T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms RoHS peak reflow temperature rating 245C Models matched to leading quad and dual T1/E1/CEPT/ISDN-PRI transceivers Crosstalk: -65 dB or better UL1950 recognized (some parts pending approval) RoHS compliant versions available upon request Electrical Specifications @ 25C Ratio A, B RoHS Compliant Part Number C Std Temp. T1063NL Turns (Pri:Sec 2%) OCL @ 25C (mH MIN) F LL (H MAX) Cww (pFMAX) Package/ Schematic E Ex Temp F TX RX TX RX TX RX TX RX -- 1:1.36 1:1.36CT 1.2 1.2 .6 .6 35 35 TOU/1 Primary PIns Transmit Receive 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21 T1064NL -- 1:1.14 1:1.14CT 1.2 1.2 .6 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21 T1065NL T1105NL 1:2CT 1:2CT 1.2 1.2 .8 .8 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 24-25, 29-30, 34-35, 39-40 T1068NL T1108NL 1:2CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37 -- 1:1/1.26 1:2CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31- 32, 36-37 4-5, 9-10, 14-15, 19-20 T1071NL D T1073NL -- 1:2 1:2 1.2 1.2 .6 .6 35 35 TOU/4 1-3, 6-8, 11-13, 16-18 T1124NL T1114NL 1:2CT 1CT:2 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18 T1129NL -- 1:1.36CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/3 24-25, 29-30, 34-35, 39-40 4-5, 9-10, 14-15, 19-20 T1142NL T1231NL 1:2.4 1:1 1.0 1.0 .5 .5 35 35 TOU/5 1-2, 8-9, 11-12, 18-19 24-25, 27-28, 34-35, 37-38 T1145 NLD -- 1:2/2.4 1:0.79/1 1.0 1.0 1.0 1.0 35 35 TOU/6 1-2, 9-10, 11-12, 19-20 37-36, 35-34, 27-26, 25-24 -- TX1262NL 1:2 1:2 1.2 1.2 .7 .7 35 35 TOU/5 1-2, 6-7, 11-12, 16-17 3-4, 8-9, 13-14, 18-19 -- TX1264NL 1:2CT 1CT:1 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18 -- TX1266NL 1:2 1:1 -- TX1295NL 1:1.26CT 1:1.26CT 1.2 1.2 .6 .6 35 35 TOU/4 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 1 4-15, 19-20 24-25, 29-30, 34-35, 39-40 NOTE: Chart Notes and TOU Shcematics are on page 2. Mechanical TOU Weight . . . . . . . . . . . . 4.0 grams Tape & Reel . . . . . . . . . 250/reel Tube . . . . . . . . . . . . . . . . 15/tube Dimensions: Inches .010 mm Unless otherwise specified, all tolerances are 0,25 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 62787060 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 1 T622.J (11/09) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Notes from Electrical Specifications Table Transformer Selection Guide A. OCL (primary inductance) is measured at the primary winding. Turns ratio is specified primary: secondary. (CT = Center Tap). B. To make a 1CT:1 ratio from a 1CT:2CT ratio, use only one-half of the secondary (2CT) winding. C. It is possible to use the same transformer model for the three impedance levels of T1 (100 W) and CEPT (75 & 120 ). For specific connection information and resistor values, refer to IC vendor's data book. D. Dual Ratio Transformer (T1071NL and T1145NL) -- These transformers have tapped secondary windings to provide two turns ratios (T/R). Use the entire primary winding and connect the secondary pins listed below to obtain desired turns ratio: IC Mfr. Mindspeed (Conexant) Cirrus Logic (Crystal) Part Number Turns Secondary Turns Secondary Pins Ratio 1 Pins Ratio 2 1:1 40-39 1:1.26 40-38 1:1 35-34 1:1.26 35-33 T1071NL 1:1 30-29 1:1.26 30-28 1:1 25-24 1:1.26 25-23 1:2 40-39 1:2.4 40-38 1:2 33-32 1:2.4 33-31 T1145NL 1:2 30-29 1:2.4 30-28 1:2 23-22 1:2.4 23-21 E. Standard packaging for the surface mount package is anti-static tubes. