact Size 4 8 5 1 9 2 9 E 9 #20 3 10 4 11 5 12 13 6 7 14 8 1 15 2 3 4 5 6 3 14 15 4 16 5 7 8 9 10 11 12 13 14 15 16 17 6 17 18 A 15 #20 7 8 19 20 20 21 22 23 24 25 26 27 28 29 C 37 #20 30 31 32 33 34 35 10 21 22 11 23 12 13 24 25 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 18 Shell Size Contact Arrangement Contact Size 9 B 25 #20 1 1 2 36 37 34 35 33 36 37 38 39 40 41 42 43 46 45 46 47 48 49 50 D 50 #20 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 360 Environmental D D*D Shell Dimensions, Standard Mount Receptacle A MAX. E MAX. .061 +_ .005 (1.55 +_ 0.13) .120 +_ .005 DIA. (3.05 +_ 0.13) 2 MTG. HOLES .677 (17.20) MAX. CONTACT EXTENSION .874 (22.20) MAX. N M K+ _ .005 ( +_ .013) P .058 +_ .005 (1.47 +_ .013) L 10 TYP. .109 (2.77) FL. TYP. Plug .061 +_ .005 (1.55 +_ 0.13) E MAX. A MAX. .299 (7.59) MAX. CONACT EXTENSION .904 (22.96) MAX. 10 TYP. M .677 (17.20) .425 +_ .005 (10.80 +_ 0.13) N .120 +_ .005 DIA. (3.05 +_ 0.13) 2 MTG. HOLES K+ _ .005 ( +_ .013) P .109 (2.77) R. TYP .089 +_ .005 (2.26 +_ 0.13) L Float Mount Dimensions Receptacle A MAX. E MAX. .032 (0.81) TOTAL DIA. FLOAT .120 +_ .005 DIA. (3.05 +_ 0.13) 2 MTG. HOLES .677 (17.20) MAX. CONTACT EXTENSION .874 (22.20) MAX. .031 +_ .005 (0.79 +_ 0.13) L M K+ _ .005 ( +_ .013) P .061 +_ .005 (1.55 +_ 0.13) N 10 TYP. .058 +_ .005 (1.47 +_ .013) .109 (2.77) R. TYP. Plug A MAX. .032 (0.81) TOTAL DIA. FLOAT .061 +_ .005 (1.55 +_ 0.13) .299 (7.59) MAX. CONACT EXTENSION E MAX. .904 (22.96) MAX. N .120 +_ .005 DIA. (3.05 +_ 0.13) 2 MTG. HOLES M .677 (17.20) .031 +_ .005 (0.79 +_ 0.13) P .425 +_ .005 (10.80 +_ 0.13) L 10 TYP. K +_ .005 ( +_ .013) .109 (2.77) R. TYP .089 +_ .005 (2.26 +_ 0.13) NOTE: All D*D Environmental plugs and receptacles are provided with dust caps and removable potting cups. Shell Size A Max. E Max. K + _ .005 (0.13) L + _ .010 (0.25) M + _ .010 (0.25) N + _ .010 (0.25) P + _ .010 (0.25) DED-9P .915 (23.24) .596 (15.14) 1.125 (28.58) 1.442 (36.63) .614 (15.60) .825 (20.86) .483 (12.27) DED-9S .915 (23.24) .596 (15.14) 1.125 (28.58) 1.442 (36.63) .614 (15.60) .825 (20.86) .483 (12.27) DAD-15P 1.233 (31.32) .596 (15.14) 1.437 (36.50) 1.755 (44.58) .614 (15.60) 1.143 (29.03) .483 (12.27) DAD-15S 1.233 (31.32) .596 (15.14) 1.437 (36.50) 1.755 (44.58) .614 (15.60) 1.143 (29.03) .483 (12.27) DBD-25P 1.786 (45.36) .596 (15.14) 1.993 (50.62) 2.295 (58.29) .614 (15.60) 1.683 (42.75) .483 (12.27) DBD-25S 1.786 (45.36) .596 (15.14) 1.993 (50.62) 2.295 (58.29) .614 (15.60) 1.683 (42.75) .483 (12.27) DCD-37P 2.458 (62.43) .567 (14.40) 2.625 (66.68) 2.937 (74.60) .614 (15.60) 2.343 (59.51) .483 (12.27) DCD-37S 2.458 (62.43) .567 (14.40) 2.625 (66.68) 2.937 (74.60) .614 (15.60) 2.343 (59.51) .483 (12.27) DDD-50P 2.390 (60.71) .680 (17.27) 2.531 (64.29) 2.859 (72.62) .735 (18.67) 2.251 (57.18) .596 (15.14) DDD-50S 2.390 (60.71) .680 (17.27) 2.531 (64.29) 2.859 (72.62) .735 (18.67) 2.251 (57.18) .596 (15.14) All tolerances are + _ .010 (0.24) unless noted otherwise. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 361 Environmental D D*D Mounting Dimensions .189 +_ .015 (4.80 +_ 0.38) REAR .292 +_ .010 (7.42 +_ 0.25) PLUG .324 +_ .010 (8.23 +_ 0.25) .133 + _ .010 (3.38 + _ .025) FRONT PLUG RECEPT Figure 1 RECEPT Figure 2 Figure 3 Figure 4 4-40 NC2A THREAD .280 +_ .013 (7.11 +_ 0.32) .230 +_ .013 (5.85 +_ 0.32) .230 +_ .013 (5.85 +_ 0.32) PLUG .194 + _ .008 (4.94 + _ 0.19) PLUG RECEPT RECEPT Figure 5 NOTE: Max panel thickness is .125 (3.17) for non-floating rear panel mounting. 1. With both connectors rear mounted, ues #4-40 flat head screws flush with the panel (Fig. 1). 2. With both connectors front mounted, use #4-40 binder or pan head screws (Fig. 2). 3. With both connectors rear mounted (float rivets on plug assembly side); use #4-40 flat head scerws, flush with the panel (Fig. 3). 4. With both connecotrs front mounted (plug assembly has float mounting screw), use #4-40 binder or pan head screws for receptacle assembly (Fig. 4) Figure 6 Figure 8 Figure 7 5. With plug assembly front mounted and receptacle assembly rear mounted, use hardware from Figures 5 and 6. 6. With plug assembly front mounted and receptacle assembly rear mounted (plug assembly has float mounting screw), use hardware fron figure 1 for receptacle assembly. * Dimensions between panels represent the recommended limit to be used in the design of the connector mounting method. 7. With plug assembly rear mounted and receptaccle assembly front mounted, use hardware from Figures 1 and 2. 8. With plug assembly rear mounted (float rivets) and receptacle assembly front mounted, use hardware from Figures 2 and 3. 9. Electrical contact engagement when mounted per Figure 1 is .046 (1.17) min./.070(1.78) max. NOTE: Float rivets are for rear mounting only and float screw for front mounting only. (Specify when ordering.) Panel Cutouts USE .120(3.05) DIA. HOLE OR 4-40 TAP (CUSTOMER PREFERENCE) FOR FRONT MOUNTING. FOR REAR MOUNTING USE .120(3.05) DIA. HOLE COUNTERSUNK FOR FLATHEAD SCREW. .083(2.11) R. MAX. TYPICAL F E D C A Shell Size A + _ .010 (0.25) C Min. D + _ .010 (0.25) E Min. F + _ .006 (0.15) DED-9 1.442 (36.63) .839 (21.31) .614 (15.60) .497 (12.62) 1.125 (28.58) DAD-15 1.755 (44.58) 1.157 (29.39) .614 (15.60) .497 (12.62) 1.437 (36.50) DBD-25 2.295 (58.29) 1.697 (43.10) .614 (15.60) .497 (12.62) 1.993 (50.62) DCD-37 2.937 (74.60) 2.357 (59.87) .614 (15.60) .497 (12.62) 2.625 (66.68) DDD-50 2.859 (72.62) 2.265 (57.53) .735 (18.67) .610 (15.49) 2.531 (64.29) Add .032 (0.81) to dimensions C and E for float mounting. Note: Panel cutout does not allow for potting cup clearance. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 362 Environmental D D*D Contact Crimping Information Semi-Automatic Crimp Machines Crimp Type Contacts Contact Size Wire Size Accom. Pin Standard Finish Socket 20 20, 22, 24 330-5291-015 031-1007-000 Pin Military Finish Socket 330-5291-079 Insertion/Extraction Tools CIET-20HD Plastic Insertion/Extraction Contact Size AWG 20 20, 22, 24 Part No. 20 Plastic Extraction Description 980-2000-426 Hand Crimp Tools Contact Size 031-1007-042 CIET-20HD Part No. Description 323-7010-000 CET-20-11 M22520/1-01 M22520/2-01 Crimp Tool AWG 20, 22, 24 CBT-646 The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electoronically controlled machine. It is designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is actuated automatically upon insertion of a pre-stripped stranded or single conductor wire. The CBT-646 meets all Mil. Spec. requirements for crimping closed barrel contacts. Locator Part No. Description Part No. 995-0001-584 M22520/2-01 995-0001-604 M22520/2-08 995-0001-585 M22520/1-01 995-0001-244 TH25 Description Machine Crimp Rage: 1300 + per hour Power Requirements: Electrical = 115 Vac, 60 Hz, 5A Pneumatic = 85 psi, 2 cu. ft. per min. Products: Most ITT Cannon Commercial and Aerospace closed-barrel contacts, wire sizes 30 thru 12 AWG. See connector line for part numbers. Assembly Instructions Wire StrippingMachined Contacts Contact Crimping Contact Insertion A A Min. Max. .188 (4.78) .208 (5.28) 1. Cut wires to length. Strip insulation per above illustration. Check for broken or frayed wires. 