NB100LVEP91 2.5 V/3.3 V Any Level Positive Input to -2.5 V/-3.3 V LVNECL Output Translator http://onsemi.com Description The NB100LVEP91 is a triple any level positive input to NECL output translator. The device accepts LVPECL, LVTTL, LVCMOS, HSTL, CML or LVDS signals, and translates them to differential LVNECL output signals (-2.5 V / -3.3 V). To accomplish the level translation the LVEP91 requires three power rails. The VCC pins should be connected to the positive power supply, and the VEE pin should be connected to the negative power supply. The GND pins are connected to the system ground plane. Both VEE and VCC should be bypassed to ground via 0.01 mF capacitors. Under open input conditions, the D input will be biased at VCC/2 and the D input will be pulled to GND. These conditions will force the Q outputs to a low state, and Q outputs to a high state, which will ensure stability. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features * * * * * * Maximum Input Clock Frequency > 2.0 GHz Typical Maximum Input Data Rate > 2.0 Gb/s Typical 500 ps Typical Propagation Delay Operating Range: VCC = 2.375 V to 3.8 V; VEE = -2.375 V to -3.8 V; GND = 0 V Q Output will Default LOW with Inputs Open or at GND Pb-Free Packages are Available* MARKING DIAGRAMS* 20 20 NB100LVEP91 AWLYYWWG 1 SO-20 WB DW SUFFIX CASE 751D 1 24 1 24 1 24 PIN QFN MN SUFFIX CASE 485L A WL, L YY, Y WW, W G or G N100 VP91 ALYWG G = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2008 July, 2008 - Rev. 18 1 Publication Order Number: NB100LVEP91/D NB100LVEP91 Positive Level Input D0 R1 D0 R1 D1 R1 D1 R1 NECL Output Q0 R2 Q0 Q1 R2 Q1 VCC VBB GND D2 R1 D2 R1 Q2 R2 VEE Q2 Figure 1. Logic Diagram Table 1. PIN DESCRIPTION Pin SOIC QFN Name I/O Default State 1, 20 3, 4, 12 VCC - - Positive Supply Voltage. All VCC Pins must be Externally Connected to Power Supply to Guarantee Proper Operation. 10 15, 16 VEE - - Negative Supply Voltage. All VEE Pins must be Externally Connected to Power Supply to Guarantee Proper Operation. 14, 17 19, 20, 23, 24 GND - - Ground. 4, 7 7, 11 VBB - - ECL Reference Voltage Output 2, 5, 8 5, 8, 13 D[0:2] LVPECL, LVDS, LVTTL, LVCMOS, CML, HSTL Input Low Noninverted Differential Inputs [0:2]. Internal 75 kW to GND. 3, 6, 9 6, 9, 14 D[0:2] LVPECL, LVDS, LVTTL,LVCMOS, CML, HSTL Input High Inverted Differential Inputs [0:2]. Internal 75 kW to GND and 75 kW to VCC. When Inputs are Left Open They Default to (VCC - GND) / 2. 19,16,13 2, 22, 18 Q[0:2] LVNECL Output - Noninverted Differential Outputs [0:2]. Typically Terminated with 50 W to VTT = VCC - 2 V 18,15,12 1, 21, 17 Q[0:2] LVNECL Output - Inverted Differential Outputs [0:2]. Typically Terminated with 50 W to VTT = VCC - 2 V 11 10 NC - - No Connect. The NC Pin is NOT Electrically Connected to the Die and may Safely be Connected to Any Voltage from VEE to VCC. N/A - EP - Description Exposed Pad. (Note 1) 1. The thermally conductive exposed pad on the package bottom (see case drawing) must be attached to a heat sinking conduit and may only be electrically connected to VEE (not GND). http://onsemi.com 2 NB100LVEP91 GND GND Q1 24 VCC Q0 Q0 GND Q1 Q1 GND Q2 Q2 NC 20 18 12 19 17 16 15 14 13 11 NB100LVEP91 1 2 3 VCC D0 D0 