MINIATURE RELAY 1 POLE--1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES RoHS Compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay contacts P type: Gold-overlay silver-palladium contacts International terminal pitch of one inch grid terminal layout High sensitivity, low power dissipation types also available Standard types: 0.45 W (A or B type) High sensitivity types: 0.2 W (C or E type) Conforms to FCC 68.302 (high dielectric strength type) UL recognized (File number E63615) CSA recognized (File number LR64026) RoHS compliant since date code: 0433A Please see page 5 for more information ORDERING INFORMATION [Example] FBR211 S A (a) (b) (c) D012 (d) U - P (e) (f ) 2 (g) (-CSA) (h) (a) Series Name FBR211 (b) Enclosure S: Flux free type N: Plastic sealed type (c) Coil Power and Schematics A: Standard A type (nominal power 0.45 W type) B: Standard B type C: High sensitivity C type (nominal power 0.2 W type) E: High sensitivity E type (d) Nominal Voltage (Example) D003: 3 VDC D012: 12 VDC (refer to the COIL DATA CHART) (e) UL Standard Nil : Standard U : UL114 recognized (f ) Contact Material P : Gold-overlay silver-palladium M : Gold-overlay silver (g) Special Type Nil : Standard 2 : High dielectric strength type (h) CSA Standard Nil : Standard -CSA : UL114 + CSA recognized (e) is U } } Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR211SAD005-P Stamp: 211SAD005-P 1 FBR211 SERIES SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) Nominal voltage Contact rating 1 A 28 VDC resistive 0.5 A 30 VAC resistive 1.5 to 24 VDC SPECIFICATIONS Item Contact Coil Time Value Insulation Life Other Standard (A or B type) High sensitive (C or E type) Arrangement 1 form C (SPDT) Material Gold-overlay silver-palladium or gold-overlay silver Resistance (initial) Maximum 100 m (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC Maximum Carrying Current 2A Maximum Switching Power 60 VA or 28 W Max. Switching Voltage*1 220 VAC or 150 VDC Maximum Switching Current 1.25 A (AC) or 2 A (DC) Minimum Switching load*2 (reference) Plastic sealed 1 mA 1 Flux free 1 mA 5 Nominal Power (at 20C) Approximately 0.45 W Approximately 0.2 W Operate Power (at 20C) Approximately 0.315 W maximum Approximately 0.14 W maximum Operating Temperature -25C to +55C (no frost) -25C to +75C (no frost) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 5 ms Resistance (initial) Minimum 100 M (at 500 VDC) Dielectric Strength between coil and contacts 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) between open contacts 500 VAC 1 minute Mechanical 5 x 106 operations minimum Electrical (Refer to the REFERENCE DATA) 3 x 105 operations minimum (at 1 A/ 28 VDC resistive load) 1 x 105 operations minimum (at 2 A/ 12 VDC resistive load) 1 x 105 operations minimum (at 0.5 A/120 VDC resistive load) Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Resistance Misoperation 100 m/s2 (111 ms) Endurance 1,000 m/s2 (111 ms) Weight 60 m/s 2 (111 ms) Approximately 4 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR211 SERIES COIL DATA CHART 1. STANDARD (A or B type) MODEL Nominal current Must Coil Nominal B type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. A type Flux free Plastic sealed FBR211SAD001- FBR211NAD001- FBR211SBD001- FBR211NBD001- 1.5 VDC 5 300 mA FBR211SAD003- FBR211NAD003- FBR211SBD003- FBR211NBD003- 3 VDC 20 150 mA FBR211SAD005- FBR211NAD005- FBR211SBD005- FBR211NBD005- 5 VDC 56 89 mA FBR211SAD006- FBR211NAD006- FBR211SBD006- FBR211NBD006- 6 VDC 80 75 mA FBR211SAD009- FBR211NAD009- FBR211SBD009- FBR211NBD009- 9 VDC 180 50 mA FBR211SAD012- FBR211NAD012- FBR211SBD012- FBR211NBD012- 12 VDC 320 38 mA FBR211SAD024- FBR211NAD024- FBR211SBD024- FBR211NBD024- 24 VDC Note: All values in the table are measured at 20C. 1,280 19 mA Must release voltage 70% max. 10% min. of nominal of nominal voltage voltage Maximum allowable voltage Coil Nominal temperature power rise 150% of Approx. Approx. nominal 450 mW 45 deg voltage (at nominal (at nominal voltage) voltage) 2. HIGH SENSITIVITY (C or E type) MODEL Nominal current Must Coil Nominal E type resistance (at nominal operate voltage voltage) voltage (10%) Flux free Plastic sealed approx. C type Flux