LM337T/NOPB - NATIONAL SEMICONDUCTOR

LM137,LM337

LM137/LM337 3-Terminal Adjustable Negative Regulators

Literature Number: SNVS778C

LM137/LM337

3-Terminal Adjustable Negative Regulators

General Description

The LM137/LM337 are adjustable 3-terminal negative volt-

age regulators capable of supplying in excess of −1.5A over

an output voltage range of −1.2V to −37V. These regulators

are exceptionally easy to apply, requiring only 2 external

resistors to set the output voltage and 1 output capacitor for

frequency compensation. The circuit design has been opti-

mized for excellent regulation and low thermal transients.

Further, the LM137 series features internal current limiting,

thermal shutdown and safe-area compensation, making

them virtually blowout-proof against overloads.

The LM137/LM337 serve a wide variety of applications in-

cluding local on-card regulation, programmable-output volt-

age regulation or precision current regulation. The LM137/

LM337 are ideal complements to the LM117/LM317

adjustable positive regulators.

Features

nOutput voltage adjustable from −1.2V to −37V

n1.5A output current guaranteed, −55˚C to +150˚C

nLine regulation typically 0.01%/V

nLoad regulation typically 0.3%

nExcellent thermal regulation, 0.002%/W

n77 dB ripple rejection

nExcellent rejection of thermal transients

n50 ppm/˚C temperature coefficient

nTemperature-independent current limit

nInternal thermal overload protection

Product Enhancement tested

nStandard 3-lead transistor package

nOutput is short circuit protected

LM137 Series Packages and Power Capability

Rated Design

Device Package Power Load

Dissipation Current

LM137/337 TO-3 (K) 20W 1.5A

TO-39 (H) 2W 0.5A

LM337 TO-220 (T) 15W 1.5A

LM337 SOT-223

(MP)

2W 1A

Typical Applications

Adjustable Negative Voltage Regulator

00906701

Full output current not available at high input-output voltages

†C1=1µFsolid tantalum or 10 µF aluminum electrolytic required for

stability

*C2=1µFsolid tantalum is required only if regulator is more than 4" from

power-supply filter capacitor

Output capacitors in the range of 1 µF to 1000 µF of aluminum or tantalum

electrolytic are commonly used to provide improved output impedance and

rejection of transients

Comparison between SOT-223 and

D-Pak (TO-252) Packages

00906731

Scale 1:1

November 2004

LM137/LM337 3-Terminal Adjustable Negative Regulators

Absolute Maximum Ratings (Notes 1,

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Power Dissipation Internally Limited

Input-Output Voltage Differential 40V

Operating Junction Temperature

Range

LM137 −55˚C to +150˚C

LM337 0˚C to +125˚C

LM337I −40˚C to +125˚C

Storage Temperature −65˚C to +150˚C

Lead Temperature (Soldering, 10 sec.) 300˚C

Plastic Package (Soldering, 4 sec.) 260˚C

ESD Rating 2k Volts

Electrical Characteristics (Note 1)