VBB D1 4 5 6 7 8 D1 VBB D2 9 10 D2 VEE Q1 GND GND 22 21 20 19 Q0 1 18 Q2 Q0 2 17 Q2 VCC 3 16 VEE VCC 4 15 VEE D0 5 14 D2 D0 6 13 D2 NB100LVEP91 7 VBB Figure 2. SOIC-20 Lead Pinout (Top View)* 23 8 9 D1 D1 10 11 12 NC VBB VCC Figure 3. QFN-24 Lead Pinout (Top View)* *All VCC, VEE and GND pins must be externally connected to a power supply. *All VCC, VEE and GND pins must be externally connected to a power supply. The thermally conductive exposed pad on the package bottom (see case drawing) must be attached to a sufficient heat-sinking conduit and may only be electronically connected to VEE (not GND). Table 2. ATTRIBUTES Characteristics Value Internal Input Pulldown Resistor (R1) 75 kW Internal Input Pullup Resistor (R2) 75 kW ESD Protection Human Body Model Machine Model Charged Device Model Moisture Sensitivity (Note 2) SO-20 WB QFN-24 Flammability Rating Exposed Pad (EP) Oxygen Index: 28 to 34 Transistor Count > 2 kV > 150 V > 2 kV Pb Pkg Pb-Free Pkg Level 1 Level 1 Level 3 Level 1 UL 94 V-0 @ 0.125 in 446 Devices Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test 2. For additional information, see Application Note AND8003/D. http://onsemi.com 3 NB100LVEP91 Table 3. MAXIMUM RATINGS Symbol Rating Unit VCC Positive Power Supply Parameter GND = 0 V Condition 1 Condition 2 3.8 to 0 V VEE Negative Power Supply GND = 0 V -3.8 to 0 V VI Positive Input Voltage GND = 0 V VI VCC 3.8 to 0 V VOP Operating Voltage GND = 0 V VCC - VEE 7.6 to 0 V Iout Output Current Continuous Surge 50 100 mA mA IBB PECL VBB Sink/Source 0.5 mA TA Operating Temperature Range -40 to +85 C Tstg Storage Temperature Range -65 to +150 C qJA Thermal Resistance (Junction-to-Ambient) JESD 51-3 (1S-Single Layer Test Board) 0 lfpm 500 lfpm SOIC-20 SOIC-20 90 60 C/W C/W qJA Thermal Resistance (Junction-to-Ambient) JESD 51-6 (2S2P Multilayer Test Board) with Filled Thermal Vias 0 lfpm 500 lfpm QFN-24 QFN-24 37 32 C/W C/W qJC Thermal Resistance (Junction-to-Case) Standard Board SOIC-20 QFN-24 30 to 35 11 C/W C/W Tsol Wave Solder 225 225 C Pb Pb-Free Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 4. DC CHARACTERISTICS POSITIVE INPUTS VCC = 2.5 V, VEE = -2.375 to -3.8 V, GND = 0 V (Note 3) -40C Symbol Characteristic 25C 85C Min Typ Max Min Typ Max Min Typ Max Unit 10 14 20 10 14 20 10 14 20 mA ICC Positive Power Supply Current VIH Input HIGH Voltage (Single-Ended) 1335 VCC 1335 VCC 1335 VCC mV VIL Input LOW Voltage (Single-Ended) GND 875 GND 875 GND 875 mV VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 4) 0 2.5 0 2.5 0 2.5 V IIH Input HIGH Current (@ VIH) 150 mA IIL Input LOW Current (@ VIL) 150 D D 0.5 -150 150 0.5 -150 0.5 -150 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 3. Input parameters vary 1:1 with VCC. VCC can vary +1.3 V / -0.125 V. 4. VIHCMR min varies 1:1 with GND. VIHCMR max varies 1:1 with VCC. http://onsemi.com 4 NB100LVEP91 Table 5. DC CHARACTERISTICS POSITIVE INPUT VCC = 3.3 V; VEE = -2.375 V to -3.8 V; GND = 0 V (Note 5) -40C Symbol Characteristic 25C 85C Min Typ Max Min Typ Max Min Typ Max Unit 10 16 24 10 16 24 10 16 24 mA ICC Positive Power Supply Current VIH Input HIGH Voltage (Single-Ended) 2135 VCC 2135 VCC 2135 VCC mV VIL Input LOW Voltage (Single-Ended) GND 1675 GND 1675 GND 1675 mV VBB PECL Output Voltage Reference 1775 1975 1775 1975 1775 1975 mV VIHCMR Input HIGH Voltage Common Mode Range (Differential Configuration) (Note 6) 3.3 0 3.3 0 3.3 V IIH Input HIGH Current (@ VIH) 150 mA IIL Input LOW Current (@ VIL) 1875 0 1875 150 D D 0.5 -150 1875 150 0.5 -150 0.5 -150 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 5. Input parameters vary 1:1 with VCC. VCC can vary +0.5 / -0.925 V. 6. VIHCMR min varies 1:1 with GND. VIHCMR max varies 1:1 with VCC. Table 6. DC CHARACTERISTICS NECL OUTPUT VCC = 2.375 V to 3.8 V; VEE = -2.375 V to -3.8 V; GND = 0 V (Note 7) -40C Symbol Characteristic Min Typ 25C Max Min Typ 85C Max Min Typ Max Unit IEE Negative Power Supply Current 40 50 60 38 50 68 38 50 68 mA VOH Output HIGH Voltage (Note 8) -1145 -1020 -895 -1145 -1020 -895 -1145 -1020 -895 mV VOL Output LOW Voltage (Note 8) -1945 -1770 -1600 -1945 -1770 -1600 -1945 -1770 -1600 mV NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 7. Output parameters vary 1:1 with GND. 8. All loading with 50 W resistor to GND - 2.0 V. http://onsemi.com 5 NB100LVEP91 Table 7. AC CHARACTERISTICS VCC = 2.375 V to 3.8 V; VEE = -2.375 V to -3.8 V; GND = 0 V -40C Symbol Characteristic Min Typ 25C Max 85C Min Typ Max 600 525 250 800 750 550 375 300 500 450 600 675 Min Typ Max 550 400 150 800 750 500 400 300 550 500 650 750 ps Unit VOUTPP Output Voltage Amplitude (Figure 4) (Note 9) fin v 1.0 GHz fin v 1.5 GHz fin v 2.0 GHz 575 525 300 800 750 600 tPLH tPHL0 Propagation Delay D to Q Differential Single-Ended 375 300 500 450 600 650 tSKEW Pulse Skew (Note 10) Output-to-Output (Note 11) Part-to-Part (Diff) (Note 11) 15 25 50 75 95 125 15 30 50 75 105 125 15 30 70 80 105 150 ps tJITTER RMS Random Clock Jitter (Note 12) fin = 2.0 GHz Peak-to-Peak Data Dependant Jitter fin = 2.0 Gb/s (Note 13) 0.5 20 2.0 0.5 20 2.0 0.5 20 2.0 ps VINPP Input Voltage Swing (Differential Configuration) (Note 14) 200 800 1200 200 800 1200 200 800 1200 mV tr, tf Output Rise/Fall Times @ 50 MHz (20% - 80%) 75 150 250 75 150 250 75 150 275 ps Q, Q mV NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 9. Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50 W to GND - 2.0 V. Input edge rates 150 ps (20% - 80%). 10. Pulse Skew = |tPLH - tPHL| 11. Skews are valid across specified voltage range, part-to-part skew is for a given temperature. 12. RMS Jitter with 50% Duty Cycle Input Clock Signal. 13. Peak-to-Peak Jitter with input NRZ PRBS 231-1 at 2.0 Gb/s. 14. Input voltage swing is a single-ended measurement operating in differential mode. The device has a DC gain of 50. 10 9.0 750 8.0 AMP 7.0 650 6.0 550 5.0 4.0 450 3.0 2.0 350 1.0 RMS JITTER 250 RMS JITTER (ps) OUTPUT VOLTAGE AMPLITUDE (mV) 850 0.5 1.0 1.5 2.0 0 2.5 INPUT FREQUENCY (GHz) Figure 4. Output Voltage Amplitude (VOUTPP) / RMS Jitter vs. Input Frequency (fin) at Ambient Temperature (Typical) D VINPP = VIH(D) - VIL(D) D Q VOUTPP = VOH(Q) - VOL(Q) Q tPHL tPLH Figure 5. AC Reference Measurement http://onsemi.com 6 NB100LVEP91 Application Information and the maximum input swing of 3.0 V. Within these conditions, the input voltage can range from VCC to GND. Examples interfaces are illustrated