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number, (i.e. T1063NLT). F. Extended Temperature Range Models -- For extended temperature range transformers (-40C to +85C operating temperature range), OCL (Open Circuit Inductance) for the primary winding) is specified at both -40C and +25C. At -40C, OCL is 600 H minimum. All other parameters are specified at +25C only. Standard temperature range is 0C to +70C Maxim (Dallas) Exar Infineon Technologies (Siemens) Intel (Level One) Schematics TOU IC Part Number BT8510 BT8510 CN8380 61318 61577 61304A/5A/535A/574A,/75 61304A/5A/535A/574A,/75 61582, 61583 61310, 61581 61584/84A 61584/82/83/A DS2196 DS2148/Q48 DS21352/Q352,DS21354/Q354 T5683A, 59L91 T5894,T5897,T5997 T5791/93/94/95 83L30/34/38 PEB 22504 PEB22554 PEB2256 3.3 V LXT 300/301 LXT 304/305/307 LXT 304/305/307 LXT 310/317/318 LXT 331 LXT 331, LXT 332 LXT 334, LXT 335 LXT 334, LXT 335 LXT 336 LXT 350, LXT 351, LXT 359 LXT 360/361/362/363 LXT 380/381/384/386/388 LXT 380/381/384/386/388 LXT 3104, LXT 3108 Comments T1/E1 T1/E1 120 E1 T1 & E1 75 E1 120 E1 IQ3 IQ5 3V 3.3V 3.3V E1/T1/J1 T1,E1 75 E1,120E1 T1,E1 T1/E1 75 E1 T1,E1 T1,E1 T1/E1 T1/E1 Octal SMT STD Temp EXT Temp T1071NL T1071NL T1124NL T1068NL T1065NL T1068NL T1071NL T1064NL T1068NL T1065NL T1064NL T1068NL T1068NL T1068NL T1065NL T1065NL T1071NL T1065NL T1142NL T1142NL T1142NL T1065NL T1065NL T1071NL T1068NL T1068NL T1065NL T1065NL T1071NL T1065NL T1068NL T1068NL T1068NL T1124NL T1068NL -- -- T1114NL T1108NL T1105NL T1108NL -- -- T1108NL T1105NL -- T1108NL T1108NL T1108NL T1105NL T1105NL -- T1105NL T1231NL T1231NL T1231NL T1105NL T1105NL -- T1108NL T1108NL T1105NL T1105NL -- T1105NL T1108NL T1108NL T1108NL T1114NL T1108NL Lucent T7688, T7690, T7698 CEPT T1063NL -- Technologies T7689, T7690, T7698 TLIU04C1 TLIU04C1 MT9076, MT9075 MT9074, MT9075 PM4318 DS1 DS1 CEPT T1064NL T1064NL T1063NL T1142NL T1068NL T1065NL -- -- -- T1231NL T1108NL T1105NL Zarlink (Mitel) PMC Sierra USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 62787060 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 2 T622.J (11/09) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Application Notes 1. ET Product -- All coils have an ET product of 10 V-sec minimum. 2. Flammability -- Materials used in the products are recognized as UL94-VO approved. Products meet the IEC 695-2-2 requirements (Needle Flame Test). 3. Balance Characteristics -- The transformers meet the requirements for longitudinal balance of FCC part 68. 4. Common Mode Rejection Ratio -- the CMRR for all transformers is better than 50dB at 1MHz. A typical test circuit is shown below. the specified isolation voltage level. 9. General Information -- The transformers are specifically designed for use in 1.544 Mbps (T1), 2.048 Mbps (CEPT) and ISDN Primary rate (PRI) interface applications. They are matched to the majority of the line interface transceiver ICs currently available. Use of the proper transformer allows the interface circuit to comply with ITU-T G.703 and other standards regarding pulse waveform, return loss, and balance. 10. Common Mode Chokes -- Additional high-frequency 4-line common mode chokes may be used to provide an effective means of complying with national and international regulations on EMI. The common mode chokes are designed to be used in conjunction with Pulse's T1/CEPT transformers as shown in the typical application below. Crosstalk is typically -65 dB or better. HP-8751A P1 P2 50:100 BALUN 5. XFMR 100:50 BALUN Typical Application Crosstalk Attenuation -- In the packages which contain transmit and receive transformers side by side, sufficient crosstalk attenuation is achieved by the inherent characteristics of the toroid cores as well as by their proper positioning. The crosstalk attenuation is typically 65 dB or better. This result was established with the test circuit shown below. HP-8751A 50:100 BALUN P1 P2 100 100 XFMR 6. 