1 of 3
3M™ Heat Shrink Tubing EPS-200
Adhesive-Lined, 2:1, Flexible, Polyolefin
Data Sheet
November 2018
Description
3M™ Heat Shrink Tubing EPS-200 is a 2:1 thin-wall, flexible tubing offering the
advantages of integral, adhesive-lined construction. The tubing is made from flame-
retardant, flexible polyolefin with a thin layer of special thermoplastic adhesive. The
heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow
and excellent adhesion of the inner sealant liner.
When heated in excess of 121ºC (250ºF), 3M EPS-200 tubing rapidly shrinks to a
skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The
adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals.
Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and
water resistant barrier. Adhesive reflow will occur at temperatures above 80ºC
(176ºF).
Agency Approvals &
Self Certifications
Meets the requirements of:
- AS23053/Class 2*
- UL Recognized, File E-39100
- CSA Certified, CSA LR38227
- For RoHS and REACH information, please visit www.3M.com/regs
*Formerly MIL-I-23053/4, MIL-DTL-23053/4 and SAE-AMS-DTL-23053/4
Applications
3M EPS-200 tubing offers convenient protection of electronic components, wire
splices, or bundling of wires. Automotive, truck and marine wiring splices and
connections are quickly and easily protected from harsh environments.
Shrink Ratio
3M EPS-200 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will
shrink 50% of its as-supplied diameter. The recovered wall thickness of the tubing is
proportional to the degree of recovery.
The operating temperature range is from -55ºC (-67ºF) to 110ºC (230ºF), with a
shrinking temperature minimum of 121ºC (250ºF).
Standard Colors
Black
Also available in Clear, Red and Yellow. Price, MOQ and Lead Time will vary for
these colors. Please contact Local Sales Representative or Customer Service
Representative for more information.
NOTE: The clear tubing is not flame retardant or UL listed.
3M™ Heat Shrink Tubing EPS-200
2 of 3
Typical Properties
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (23°C) unless otherwise stated.
Physical Property
Typical Value
US units (metric)
Tensile Strength
2100 PSI
Ultimate Elongation
450%
Longitudinal Change
+1, -5%
Secant Modulus
(2%) 17,000 PSI
Specific Gravity
1.3
Heat Aging (outer wall only)
168 hrs @ 175ºC
Elongation 175%
Heat shock
(outer wall only)
4 hrs @ 225 ºC
No dripping, flowing,
cracking
Low Temperature Flexibility (outer wall only)
4 hrs @ -55 ºC
No cracking
Flammability
Self-extinguishing, meets
UL224 All-Tubing Flame
Test (jacket)
Electrical Property (Test Method)
Typical Value
US units (metric)
Dielectric Strength
800 V/mil
Volume Resistivity
10
14
ohm/cm
Chemical Property (Test Method)
Typical Value
US units (metric)
Corrosion Resistance
(Copper mirror) Non-corrosive
Fungus Resistance
Non-nutrient
Water Absorption
0.3%
Fluid Resistance
Excellent
Adhesive
Typical Value
Peel Strength, pli
Polyethylene
PVC
Lead
Aluminum
30
10
15
40
Corrosive Effect
(Copper mirror) Non-corrosive
3M™ Heat Shrink Tubing EPS-200
3 of 3
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on
information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this
product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product, which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order, shall have no force or
effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase
. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be
liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M
product, regardless of the legal theory asserted.
Austin, TX
800 676.8381
FAX: 800 828.9329
Please recycle
© 3M 2018 All rights reserved
78-8129-9334-9 Rev B
Standard Sizes and
Dimensions
Ordering
Size
(Nominal)
Expanded I.D.
(Minimum)
In. (mm)
Recovered I.D.
(Maximum
In. (mm)
Total Recovered
Wall Thickness
(Nominal)
In. (mm)
Meltable
Recovered Wall
Thickness
In. (mm)
1/8
.125 (3,18)
.063 (1,60)
.027 (0,68)
.004 (0,10)
3/16 .187 (4,75) .093 (2,36) .027 (0,68) .004 (0,10)
1/4 .250 (6,35 .125 (3,18) .030 (0,76) .005 (0,13)
3/8 .375 (9,53) .187 (4,75) .031 (0,79) .005 (0,13)
1/2 .500 (12,70) .250 (6,35) .032 (0,81) .006 (0,15)
3/4 .750 (19,05) .375 (9,53) .037 (0,94) .006 (0,15)
1 1.000 (25,40) .500 (12,70) .046 (1,17) .008 (0,20)
1-1/2 1,500 (38,10) .750 (19,05) .049 (1,24) .008 (0,20)
2 2.000 (50,80) 1.000 (25,40) .060 (1,52) .015 (0,38)
Shelf Life & Storage
3M™ Heat Shrink Tubing EPS-200 has a 10-year shelf life from date of manufacture
when stored in a humidity controlled storage (10°C/50°F to 27°C/80°F and <75%
relative humidity).
Availability
Standard Packaging
Four-foot lengths. Cut pieces and other lengths, including spooled, are available
subject to factory quotation
Please contact your local distributor; available from 3M.com/oem [Where to Buy] or
call 1-800-676-8381.