■ FEATURES
●2 A maximum carrying current
Capable of 2 A maximum continuous carrying current in the
contact
●Superior reliability gold-overlay contacts
P type: Gold-overlay silver-palladium contacts
●International terminal pitch of one inch grid terminal layout
●High sensitivity, low power dissipation types also available
Standard types: 0.45 W (A or B type)
High sensitivity types: 0.2 W (C or E type)
●Conforms to FCC 68.302 (high dielectric strength type)
●UL recognized (File number E63615)
●CSA recognized (File number LR64026)
● RoHS compliant since date code: 0433A
Please see page 5 for more information
(a) Series Name FBR211
(b) Enclosure S: Flux free type
N: Plastic sealed type
A: Standard A type
}
(nominal power 0.45 W type)
(c) Coil Power and Schematics B: Standard B type
C: High sensitivity C type
}
(nominal power 0.2 W type)
E: High sensitivity E type
(d) Nominal Voltage (Example) D003: 3 VDC
D012: 12 VDC (refer to the COIL DATA CHART)
(e) UL Standard Nil : Standard
U : UL114 recognized
(f) Contact Material P : Gold-overlay silver-palladium
M : Gold-overlay silver
(g) Special Type Nil : Standard
2 : High dielectric strength type
(h) CSA Standard Nil : Standard
-CSA : UL114 + CSA recognized (e) is U
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR211SAD005-P
Stamp: 211SAD005-P
■ ORDERING INFORMATION
FBR211 S A D012 U – P 2 (–CSA)
[Example] (a) (b) (c) (d) (e) (f) (g) (h)
FBR211 SERIES
MINIATURE RELAY
1 POLE—1 to 2 A (FOR SIGNAL SWITCHING)
1
RoHS Compliant
2
FBR211 SERIES
Nominal voltage Contact rating
1.5 to 24 VDC 1 A 28 VDC resistive
0.5 A 30 VAC resistive
■ SAFETY STANDARD AND FILE NUMBERS
UL114 (File No. E63615)
C22.2 No. 14 (File No. LR40304 or LR64026)
■ SPECIFICATIONS
Item Standard (A or B type) High sensitive (C or E type)
Contact Arrangement 1 form C (SPDT)
Material Gold-overlay silver-palladium or gold-overlay silver
Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC)
Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC
Maximum Carrying Current 2 A
Maximum Switching Power 60 VA or 28 W
Max. Switching Voltage*1220 VAC or 150 VDC
Maximum Switching Current 1.25 A (AC) or 2 A (DC)
Minimum Switching load*2Plastic sealed 1 mA 1
(reference) Flux free 1 mA 5
Coil Nominal Power (at 20°C) Approximately 0.45 W Approximately 0.2 W
Operate Power (at 20°C) Approximately 0.315 W maximum Approximately 0.14 W maximum
Operating Temperature –25°C to +55°C (no frost) –25°C to +75°C (no frost)
Operating Humidity 45 to 85%RH
Time Value Operate (at nominal voltage) Maximum 5 ms
Release (at nominal voltage) Maximum 5 ms
Insulation Resistance (initial) Minimum 100 MΩ (at 500 VDC)
Dielectric
between coil and contacts
500 VAC 1 minute (standard)
Strength
1,000 VAC 1 minute (high dielectric strength type)
between open contacts
500 VAC 1 minute
Life Mechanical 5 × 106 operations minimum
Electrical 3 × 105 operations minimum (at 1 A/ 28 VDC resistive load)
(Refer to the REFERENCE DATA)
1 × 105 operations minimum (at 2 A/ 12 VDC resistive load)
1 × 105 operations minimum (at 0.5 A/120 VDC resistive load)
Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm)
Shock Misoperation 100 m/s2 (11±1 ms) 60 m/s2 (11±1 ms)
Resistance
Endurance 1,000 m/s2 (11±1 ms)
Weight Approximately 4 g
*1If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The mini-
mum switching load varies with the switching frequency and operation environment.
3
FBR211 SERIES
■ COIL DATA CHART
MODEL
Nominal
Nominal Coil
current
Must Must Maximum
Nominal
Coil
A type B type resistance
(at nominal
operate release allowable
temperature
voltage (
±
10%)
voltage)
voltage voltage voltage
power
rise
Flux free
Plastic sealed
Flux free
Plastic sealed
approx.
FBR211SAD001-■■FBR211NAD001-■■FBR211SBD001-■■FBR211NBD001-■■
1.5 VDC 5 Ω300 mA
FBR211SAD003-■■FBR211NAD003-■■FBR211SBD003-■■FBR211NBD003-■■
3 VDC 20 Ω150 mA
FBR211SAD005-■■FBR211NAD005-■■FBR211SBD005-■■FBR211NBD005-■■
5 VDC 56 Ω 89 mA 70% max. 10% min. 150% of Approx. Approx.
FBR211SAD006-■■FBR211NAD006-■■FBR211SBD006-■■FBR211NBD006-■■
6 VDC 80 Ω 75 mA of nominal of nominal nominal 450 mW 45 deg
voltage voltage voltage (at nominal (at nominal
FBR211SAD009-■■FBR211NAD009-■■FBR211SBD009-■■FBR211NBD009-■■
9 VDC 180 Ω 50 mA voltage) voltage)
FBR211SAD012-■■FBR211NAD012-■■FBR211SBD012-■■FBR211NBD012-■■
12 VDC 320 Ω 38 mA
FBR211SAD024-■■FBR211NAD024-■■FBR211SBD024-■■FBR211NBD024-■■
24 VDC 1,280 Ω 19 mA
Note: All values in the table are measured at 20°C.