free Plastic sealed 12 125 mA 3 VDC 45 67 mA 5 VDC 120 42 mA FBR211SCD006- FBR211NCD006- FBR211SED006- FBR211NED006- 6 VDC 180 33 mA FBR211SCD009- FBR211NCD009- FBR211SED009- FBR211NED009- 9 VDC 400 23 mA FBR211SCD012- FBR211NCD012- FBR211SED012- FBR211NED012- 12 VDC 700 17 mA FBR211SCD024- FBR211NCD024- FBR211SED024- FBR211NED024- 24 VDC 2,800 9 mA FBR211SCD001- FBR211NCD001- FBR211SED001- FBR211NED001- 1.5 VDC FBR211SCD003- FBR211NCD003- FBR211SED003- FBR211NED003- FBR211SCD005- FBR211NCD005- FBR211SED005- FBR211NED005- Must release voltage 70% max. 10% min. of nominal of nominal voltage voltage Maximum allowable voltage Coil Nominal temperature power rise 225% of Approx. Approx. nominal 200 mW 25 deg voltage (at nominal (at nominal voltage) voltage) Note: All values in the table are measured at 20C. CHARACTERISTIC DATA Operating voltage range Must ltage te vo opera -10 0 10 20 30 40 50 60 70 80 60 50 40 30 20 0.2 0.4 0.6 0.8 Coil power (W) Op era te 3 Standard (0.45 W type) High sensitive (0.2 W type) tim e 2 Release time 80 70 Must 1 ltage te vo opera 0 0.2 AC resistive load ( AC contact rating) DC resistive load ( DC contact rating) 1.0 0.5 0.3 20 30 50 120 Contact load current (A) 0.6 0.8 Life curve (x104) 200 100 50 12 V DC resistive load 10 5 120 V AC resistive load 0.1 10 0.4 Coil power (W) Maximum switching capacity Contact load current (A) Coil temperature rise (C) 110 100 90 4 Operating temperature (C) Coil temperature rise data (at 20C) Operating voltage range -10 0 10 20 30 40 50 60 70 80 Operating temperature (C) 70 140 130 120 Not including bounce time Service life (operations) 80 70 (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 160 150 Operate and release time data 5 Time (msec) Nominal voltage multiplying factor (%) e ag olt il v co le ab ow all 140 130 120 ge volta coil able llow ma imu Max (Data) assumes that the maximum allowable temperature of E type insulation coil is 115C 160 150 110 100 90 Range of operation temperature and voltage (high sensitive 0.2 W type) um xim Ma Nominal voltage multiplying factor (%) Range of operation temperature and voltage (Standard 0.45 W type) 1 0 0.5 1.0 28 V DC resistive load 1.5 2.0 Contact load current (A) 3 FBR211 SERIES REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time 60 FBR211 n = 100 Release 40 30 FBR211 n = 100 60 Distribution (%) 80 Distribution (%) Distribution (%) FBR211 n = 100 Operate Release Operate 50 Distribution of contact resistance 80 100 60 40 40 20 20 20 10 0 0 0 0 10 20 30 40 50 60 70 0 80 1 2 3 Nominal voltage multiplying factor (%) 4 5 6 7 0 8 10 20 30 40 50 60 70 80 Contact resistance (m) Time (ms) DIMENSIONS 1. STANDARD (Flux free type) Dimensions Schematics (BOTTOM VIEW) (A type or C type) +0.5 15.1 0.3 7.62 (1.24) 0.6 0.35 (1.2) 10.16 1 5 6 1 5 6 12 8 7 12 8 7 2.54 2. N-TYPE (Plastic sealed type) Dimensions 11.7 +0.5 Schematics (BOTTOM VIEW) (A type or C type) +0.5 (B type or E type) 1 5 6 1 5 6 12 8 7 12 8 7 3.2 10.7+0.5 16.5 0.3 (B type or E type) 3.2 10.5+0.5 10.1 +0.5 0.6 7.62 (2.04) (1.9) 10.16 2.54 3. PC BOARD MOUNTING HOLE LAYOUT PC board mounting hole layout (BOTTOM VIEW) 7.62 6-o1.0 10.16 2.54 Unit: mm 4 FBR211 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf) Lead free solder paste used in relays is Sn-3.0Ag-0.5Cu Most signal and some power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE). It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). "LF" is marked on each outer and inner carton. (No marking on individual relays). To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. We will ship leaded relays as long as the leaded relay inventory exists. 2. Recommended Lead Free Solder Profile Recommended solder paste Sn-3.0Ag-0.5Cu Reflow Solder condtion Flow Solder condtion: Peak Temp.: max. 250C Soldering temperature (C) 250 Pre-heating: Soldering: maximum 120C dip within 5 sec. at 260C soler bath Solder by Soldering Iron: 220 Cooling Pre-heating 170 Soldering Iron Temperature: maximum 360C Duration: maximum 3 sec. 130 90~120 sec. max. 120 sec. 20~30 sec. (duration) We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house test. 5 FBR211 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/10/2004. 6