2. Insert contact and wires into poper crimp tool (and locator, if 3. Center wired contact in groove of insertion tool with tool tip required). Crimp contact to wires. Inspect crimp. butting contact shoulder. Insert contact into cavity until a positive stop is felt. Inspection insertion. Contact Extraction 4. To be sure contact is locked securely, pull back lightly on wire. Repeat for balance of contacts working row by row across the insulator. 5. Place wire into extraction tool tip. 6. Insert tool tip into contact cavity until tip bottoms against contact shoulder, releasing tines. Hold wires against tool with finger and remove tool and contact. Repeat for balance of contacts. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 363 Grommet D GD* ITT Cannon developed GD* connectors to meet the needs of the avionics industry. These connectors provide high-density and moisture protection. Environmental Protection MIL-C-24308 Compatibility Reliability and Versatility GD* connectors are ideal for aerospace, military, telecommunications and other applications requiring environmental protection and high reliability. Environemental protection is accomplished by the resilient grommet, interfacial seal, and bonded connector components. Performance and Material Specifications MATERIALS AND FINISHES Materials Shell Low carbon steel per ASTM-A-620 Insulator Diallyl phthalate per MIL-M-14 type SDF-F or GDI-30F Contacts Copper alloy Finishes Yellow chromate over cadmium per QQ-P-416, Type II, Class 2 Standard finish: Gold over nickel Military Finish: Gold 50 microinches thickness per MIL-G-45204, Type II, Grade C, Class 1, over copper per MIL-C-14550 Passivated per QQ-P-35 Float Mount Hardware Stainless steel Grommets and Seals Silicone elastomer or Fluorosilicone Bonding Materials Epoxy - MECHANICAL FEATURES Wire Accommondation - Contact: #20, #22, #24 AWG. Wire O.D. .071 (1.80) maximum, .038 (0.97) minimum. Contact Retention - 9 lbs. minimum (40n) after 10 insertions. ELECTRICAL DATA Test Voltage AC RMS 60 Hz Sea Level 20,000 Ft. 50,000 Ft. 70,000 Ft. Average Flashover 1,000 1,000 500 500 Test 1,000 650 325 325 Maximum Current Carrying Capacity of Contacts - #20 Contacts: 5 Amps Temperature Range - -65C to +150C (-53.9F to +302F) How to Order GD B - 25 P ** SERIES PREFIX SHELL SIZE MOUNTING TYPE CONTACT ARRANGEMENT CONTACT TYPE MODIFICATION SERIES PREFIX GD - Grommet D SHELL SIZE E, A, B, D MOUNTING TYPE No Designator - .120 (3.05) Diameter Mounting Holes Y - Float Mount for Rear and Front Panel Mounting CONTACT ARRANGEMENT 9, 15, 25, and 50 CONTACT TYPE P - Pin, crimp termination S - Socket, crimp termination PB - Pin, Printed circuit termination with noremovable straight tails for .125 (3.18) maximum P.C. Board thickness MODIFICATIONS (Typical Modifiers) F0 - Connectors supplied Less Contacts A156 - Connectors supplied with contacts plated per MIL-G-45204 Type II Class 1 over coper per MIL-C-14550 (M24308 Finish) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 364 Grommet D GD* Test Data GD* connectors meet all applicable requirements of MIL-C-24308. The following are excerpts form ITT Cannon Test Report C82-78 applicable to environmental D subminiature GD* series connectors. Refer to MIL-C-24308 Test Extracts on page 385. Test Method Test Description Results Moisture Resistant MIL-STD-1344 Method 1002.1 Type II 1. No deterioration of performance. 2. Insulation resistance greater than 100 megohms 3. No evidence of flashover or breakdown during 1000 VAC DWV testing. Fluid Immersion 20 hours immersion in hydraulic fluid per MIL-H-5606 1. No detrimental damage. and lubricating fluid per MIL-L-23699 2. Able to meet requirements of mating and unmating forces test. Immersion Two hour Immersion tap water at a dept of 36.00 (914.40) in mated condition, per MIL-STD-810 Method 512, Procedure 1. While still immersed, the mated connectors exceeded 100 megohm insulator resistance and exhibited no evidence of breakdown or flashover during 1000 VAC (RMS) DWV testing. Design Features * Resilient silicone grommets for wire sealing * Interfacial seals * Closed-entry socket contacts * Bonded components to prevent moisture * Optional sealing plugs * Uses M39029 type contacts and termination tooling * Intermateable with most M24308 type connectors * Rear-release crimp contacts * LITTLE CAESAR(R) contact retention assembly CLOSED ENTRY SOCKET BONDING SEALING PLUG (OPTIONAL) SHELL FRONT INSULATOR CONTACT RETAINING CLIP GROMMET SHELL REAR Socket Connector INSULATOR SEALING PLUG (OPTIONAL) BONDING PIN CONTACT SHELL FRONT INTERFACIAL SEAL CONTACT RETAINING CLIP GROMMET SHELL REAR Pin Connector Printed Circuit Applications GD* pin connectors are available wit pre-loaded, non-removable contacts for P.C. board termination. Typical Part No. GDB-25PB. Environmental sealing is accomplished by application of epoxy to each contact cavity, interfacial seals, and bonded connector components. BONDING .159 (4.04) .136 (3.45) PIN CONTACT .032 (0.81) .028 (0.71) DIA. TYP. INTERFACIAL SEAL EPOXY Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 365 Grommet D GD* Standard Shell Dimensions M L B* 10TYP. G MAX. OVER GROMMET K B' D' + J H D* E + + + TWO HOLES .120 +_ .005 (3.05 +_ 0.13) DIA. X MAX. C A Front Rear Shell With Float Mount Dimensions .031 (0.79) + _ .005 (0.13) .130 (3.30) MAX. .049 (1.24) MAX. B* .031 (0.79) TOTAL DIAMETRICAL FLOAT D' B' .089 (2.26) +_ .003 (0.08) DIA. 10TYP. D* G MAX. OVER GROMMET WASHER E C RIVET A Over H Shell OVERALL FREE FLOAT .004 - .012 (0.10) - (0.30) TWO HOLES .089 (2.26) +_ .003 (0.08) Rear Y-Float Mount Front It is recommended that only one assembly, either pin or socket, be float mounted. For front panel mounting use reverse floate mount. Shell Size A +_ .015 (0.38) B' +_ .005 (0.13) B* +_ .005 (0.13) GDE-9P 1.213 (30.81) - .666 (16.91) GDE-9S 1.213 (30.81) .643 (16.33) - DGA-15P 1.541 (39.14) - GDA-15S 1.541 (39.14) .971 (24.66) GDB-25P 2.088 (53.03) - GDB-25S 2.088 (53.03) 1.511 (38.38) GDD-50P 2.635 (66.92) GDD-50S 2.635 (66.92) 2.064 (52.42) C +_ .005 (0.12) K +_ .006 (0.13) L +_ .010 (0.25) M +_ .005 (0.13) X Max. .750 (19.05) .422 (10.72) .030 (0.76) .235 (5.97) .045 (1.14) .422 (10.72) .718 (18.24) .750 (19.05) .422 (10.72) .030 (0.76) .243 (6.17) .045 (1.14) .429 (10.90) .718 (18.24) .329 (8.36) .494 (12.55) 1.093 (27.76) .422 (10.72) .030 (0.76) .235 (5.97) .045 (1.14) .422 (10.72) .718 (18.24) - .494 (12.55) 1.093 (27.76) .422 (10.72) .030 (0.76) .243 (6.17) .045 (1.14) .429 (10.90) .718 (18.24) .329 (8.36) .494 (12.55) 1.625 (41.28) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .718 (18.24) - .494 (12.55) 1.625 (41.28) .422 (10.72) .030 (0.76) .243 (6.17) .045 (1.14) .429 (10.90) .718 (18.24) .441 (11.20) .605 (15.37) 2.162 (54.91) .534 (13.56) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) .718 (18.24) - .605 (15.37) 2.162 (54.91) .534 (13.56) .030 (0.76) .243 (6.17) .045 (1.14) .429 (10.90) .718 (18.24) D' +_ .005 (0.13) E +_ .015 (0.38) - .329 (8.36) .494 (12.55) - .494 (12.55) .984 (24.99) .984 (24.99) .311 (7.90) .994 (25.24) 1.312 (33.32) - - 1.312 (33.32) .311 (7.90) 1.534 (38.96) 1.852 (47.04) - - J +_ .010 (0.25) D* +_ .005 (0.13) - 1.852 (47.04) .311 (7.90) 2.079 (52.81) 2.406 (61.11) - - 2.406 (61.11) .423 (10.74) H +_ .010 (0.25) G Max. * dimensions B, D, and H are measured as outside dimensions