below in a 50 W environment (Z = 50 W) All NB100LVEP91 inputs can accept LVPECL, LVTTL, LVCMOS, HSTL, CML, or LVDS signal levels. The limitations for differential input signal (LVDS, HSTL, LVPECL, or CML) are the minimum input swing of 150 mV VCC Z VCC LVEP91 LVDS Driver VCC D LVPECL Driver Z D Z Z D 50 W GND VTT = VCC - 2.0 V VEE GND Figure 6. Standard LVPECL Interface VCC GND VCC VCC 50 W Z Z D HSTL Driver LVEP91 Z VEE Figure 7. Standard LVDS Interface VCC VCC 50 W D CML Driver LVEP91 Z D 50 W LVEP91 100 W D 50 W GND VCC D 50 W GND GND VEE GND GND VEE GND Figure 8. Standard HSTL Interface VCC Z VCC VCC LVEP91 LVCMOS Driver D LVTTL Driver 1.5 V Figure 9. Standard 50 W Load CML Interface VCC Z D D LVEP91 Open D (externally generated reference voltage) GND GND VEE GND Figure 10. Standard LVTTL Interface GND VEE Figure 11. Standard LVCMOS Interface (D will default to VCC/2 when left open. A reference voltage of VCC/2 should be applied to D input, if D is interfaced to CMOS signals.) http://onsemi.com 7 NB100LVEP91 ORDERING INFORMATION Package Shipping SO-20 38 Units / Rail NB100LVEP91DWG SO-20 (Pb-Free) 38 Units / Rail NB100LVEP91DWR2 SO-20 1000 / Tape & Reel SO-20 (Pb-Free) 1000 / Tape & Reel QFN-24 92 Units / Rail NB100LVEP91MNG QFN-24 (Pb-Free) 92 Units / Rail NB100LVEP91MNR2 QFN-24 3000 / Tape & Reel QFN-24 (Pb-Free) 3000 / Tape & Reel Device NB100LVEP91DW NB100LVEP91DWR2G NB100LVEP91MN NB100LVEP91MNR2G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Q Zo = 50 W D Receiver Device Driver Device Q D Zo = 50 W 50 W 50 W VTT VTT = GND - 2.0 V Figure 12. Typical Termination for Output Driver and Device Evaluation (See Application Note AND8020/D - Termination of ECL Logic Devices.) Resource Reference of Application Notes AN1405/D - ECL Clock Distribution Techniques AN1406/D - Designing with PECL (ECL at +5.0 V) AN1503/D - ECLinPSt I/O SPiCE Modeling Kit AN1504/D - Metastability and the ECLinPS Family AN1568/D - Interfacing Between LVDS and ECL AN1672/D - The ECL Translator Guide AND8001/D - Odd Number Counters Design AND8002/D - Marking and Date Codes AND8020/D - Termination of ECL Logic Devices AND8066/D - Interfacing with ECLinPS AND8090/D - AC Characteristics of ECL Devices http://onsemi.com 8 NB100LVEP91 PACKAGE DIMENSIONS SO-20 WB CASE 751D-05 ISSUE G A 20 q X 45 _ E h 1 10 20X B B 0.25 M T A S B S A L H M 10X 0.25 NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF B DIMENSION AT MAXIMUM MATERIAL CONDITION. 11 B M D 18X e A1 SEATING PLANE C T http://onsemi.com 9 DIM A A1 B C D E e H h L q MILLIMETERS MIN MAX 2.35 2.65 0.10 0.25 0.35 0.49 0.23 0.32 12.65 12.95 7.40 7.60 1.27 BSC 10.05 10.55 0.25 0.75 0.50 0.90 0_ 7_ NB100LVEP91 PACKAGE DIMENSIONS QFN 24 MN SUFFIX 24 PIN QFN, 4x4 CASE 485L-01 ISSUE O D A PIN 1 IDENTIFICATION NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. B E 2X 0.15 C 2X DIM A A1 A2 A3 b D D2 E E2 e L 0.15 C A2 0.10 C A 0.08 C A3 A1 SEATING PLANE REF D2 e L 7 C MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.60 0.80 0.20 REF 0.23 0.28 4.00 BSC 2.70 2.90 4.00 BSC 2.70 2.90 0.50 BSC 0.35 0.45 12 6 13 E2 24X b 1 0.10 C A B 18 24 19 e 0.05 C ECLinPS is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NB100LVEP91/D