Parameter Conditions LM137 LM337 Units

Min Typ Max Min Typ Max

Line Regulation T

= 25˚C, 3V ≤|V

−V

OUT

|≤40V 0.01 0.02 0.01 0.04 %/V

(Note 2) I

=10mA

Load Regulation T

= 25˚C, 10 mA ≤I

OUT

≤I

MAX

0.3 0.5 0.3 1.0 %

Thermal Regulation T

= 25˚C, 10 ms Pulse 0.002 0.02 0.003 0.04 %/W

Adjustment Pin Current 65 100 65 100 µA

Adjustment Pin Current Charge 10 mA ≤I

≤I

MAX

25 25µA

3.0V ≤|V

−V

OUT

|≤40V,

= 25˚C

Reference Voltage T

= 25˚C (Note 3) −1.225 −1.250 −1.275 −1.213 −1.250 −1.287 V

3V ≤|V

−V

OUT

|≤40V, (Note 3) −1.200 −1.250 −1.300 −1.200 −1.250 −1.300 V

10 mA ≤I

OUT

≤I

MAX

,P≤P

MAX

Line Regulation 3V ≤|V

−V

OUT

|≤40V, (Note 2) 0.02 0.05 0.02 0.07 %/V

Load Regulation 10 mA ≤I

OUT

≤I

MAX

, (Note 2) 0.3 1 0.3 1.5 %

Temperature Stability T

MIN

≤T

MAX

0.6 0.6 %

Minimum Load Current |V

−V

OUT

|≤40V 2.5 5 2.5 10 mA

−V

OUT

|≤10V 1.2 3 1.5 6 mA

Current Limit |V

−V

OUT

|≤15V

K, MP and T Package 1.5 2.2 3.5 1.5 2.2 3.7 A

H Package 0.5 0.8 1.8 0.5 0.8 1.9 A

−V

OUT

| = 40V, T

= 25˚C

K, MP and T Package 0.24 0.4 0.15 0.4 A

H Package 0.15 0.17 0.10 0.17 A

RMS Output Noise, % of V

OUT

= 25˚C, 10 Hz ≤f≤10 kHz 0.003 0.003 %

Ripple Rejection Ratio V

OUT

= −10V, f = 120 Hz 60 60 dB

ADJ

=10µF 66 77 66 77 dB

Long-Term Stability T

= 125˚C, 1000 Hours 0.3 1 0.3 1 %

Thermal Resistance, Junction to

Case

H Package 12 15 12 15 ˚C/W

K Package 2.3 3 2.3 3 ˚C/W

T Package 4 ˚C/W

Thermal Resistance, Junction to

Ambient (No Heat Sink)

H Package 140 140 ˚C/W

K Package 35 35 ˚C/W

T Package

MP Package

170

˚C/W

Note 1: Unless otherwise specified, these specifications apply −55˚C ≤Tj≤+150˚C for the LM137, 0˚C ≤Tj≤+125˚C for the LM337; VIN −V

OUT = 5V; and IOUT

= 0.1A for the TO-39 package and IOUT = 0.5A for the TO-3, SOT-223 and TO-220 packages. Although power dissipation is internally limited, these specifications

are applicable for power dissipations of 2W for the TO-39 and SOT-223 (see Application Hints), and 20W for the TO-3, and TO-220. IMAX is 1.5A for the TO-3,

SOT-223 and TO-220 packages, and 0.2A for the TO-39 package.

Note 2: Regulation is measured at constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are

covered under the specification for thermal regulation. Load regulation is measured on the output pin at a point

⁄

" below the base of the TO-3 and TO-39 packages.

Note 3: Selected devices with tightened tolerance reference voltage available.

LM137/LM337

www.national.com 2

Electrical Characteristics (Note 1) (Continued)

Note 4: Refer to RETS137H drawing for LM137H or RETS137K drawing for LM137K military specifications.

Schematic Diagram

00906702

Thermal Regulation

When power is dissipated in an IC, a temperature gradient

occurs across the IC chip affecting the individual IC circuit

components. With an IC regulator, this gradient can be es-

pecially severe since power dissipation is large. Thermal

regulation is the effect of these temperature gradients on

output voltage (in percentage output change) per Watt of

power change in a specified time. Thermal regulation error is

independent of electrical regulation or temperature coeffi-

cient, and occurs within 5 ms to 50 ms after a change in

power dissipation. Thermal regulation depends on IC layout

as well as electrical design. The thermal regulation of a

voltage regulator is defined as the percentage change of

OUT

, per Watt, within the first 10 ms after a step of power is

applied. The LM137’s specification is 0.02%/W, max.

00906703

LM137, VOUT = −10V

VIN −V

OUT = −40V

IIL =0A→0.25A →0A

Vertical sensitivity, 5 mV/div

FIGURE 1.

LM137/LM337

www.national.com3

Thermal Regulation (Continued)

In Figure 1, a typical LM137’s output drifts only 3 mV (or

0.03% of V

OUT

= −10V) when a 10W pulse is applied for

10 ms. This performance is thus well inside the specification

limit of 0.02%/W x 10W = 0.2% max. When the 10W pulse is

ended, the thermal regulation again showsa3mVstep at

the LM137 chip cools off. Note that the load regulation error

of about 8 mV (0.08%) is additional to the thermal regulation

error. In Figure 2, when the 10W pulse is applied for 100 ms,

the output drifts only slightly beyond the drift in the first

10 ms, and the thermal error stays well within 0.1% (10 mV).

Connection Diagrams

TO-3

Metal Can Package

TO-39

Metal Can Package

00906705

Case is Input

Bottom View

Order Number LM137K/883

LM137KPQML and LM137KPQMLV(Note 5)

See NS Package Number K02C

Order Number LM337K STEEL

See NS Package Number K02A

00906706

Case Is Input

Note 5: See STD Mil DWG 5962P99517 for Radiation Tolerant Devices

Bottom View

Order Number LM137H, LM137H/883 or LM337H

LM137HPQML and LM137HPQMLV(Note 5)

See NS Package Number H03A

00906704

LM137, VOUT = −10V

VIN −V

OUT = −40V

IL=0A→0.25A →0A

Horizontal sensitivity, 20 ms/div

FIGURE 2.

LM137/LM337

www.national.com 4

Connection Diagrams (Continued)

TO-220

Plastic Package 3-Lead SOT-223

00906707

Front View

Order Number LM337T

See NS Package Number T03B

00906734

Front View

Order Number LM337IMP

Package Marked N02A See NS Package Number MP04A

Application Hints

When a value for θ

(H−A)

is found using the equation shown,

a heatsink must be selected that has a value that is less than

or equal to this number.

