IP series Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when "ON". Illuminated and non-illuminated Compact Behind-panel depth less than 20 mm (.787) Variety of terminal options Sealed to IP 67 B ENVIRONMENTAL SPECIFICATIONS MATERIALS * Degree of protection : IP 67 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Robustness (non-illuminated sw.) : IK06 according to EN 50102 (1 joule) * Operating temperature : -40C to +85C ELECTRICAL AND GENERAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 100mA 24VDC - life expectancy 200 000 cycles 2A 125VAC - life expectancy 10 000 cycles (tested according to UL 1054) * Initial contact resistance : 50 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 VAC rms between terminals 1.000 VAC rms between terminals and frame * Panel thickness : 1,5 mm (.059) min. - 5,5 mm (.217) max. * Total travel : 2,5 mm (.098) * Operating force : 5,5 N +/- 1N * Contact bounce : 10 ms * Torque : 1,5 Nm applied to nut * Soldering : 320C max. for 3 seconds * Case : PA-6T, UL 94-V0 * Plunger : polyamide 6/6 * Bushing/bezel : zinc die-cast (zamak), black painted * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2, UL approved * LED wire : AWG26 * Lens : polycarbonate * Terminal seal : epoxy LED COMPONENT SPECIFICATIONS LED colour Forward current Forward Voltage Max. lumin. intensity Super red (L0S) 20mA 2V 180 mcd Yellow (L0Y) 20mA 2V 280 mcd Green (L0G) 10mA 2V 28 mcd Blue (L0B) 10mA 3,5V 22 mcd A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current B-26 www.apem.com APEM IP series Latching action pushbutton switches for harsh environments Overview IP Electrical function Bezel shape SERIES C R 1 Square Round OFF - ON Terminals S F Z1 P Solder lug Wire leads Quick-connect Straight PC Contacts AD Silver, gold plated B Plunger colour 1 1/4 2 3 5 6 7/1 8 9 Blue Dark blue Black Green Yellow Red White Chrome plated Orange LED colour Blank L0S L0Y L0G L0B Non-illum. Red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A sealing boot is available to protect the switches against frost and sand (P/N U5125). It is presented at the end of the IP series and in section H. Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-Ring. Packaging unit : 25 pieces APEM www.apem.com B-27 IP series Latching action pushbutton switches for harsh environments Square or round - illuminated Quick-connect Z1 OFF ON 3.20 (.125) 2.80 (.110) 2.80 (.110) MODEL STRUCTURE Wire lead terminals IPC1FAD OFF - ON o12.00x0.75SI (.472DIAx0.75IS) 14.10 (.555) ON 1.50 Min (.059 Min) 7.00 (.275) - 17.50 (.688SQ) 8.20 (.322) OFF 12.40 (.488) Solder lug terminals IPC1SAD 12.00 (.472SQ) 5.70 (.224) Flat Square models 50010 (19.68.393) EPOXY Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD - ON ON o12.00x0.75SI (.472DIAx0.75IS) 14.10 (.555) OFF - 1.50 Min (.059 Min) 7.00 (.275) Wire lead terminals IPR1FAD OFF Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD 50010 (19.68.393) EPOXY PLUNGER COLOUR o17.50 (.688DIA) 8.20 (.322) Solder lug terminals IPR1SAD o12.00 (.472DIA) 5.70 (.224) Flat Round models 12.40 (.488) B 1.40 (.055) 1.20 (.047) 3.40 (.133) 1.00 (.039) Solder lug S 8.40 (.330) 2.40 (.094) Straight P 2.30 (.090) * Four LED colours * Tin plated LED terminals Wire colours : black : contact, red : LED anode(+), blue : LED cathode(-) 1 : blue - 1/4 : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7/1 : white - 8 : chrome plated - 9 : orange LED COLOUR L0S : red - L0Y : yellow - L0G : green - L0B : blue B-28 www.apem.com APEM IP series Latching action pushbutton switches for harsh environments Square or round - non-illuminated MODEL STRUCTURE ON 17.50 (.688SQ) 8.20 (.322) - 1.50 Min (.059 Min) 7.00 (.275) o12.00x0.75SI (.472DIAx0.75IS) OFF - ON 14.10 (.555) Wire lead terminals IPC1FAD OFF 12.40 (.488) Solder lug terminals IPC1SAD 12.00 (.472SQ) 5.70 (.224) Flat Square models EPOXY 50010 (19.68.393) B Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD - 8.20 (.322) ON O17.50 (.688DIA) o12.00x0.75SI (.472DIAx0.75IS) ON 14.10 (.555) OFF - 1.50 Min (.059 Min) 7.00 (.275) Wire lead terminals IPR1FAD OFF 12.40 (.488) Solder lug terminals IPR1SAD O12.00 (.472DIA) 5.70 (.224) Flat Round models PLUNGER COLOUR OPTION 1 : blue - 1/4 : dark blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7/1 : white 8 : chrome plated - 9 : orange 104 : high plunger (round only) O12.00 (.472DIA) 4.70 (.185) Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD 50010 (19.68.393) EPOXY MOUNTING Matrix mounting 1.50min-5.50Max (.059 min-.216max) Panel cut-out 12.90 (.507) 20.00 (.787) O13.60 (.535DIA) 19.10 (.751) 20.00 (.787) 1 20.00 (.787) Back of panel space requirement o13.50 (.531DIA) APEM www.apem.com B-29