at the bottom of draw. NOTE: B* and D* are the outside dimensions for socket side, B' and D' are the inside dimensions for pin side. Contact Arrangements Face View Pin Insert 1 1 2 6 Shell Size Contact Arrangement Contact Size 3 7 4 8 E 9 #20 5 9 1 2 9 3 10 4 11 5 12 13 A 15 #20 6 7 14 8 15 1 2 14 15 3 4 16 5 6 17 18 7 8 19 20 B 25 #20 9 10 21 22 11 23 12 24 25 13 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 34 35 17 33 36 37 38 39 40 41 42 43 46 45 46 47 48 49 50 D 50 #20 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 366 Grommet D GD* Contacts Finish Standard Gold/Nickel A156 Gold/Copper Type ITT Cannon Part Number M39029 Part Number Pin #20 330-5291-000 Socket #20 031-1007-000 Pin #20 330-5291-037 M39029/64-369 Socket #20 031-1007-042 M39029/63-368 Accessories SEALING PLUGS: GD* grommets are designed to accept MS27488-20 sealing plugs, ITT Cannon P/N 225-0070-000 ordered separately. LOCKING HARDWARE, DUST CAPS: GD* Connectors will accommodate most standard D Subminiature accessories. Hand Crimp Tool M22520/2-01 with M22520/2-08 locator. Semiautomatic and fully automatic tooling is also available. Insertion/Extraction Tool (Plastic) Contact Size ITT Cannon Description ITT Cannon Part Number Insertion Color Tip Extraction Color Tip #20 CIET-20HDL 274-7010-000 White Green Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 367 D Subminiature Accessories ITT Cannon offers one of the broadest lines of accessories for the D Subminiature line of connectors in today's marketplace. The ITT Cannon accessory line offers unlimited design versatility. Choose from a variety of plastic, metal, EMI/RFI backshells, screwlocks, jackscrews, and spring latches. Backshell/Hardware Compatibility Chart Locking Hardware Male Screw Locks 020419/ 020420 MOUNTING METHOD METAL BACKSHELLS SHIELDED BACKSHELLS PLASTIC BACKSHELLS Front Panel Rear Panel Deep Straight Clamp Right Angle Round Clamp Straight Clamp CUPS Jackscrew D110550 Jackpost D110551 Slide Lock Post D53018 Spring Latch D110277/ D110279 Spring Latch Plate D110279/ D110280 Slide Locks DA51220-1 thru DE51224-1 Keying Plate Plated Plastic Die-Cast Zinc Straight & 90 (D*5121X) Universal D*110963 SnapTogether Universal Dataphone DB51226-1B IDC D*115386 STR/90 D*115339 POTTING Female ScrewLocks D20418 Plastic Supplied with male screw locks. Designed for use with quick-disconnect latching hardware (see page 376). Legend: = Compatible Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 368 Accessories - M85049 Backshells Deep Straight Clamp * Positive strain relief E CABLE ENTRY IN SHELL B H MAX. G F C A .015 +_ .005 (0.38 +_ .013) D MAX. CABLE ENTRY IN SHELL .136 +_ .005 DIA (3.45 +_ 0.13) TWO MTG. HOLES MIL-Spec. Non-Magnetic/No-Outgas* Material: Low Carbon Steel per ASTM A-620 Finish: Yellow Chromate Over Cadmium per M85049 Specification Material: Brass per QQ-B-613 Finish: Gold over copper per MIL-G-45204, Type II, Grade C, Class 1 or Electroless nickel per MIL-C-26074B (Superseded MIL-Spec. No.: M24308/20-1 thru-5) NM Non-Magnetic/ No-Outgas* A +_ .015 (0.38) B +_ .015 (0.38) C +_ .005 (0.13) D Max. E +_ .015 (0.38) F +_ .015 (0.38) G +_ .015 (0.38) H Max. Layout Part Number DE-9 DE24657 M85049/48-1-1 DE24657 -16 -27 1.203 (30.6) .484 (12.3) .984 (25.0) .578 (14.7) .375 (9.5) .375 (9.5) 7.50 (19.0) 1.250 (31.7) DA-15 DA24658 M85049/48-1-2 DA24658 -15 -25 1.531 (38.9) .484 (12.3) 1.312 (33.3) .578 (14.7) .713 (18.1) .312 (7.9) 7.50 (19.0) 1.250 (31.7) DB-25 DB24659 M85049/48-1-3 DB24659 -15 -25 2.078 (52.8) .484 (12.3) 1.852 (47.0) .578 (14.7) 1.000 (25.4) .312 (7.9) 1.000 (25.4) 1.563 (39.7) DC-37 DC24660 M85049/48-1-4 DC24660 -16 -25 2.718 (69.0) .484 (12.3) 2.500 (63.5) .578 (14.7) 1.375 (34.9) .312 (7.9) 1.000 (25.4) 1.563 (39.7) DD-50 DD24661 M85049/48-1-5 DD24661 -13 -23 2.625 (66.7) .593 (15.1) 2.406 (61.1) .687 (17.4) 1.406 (35.7) .406 (10.3) 1.125 (28.6) 1.688 (42.9) Plating AU NI Mil. Spec. * Meet requirements of M85049 Round Clamp * Low profile * Round cable applications .120 +_ .005 (3.05 +_ 0.13) DIA. TWO MTG. HOLES A C E B + G F + D MAX. CABLE ENTRY .015 +_ .005 (0.38 +_ .013) MIL-Spec. Non-Magnetic/No-Outgas* Material: Low Carbon Steel per ASTM A-620 Finish: Yellow Chromate Over Cadmium per M85049 Specification Material: Brass per QQ-B-613 Finish: Gold over copper per MIL-G-45204, Type II, Grade C, Class 1 or Electroless nickel per MIL-C-26074B (Superseded MIL-Spec. No.: M24308/21-1 thru-5) NM Non-Magnetic/ No-Outgas* Plating AU NI A +_ .015 (0.38) B +_ .015 (0.38) DE44994 -2 -13 1.208 (30.7) DA20961 -16 -23 1.531 (38.9) M85049/48-2-3 DB20962 -18 -27 DC20963 M85049/48-2-4 DC20963 -17 DD20964 M85049/48-2-5 DD20964 -19 Layout Part Number Mil. Spec. DE-9 DE44994 M85049/48-2-1 DA-15 DA20961 M85049/48-2-2 DB-25 DB20962 DC-37 DD-50 C +_ .005 (0.13) D Max. E +_ .015 (0.38) F +_ .015 (0.38) G +_ .030 (0.76) .500 (12.7) .984 (25.0) .406 (10.3) .661 (16.8) .125 (3.2) 1.031 (26.2) .500 (12.7) 1.312 (33.3) .406 (10.3) .984 (25.0) .125 (3.2) 1.031 (26.2) 2.078 (52.8) .500 (12.7) 1.852 (47.00) .593 (15.1) 1.515 (38.5) .187 (4.7) 1.062 (27.0) -26 2.718 (69.0) .500 (12.7) 2.500 (63.5) .718 (18.2) 2.171 (55.1) .250 (6.3) 1.062 (27.0) -31 2.625 (66.7) .609 (15.5) 2.406 (61.1) .812 (20.6) 2.093 (53.2) .312 (7.9) 1.062 (27.0) * Meet requirements of M85049 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 369 Accessories - M85049 Backshells Straight Clamp * Low profile * Discrete wire application A C B G .484 + _ .015 (12.30 + _ 0.38) .120 + _ .005 (3.05 + _ 0.13) DIA. TWO MTG. HOLES F (TYP.) E CABLE ENTRY .015 + _ .005 (0.38 + _ .013) MIL-Spec. Non-Magnetic/No-Outgas* Material: Low Carbon Steel per ASTM A-620 Finish: Yellow Chromate Over Cadmium per M85049 Specification Material: Brass per QQ-B-613 Finish: Gold over copper per MIL-G-45204, Type II, Grade C, Class 1 or Electroless nickel per MIL-C-26074B (Superseded MIL-Spec. No.: M24308/22-1 thru-4) NM Non-Magnetic/ No-Outgas* No. of Cable Locking Screws Reqd. A +_ .015 (0.38) B +_ .015 (0.38) C +_ .005 (0.13) E +_ .015 (0.38) -208 2 1.531 (38.9) .500 (12.7) 1.312 (33.3) -209 2 2.078 (52.8) .500 (12.7) 1.852 (47.0) DC19678 -138 -210 2 2.718 (69.0) .500 (12.7) DD19678 -161 -211 3 2.625 (66.7) .609 (15.5) Plating AU NI Layout Part Number Mil. Spec. DA-15 DA19678-1 M85049/48-3-2 DA19678 -167 DB-25 DB19678-2 M85049/48-3-3 DB19678 -168 DC-37 DC19678-3 M85049/48-3-4 DD-50 DD19678-4 M85049/48-3-5 F +_ .015 (0.38) G +_ .035 (0.89) .296 (7.5) .312 (7.9) .644 (16.36) .296 (7.5) .796 (20.2) .644 (16.36) 2.500 (63.5) .296 (7.5) .687 (17.4) .644 (16.36) 2.406 (61.1) .390 (9.9) .687 (17.4) .694 (17.63) Right Angle * Low profile * Spaceborne applications E CABLE ENTRY #4-40 NC-2B THD. TWO MTG. HOLES A .190 + _ .010 (2.77 + _ 0.25) B F CABLE ENTRY G H C MIL-Spec. Non-Magnetic/No-Outgas* Material: Low Carbon Steel per ASTM A-620 Finish: Yellow Chromate Over Cadmium per M85049 Specification Material: Brass per QQ-B-613 Finish: Gold over copper per MIL-G-45204, Type II, Grade C, Class 1 or Electroless nickel per MIL-C-26074B NM Non-Magnetic/ No-Outgas* M85049/50-3 DC-37 DC19977-3 DD-50 DD19977-4 .281 (7.1) .281 (7.1) 2.500 (63.5) .437 (11.1) .812 (20.6) .468 (11.9) .281 (7.1) 2.406 (61.1) .562 (14.3) .906 (23.1) .531 (13.5) .343 (8.7) 2.718 (69.0) 1.187 (30.10) -66 2.625 (66.7) 1.250 (31.7) DE19977 -44 DB19977-2 .468 (11.9) -65 M85049/50-5 DB-25 .625 (15.9) 1.852 (47.0) DE19977 -45 DE19977 -40 .437 (11.1) .968 (24.6) M85049/50-4 M85049/50-2 .281 (7.1) 2.078 (52.8) -52 DA19977-1 .468 (11.9) .437 (11.1) DE19977 -43 DE19977 -47 DA-15 .468 (11.9) .437 (11.1) 1.312 (33.3) 1.531 (38.9) M85049/50-1 .437 (11.1) .984 (25.0) .718 (18.2) 1.203 (30.6) -64 DE19977-5 .437 (11.1) .718 (18.2) -63 Mil. Spec. DE-9 H +_ .030 (0.76) E +_ .030 (0.76) B +_ .030 (0.76) Layout G +_ .030 (0.76) C +_ .005 (0.13) A +_ .015 (0.38) Plating AU NI Part Number F +_ .030 (0.76) * Meet requirements of M85049 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 370 Accessories - Shielded Metalized Plastic Backshells Snap-Together O A N N 20/80C C Nickel over Copper Temperature Range: Attenuation: T ABS Polymer Finish: CABLE GROUNDING TANG IT Material: CABLE CLAMP N * Quick and simple assembly using snap-together design feature * No complicated crimp ferrule tooling needed * Helps to comply with FCC shielding requirements 44 DB @ 1000 MHZ Design includes integral strain relieving cable clamp. Backshell requires hardware - see page 372. Straight Exit C D H E .669 (16.99) +_ .012 (3.00) B Layout Part Number A A + _ .006 (0.15) B + _ .012 (0.30) C + _ .012 (0.30) C + _ .012 (0.30) E + _ .008 (0.20) H Max. .288 (7.32) DE-9 DE121073-154 .982 (24.95) 1.213 (30.8) .933 (23.7) .630 (16.0) 1.417 (36.0) DA-15 DA121073-150 1.311 (33.30) 1.539 (39.1) 1.252 (31.8) .630 (16.0) 1.654 (42.0) .327 (8.31) DB-25 DB121073-151 1.850 (47.00) 2.087 (53.0) 1.772 (45.0) .630 (16.0) 1.654 (42.0) .414 (10.52) DC-37 DC121073-152 2.498 (63.45) 2.728 (69.3) 2.374 (60.3) .630 (16.0) 1.654 (42.0) .485 (12.32) 40 Exit C 50 D E .669 (16.99) +_ .012 (3.00) B Layout Part Number Cable Diameter B + _ .012 (0.30) C + _ .012 (0.30) D + _ .012 (0.30) E + _ .008 (0.20) Min. Max. .295 (7.5) DE-9 DE121073-54 1.417 (36.0) .866 (22.0) .630 (16.0) 1.417 (36.0) .138 (3.5) DA-15 DA121073-50 1.744 (44.3) 1.075 (27.3) .630 (16.0) 1.654 (42.0) .256 (6.5) .354 (9.0) DB-25 DB121073-51 2.283 (58.0) 1.614 (41.0) .630 (16.0) 1.654 (42.0) .256 (6.5) .433 (11.0) DC-37 DC121073-52 2.933 (74.5) 2.264 (57.5) .630 (16.0) 1.654 (42.0) .256 (6.5) .433 (11.0) DD-50 DD121073-53 2.873 (73.0) 2.165 (55.0) .748 (19.0) 1.654 (42.0) .354 (9.0) .512 (13.0) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 371 Accessories - Shielded Backshells #4-40 Locking Hardware For Snap-Together Shielded Backshells Extended Jackscrew Recessed Jackscrew .531 (13.5) .354 (9.00) .177 (4.50) DIA. Thumbscrew .748 (19.00) .169 (4.30) #4-40 Threads .236 (6.00) MIN. .354 (9.00) 1.969 (50.00) .169 (4.30) #4-40 Threads .354 (9.00) .236 (6.00) #4-40 THREADS .236 (6.00) MIN. .161 (4.10) DIA. Part Number: 250-8501-004 Part Number: 250-8501-010 Part Number: 250-8501-013 Material: Brass Material: Brass Material: Brass Finish: Nickel Finish: Nickel Finish: Nickel 2 Quantity Required per Backshell: 2 Quantity Required per Backshell: 2 Quantity Required per Backshell: Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 372 Accessories - Shielded Backshells Metal Blackshell Straight Cable Exit 9 and 15 Position 25 Position 37 and 50 Position C B B B A A A D Size E Dia. E Dia. F F F MATERIAL SPECIFICATIONS D D E Dia. * EMI/RFI protection * Intergral grommet to protect against C Part Number A + _ .005 (0.13) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .005 (0.13) F + _ .005 (0.13) Cover; Die Cast Zinc 9 980-2000-345 1.225 (31.12) 1.465 (37.21) .620 (15.75) .620 (15.75) .400 (10.16) .984 (24.99) Finish: Clear Zinc Plate 15 980-2000-346 1.540 (39.12) 1.600 (40.64) .620 (15.75) .620 (15.75) .400 (10.16) 1.312 (33.32) Inserts: PVC 25 980-2000-347 2.090 (53.09) 1.550 (39.37) .690 (17.53) .620 (15.75) .525 (13.34) 1.857 (47.17) Hardware: Steel 37 980-2000-348 2.730 (69.34) 1.800 (45.72) .864 (21.95) .620 (15.75) .726 (18.44) 2.500 (63.50) Finish: Clear Zinc 50 980-2000-349 2.626 (66.70) 1.800 (45.72) .864 (21.95) .730 (18.54) .726 (18.44) 2.406 (61.11) Metalized-Plastic Backshell Straight Cable Exit C E Dia. B F A MATERIAL SPECIFICATIONS Size D Part Number A + _ .005 (0.13) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .005 (0.13) F + _ .005 (0.13) Cover; ABS Polymer 9 980-2000-350 1.217 (30.91) 1.547 (39.29) .640 (16.26) .640 (16.26) .400 (10.16) .984 (24.99) Finish: Nickel over Copper 15 980-2000-351 1.545 (39.29) 1.505 (38.23) .640 (16.26) .640 (16.26) .400 (10.16) 1.312 (33.32) Inserts: PVC 25 980-2000-352 2.090 (53.09) 1.655 (42.04) .710 (18.03) .640 (16.26) .522 (13.26) 1.857 (47.17) Hardware: Steel 37 980-2000-353 2.734 (69.44) 1.830 (46.48) .906 (23.01) .640 (16.26) .726 (18.44) 2.500 (63.50) Finish: Clear Zinc 50 980-2000-354 2.645 (67.18) 1.855 (47.12) .940 (23.88) .770 (19.56) .726 (18.44) 2.406 (61.11) Highlight part numbers indicate standard product; usally available with shorter lead times. Compression Inserts (Included With Backshell) 9 and 15 Position Accommodates a wide range of cable diameters9 position - .190/.350 25 Position 37 and 50 position 1 15 position - .190/.350 1 25 position - .190/.460 3 37 position - .300/.680 5 6 2 4 3 2 5 3 2 50 position - .300/.680 1 4 4 5 #1 Positions 9, 15 25 37, 50 O.D. #2 I.D. #4 #5 I.D. O.D. 0.360 (9.14) 0.255 (6.48) 0.360 (9.14) 0.600 (15.24) 0.450 (11.43) 0.450 (11.43) 0.410 (10.41) 0.450 (11.43) 0.370 (9.40) 0.450 (11.43) 0.300 (7.62) 0.450 (11.43) 0.655 (16.64) 0.570 (14.48) 0.700 (17.78) 0.620 (15.75) 0.810 (20.57) 0.650 (16.51) 0.655 (16.64) 0.500 (12.70) 0.655 (16.64) 0.320 (8.13) O.D. #3 O.D. 0.475 )12.07) I.D. 0.360 (9.14) 0.315 (8.000) I.D. 0.285 (7.24) #6 O.D. I.D. O.D. I.D. 0.360 (9.14) 0.210 (5.33) N/A N/A 0.230 (5.84) N/A 0.425 (10.80) 0.655 (16.64) N/A 0.350 (8.89) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 373 Accessories - Plactic Backshells Universal * Economical design uses an adjustable tie-wrap for cable strain relief * Compatible with male screw locks and spring latches * U.L. rated 94V-2 (flame retardant) 248-2670-001 Listing A D E Straight B C D Mateial: Junction shell-polypropylene; Hardware-steel; Tie-wrap-nylon. Finish: Hardware-cadmium plate, yellow chromate. Color: Black (junction shell). A + _ .015 (0.38) B + _ .015 (0.38) C + _ .015 (0.13) C + _ .015 (0.38) DE110963-1 .765 (19.43) 1.400 (35.56) .600 (15.24) .250 (6.35) .125 (3.18) DA110963-2 1.097 (27.86) 1.569 (39.85) .600 (15.24) .375 (9.53) .161 (4.09) DB-25 DB110963-3 1.641 (41.68) 1.651 (41.94) .600 (15.24) .410 (10.41) .205 (5.21) DC-37 DC110963-4 2.279 (57.89) 1.899 (48.23) .600 (15.24) .593 (15.06) .205 (5.21) DD-50 DD110963-5 2.063 (52.40) 1.925 (48.90) .710 (18.03) .670 (17.01) .285 (7.24) Layout Part Number DE-9 DA-15 E + _ .010 (0.25) Snap-Together Universal * A 2-piece snap-together design for quick assembly * Customer furnishes tie-wrap A B DIA. MAX. CABLE ENTRY E MAX. C D Material: Flame-retardant thermoplastic, UL 94V-0 rated. B Max. C + _ .008 (0.20) D + _ .008 (0.20) E Max. Layout Part Number A + _ .008 (0.20) DE-9 DE115339-20 1.673 (42.5) .276 (7.0) .669 (17.0) .768 (19.5) 1.555 (39.5) DA-15 DA115339-21 1.673 (42.5) .378 (9.6) .669 (17.0) 1.094 (27.8) 1.555 (39.5) DB-25 DB115339-22 1.673 (42.5) .457 (11.6) .669 (17.0) 1.638 (41.6) 1.555 (39.5) DC-37 