HEATSINKING SOT-223 PACKAGE PARTS

The SOT-223 (“MP”) packages use a copper plane on the

PCB and the PCB itself as a heatsink. To optimize the heat

sinking ability of the plane and PCB, solder the tab of the

package to the plane.

Figures 3, 4 show the information for the SOT-223 package.

Figure 4 assumes a θ

(J−A)

of 75˚C/W for 1 ounce copper and

51˚C/W for 2 ounce copper and a maximum junction tem-

perature of 125˚C.

Please see AN1028 for power enhancement techniques to

be used with the SOT-223 package.

00906732

FIGURE 3. θ

(J−A)

vs Copper (2 ounce) Area for the

SOT-223 Package

00906733

FIGURE 4. Maximum Power Dissipation vs. T

AMB

for

the SOT-223 Package

LM137/LM337

www.national.com5

Typical Applications

Adjustable Lab Voltage Regulator

00906709

Full output current not available

at high input-output voltages

*The 10 µF capacitors are optional to improve ripple rejection

Current Regulator

00906711

Negative Regulator with Protection Diodes

00906713

*When CLis larger than 20 µF, D1 protects the LM137 in case the input

supply is shorted

**When C2 is larger than 10 µF and −VOUT is larger than −25V, D2

protects the LM137 in case the output is shorted

−5.2V Regulator with Electronic Shutdown*

00906710

*Minimum output .−1.3V when control input is low

Adjustable Current Regulator

00906712

High Stability −10V Regulator

00906714

LM137/LM337

www.national.com 6

Typical Performance Characteristics (K Steel and T Packages)

Load Regulation Current Limit

00906716 00906717

Adjustment Current Dropout Voltage

00906718 00906719

Temperature Stability Minimum Operating Current

00906720 00906721

LM137/LM337

www.national.com7

Typical Performance Characteristics (K Steel and T Packages) (Continued)

Ripple Rejection Ripple Rejection

00906722 00906723

Ripple Rejection Output Impedance

00906724 00906725

Line Transient Response Load Transient Response

00906726 00906727

LM137/LM337

www.national.com 8

Physical Dimensions inches (millimeters)

unless otherwise noted

Metal Can Package (H)

Order Number LM137H, LM137H/883 or LM337H

NS Package Number H03A

LM137/LM337

www.national.com9

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

Metal Can Package (K)

Order Number LM337K STEEL

NS Package Number K02A

Mil-Aero Metal Can Package (K)

Order Number LM137K/883

NS Package Number K02C

LM137/LM337

www.national.com 10

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

3-Lead SOT-223 Package

Order Number LM337IMP

NS Package Number MP04A

LM137/LM337

www.national.com11

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

TO-220 Plastic Package (T)

Order Number LM337T

NS Package Number T03B

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves

the right at any time without notice to change said circuitry and specifications.

For the most current product information visit us at www.national.com.

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS

WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR

CORPORATION. As used herein:

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body, or

(b) support or sustain life, and whose failure to perform when

properly used in accordance with instructions for use

provided in the labeling, can be reasonably expected to result

in a significant injury to the user.

2. A critical component is any component of a life support

device or system whose failure to perform can be reasonably

expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

BANNED SUBSTANCE COMPLIANCE

National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship

Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ‘‘Banned

Substances’’ as defined in CSP-9-111S2.

National Semiconductor

Americas Customer

Support Center

Email: new.feedback@nsc.com

Tel: 1-800-272-9959

National Semiconductor

Europe Customer Support Center

Fax: +49 (0) 180-530 85 86

Email: europe.support@nsc.com

Deutsch Tel: +49 (0) 69 9508 6208

English Tel: +44 (0) 870 24 0 2171

Français Tel: +33 (0) 1 41 91 8790

National Semiconductor

Asia Pacific Customer

Support Center

Email: ap.support@nsc.com

National Semiconductor

Japan Customer Support Center

Fax: 81-3-5639-7507

Email: jpn.feedback@nsc.com

Tel: 81-3-5639-7560

www.national.com

LM137/LM337 3-Terminal Adjustable Negative Regulators

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should

obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are

sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,

or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information

published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual

property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive

business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all

express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not

responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably

be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing

such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products

and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be

provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in

such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at

the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are

designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated

products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Audio www.ti.com/audio Communications and Telecom www.ti.com/communications

Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers

Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps

DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy

DSP dsp.ti.com Industrial www.ti.com/industrial

Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical

Interface interface.ti.com Security www.ti.com/security

Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Mobile Processors www.ti.com/omap

Wireless Connectivity www.ti.com/wirelessconnectivity

TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265