T-1 (3 mm) High Intensity LED Lamps Technical Data Features * High Intensity * Choice of 3 Bright Colors High Efficiency Red Yellow High Performance Green * Popular T-1 Diameter Package * Selected Minimum Intensities * Narrow Viewing Angle Package Dimensions HLMP-132x Series HLMP-142x Series HLMP-152x Series * * * * General Purpose Leads Reliable and Rugged Available on Tape and Reel For more information, please refer to Tape and Reel Option Data Sheet Description This family of T-1 lamps is specially designed for applications requiring higher on-axis intensity than is achievable with a standard lamp. The light generated is focused to a narrow beam to achieve this effect. Selection Guide Part Number HLMP-1320-G00xx HLMP-1320 GH0xx HLMP-1321 HLMP-1321-G00xx HLMP-1321-HI0xx HLMP-1420 HLMP-1420-F00xx HLMP-1421 HLMP-1421-F00xx HLMP-1421-FG0xx HLMP-1520 HLMP-1520-E00xx HLMP-1521 HLMP-1521-E00xx HLMP-1521-EF0xx Package Description Untinted, Nondiffused Tinted, Nondiffused Color High Efficiency Red Microtinted, Nondiffused Yellow Tinted, Nondiffused Microtinted, Nondiffused Tinted, Nondiffused Green Luminous Intensity Iv (mcd) @ 10 mA Min. Max. 8.6 - 8.6 27.6 8.6 - 8.6 - 13.8 44.0 9.2 - 9.2 - 9.2 - 9.2 - 9.2 29.4 6.7 - 6.7 - 6.7 - 6.7 - 6.7 21.2 2 Part Numbering System HLMP - 1 x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads A1: Right Angle Housing, Uneven Leads A2: Right Angle Housing, Even Leads Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Lens Options 20: Untinted or Microtinted, Non-diffused 21: Tinted, Non-diffused Color Options 3: GaP HER 4: GaP Yellow 5: GaP Green Package Options 1: T-1 (3 mm) Absolute Maximum Ratings at TA = 25C Parameter Red Yellow Green Units Peak Forward Current 90 60 90 mA Average Forward Current[1] 25 20 25 mA 30 20 30 mA 135 85 135 mW 5 5 5 V Transient Forward Current[4] (10 sec Pulse) 500 500 500 mA LED Junction Temperature 110 110 110 C -55 to +100 -55 to +100 -20 to +100 C DC Current[2] Power Dissipation[3] Reverse Voltage (I R = 100 A) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] -55 to +100 260C for 5 seconds Notes: 1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions. 2. For Red and Green series derate linearly from 50C at 0.5 mA/C. For Yellow series derate linearly from 50C at 0.2 mA/C. 3. For Red and Green series derate power linearly from 25C at 1.8 mW/C. For Yellow series derate power linearly from 50C at 1.6 mW/C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings. 3 Electrical Characteristics at TA = 25C Symbol IV Description Luminous Intensity 21/2 Including Angle Between Half Luminous Intensity Points PEAK Peak Wavelength 1/2 d s C RJ-PIN VF Spectral Line Halfwidth Dominant Wavelength Speed of Response Capacitance Thermal Resistance Forward Voltage VR Reverse Breakdown Voltage V Luminous Efficacy Device HLMP- Min. Typ. 1320 1321 8.6 8.6 30 30 mcd IF = 10 mA (Figure 3) 1420 1421 9.2 9.2 15 15 mcd IF = 10 mA (Figure 8) 1520 1521 6.7 6.7 22 22 mcd IF = 10 mA (Figure 3) All 45 Deg. IF = 10 mA See Note 1 (Figures 6, 11, 16, 21) 132x 635 nm 142X 152X 583 565 132x 40 142X 152X 36 28 132x 626 142X 152X 585 569 132x 90 142X 152X 90 500 132x 11 142X 152X 15 18 All 290 132x 1.9 2.4 142X 152X 2.0 2.1 2.4 2.7 All 5.0 Max. Units Test Conditions Measurement at Peak (Figure 1) nm nm See Note 2 (Figure 1) ns pF C/W VF = 0; f = 1 MHz Junction to Cathode Lead V IF = 10 mA V IR = 100 A 132x 145 lumens 142X 152X 500 595 Watt See Note 3 Notes: 1. 1/ 2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 2. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lv/v, where lv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. 4 Figure 1. Relative Intensity vs. Wavelength. T-1 High Efficiency Red Non-Diffused Figure 2. Forward Current vs. Forward Voltage Characteristics. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 5. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 6. Relative Luminous Intensity vs. Angular Displacement. 5 T-1 Yellow Non-Diffused Figure 7. Forward Current vs. Forward Voltage Characteristics. Figure 8. Relative Luminous Intensity vs. Forward Current. Figure 9. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Figure 10. Maximum Tolerable Peak Current vs. Pulse Duration. (IDC MAX as per MAX Ratings). Figure 11. Relative Luminous Intensity vs. Angular Displacement. 6 T-1 Green Non-Diffused Figure 12. Forward Current vs. Forward Voltage Characteristics. Figure 13. Relative Luminous Intensity vs. Forward Current. Figure 14. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak LED Current. Figure 15. Maximum Tolerable Peak Current vs. Pulse Duration. (IDCMAX as per MAX Ratings). Figure 16. Relative Luminous Intensity vs. Angular Displacement. 7 Intensity Bin Limits Color Red Yellow Bin G H I J K L M N O P Q R S T U V W X Y Z F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 10.3 16.6 16.6 26.5 26.5 42.3 42.3 67.7 67.7 108.2 108.2 173.2 173.2 250.0 250.0 360.0 360.0 510.0 510.0 800.0 800.0 1250.0 1250.0 1800.0 1800.0 2900.0 2900.0 4700.0 4700.0 7200.0 7200.0 11700.0 11700.0 18000.0 18000.0 27000.0 Intensity Bin Limits, continued Color Green Bin E F G H I J K L M N O P Q R S T U V W Intensity Range (mcd) Min. Max. 7.6 12.0 12.0 19.1 19.1 30.7 30.7 49.1 49.1 78.5 78.5 125.7 125.7 201.1 201.1 289.0 289.0 417.0 417.0 680.0 680.0 1100.0 1100.0 1800.0 1800.0 2700.0 2700.0 4300.0 4300.0 6800.0 6800.0 10800.0 10800.0 16000.0 16000.0 25000.0 25000.0 40000.0 Maximum tolerance for each bin limit is 18%. Color Categories Color Category # 6 5 4 3 2 1 3 2 4 5 Green Yellow Lambda (nm) Min. Max. 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 593.0 Maximum tolerance for each bin limit is 0.5 nm. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape & Reel, crimped leads, minimum increment 1800 pcs/bag 02 Tape & Reel, straight leads, minimum increment 1800 pcs/bag A1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag A2 Right Angle Housing, even leads, minimum increment 500 pcs/bag Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.semiconductor.agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. June 11, 2001 Obsoletes 5968-4163E (11/99) 5988-0931EN