DC115339-23 1.673 (42.5) .512 (13.0) .669 (17.0) 2.283 (58.0) 1.555 (39.5) DD-50 DD115339-24 1.673 (42.5) .630 (16.0) .780 (19.8) 2.060 (52.3) 1.555 (39.5) One-Piece Snap Together * Low cost * Easy to assemble * Aesthetically pleasing * Includes: thumbscrews, cable clamps A C + + B E CLAMP, THERMOPLASTIC CLAMP, METAL 1.890 (48.00) ITT CANNON D Material: Specification: Plastic - polypropylene; Hardware - steel. Finish: Yellow chromate over zinc. D Dia. Max. E .984 (24.99) .224 (5.69) 1.083 (27.51) .638 (16.21) 1.312 (33.32) .224 (5.69) 1.228 (31.19) .638 (16.21) 1.852 (47.04) .256 (6.50) 1.508 (38.30) Layout Part Number A B DE-9 DEBS-9 1.386 (35.20) .638 (16.21) DA-15 DABS-15 1.705 (43.31) DB-25 DBBS-25 2.252 (57.20) C Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 374 Accessories - Plactic Backshells One Piece Plastic * Straight or 90 cable exit * Integral cable clamp and set screw * Accommodates spring latches * UL 94V-2 rated flame retardant * Mounting hardware included B E A C Straight Cable Exit D TWO SCREWS 4-24 X 5/16 long SELF-TAPPING Material: Thermoplastic UL 94V-2 rated Color: Black Screws: Steel, cadmium plated Layout Part Number A + _ .015 (0.38) B + _ .015 (0.38) C + _ .015 (0.13) C + _ .015 (0.38) E + _ .010 (0.25) .281 (7.1) DE-9 DE51218 1.218 (30.9) 1.000 (25.4) .984 (25.0) .500 (12.7) DA-15 DA51210 1.546 (39.3) 1.000 (25.4) 1.312 (33.3) .500 (12.7) .360 (9.1) DB-25 DB51212 2.093 (53.2) 1.250 (31.7) 1.852 (47.0) .500 (12.7) .493 (12.5) DC-37 DC51214 2.734 (69.4) 1.500 (38.1) 2.500 (63.5) .500 (12.7) .967 (17.6) DD-50 DD51216 2.640 (67.1) 1.500 (38.1) 2.406 (61.1) .609 (15.5) .734 (18.6) * 90 Cable Exit * Intergral cable clamps & set screw * UL 94V-2 rated flame retardand * Mounting Hardware included D A J B C Material: Thermoplastic UL 94V-2 rated Color: Black Screws: Steel, cadmium plated Layout Part Number A + _ .015 (0.38) B + _ .015 (0.38) C + _ .015 (0.13) C + _ .015 (0.38) E + _ .010 (0.25) DA-15 DA51211 1.822 (46.3) 1.000 (25.4) 1.312 (33.3) .500 (12.7) .360 (9.1) DB-25 DB51213 2.386 (60.1) 1.250 (31.7) 1.852 (47.0) .500 (12.7) .493 (12.5) DC-37 DC51215 3.009 (76.4) 1.500 (38.1) 2.500 (63.5) .500 (12.7) .694 (17.6) DD-50 DD51217 2.915 (74.0) 1.500 (38.1) 2.406 (61.1) .609 (15.5) .734 (18.6) Dataphone * Available in 25 position only * Supplied with screws 2.218 (56.34) .796 (20.22) 1.800 (45.72) .765 (19.43) 2.187 (55.55) 1.780 (45.21) 1.421 (36.09) 1.390 (35.31) .440 (11.18) .410 (10.41) #4-40 Threads .150 (3.81) .140 (3.56) 1.852 (47.04) Max. Cable Entry .312 (7.92) Material: Junction shell - Thermoplastic UL 94V-0 rated. Hardware - steel. Finish: Hardware - cadmium plate, clear chromate. Color: Black Part Number: DB51226-1B Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 375 Accessories - Plactic Backshells Quick-Disconnect Backshells for IDC Cable IDC E Order locking hardware separately. * Optional Spring Clips provide quick disconnect for either flat IDC cable or round jacketed cable * Designed for use with keying plates sold separately CABLE ENTRY .078 +_ .014 (2.00 +_ 0.35) B C A D Material: Thermoplastic, UL 94V-0 rated Color; Black Layout Part Number A Max. B Max. C + _ .005 (.013) D Max. E + _ .008 (0.2) DE-9 DE115386-1B 1.623 (41.2) DA-15 DA115386-2B 1.950 (49.5) 1.596 (40.5) .984 (25.0) .642 (16.3) .590 (15.0) 1.596 (40.5) 1.311 (33.3) .642 (16.3) DB-25 DB115386-3B .917 (23.3) 2.490 (63.2) 1.596 (40.5) 1.852 (47.0) .642 (16.3) 1.456 (37.0) DC-37 DC115386-4B 3.140 (79.7) 1.596 (40.5) 2.500 (63.5) .642 (16.3) 2.106 (53.5) Quick-Disconnect Backshells for Round Cable Round Cable - Straight and 90 Exit .465 +_ .012 (11.80) +_ (0.30) Order locking hardware separately. E SPRING F B C A D HOOK Material: Thermoplastic, UL 94V-0 rated Color; Black Part Number A Max. B Max. DE-9 DE115339 1.623 (41.2) DA-15 DA115339-1 1.950 (49.5) DB-25 DB115339-2 DC-37 DD-50 Layout C + _ .005 (.013) D Max. E + _ .008 (0.2) F Min. 1.596 (40.5) .984 (25.0) .642 (16.3) .590 (15.0) 1.596 (40.5) 1.311 (33.3) .642 (16.3) .917 (23.3) .264 (6.7) 2.490 (63.2) 1.596 (40.5) 1.852 (47.0) .642 (16.3) 1.456 (37.0) .697 (17.7) DC115339-3 3.140 (79.7) 1.596 (40.5) 2.500 (63.5) .642 (16.3) 2.106 (53.5) .697 (17.7) DD115339-4 3.023 (76.8) 1.653 (42.0) 2.405 (61.1) .748 (19.0) .433 (11.0) .697 (17.7) .264 (6.7) Optional Locking Mechanism/Hardware Material: Corrosion-resistant steel. NOTE: When used with keying plate, order lock hook part number 015-8755-001. Lock Hook Part No. 015-8755-000 Order 2 per connector Note: Not for use on rear panel mounted connectors. Lock Spring Part No. 259-8760-000 Order 2 per connector Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 376 Accessories - Locking Hardware Screw Locks Insures positive mating. Used for vibration applications. Front Panel Mount Rear Panel Mount SCREW CLIP WITH THREAD D SUBMINIATURE CONNECTOR, PIN OR SOCKET NUT WASHER MOUNTING PANEL LOCK WASHER HEX NUT Female Srew Locks .250 (6.35) APPROX. REMOVE ONE WASHER FOR EACH .030 (0.76) OF PANEL THICKNESS WHEN REAR MOUNTING .060 (12) MAX. PANEL #4-40 NC-2B THD. .188 +_ .015 (4.78 +_ 0.38) .188 +_ .015 (4.78 +_ 0.38) REAR FLANGE (REF.) A Order 2 per connector. Cadmium With Yellow Chromate D20418-2 #4-40 NC-2A THD M24308 MIL-Spec. A +_ .015 (0.38) M24308/26-1 .500 (12.70) D20418-50 D20418-39 Material: Cold rolled steel. Finish: Cadmium plate, yellow chromate NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock .312 (7.92) assemblies. .625 (15.88) M24308/26-2 (2) A third flat washer is supplied for front panel mounting of tab shell connectors. .750 (19.05) D20418-74 NM - Non-Magnetic Finish and Material: NM For Use With Non-Magnetic/No-Dutgas Products NM Passivated (Stainless Steel). Gold over copper per MIL-G-45204, Type II, Class 2 (Brass) NM Brass Stainless Steel A D20418-52 D20418-14 .312 (7.92) N/A D20418-102 .500 (12.70) D20418-101 D20418 -77 .625 (15.88) +_ .015 (0.38) Male Srew Locks A B C #4-40 NC-2A THD. Standard Material: Clip-sheet steel; hardware-cold rolled steel. Standard Finis: Cadmium plate, yellow chromate. Commercial: 100 microinch zinc minimum. Passivated (Stainless Steel). Gold over copper per MIL-G45204, Type II, Class 2 (Brass). Order 2 per connector. Cadmium With Yellow Chromate NM Brass NM Stainless Steel A B C +_ .015 (0.38) +_ .010 (0.25) +_ .005 (0.13) Connector Size D20419 D20419-74 N/A .555 (14.10) .250 (6.35) .048 (1.22) DE9, DA15, DB25, DC37 D20419-18 D20419-103 D20419-38 .555 (14.10) .281 (7.14) .067 (1.70) DE9, DA15, DB25, DC37 D20419-21 N/A D20419-80 .555 (14.10) .281 (7.14) .092 (2.34) DE9, DA15, DB25, DC37 D20419-104 N/A N/A .555 (14.10) .312 (7.92) .092 (2.34) DE9, DA15, DB25, DC37 D20420 D20419-67 N/A .656 (16.66) .250 (6.35) .048 (1.22) DD50 D20420-13 D20419-74 D20419-108 .656 (16.66) .281 (7.14) .067 (1.70) DD50 D20420-15 N/A D20419-70 .656 (16.66) .281 (7.14) .092 (2.34) DD50 D20420-86 N/A N/A .656 (16.66) .312 (7.92) .092 (2.34) DD50 NM - Non-Magnetic Finish & Material: Passivated (Stainless Steel). Gold over copper per MIL-G-4520, Type II, Class 2 (Brass). NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors. Highlighted part numbers indicate standard product; usually available with shorter lead times. