BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L General Purpose Transistors http://onsemi.com NPN Silicon COLLECTOR 3 Features * AEC-Q101 Qualified and PPAP Capable * S Prefix for Automotive and Other Applications Requiring Unique * 1 BASE Site and Control Change Requirements These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant 2 EMITTER MAXIMUM RATINGS Rating 3 Symbol Value Unit Collector - Emitter Voltage VCEO 45 V Collector - Base Voltage VCBO 50 V Emitter - Base Voltage VEBO 5.0 V IC 500 mAdc SOT-23 CASE 318 STYLE 6 Symbol Max Unit MARKING DIAGRAM 225 1.8 mW mW/C 556 C/W Collector Current - Continuous 1 2 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board, (Note 1) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature PD RqJA 1 PD 300 2.4 mW mW/C RqJA 417 C/W TJ, Tstg -55 to +150 November, 2011 - Rev. 12 6x M G = Device Code x = A, B, or C = Date Code* = Pb-Free Package (Note: Microdot may be in either location) C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in 99.5% alumina. (c) Semiconductor Components Industries, LLC, 2011 6x M G G 1 *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Publication Order Number: BC817-16LT1/D BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = 10 mA) V(BR)CEO 45 - - V Collector -Emitter Breakdown Voltage (VEB = 0, IC = 10 mA) V(BR)CES 50 - - V Emitter -Base Breakdown Voltage (IE = 1.0 mA) V(BR)EBO 5.0 - - V Collector Cutoff Current (VCB = 20 V) (VCB = 20 V, TA = 150C) ICBO - - - - 100 5.0 nA mA 100 160 250 40 - - - - 250 400 600 - Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (IC = 100 mA, VCE = 1.0 V) (IC = 500 mA, VCE = 1.0 V) hFE BC817-16, SBC817-16 BC817-25, SBC817-25 BC817-40, SBC817-40 - Collector -Emitter Saturation Voltage (IC = 500 mA, IB = 50 mA) VCE(sat) - - 0.7 V Base -Emitter On Voltage (IC = 500 mA, VCE = 1.0 V) VBE(on) - - 1.2 V fT 100 - - MHz Cobo - 10 - pF SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mA, VCE = 5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) ORDERING INFORMATION Device Specific Marking Package 6A SOT-23 (Pb-Free) 6B SOT-23 (Pb-Free) 3000 / Tape & Reel BC817-16LT1G BC817-16LT3G SBC817-16LT3 BC817-25LT1G SBC817-25LT1G BC817-25LT3G 10,000 / Tape & Reel BC817-40LT1G BC817-40LT3G 10,000 / Tape & Reel 3000 / Tape & Reel SBC817-25LT3G SBC817-40LT1G Shipping 3000 / Tape & Reel SOT-23 (Pb-Free) 6C 10,000 / Tape & Reel SBC817-40LT3G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L 300 1 hFE, DC CURRENT GAIN 200 25C -55C 100 0 VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = 1 V 150C 0.001 0.01 0.01 0.1 1 Figure 1. DC Current Gain vs. Collector Current Figure 2. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.001 IC, COLLECTOR CURRENT (A) -55C IC/IB = 10 0.9 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.2 -55C 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 -55C 0.9 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. Base Emitter Saturation Voltage vs. Collector Current Figure 4. Base Emitter Voltage vs. Collector Current http://onsemi.com 3 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 5. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 6. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitances http://onsemi.com 4 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-25L, SBC817-25L 500 1 hFE, DC CURRENT GAIN 150C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = 1 V 400 300 25C 200 -55C 100 0 0.001 0.01 0.001 0.01 0.1 1 Figure 8. DC Current Gain vs. Collector Current Figure 9. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 25C 0.8 150C 0.7 0.6 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 10. Base Emitter Saturation Voltage vs. Collector Current Figure 11. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) -55C IC, COLLECTOR CURRENT (A) 0.9 0.2 0.1 IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.01 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Figure 12. Current Gain Bandwidth Product vs. Collector Current http://onsemi.com 5 1000 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 13. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 14. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-25L, SBC81725L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 15. Capacitances http://onsemi.com 6 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-40L, SBC817-40L 1 700 150C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 600 VCE = 1 V 500 25C 400 300 -55C 200 100 0 0.001 0.01 0.001 0.01 0.1 1 Figure 16. DC Current Gain vs. Collector Current Figure 17. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) -55C IC/IB = 10 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 18. Base Emitter Saturation Voltage vs. Collector Current Figure 19. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) 0.01 IC, COLLECTOR CURRENT (A) 0.9 0.2 -55C IC, COLLECTOR CURRENT (A) 1.1 1.0 150C 25C 0.1 0.001 1 0.1 IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Figure 20. Current Gain Bandwidth Product vs. Collector Current http://onsemi.com 7 1000 1 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0 0.01 0.1 1 IB, BASE CURRENT (mA) 10 +1 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 Figure 21. Saturation Region 10 100 IC, COLLECTOR CURRENT (mA) Figure 22. Temperature Coefficients 100 C, CAPACITANCE (pF) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS - BC817-40L, SBC817-40L Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) Figure 23. Capacitances http://onsemi.com 8 100 1000 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L TYPICAL CHARACTERISTICS - BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L 1 1 ms 10 ms 100 ms 1s Thermal Limit IC (A) 0.1 0.01 Single Pulse Test @ TA = 25C 0.001 0.01 0.1 1 VCE (Vdc) 10 Figure 24. Safe Operating Area http://onsemi.com 9 100 BC817-16L, SBC817-16L, BC817-25L, SBC817-25L, BC817-40L, SBC817-40L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 e b 0.25 q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 --- MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR L1 VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC817-16LT1/D