B-26 APEM www.apem.com
IP series
Latching action pushbutton switches for harsh environments
Distinctive features and specifications
B
❑ Latching action
Actuator remains in the low position when “ON”.
❑ Illuminated and non-illuminated
❑ Compact
Behind-panel depth less than 20 mm (.787)
❑ Variety of terminal options
❑ Sealed to IP 67
ENVIRONMENTAL SPECIFICATIONS
• Degree of protection : IP 67
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated sw.) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL AND GENERAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
100mA 24VDC - life expectancy 200 000 cycles
2A 125VAC - life expectancy 10 000 cycles (tested according to UL 1054)
• Initial contact resistance : 50 mΩmax.
• Insulation resistance : 1 GΩmin. at 500VDC
• Dielectric strength : 1.500 VAC rms between terminals
1.000 VAC rms between terminals and frame
• Panel thickness : 1,5 mm (.059) min. - 5,5 mm (.217) max.
• Total travel : 2,5 mm (.098)
• Operating force : 5,5 N +/- 1N
• Contact bounce : 10 ms
• Torque : 1,5 Nm applied to nut
• Soldering : 320°C max. for 3 seconds
MATERIALS
• Case : PA-6T, UL 94-V0
• Plunger : polyamide 6/6
• Bushing/bezel : zinc die-cast
(zamak), black painted
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm2, UL approved
• LED wire : AWG26
• Lens : polycarbonate
• Terminal seal : epoxy
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
10mA
10mA
Forward Voltage
2V
2V
2V
3,5V
Max. lumin. intensity
180 mcd
280 mcd
28 mcd
22 mcd
Yellow (L0Y)
Green (L0G)
Blue (L0B)
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
APEM www.apem.com B-27
IP series
Latching action pushbutton switches for harsh environments
Overview
B
IP
Bezel shape
CSquare
RRound
Terminals
SSolder lug
FWire leads
Z1 Quick-connect
PStraight PC
Electrical function
1OFF - ON
Plunger colour
1Blue
1/4 Dark blue
2Black
3Green
5Yellow
6Red
7/1 White
8Chrome plated
9Orange
Contacts
AD Silver, gold
plated
LED colour
Blank Non-illum.
L0S Red
L0Y Yellow
L0G Green
L0B Blue
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
A sealing boot is available to protect the switches against frost and sand (P/N U5125).
It is presented at the end of the IP series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-Ring.
Packaging unit : 25 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
SERIES
B-28 APEM www.apem.com
IP series
Latching action pushbutton switches for harsh environments
Square or round - illuminated
B
MODEL
STRUCTURE
• Four LED colours
• Tin plated LED terminals
Square models
ø12.00x0.75SI
500±10
(19.68±.393) 1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.322)
12.40
(.488) 8.20 7.00
(.275)
12.00
(.472SQ)
(.224)
5.70
17.50
(.688SQ)
(.555)
14.10
EPOXY
➞Flat
Solder lug terminals
IPC1SAD OFF - ON
Wire lead terminals
IPC1FAD OFF - ON
Round models
500±10
(19.68±.393) 1.50 Min
(.059 Min)
(.322)
12.40
(.488) 8.20 7.00
(.275)
ø12.00
(.472DIA)
(.224)
5.70
ø17.50
(.688DIA)
EPOXY
(.472DIAx0.75IS)
ø12.00x0.75SI
14.10
(.555)
➞Flat
Solder lug terminals
IPR1SAD OFF - ON
Wire lead terminals
IPR1FAD OFF - ON
PLUNGER COLOUR
1: blue - 1/4 : dark blue - 2: black - 3: green - 5: yellow - 6: red - 7/1 : white - 8: chrome plated - 9: orange
LED COLOUR
L0S : red - L0Y : yellow - L0G : green - L0B : blue
Wire colours : black : contact, red : LED anode(+), blue : LED cathode(-)
OFF ON
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
Quick-connect Z1 Solder lug S
(.039)
3.40
(.133)
1.00
Straight P
Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD
Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD
APEM www.apem.com B-29
IP series
Latching action pushbutton switches for harsh environments
Square or round - non-illuminated
B
MODEL
STRUCTURE
Square models
ø12.00x0.75SI
500±10
(19.68±.393) 1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.322)
12.40
(.488) 8.20 7.00
(.275)
12.00
(.472SQ)
(.224)
5.70
17.50
(.688SQ)
EPOXY
(.555)
14.10
➞Flat
Solder lug terminals
IPC1SAD OFF - ON
Wire lead terminals
IPC1FAD OFF - ON
Round models
ø12.00x0.75SI
500±10
(19.68±.393) 1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.322)
12.40
(.488) 8.20 7.00
(.275)
Ø12.00
(.472DIA)
(.224)
5.70
Ø17.50
(.688DIA)
(.555)
14.10
EPOXY
➞Flat
Solder lug terminals
IPR1SAD OFF - ON
Wire lead terminals
IPR1FAD OFF - ON
PLUNGER COLOUR
1: blue - 1/4 : dark blue - 2: black - 3: green
5: yellow - 6: red - 7/1 : white
8: chrome plated - 9: orange
MOUNTING
Panel cut-out Matrix mounting
Back of panel space requirement
Ø13.60
(.535DIA)
12.90
(.507)
(.531DIA)
ø13.50
1
1.50min-5.50Max
(.059 min-.216max)
20.00
(.787)
20.00
(.787)(.787)
20.00
(.751)
19.10
OPTION
104 : high plunger (round only)
Ø12.00
(.472DIA)
(.185)
4.70
Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD
Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD