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 377 Accessories - Locking Hardware Slide Latch Assemblies #4-40 HEX. NUT LOCK WASHER SLIDE LATCH FLAT WASHERS #4-40 SCREW #4-40 POST LOCK WASHER HEX NUT Slide Lock Post Kit SPACER WASHER LOCK WASHER #4-40 HEX NUT Kit consists of 1 post, 2 spacer washers, 1 lock washer and hex nut. .180 (4.60) HEX Order 2 per connector. Cadmium With Yellow Chromate Material Steel D53018 Brass D53018-5 .102 (2.59) +_ .005 (.130) .416 (10.57) +_ .010 (.250) NOTE: When rear-mounting connector to a 1/16" panel, delete the 2 spacer washer. Slide Latch Kit 2 SCREWS #4-40 NC-2A THREAD .112 (2.84) * Ideal for Ethernet Applications .144 +_ .015 (3.66 +_ 0.38) RETAINER SLIDING LOCK .093 (2.36) TRAVEL REF. A C B Kit consists of slide latch retainer, 2 screws, 2 nuts, 2 lock washer. Order one per connector. Description Material Retainer Sliding lock Stainless Steel per QQ-S-766 Passivated per QQ-P-35 Steel Yellow chromate over 100 microinch cadmium per QQ-P-416. Screw, Mtg, Washer, Lock Nut, Hex Cadmium With Yellow Chromate A + _ .015 (0.38) B + _ .015 (0.38) C + _ .005 (0.13) DE-9 DE51224-1 1.380 (35.05) .500 (12.70) .984 (25.00) DA-15 DA51220-1 1.720 (43.69) .500 (12.70) 1.312 (33.32) DB-25 DB51221-1 2.260 (57.40) .500 (12.70) 1.852 (47.04) DC-37 DC51222-1 2.908 (73.86) .500 (12.70) 2.500 (63.50) DD-50 DD51223-1 2.814 (71.47) .609 (15.47) 2.406 (61.11) Layout Finish Highlighted part numbers indicated standard product; usually available with shorter lead times. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 378 Accessories - Locking Hardware Spring Latch Assemblies Low cost Minimizes field connection time Positive lock between connectors Locked Unlocked Spring Latch Plate .605 + _ .025 (15.37 + _ 0.64) Kit consists of 1 plate, 1 screw, 1 lock washer, 1 nut. Order two per connector. #4-40 THD. x .312 (7.92) LONG SCREW .095 (2.41) .060 (1.52) A #4-40 SCREW B #4-40 HEX. NUT Material: Stainless Steel Finish: Passivated LATCH PLATE Layout CONNECTOR EITHER PIN OR SOCKET Part Number A +_ .015 (0.38) B +_ .015 (0.38) DE-9 thru DC-37 D110278 .484 (12.29) .556 (14.12) DD-50 Only D110280 .609 (15.49) .673 (17.09) LOCK WASHER #4-40 HEX NUT Spring Latch .613 +_ .025 Kit consists of 1 spring, 1 screw, 1 bracket, 1 lock washer, and 1 hex nut. Order two per connector. #4-40 THD. x .312 (7.92) LONG SCREW (15.57 + _ 0.64) B A C *.095 (2.41) .060 (1.52) #4-40 HEX. NUT * Does not apply to rear panel mounting. Material: Stainless Steel Finish: Passivated Layout DE-9 thru DC-37 #4-40 SCREW DD-50 Mounting Part Number A +_ .015 (0.38) B +_ .015 (0.38) C +_ .020 (0.51) Front Panel DD10277 .489 (12.42) .565 (14.35) .732 (18.59) Rear Panel D110277-4 .489 (12.42) .605 (15.37) .615 (15.62) Front Panel D110279 .609 (15.49) .673 (17.09) .732 (18.59) SPRING LATCH SPRING LATCH MOUNTING BRACKET CONNECTOR EITHER PIN OR SOCKET LOCK WASHER #4-40 HEX. NUT Highlighted par numbers indicate standard product; usually available with shorter lead times. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 379 Accessories - Locking Hardware Jackscrew/Jackpost Assemblies Jackpost - P/N D110551 FEMALE POST Kit consists or 2 posts, 2 nuts, 2 lockwashers. .187 (4.75) HEX (ACROSS FLATS) CONNECTOR ASSY Order one per connector. #4-40 UNC-2B THD. #4-40 UNC THREAD #4-40 UNC-2B THD. .230 (5.84) +_ .005 (.130) .120 (3.05) DIA. 555 (14.10) +_ .005 (.130) .045 (1.14) +_ .005 (.130) #4 LOCK WASHER PANEL .125 (3.18) MAX. .220 (5.59) MIN. PERFECT THD. #4 HEX NUT LOCK WASHER HEX NUT #4-40 UNC THREAD Material: Stainless Steel per QQ-S-763 Finish: Passivated per QQ-P-35 JACKPOSTS ASSEMBLY Note: Jackpost is not compatible with rear-panel mounted connectors. Jackscrew - P/N D110550 .035 (0.89) +_ .005 (.130) HEAD. JACKSCREW Kit consists of 2 studs, 2 heads, and 1 tube retaining compound. REATAINING COMPOUND .220 (5.59) DIA. MAX. Order one per connector. .370 (9.40) MAX. .068 (1.73) MAX. .640 (16.26) MAX. .120 (3.05) DIA. #2-56 UNC THD. .180 (4.57) MAX. .025 (0.64) + _ .005 (0.13) STUD. JACKSCREW #4-40 UNC THD. #4-40 UNC THREAD .220 (5.59) DIA. MAX. JACKSCREW ASSEMBLY Material: Stainless Steel per QQ-S-763 Retaining Compound: per MIL-S-46163 Finish: None Jackscrew/Jackpost Assemblies Nylon potting shells are molded with a thin flange .030 (0.76) to permit the use of D subminiature locking devices. Holds epoxy in place during curing. .600 (15.20) + + .185 (.470) .030 (0.76) .128 (3.25) DIA. Material: Nylon Color: Natural (white) Layout Part Number DE-9 DE50904-1 DA-15 DA50905-1 DB-25 DB50906-1 DC-37 DC50907-1 DD-50 DD50908-1 Highlighted part numbers indicated standard product; usually available with shorter lead times. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 380 Accessories Guide Pin Plates Female .378 (9.60) MAX Blind Mate Applications A MOUNTING PANEL B E + F + + + G F + Materials Plate: Cold rolled steel per ASTM A-620, yellow chromate over cadmium plate per QQ-P-416 Type II, Class 2 Screw: Steel, yellow chromate over 100 microinches cadmium minimum per QQ-P-416. .250 (6.35) MAX. SOLDER POT EXTENSION .062 (1.57) C .063 +_ .016 (1.60 +_ 0.41) RAD. 4 PLACES D .159 (4.04) DIA. MIN. 2 PLACES MOUNTING HOLE NO. 4.40 UNC-2B THREAD (SCREW SUPPORT) 2 PLACES Recommended Panel Cutout .166 +_ .002 (4.22 +_ 0.05) B DIA. 2 PLACES E K RADIUS .144 +_ .005 (3.66 +_ 0.13) DIA. 2 PLACES + F + + + F + J D H Layout Part Number A + _ .016 (0.41) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .005 (0.13) F + _ .005 (0.13) G + _ .016 (0.41) H + _ .016 (0.41) J + _ .016 (0.41) K + _ .016 (0.41) DA-15 DA22214 2.282 (57.96) 1.906 (48.41) 1.312 (33.32) .898 (22.81) .765 (19.43) .375 (9.52) 1.000 (25.40) 1.532 (38.91) .484 (12.29) .242 (6.15) DB-25 DB22254 2.820 (71.63) 2.446 (62.13) 1.852 (47.04) 1.168 (29.67) 1.035 (26.29) .375 (9.52) 1.000 (25.40) 2.016 (51.21) .469 (11.91) .234 (5.94) DC-37 DC22071 3.469 (88.11) 3.094 (78.59) 2.500 (63.50) 1.492 (37.90) 1.359 (34.52) .375 (9.52) 1.000 (25.40) 2.657 (67.49) .469 (11.91) .234 (5.94) DD-50 DD21961 3.375 (85.72) 3.000 (76.20) 2.406 (61.11) 1.437 (36.50) 1.312 (33.32) .437 (11.10) 1.125 (28.58) 2.563 (65.10) .563 (14.30) .282 (7.16) D .144 +_ .005 (3.66 +_ 0.13) 2 PLACES Consult factory for DC size. Male 2 CONNECTOR MOUNTING HOLES NO. 4-40 UNC-2B THREAD Blind Mate Applications A .188 +_ .012 (4.78 +_ 0.30) .250 (6.35) MAX SOLDER POT EXTENSION B C .062 (1.57) MAX. ITT CANNON .158 (4.01) DIA. MAX. Materials Guide Pin: 303 stainless stell per MIL-S-7720 Cond. A, passivated per QQ-P-35 Screws, Rivits, Washers: Steel, Yellow chromate over 100 microinches cadmium minimum per QQ-P-416 .875 +_ .030 Plate: Cold rolled steel per ASTM A-620, yellow chromate over (22.22 +_ 0.76) cadmium plate per QQ-P-416, Type II, Class 2 .160 (4.06) REF DIA MAX. F E .062 +_ .005 (1.57 +_ 0.13) CL .343 +_ .015 (8.71 +_ 0.38) G Recommended Panel Cutout B .160 +_ .010 (4.06 +_ 0.25) C K RADIUS D + F H + + + + .144 +_ .005 DIA. (3.66 +_ 0.13) 2 PLACES + .218 +_ .005 DIA. (3.66 +_ 0.13) 2 PLACES CL J Layout Part Number A + _ .015 (0.38) B + _ .005 (0.13) C + _ .010 (0.23) D + _ .005 (0.13) E + _ .015 (0.38) F + _ .010 (0.23) G + _ .005 (0.13) H + _ .010 (0.25) J + _ .015 (0.38) K + _ .005 (0.13) DA-15 DA22213 2.281 (57.94) 1.906 (48.41) 1.663 (42.24) .898 (22.81) 1.000 (25.40) .750 (19.05) 1.312 (33.32) .484 (12.29) 1.531 (38.89) .242 (6.15) DB-25 DB22255 2.820 (71.63) 2.446 (62.13) 2.203 (55.96) 1.168 (29.67) 1.000 (25.40) .750 (19.05) 1.852 (47.04) .484 (12.29) 2.047 (51.99) .242 (6.15) DC-37 DC22070 3.468 (88.09) 3.094 (78.42) 2.851 (72.42) 1.492 (37.90) 1.000 (25.40) .750 (19.05) 2.500 (63.50) .484 (12.29) 2.687 (68.25) .242 (6.15) DD-50 DD21962 3.375 (85.72) 2.300 (58.42) 2.749 (69.82) 1.437 (36.50) 1.125 (28.58) .874 (22.20) 2.406 (61.11) .593 (15.06) 2.635 (66.93) .296 (7.52) Consult factory for DC size. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 381 Accessories Combo D Guide Pin and Socket Installs into any Combo D, size 8 Cavity. This patented guide pin and socke system is ideal for blind mate applications where space is limited. Material Finish Brass Gold over nickel Copper Alloy Gold over nickel Description Guide Pin Guide Socket 1.150 (29.21) REF. .145 (3.68) .135 (3.43) .223 (5.66) .213 (5.41) .115 (2.92) REF. .197 (5.01) MIN .223 (5.55) .213 (5.53) RING, RETAINING RING, RETAINING .128 (3.28) .122 (3.10) SHELL, RECEPTACLE 2X WASHER, STABILIZING Press Fit Guide Socket P/N DM53744-72 .197 (5.00) MIN. .153 (3.89) .149 (3.78) PCB Guide Pin P/N DM53745-82 Dust Caps Anti-static conductive dust caps (black polypro- RAISED GATE MARK pylene) protect connectors and contacts from R. TYP. dust and moisture. .25 (6.35) ITT CANNON XX-XX-XX B W B A .04 WALL TYP. (1.02) L NOTE: L dim. applies at point of maximum internal interface length. Part Numbers I.D. A B L DE-59-20 Pin .80 (20.32) .45 (11.43) .644 (16.36) .299 (7.59) W DA-59-20 Pin 1.12 (28.45) .46 (11.68) .968 (24.59) .300 (7.62) DB-59-20 Pin 1.67 (42.42) .46 (11.68) 1.506 (38.25) .295 (7.49) DC-59-20 Pin 2.32 (58.93) .46 (11.68) 2.158 (54.81) .290 (7.37) DD-59-20 Pin 2.24 (56.90) .57 (14.48) 2.091 (53.11) .410 (10.41) DE-60-20 Socket .86 (21.84) .51 (12.95) .700 (17.78) .351 (8.92) DA-60-20 Socket 1.20 (30.48) .51 (12.95) 1.044 (26.52) .355 (9.02) DB-60-20 Socket 1.74 (44.20) .53 (13.46) 1.559 (39.60) .358 (9.09) DC-60-20 Socket 2.39 (60.71) .53 (13.46) 2.240 (56.90) .369 (9.37) DD-60-20 Socket 2.29 (58.17) .63 (16.00) 2.137 (54.28) .474 (12.04) Interfacial Seal Layout 10 TYP. A B .036 +_ .007 (0.91 +_ 0.18) DIA. TYP. .031 + .015 - .000 (0.79 + 0.38 - 0.00) Part Number A B .656 (16.7) .331 (8.4) DA53750-1 .984 (25.0) .331 (8.4) DB53750-2 1.531 (38.9) .331 (8.4) DC-37 DC53750-3 2.171 (55.1) .331 (8.4) DD-50 DD53750-4 2.078 (52.8) .437 (11.1) DE-9 DE53750 DA-15 DB-25 Material: Silastic sheet Provides moisture resistance at the mating interface. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 382 Accessories - Gender Changers & Connector Savers Performance and Material Specifications MATERIALS AND FINISHES MECHANICAL FEATURES Material Finish Contacts Copper Alloy Gold Over Nickel Rivets Copper Alloy Tin/Lead Coupling - Friction and lock accessories Polarization - Keystone-shaped shells PERFORMANCE SPECIFICATIONS Steel Tin/Lead M/M Glass Epoxy - Temperature Rating: - 55 to +105C F/F Thermo Plastic - Current Rating: 3 Amp continuous Zinc Alloy - Dielectric Withstanding Voltage: 500 VAC at Sea Level Locking Nut Steel Clear Chromate Over Cadmium Washers Steel Clear Chromate Over Cadmium Washer, Captive Mylar None Shells Insulator (Gender Changer): Spacer Dimensions/Part Numbers Gender Changer Male/Male .571 +_ 0.16 (14.50 + _ 0.41) A .231 +_ .010 (5.87 + _ 0.25) B .135 +_ .005 DIA. (3.43 +_ 0.13) 2 PLACES C .231 + _ .010 (5.87 +_ 0.25) .329 + _ .010 (8.36 +_ 0.25) .484 +_ .015 (12.55 + _ 0.38) Contact Pin Front Shell NOTE PIN 1 Front PIN 1 Side Rear Side Front Shell 10 +_ 1 2 PLACES Rivet Insulator - PC Board Pin Gender Changer Female/Female A .516 +_ .016 (13.11 + _ 0.41) .243 +_ .010 (6.17 + _ 0.25) B .243 +_ .010 (6.17 + _ 0.25) FRONT SHELL D .311 +_ 005 (7.90 +_ 0.13) INSULATOR SOCKET CONTACT .494 +_ .015 (12.55 + _ 0.38) INSULATOR .120 + _ .005 (3.05 +_ 0.13) 2 PLACES 10 +_ 1 2 PLACES Connector Saver .030 + _ .010 (0.76 +_ 0.26) FRONT SHELL Socket Engaging View, Pin Side A B C .235 +_ .010 (5.97 + _ 0.25) .864 +_ .020 (21.95 + _ 0.51) .243 + _ .010 (6.17 +_ 0.25) INSULATOR ASSY. SOCKET 2X 11 9 CONTACT SHELL PIN FRONT SHELL SOCKET FRONT SPACER Gender Changer Part Numbers Female/Female Male/Male Number of Contacts (Shell Size) Without Hardware With Hardware Assembled Without Hardware With Hardware Assembled Connectors Saver Part Numbers Male/Female A +_ .015 (0.4) B +_ .010 (0.25) C +_ .010 (0.25) D +_ .005 (0.13) .643 (16.33) 9 (E) DE111805-1 DE11805-5 DE111813 DE111813-3 DEBU111515 1.213 (30.81) .984 (24.99) .666 (16.92) 15 (A) DE111806-1 DA11806-5 DA111810 DA111810-3 DABU111512 1.541 (39.14) 1.312 (33.32) .994 (25.25) .971 (24.66) 25 (B) DE111807-1 DB11807-5 DB111811 DB111811-2 DBBU111511 2.088 (53.04) 1.852 (47.04) 1.534 (38.96) 1.511 (38.38) 37 (C) DE111808-1 DC11808-5 Not Available Not Available Not Available 2.729 (69.32) 2.500 (63.50) 2.182 (55.42) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 383 D Subminiature Panel Cutouts PANEL PANEL Standard Cutout .032 (0.81) RADIUS MAX.TYP. A 10 +_ 2 B G H F J RADIUS 4 PLACES Front mounting of standard shell Rear mounting of standard shell E D FULL RADIUS C PANEL PANEL Optional Cutout (For Rear Mounting) Rear mounting of float mount shell (Y-Code) Connector Size A Standard A Float B Standard B Float C Standard C Float D Standard D Float E Standard E Float Front mounting of reverse mount shell (Y-Code) G D C Mounting Method A + _ .005 (0.13) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .005 (0.13) F + _ .005 (0.13) G + _ .002 (0.05) H + _ .002 (0.05) J + _ .002 (0.05) Front Mounting 1.202 (30.53) .601 (15.26) 1.312 (33.32) .656 (16.66) .513 (13.03) Rear Mounting 1.134 (28.80) .567 (14.40) 1.312 (33.32) .656 (16.66) .449 (11.40) .257 (6.52) .120 (3.04) .060 (1.52) .083 (2.10) .225 (5.71) .120 (3.04) .060 (1.52) Front Mounting 1.234 (31.34) .617 (15.67) 1.312 (33.32) .656 (16.66) .132 (3.35) .545 (13.84) .273 (6.93) .088 (2.23) .044 (1.11) Rear Mounting 1.166 (29.61) .583 (14.80) 1.312 (33.32) .083 (2.10) .656 (16.66) .481 (12.21) .241 (6.12) .088 (2.23) .044 (1.11) Front Mounting 1.743 (44.27) .872 (22.14) .132 (3.35) 1.852 (47.04) .926 (23.52) .513 (13.03) .257 (6.52) .120 (3.04) .060 (1.52) Rear Mounting 1.674 (42.51) .083 (2.10) .837 (21.25) 1.852 (47.04) .926 (23.52) .449 (11.40) .225 (5.71) .120 (3.04) .060 (1.52) Front Mounting .132 (3.35) 1.775 (45.08) .888 (22.55) 1.852 (47.04) .926 (23.52) .545 (13.84) .273 (6.93) .088 (2.23) .044 (1.11) .083 (2.10) Rear Mounting 1.706 (43.33) .853 (21.66) 1.852 (47.04) .926 (23.52) .481 (21.21) .241 (6.12) .088 (2.23) .044 (1.11) .132 (3.35) Front Mounting 2.391 (60.73) 1.196 (30.37) 2.500 (63.50) 1.250 (31.75) .513 (13.03) .257 (6.52) .120 (3.04) .060 (1.52) .083 (2.10) Rear Mounting 2.326 (59.08) 1.163 (29.54) 2.500 (63.50) 1.250 (31.75) .449 (11.40) .225 (5.71) .120 (3.04) .060 (1.52) .132 (3.35) Front Mounting 2.423 (61.54) 1.212 (30.78) 2.500 (63.50) 1.250 (31.75) .545 (13.84) .273 (6.93) .088 (2.23) .044 (1.11) .083 (2.10) Rear Mounting 2.354 (59.79) 1.177 (29.89) 2.500 (63.50) 1.250 (31.75) .481 (12.21) .241 (6.12) .088 (2.23) .044 (1.11) .132 (3.35) Front Mounting 2.297 (58.34) 1.149 (29.18) 2.406 (61.11) 1.203 (30.55) .623 (15.82) .312 (7.92) .120 (3.04) .060 (1.52) .083 (2.10) Rear Mounting 2.218 (56.33) 