MODEL
Nominal
Nominal Coil
current
Must Must Maximum
Nominal
Coil
C type E type resistance
(at nominal
operate release allowable
temperature
voltage (
±
10%)
voltage)
voltage voltage voltage
power
rise
Flux free
Plastic sealed
Flux free
Plastic sealed
approx.
FBR211SCD001-■■FBR211NCD001-■■FBR211SED001-■■FBR211NED001-■■
1.5 VDC 12 Ω125 mA
FBR211SCD003-■■FBR211NCD003-■■FBR211SED003-■■FBR211NED003-■■
3 VDC 45 Ω 67 mA
FBR211SCD005-■■FBR211NCD005-■■FBR211SED005-■■FBR211NED005-■■
5 VDC 120 Ω 42 mA 70% max. 10% min. 225% of Approx. Approx.
FBR211SCD006-■■FBR211NCD006-■■FBR211SED006-■■FBR211NED006-■■
6 VDC 180 Ω 33 mA of nominal of nominal nominal 200 mW 25 deg
voltage voltage voltage (at nominal (at nominal
FBR211SCD009-■■FBR211NCD009-■■FBR211SED009-■■FBR211NED009-■■
9 VDC 400 Ω 23 mA voltage) voltage)
FBR211SCD012-■■FBR211NCD012-■■FBR211SED012-■■FBR211NED012-■■
12 VDC 700 Ω 17 mA
FBR211SCD024-■■FBR211NCD024-■■FBR211SED024-■■FBR211NED024-■■
24 VDC 2,800 Ω 9 mA
Note: All values in the table are measured at 20°C.
2. HIGH SENSITIVITY (C or E type)
■ CHARACTERISTIC DATA
1. STANDARD (A or B type)
70
80
90
100
110
120
130
140
150
160
0 10203040506070–10
Operating voltage range
Must operate voltage
Range of operation temperature and voltage
(Standard 0.45 W type)
Operating temperature (˚C)
80
Maximum allowable coil voltage
70
80
90
100
110
120
130
140
150
160
0 10203040506070–10
Operating voltage range
Must operate voltage
Operating temperature (˚C)
80
(Data) assumes that
the maximum allow-
able temperature
of E type insula-
tion coil is
115˚C
00.2 0.4 0.6 0.8
1
2
3
4
5
Not including bounce time
Coil power (W)
Operate and release time data
Time (msec)
(Data) assumes that
the maximum allow-
able temperature
of E type insula-
tion coil is 115˚C
Nominal voltage multiplying factor (%)
Range of operation temperature and voltage
(high sensitive 0.2 W type)
Release time
Operate time
Nominal voltage multiplying factor (%)
Maximum allowable coil voltage
0.1
10 20 30 50 120
0.3
0.5
1.0
➁➀
Maximum switching capacity
Contact load current (A)
12 V DC
resistive load
28 V DC
resistive load
Life curve
Service life (operations)
10.50 1.0 1.5 2.0
5
10
50
100
200
(x10 )
4
Contact load current (A)
120 V AC
resistive load
20
30
40
50
60
70
0.4 0.6 0.80.2
➀➁
(at 20˚C)
➀Standard
(0.45 W type)
➁High sensitive
(0.2 W type)
Coil power (W)
Coil temperature rise data
Coil temperature rise (˚C)
Contact load current (A)
➀
AC resistive load
( AC contact rating)
➁
DC resistive load
( DC contact rating)
4
FBR211 SERIES
■ REFERENCE DATA
■ DIMENSIONS
10.1 15.1
0.35
●Schematics (BOTTOM VIEW)
0.6
(1.2) 10.16
3.2
2.54
5
8
●Dimensions
6
7
1
12
(A type or C type)
5
8
6
7
1
12
7.62 (1.24)
10.5
+
0.5
0.3
+0.5 +0.5
(B type or E type)
11.7 16.5
●Dimensions
0.6
(1.9) 10.16
3.2
2.54
5
8
6
7
1
12
(A type or C type)
5
8
6
7
1
12
7.62 (2.04)
10.7+
0.5
0.3
●Schematics (BOTTOM VIEW)
+0.5 +0.5 (B type or E type)
7.62
6–ø1.0
10.16
●PC board mounting hole layout (BOTTOM VIEW)
2.54
1. STANDARD (Flux free type)
2. N-TYPE (Plastic sealed type)
3. PC BOARD MOUNTING HOLE LAYOUT
Unit: mm
FBR211
n = 100 Operate
Release
Distribution of operate and release voltage
Nominal voltage multiplying factor (%)
60
50
40
20
30
10
01020304050607080
0
Distribution (%)
FBR211
n = 100
Operate
Release
Distribution of operate and release time
Time (ms)
100
80
60
20
40
012345678
0
Contact resistance (mΩ)
Distribution of contact resistance
FBR211
n = 100
80
60
40
20
01020304050607080
0
Distribution (%)
Distribution (%)
5
FBR211 SERIES
1. General Information
●Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf)
●Lead free solder paste used in relays is Sn-3.0Ag-0.5Cu
●Most signal and some power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that
are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE).
●It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
●“LF” is marked on each outer and inner carton. (No marking on individual relays).
●To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
We will ship leaded relays as long as the leaded relay inventory exists.
2. Recommended Lead Free Solder Profile
●Recommended solder paste Sn-3.0Ag-0.5Cu
RoHS Compliance and Lead Free Relay Information
Reflow Solder condtion
3. Moisture Sensitivity
●Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
●SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house
test.
Flow Solder condtion:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.
max. 120 sec.
90~120 sec. 20~30 sec.
(duration)
Cooling
Pre-heating
Soldering
Peak Temp.: max. 250˚C
250
220
130
170
temperature (˚C)
We highly recommend that you confirm your actual solder conditions
6
FBR211 SERIES
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 11/10/2004.
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