100:50 BALUN Return Loss -- ITU-T G.703 and European national regulatory documents specify minimum return loss levels. The transformers will allow these limits to be complied within the situations where they are applicable. Frequency 50-100 kHz 100 kHz-2 MHz 2-3 MHz Transmit 9 dB 15 dB 11 dB Receive 12 dB 18 dB 14 dB Return Loss 7. 8. Surge Voltage Capability - All transformers and chokes meet surge voltage tests according to the most stringent regulatory documents, when used with the proper voltage and current suppression devices: Metallic Voltage: 800 V peak, 10/560sec Longitudinal Voltage: 2,400 V peak, 10/700sec Isolation Voltage -- 100% of transformers are tested during production to USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 62787060 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 3 T622.J (11/09) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Electrical Specifications @ 25C RoHS Compliant Part Number Number of Lines Turns Ratio (5%) OCL (H MIN) CW/W (pF MAX) LL (H MAX) DCR ( MAX) Isolation (Vrms MIN) Package/Schematic HIGH FREQUENCY COMMON MODE CHOKES 16 (8 x 2 line) 1:1 (8 places) 47.0 25 .18 0.40 500 TOU/2 (Surface Mount) PE-65554NL 4 1:1:1:1 24.0 15 .20 0.30 500 IN/1 (Through Hole) PE-65555NL 4 1:1:1:1 8.0 10 .20 0.25 500 IN/1 (Through Hole) PE-65854NL 4 1:1:1:1 47.0 16 .20 0.30 500 SH/1 (Surface Mount) PE-65857NL 4 1:1:1:1 24.0 15 .23 0.30 500 LA/1 (Surface Mount) T8008NL* *NOTE: Please see page 1 for TOU mechanical specifications. Schematic TOU 1 2 2 40 39 3 5 38 36 6 7 35 34 8 10 33 31 11 12 30 29 13 15 28 26 16 17 25 24 18 20 23 21 Mechanicals IN Schematic SH USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 62787060 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 4 T622.J (11/09) T1/E1/CEPT/ISDN-PRI TRANSFORMERS Quad Port T1/E1 with 8 Transformers, 1500 Vrms Mechanical LA Schematic Typical common mode attenuation for high frequency common mode chokes based on a 100 system. SH LA IN Weight . . . . . 0.3 grams. . . . . 2 grams . . 2.5 grams Tape & Reel . . 1500/reel. . . . . 250/reel . . . . . . . (N/A) Tube . . . . . . . . . 25/tube. . . . . 30/tube . . . . . 35/tube Dimensions: Inches mm Unless otherwise specified all tolerances are .010 0,25 For More Information: Pulse Europe Einsteinstrasse 1 12220 World Trade Dr. D-71083 Herrenberg Germany San Diego, CA 92128 U.S.A. Pulse Worldwide Headquarters www.pulseeng.com Tel: 858 674 8100 Fax: 858 674 8262 Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 Tel: 49 7032 7806 0 Tel: 86 755 33966678 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Pulse North China Pulse South Asia Pulse North Asia Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Rd. West Shanghai 200336 China 135 Joo Seng Rd. #03-02 PM Industrial Bldg. Singapore 368363 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6287 8998 3F, No. 198 Zhongyuan Rd. Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: FRE 886 3 43568 20 Pulse: 886 3 4356823 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2009. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 5 T622.J (11/09)