1.109 (28.16) 2.406 (61.11) 1.203 (30.55) .555 (14.09) .278 (7.06) .120 (3.04) .060 (1.52) .132 (3.35) Front Mounting 2.329 (59.15) 1.165 (29.59) 2.406 (61.11) 1.203 (30.55) .655 (16.63) .328 (8.33) .088 (2.23) .044 (1.11) .083 (2.10) Rear Mounting 2.250 (57.15) 1.125 (28.57) 2.406 (61.11) 1.203 (30.55) .587 (14.90) .294 (7.46) .088 (2.23) .044 (1.11) .132 (3.35) Front Mounting .874 (22.19) .437 (11.09) .984 (24.99) .492 (12.49) .513 (13.03) .257 (6.52) .120 (3.04) .060 (1.52) .083 (2.10) Rear Mounting .806 (20.47) .403 (10.23) .984 (24.99) .492 (12.49) .449 (11.40) .225 (5.71) .120 (3.04) .060 (1.52) .132 (3.35) Front Mounting .906 (23.01) .453 (11.50) .984 (24.99) .492 (12.49) .545 (13.84) .273 (6.93) .088 (2.23) .044 (1.11) .083 (2.10) Rear Mounting .838 (21.28) .419 (10.64) .984 (24.99) .492 (12.49) .481 (12.21) .241 (6.12) .088 (2.23) .044 (1.11) .132 (3.35) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 384 D Subminiature Panel Mounting Pin Front Mounting Pin Rear Mounting Pin Front Mounting Pin Rear Mounting .187 (4.75) MAX. ROLL OVER TYPICAL PIN PIN A B C H SOCKET SOCKET Socket Front Mounting Figure 1A Pin Rear Mounting Socket Rear Mounting Socket Front Mounting Socket Rear Mounting Figure 1B Pin Front Mounting Pin Rear Mounting Pin Front Mounting F PIN B C SOCKET SOCKET RIVET .031 (0.80) NOM. THICK .145 (3.70) MAX. ROLL OVER TYPICAL RIVET WASHER .031 (0.80) NOM. THICK Socket Float Mounting Socket Reverse Float Mounting Socket Float Mounting Combination of Mated Connectors A B C + .030 (+0.76) + .030 (+0.76) + .030 (+0.76) F NOTE: 1. A, B, C and H are dimensions betwen panels and represent the recommended limit to be used in the design of the connector mounting method. 2. It is recommended that only one assembly, either pin or socket, be float mounted. 3. Standard pin assemblies contained .015 (0.38) thick front shells on E and A sizes; .024 (.061) thick front shells on B, C, and D sizes. 4. Standard connectors accommodate a #4 screw. Float mount connectors accommodate a #2 screw. H + .030 (+0.76) -.000 (-0) -.000 (-0) -.000 (-0) + _.010 (+ _.025) -.000 (-0) 1 A, E Standard Standard .250 (6.35) .340 (8.63) .295 (7.49) - .295 (7.49) 1 B, C, D Standard Standard .238 (6.04) .343 (8.71) .298 (7.56) - .283 (7.18) 2 A, E Standard Float Mount .218 (5.53) - .263 (6.68) .120 (3.04) - 2 B, C, D Standard Float Mount .206 (5.23) - .266 (6.75) .120 (3.04) - 2 A, E Float Mount Standard .218 (5.53) - .263 (6.68) .120 (3.04) - 2 B, C, D Float Mount Standard .206 (5.23) - .251 (6.37) .130 (3.30) - 3 A, E Standard Rev. Float Mount - .358 (9.09) .313 (7.95) .120 (3.04) - 3 B, C, D Standard Rev. Float Mount - .361 (9.16) .301 (7.64) .120 (3.04) - 3 A, E Rev. Float Mount Standard - .358 (9.09) .313 (7.95) .120 (3.04) - 3 B, C, D Rev. Float Mount Standard - .355 (9.01) .310 (7.87) .130 (3.30) - Socket Socket Reverse Float Mounting Figure 3 Figure 2 Fig. No. Size Pin (See Note Below) WASHER PIN C A MIL-C-24308 Test Extracts Applicable to Class G Connectors Requirement Test Descriptions Mating/Unmating Force Method Shell Size Max Unmating (LBS) Max Mating (LBS) 1 2 3 4 5 6 10 17 24 30 10 17 28 39 49 MIL-STD-1344 Method 2013 Contact Retention Contacts shall be retained in their inserts by a 9 pound (minimum) force. The axial displacement of contacts shall not exceed .012 inch while under load. MIL-STD-1344 Method 2004 Insulation Resistance After humidity 1 Megohm (min) All othe condidtions 5000 Megohm (mm). MIL-STD-1344 Method 3003 Contact Resistance After salt spray not to exceed 55 millivolts max. #20 AWG, 7.5 Amp MIL-STD-1344 Method 3004 Vibration No damage and no loosening of parts due to vibration. No interruption of eletrical continulty longer than 1 microsecond. MIL-STD-1344 Method 2005 Test Cond. 4 Shock No damage and no loosening of parts. No interruption of eletrical continulty longer than 1 microsecond. MIL-STD-1344 Method 2004 Test Cond. E Durability No electrial or mechanical defects after 500 cycles of mating and unmating MIL-STD-1344 Method 2016 200 + _ 100 cycles/hour Salt Spray (Corrosion) No exposure of base metal due to corrosion which will affect performance. Product will meet further test as specified. MIL-STD-1344 Method 1001 Cond. B Fluid Immersion 20 hours. immersion MIL-H-5606 Hydraulic Fluid 20 hours, immersion MIL-L-23659 Lubricating Fluid Connectors shall meet mating/unmating force following immersion. MIL-STD-1344 Method 1016 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 385 MIL-C-39029 Crimp Contacts Military Part Number ITT Cannon Part Number Contact Size Contact Style Product Line MIL Specification M39029/4-110 M39029/4-111 M39029/4-113 M39029/5-115 M39029/5-116 M39029/5-118 030-9173-006 030-9205-007 030-9185-003 031-9174-004 031-9206-006 031-9186-003 20 16 12 20 16 12 Pin Pin Pin Soc Soc Soc DPK, PV DPK, PV DPK, PV DPK, PV DPK, PV DPK, PV MIL-C-83733 MIL-C-26482, Series 2 75-91 157-166 M39029/11-144 M39029/11-145 M39029/11-146 M39029/11-147 M39029/12-148 M39029/12-149 M39029/12-150 M39029/12-151 030-1975-008 030-1892-004 030-9083-012 030-1909-002 031-1113-008 031-1047-003 031-1271-000 031-1059-003 22 20 16 12 22 20 16 12 Pin Pin Pin Pin Soc Soc Soc Soc DPX*, DPK* DPX* DPX* DPX* DPX* DPX* DPX* DPX* MIL-C-81659 25-40 M39029/29-212 M39029/29-213 M39029/29-214 M39029/29-215 M39029/29-216 M39029/30-217 M39029/30-218 M39029/30-219 M39029/30-220 M39029/30-221 M39029/30-222 030-3196-008 030-3197-007 030-3198-003 030-3199-004 030-3200-003 031-3113-005 031-3114-008 031-3115-006 031-3116-003 031-3117-003 031-3118-003 16 12 8 4 0 16S 16 12 8 4 0 Pin Pin Pin Pin Pin Soc Soc Soc Soc Soc Soc MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MS/CV345* MIL-C-5015 188-195 M39029/31-228 M39029/31-240 M39029/32-247 M39029/32-259 030-9032-003 030-9036-000 031-9095-003 031-9074-002 16 20 16 20 Pin Pin Soc Soc KPSE KPSE KPSE KPSE MIL-C-26482, Series I 140-156 M39029/50-340 M39029/51-341 249-1825-001 249-1826-000 12 12 Pin Soc DPK (Coax) DPK (Coax) MIL-C-83733 75-91 M39029/56-348 M39029/56-351 M39029/56-352 M39029/56-353 031-1147-007 031-1250-001 031-1251-001 031-1237-000 22D 20 16 12 Soc Soc Soc Soc KJL/KJA KJL/KJA KJL/KJA KJL/KJA MIL-C-38999, Series I, II, III 115-139 M39029/57-354 M39029/57-355 M39029/57-356 M39029/57-357 M39029/57-358 M39029/57-359 031-1147-000 031-1122-022 031-1125-022 031-1124-020 031-1123-016 031-1238-000 22D 22M 22 20 16 12 Soc Soc Soc Soc Soc Soc KJ & DPK* KJ Only KJ Only KJ Only KJ Only KJ Only MIL-C-38999, Series II 122-127 M39029/58-360 M39029/58-361 M39029/58-362 M39029/58-363 M39029/58-364 M39029/58-365 030-2042-000 030-1993-022 030-1999-022 030-1997-020 030-1995-016 030-2155-000 22D 22M 22 20 16 12 Pin Pin Pin Pin Pin Pin KJL/KJ/KJA & DPK KJL/KJ/KJA KJL/KJ/KJA KJL/KJ/KJA KJL/KJ/KJA KJL/KJ/KJA MIL-C-38999, Series I, II, III 115-139 M39029/63-368 M39029/64-369 031-1007-042 330-5291-037 20 20 Soc Pin D*MA D*MA MIL-C-24308 332-344 M39029/83-450 M39029/83-451 M39029/83-508 M39029/84-452 M39029/84-453 M39029/84-509 030-8008-800 030-8009-100 030-8085-700 031-8004-300 031-8004-400 031-8005-700 2022 2028 2020 2022 2028 2020 Pin Pin Pin Soc Soc Soc KFS-(Canada) KFS-(Canada) KFS-(Canada) KFS-(Canada) KFS-(Canada) KFS-(Canada) MIL-C-28840 218-223 Pages Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 386